sumit nair portfolio
Post on 22-Jan-2015
869 Views
Preview:
DESCRIPTION
TRANSCRIPT
Portfolio
Sumit Nair
Bachelor of Design in Product DesignDepartment Of DesignIndian Institute of Technology Guwahati (IIT)
Master of Science in Mechanical EngineeringMechatronics specializationSan Jose State University
Contact:sumitnair1@gmail.com, sumit.nair@students.sjsu.eduPhone: 510-717-4069
Design & Development of an Automatic TCM Wrist Pulse Meter
01
Projects
Based on the cornerstone of the diagnostic methods used in TCM (Traditional Chinese Medicine), a wrist pulse meter was designed to sense 17 pulse characteristics and present data to Chinese practitioners.
Pulse measuring approach in TCM and the Flexiforce sensor defined the design constraints. Brainstorming lead to 2 distinct ‘basic structures’; of which one design direction was pursued
® TCM pulse diagnosis http://www.diemsacupuncture.com
Concept Direction 1 Concept Direction 2
After researching TCM, sensor was acquired and tested against required specifications.
Design & Development of an Automatic TCM Wrist Pulse Meter
02
Projects
The finger tip used PVC for rigid & flexible support. Margin of safety (determined through FEA) was 1.84, proving the design flexibility whereas results from pulse readings with the finger tip were observed on oscilloscope
Insights gained from mock-up prototypes; hand covering to avoid sensor strain & eliminate body electrical noise but a glove wont fit all sizes.
Thus, the final proposed design had nitrile coated cloth with a Velcro strap to accommodate various hand sizes.
Handcrafted Texturing and Detailing for eco-friendly Furniture
03
This project was carried out in Elephant Design Private Limited, Pune. The client was EDIDA AWARDS.
The challenge was to make it competitive with existing products and still be ecofriendly. Texture and table tops were flexible for user to adjust as per his/her chioce.
The texture and detailing for the furniture were made in such a way so that the best possible method to manufacture them is with the help of hands. With the intention of encouraging the handicraft industry these constraints were built-in in coordination with the handicraft tailors. The final 3 options were selected after exploring various possibilities.
Work Experience
The theme had to follow the characteristics of the brand, namely excitement, technology and novelty in the communica-tion service provided. The retail outlet was also an oppurtunity to create a standout experince which leaves a lasting impression in accordance with the brand.
Project completed at EDPL, Pune for the client Aircel.
Retail Outlet & Interior Design for a telecommunication service provider
04
With a foresight for accomodat-ing the various kinds of layout and spaces varying from one retail outlet to the next the generic design had to be created. The design of the store should still be united under one umbrella of theme and look.
The smooth flow of the custom-ers and ease of navigation within the store needed to be maintained.
Work Experience
Through a form which was simple to create yet had the elements of the exhibition to become a part of it, the products were designed. The detailing was followed through and the final model executed.
This project was carried out in Elephant Design Private Limited, Pune. The client was Bajaj.
Striking a balance between aesthetics and budget, following the theme yet creating a distinct form for the project. The elements for the exhibition were designed.
Work ExperienceExhibition Design for auto expo
05
Skills
06
Sketching through Alias sketch-pro and Photoshop to generate ideas and present them.
The SUV was sketched as a part of a background poster. The display was a part of the exhibition for varroc at the Auto Expo 2008 held in Delhi. The look of the SUV needed to represent perfection and ruggedness in its design.
The skills developed in think3 were used in modeling and rendering products.
The trophy for pune design festival was designed and rendered to be presented as a theme which reflects simplicity and accuracy as the guideline for the design festival. The model shows the trophy made from glass, steel and granite.
07
08
Projects
09
Product Design, Modeling and Simulation of Isotonic Energy Drink Can
Incorporating the character-istics of energy in the form, the can was generated in 3D software model.
A prototype of the bottle was made in RPT. The logo and label were also designed.
ProjectsHomeless Multi-Utility Cart 3D-Design
10
Case study of the beggars of Guwahati followed by brainstorming for ideas for form with the attempt to create a form that follows function.
Homeless Multi-Utility Cart 3D-Design
11
Recumbent structure was preferred for final design of a cart which can be used to collect recyclables to provide an income, and serve as a shelter, for the homeless.
Projects
Recumbent Cycle ® http://www.jimdettwiler.com/bents.html
12
The major challenge in this project was the use of locally abundant natural resources (coconut branches) to build a tangible product to promote small scale industries.
The beauty of form was
redounded to come up with the product which is a wall
partition
Design of a Wall Partition for Craft Industry Projects
Projects 3D-Design and fabrication of Air-Propelled Shallow Water Boat
13
The spatial layout for the travel of eight travelers
considering various human factors
a scaled model of ratio 1:25 was made and details and intricacies figured out
The final design considering for propellers and incorporating
rescue boat features
Skills
14
From making scaled models to form explorations to Software modeling to visualization drawing, skills were tenaciously developed.
Dynamic Finite Element Analysis of Prosthetic Leg for Amputee Runners
15
Engineering
FE analysis for the carbon fiber blade of the flex foot for the various pressure points and stresses developing with the dynamic forces that act upon it
The load that develops on the lower blade of a transtibial
prosthetic with Cheetah Flex-Foot® as a basis is analyzed
through Finite Element Model
® Oscar Pistorius www.oscarpistorius.co.za
The load that develops on the lower blade of a transtibial
prosthetic with Cheetah Flex-Foot® as a basis is analyzed
through Finite Element Model
The load that develops on the lower blade of a transtibial
prosthetic with Cheetah Flex-Foot® as a basis is analyzed
through Finite Element Model
Graphic Design
16
Creation of an Animated Movie Clip
Designing of a Information brochure
An Animation Movie Clip of duration 2:13 was developed which was the humoures reenact-ment of a scene from the famous Hindi movie ‘Sholay’
The Information Brochure for the department was designed to represent the department during IIT counseling. Ease of reproduction and modes of distributing were accounted as well.
Three Line - IconsIcons
In the SpotlightManufacturing and production
Visual through the lens of the designer
Detailing
Workings within Learning/ LearntOn the field Striking the balancePreplanning and foresight
Yin-Yang: Design & Engineering
3D Computer modelling
Drafting and Project Management
Each icon emphasizes a prime aspect of that project that governed the design and thus represents my understandings from it
Icons were designed with a self-imposed constraint of using only 3 lines and 1 complex shading.
top related