stability q1(r2). role of stability safety and efficacy of drug product are established during...

Stability Q1(R2)

Role Of Stability

• Safety and efficacy of drug product are established duringdevelopment via clinical studies

• Quality is established for identify, strength, quality and purity

• If drug product stability changes beyond established acceptancecriteria, established safety and efficacy are no longer applicable.

• Change of Drug Stability would risk patient safety– Quality of finished products decrease– Potential sub-potent or over-dose products– Potential toxic unknown impurities

• Uncontrolled process → product investigation → product recalls• cGMP violations → consent decree → criminal prosecution

DRUG DEVELLOPMENTT PROCESS

Factors affecting Drug Stability

• Stability of the Active Pharmaceutical Ingredient (API) from storage

• Interaction between the API and excipient Formulation Development

• Selection of dosage form

• Manufacturing process of drug product

• Selection of container closure packaging system

• Effect of storage (temperature, humidity and light)

• Selection of marketing image

• Handling of the finished products

Purpose of Stability Testing

• The purpose of stability testing is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence of a variety of environmental factors such as temperature, humidity and light.

• Stability testing permits the establishment ofrecommended storage conditions, retest periods, andshelf-lives.

Drug Product Stability

• Stability characteristics of API or Drug Product is a critical

quality attribute of pharmaceutical product

• Stability Studies are used to:

– Establish how product changes over time under critical

environmental factors (temperature, heat and light)

– Determine appropriate product specifications

– Select marketing container closure system

– Determine appropriate storage conditions

– Justification of expiry of commercial product

– Provide necessary medical supplies

Stability Protocol

Stability program must be written and followed:– Used in determining appropriate storage conditions and expiration date.– Written program must include: Sample size and

test intervals, Storage conditions for samples,– Reliable, meaningful, and specific test methods,– Testing of drug product in marketed container,– Testing of drug product for reconstitution atdispensing time and reconstituted time.

Stability Protocol

An adequate number of batches must be tested todetermine an appropriate expiration date. A record ofsuch data must be maintained.

– Accelerated studies, combined with basic stabilityinformation on the components, drug products, andcontainer-closure system, may be used to supporttentative expiration dates.

– Full shelf-life studies, if not available, are beingconducted.

Stability Q1(R2)Stability Q1(R2)

• ICH condition contributing 80% of pharmaceutical market

• Outlines minimum stability data package for new drug application.It is not intended for INDs, ANDAs or sNDAs.

• Harmonizes stability requirement for marketing application in EU,Japan and US. Other countries adopt with some modifications.

• Must use Validated Stability-Indicating analytical methods

• Methods must cover physical, chemical, biological andmicrobiological attributes.

Stability Q1(R2)

• Studies evaluated under thermal and elevated humidity to cover storage, shipment and subsequent use

• Accelerated and intermediate used to evaluate impact of short-term excursions.

• Acceptance criteria should include individual and total upper limits for impurities and degradation products

• No formal statistical analysis is needed if data show little degradation or variability.

APISignificant change is defined as failure to meet the

specification.

Drug Product

- 5 percent potency change from the initial assay value;

-Any specified degradant exceeding its acceptance criteria

-Failure to meet acceptance criteria for appearance and physical properties (e.g., color, phase separation, resuspendibility, delivery per actuation, caking, hardness); and as appropriate to the product type;

-The pH exceeding its acceptance criteria; and Dissolution exceeding the acceptance criteria for 12 dosage units.

Photostability:

Two types of studies, exposure is cumulative from the light sources

• Forced degradation study to generate potential degradation products– 2 X exposure to UV and fluorescent sources

• Confirmatory study to confirm product and package performance– NLT 1.2 million lux hours + 200 watts/hrs per sq. meter

Light Sources:

– Option 1• Dual output light sources, such as D65/ID65• Simulates artificial day light fluorescent lamp• Use Xenon or Metal Halide– Option 2• Tandem exposure to single light source types• Cool white fluorescent lamp + near UV fluorescent lamp (320-400 nm)• Accumulate exposure under one, then the other

Bracketing:• Used for packaging extremes

• Assume that the intermediates are represented by the extremes

• For a range of strengths, strengths must be identical or very closely related in composition

• Can be applied to different container sizes or fills of same packaging system

• Bracketing design is NOT appropriate if extremes are not demonstrated.

Matrixing:

• Define full design and reduced design (with examples)

• Assume that the stability of each subset of samples tested represent

the stability of all samples at a given time point

• Define what is needed for justification

• Covering different batches, different strengths, different sizes of the

same container and closure, and, possibly, in some cases, different

container/closure systems….”

