summit brake lathe accessories - autoquip australia · ammco pa/062-10 ammco style negative rake...

Sum

mit

Bra

ke L

athe

Acc

esso

ries

Carbide Cutting TipsLathe Brand Picture Description For Use On:

Accu-TurnPA/060-10

Accu-Turn Style Positive Rake Bit For Disc, Drum & Flywheel Lathes

Pack Of 10

8911 89228944 89898991 8993

AmmcoPA/062-10

Ammco Style Negative Rake Bits For Disc & Drum Lathes

Pack Of 10

1000 10013000 40004100 7000

Pro-CutPA/069-10

Pro Cut Style Positive Rake Bits For On Car LathesPack Of 10

PFM 9.0PFM 9.2

Hunger & Ammco

PA/070-10

Hunger & Ammco Carbide Cutting Tips

Pack Of 10

Hunger E326aAmmco 3850Ammco 6900

FMC, JBC & West

PA/407-10

FMC/JBC/West Positive Rake Bits For Disc & Drum Lathes

Pack Of 10

FMC 400 - 700&

West 1115

Silencer Bands For Solid Rotors

Silencer Bands For Vented Rotors

Large Silencer BandSolid Disc

229 mm DiameterPA/94

Hollow latex tube with noise reducing material inside.

Small Silencer BandSolid Disc

152 mm DiameterPA/96

Large Silencer BandVented Disc

229 mm DiameterPA/935

Latex tubing with internal weights inside the band for effective vibration dampening.

Small Silencer BandVented Disc

178 mm DiameterPA/936

Adaptor Specifications

2 x Bell Clamp 165 mm OD

1 x Centering Cone 94 - 133 mm

1 x Centering Cone 115 - 140 mm

1 x Double Tapered Collet 71 - 81 mm

1 x Double Tapered Collet 81 - 90 mm

1 x Mounting Spring -

To Suit Off-Car Brake Lathes With 1” Arbor.

PA/41-1

E & OE

Chatter Depressing Silencers Silencer Band For DrumsThese Chatter Depressing Silencers are

designed to reduce chattering when machining rotors.

Pro-CutDesigned specifically for

Pro-CutPA/71B

StandardFor on & off car

brake lathesPA/70B

Drum Silencer Band For Cars & 4WDNatural Rubber With Riveted Buckle

Size:182 cm Long4.5 cm Wide

PA/80B

Hubless Rotor Adaptors

Light Commercial Adaptor Kit

Designed for the fast & accurate mounting of hubless rotors.

Perfect for Off-Car brake lathes.d

Kits available for passenger vehicles & light commercials.

For Passenger VehiclesPA/91

For Passenger Vehicles & Light Commercial

PA/91LTS

This kit assists in the correct mounting of disc’s & drums for 4WD & light commercial vehicles.

Summit Brake Lathe Accessories

Centering Cone Specifications

No.1 Centering Cone 54 - 82 mm

No.2 Centering Cone 80 - 108 mm

No.3 Centering Cone 105 - 133 mm

No.4 Centering Cone 130 - 157 mm

No.1

No.2No.1

No.2No.3

No.4

Unit 4 / 36 Peachtree RoadPenrith, New South Wales, 2750

www.autoquip.com.auAutoquip Australia

Phone: 02 4721 0633 Fax: 02 4721 0733