tabaq box for tang band 3” - coolcat.dk box cabinet build.pdf · tabaq box for tang band 3” by...
Post on 19-Jul-2020
42 Views
Preview:
TRANSCRIPT
TABAQ BOX for Tang Band 3” By Bjørn Johannesen, bjohannesen@post.cybercity.dk Please find the cutting plan for TABAQ in a folded version. Please note that the BSC is different from the original TABAQ has the cabinet has a different shape. TABAQ is designed by Bjørn Johannesen with software by Martin J. King ©
1,2 cm MDF. Cut in cm: 2 pcs. 44,1 x 14,4 (front, back) 2 pcs. 44,1 x 22.6 (sides) 1 pcs. 12 x 31 (internal wall) 1 pcs. 12 x 22,6 (bottom) 1 pcs. 12 x 21,3 (top) 1 pcs. 12 x 8,5 (opening) 1 pcs. 12 x 8,2 (opening) Opening and the last 25 cm of the line are not stuffed. Total stuffing 107 g. Baffle Step filter: 1,5 mH and 6,7 ohm in parallel.
1,3 cm
14,4 cm
25 cm
44,1 cm
10,7 cm 10,7 cm
10,7 cm
31 cm
9,7 cm
27,2 cm
22,6 cm
12 cm
1,2 cm
The sides are 9 mm plywood and 3 mm black Acryl in my cabinet. You can place the cabinet upside down or any other position as long as the opening is not blocked.
top related