technical drawing in photonics lesson 3 drawing of regular polygons. perimeter of a circle....
Post on 17-Jan-2018
221 Views
Preview:
DESCRIPTION
TRANSCRIPT
Technical Drawing in Photonics
Lesson 3
Drawing of regular polygons.Perimeter of a circle.
TAMOP-4.1.1.C-12/1/KONV-2012-0005 project „Preparation of the concerned sectors for educational and R&D activities related to the Hungarian ELI project”
Dr. Zsolt István Benkő
Technical drawing in Photonics
Lesson 3
Drawing of a squareThe side is given
Technical drawing in Photonics
Lesson 3
Drawing of a squareThe side is given
Technical drawing in Photonics
Lesson 3
Drawing of a squareThe side is given
Technical drawing in Photonics
Lesson 3
Drawing of a squareinside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a squareinside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a squareoutside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a squareoutside a given circle
Technical drawing in Photonics
Lesson 3
The same technique can be used for every regular polygons:
The sectioning points can be drawn on the circle.
If the polygon is inside the circle then the these points should be connected.
If the polygon is outside the circle then tangents should be drawn at these points.
From this point on only the polygons inside a given circle are drawn.
Technical drawing in Photonics
Lesson 3
Drawing of a regular octagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular hexagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular hexagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular hexagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular triangleinside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular triangleinside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular pentagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular pentagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular pentagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular pentagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular heptagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular heptagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular heptagoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular N-sided polygoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular N-sided polygoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular N-sided polygoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular N-sided polygoninside a given circle
Drawing of a regular N-sided polygoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing of a regular N-sided polygoninside a given circle
Technical drawing in Photonics
Lesson 3
Drawing the (half) perimeter of a given circle
Technical drawing in Photonics
Lesson 3
Drawing the (half) perimeter of a given circle
30o
Technical drawing in Photonics
Lesson 3
Drawing the (half) perimeter of a given circle
3R
Technical drawing in Photonics
Lesson 3
Drawing the (half) perimeter of a given circle
3R
R
Technical drawing in Photonics
Lesson 3
Dividing a given circle into 12 parts
Technical drawing in Photonics
Lesson 3
Dividing a given circle into 12 parts
Technical drawing in Photonics
Lesson 3
References
1. Ocskó Gy., Seres F.: Gépipari szakrajz, Skandi-Wald Könyvkiadó, Budapest, 2004
2. Lőrincz P., Petrich G.: Ábrázoló geometria, Nemzeti Tankönyvkiadó Rt., Budapest, 1998
3. Pintér M.: AutoCAD tankönyv és példatár, ComputerBooks, Budapest, 2006
top related