stain glass
Post on 18-Jan-2016
45 Views
Preview:
DESCRIPTION
TRANSCRIPT
Stain GlassStain Glass
Faux stain glassFaux stain glass
ASSIGNMENT:ASSIGNMENT: Create an imitation (faux) stain glass Create an imitation (faux) stain glass
window.window.– Suggested images:Suggested images:
FlowerFlower Sun symbolSun symbol BirdBird FishFish AnimalAnimal objectobject
GRADING:GRADING: IMAGEIMAGE CRAFTSMANSHIPCRAFTSMANSHIP COLORCOLOR
Planning Steps:Planning Steps: Plan image on newsprintPlan image on newsprint On tracing paper, draw a frame around On tracing paper, draw a frame around
the edge of the paper.the edge of the paper. Draw your image large in the center.Draw your image large in the center. Draw connecting bridgeDraw connecting bridgess from the image from the image
to the frame.to the frame. Draw details - Draw details - remember to connect with remember to connect with
bridges.bridges. Use Xacto knife to cut out areasUse Xacto knife to cut out areas
CAUTION:CAUTION: CUT ON A PADDED SURFACE SUCH CUT ON A PADDED SURFACE SUCH
AS A MAGAZINE… AS A MAGAZINE… Not on the table!Not on the table! Hold the knife as you would a pencil.Hold the knife as you would a pencil. Don’t cut with the point, but use more Don’t cut with the point, but use more
of the “blade”.of the “blade”. Pull the knife in the direction you want Pull the knife in the direction you want
to cut - don’t push. to cut - don’t push. Turning the paper is easier than Turning the paper is easier than
turning the knife turning the knife
Construction Steps:Construction Steps: Fold black paper in half. Fold black paper in half. Use only the front cover for all work. Use only the front cover for all work.
Keep the inside Clean.Keep the inside Clean. Use tracing paper template to draw Use tracing paper template to draw
image onto front of black paperimage onto front of black paper Use Xacto knife to cut out areas. Hold Use Xacto knife to cut out areas. Hold
knife on a slant and cut through both knife on a slant and cut through both layers of black paper.layers of black paper.
CUT ON A PADDED SURFACE… Not CUT ON A PADDED SURFACE… Not on the table!on the table!
Tissue Paper “Faux Glass” Steps:Tissue Paper “Faux Glass” Steps: Trace a negative, cut out area onto Trace a negative, cut out area onto
tissue paper.tissue paper. Cut traced area from tissue paper Cut traced area from tissue paper
1/4 inch larger.1/4 inch larger. Apply glue to edge of area on black Apply glue to edge of area on black
paper.paper. Attach tissue paper.Attach tissue paper. One area of “faux glass” is One area of “faux glass” is
completed.completed.
Finishing Steps:Finishing Steps: Fill all negative areas with “glass”Fill all negative areas with “glass” Turn the folded black paper inside Turn the folded black paper inside
outout Apply glue to all black areas.Apply glue to all black areas. Tissue paper will be “sandwiched” Tissue paper will be “sandwiched”
between the two sheets of black between the two sheets of black paper.paper.
top related