Design Program by Phase• Stability Program varies depending on the phase

andclinical study it supports• Stability Study Goals...– Identify problems early– Know your product– Minimize repeat study– Identify critical control attributes• i.e., Particle

size• Develop a stable commercial product• Maintain database--stability informatics• Establish systems to cycle back learning• Develop stability strategies to expedite product

development

Phase II & III• Stability profile of clinical materials must be monitored

• Test stations– 25 °C/60%RH– 30 °C/75%RH (if trial conducted in zone III and IV)– 40 °C/75%RH (Open Dish 1M)– 40 °C/75%RH– ICH Photostability

• What packaging will be required– Is your product moisture, light or heat sensitive– Desiccant needed/filler

Special storage conditions

• For liquids in semi-permeable package– Long term: 25 oC/40%RH (Zone I/II) Or 30 oC/35%RH (all zones)– Intermediate: 30 oC/65%RH– Accelerated: 40 oC/<25%RH and 40 ºC/75%RH

• To support adverse shipping and unusual storage of samples(liquid)– Freeze Thaw Cycling (-10 ºC to -20 ºC four days, 25 ºC or25 ºC/60%RH for three days)– Thermal Cycling (40 ºC four days, equilibrate to 25 ºC andthen 5 ºC for three days)

Analytical Methods

• Analytical methods must be validated for its

intended purpose.

• Analytical methods are needed for active ingredient, degradation products and other component of interest (211.166)

• Stability methods must be stability indicating

ICH Guidelines

Q1AR2…”The testing should cover, as appropriate, thephysical, chemical, biological and microbiologicalattributes, preservative content, and functionality tests(e.g for a dose delivery system). Analytical proceduresshould be fully validated and stability indicating.”

Q2A… “Validated analytical procedures should beused, irrespective of whether they are for in-process,release, acceptance, or stability testing”.

ICH Guidelines

• Q3B: “Analytical methods should be validated to demonstrate that impurities unique to the new drug substance do not interfere with or are separated from specified and unspecified degradation products in the drug product.”

ICH Guidelines

Q2A“Stress studies (e.g. products of acid and base hydrolysis,thermal degradation, photolysis, oxidation) for the drug substance andfor the active ingredient in the drug product should be provided todemonstrate the specificity of the assay and analytical procedures forimpurities. “

• Goals– Generate typical degradation products which may be expected onstability at sufficient levels to allow identification– Avoid secondary degradation– Target range is 5-20 % loss of active as judged by assay relative toan undegraded sample– Look for purity and mass balance

Storage Conditions

Global storage conditions :

Selection of batches :

Q1A R2 -- API Stress Testing

Stress testing is required– To understand the drug substance stability– To establish degradation pathways– To validate the stability indicating power of the analytical procedures

used.– To support the severe conditions that may be encountered during

distribution.

• Use single batch of material– at temperature above the accelerated temperature (50 ºC, 60 ºC)– humidity (e.g., 75 %RH or greater),– oxidation and photolysis on the drug substance across a wide range

of pH valueswhen in solution or suspension.– Photostability testing should be an integral part of stress testing (ICH

Q1B)

Q1A R2 -- API Stress Testing

• Study depend on the individual drug substance and type of drug product. Some degradation pathways can be complex and that, under forcing conditions,decomposition products may be observed that are unlikely to be formed under accelerated or long-term testing.

• Useful in developing and validating suitable analytical methods, but it may not always be necessary to examine specifically for all degradation products if it has been

demonstrated that in practice these are not formed.

• Results from these studies are part of regulatory submission.

Typical Forced Degradation DesignDrug Substance

– Solid State:• Heat: 60 ºC for up to 1 month• Photostability: twice ICH requirements

– Solution State: depending on solubility• Acid: 0.1-1N HCl to 2 weeks and to 60 ºC• Base: 0.1-1N NaOH to 2 weeks and to 60 ºC• Peroxide: 3% of H2O2 to 24 hours and to 40 ºC• Photostability: twice ICH requirements

Typical Forced Degradation DesignDrug Product

• Drug Product:– Heat: 60 ºC for up to 1 month– Photostability: twice ICH requirements– Using placebo as control

• For combination product (multiple active ingredients)– Stress should be done for API individually and also in the

presence of the other API (s).

Potential ImpuritiesImpurities for APIs and Excipients:• synthesis precursors• synthesis bi-products• residual solvents• catalysts• decomposition• and other impurities

Impurities for Drug Products:• degradations products• extractables• residual solvents• unknown substances

Conclusion• Stability is a critical quality attribute of the API and theDrug Product

• Stability profile needs to be established for drug productto assure safety, efficacy and quality.

• Understand key concepts to develop stability indicatingmethods.

• Understand the Regulatory Requirements versusScientific Knowledge.

• Understand regional versus global concerns to developstability program

• Design strategy for stability study based on data ofdevelopment batches

• Review cGMPs violations and regulatory observations

• Develop stability program and maximize efficiency

DEFINITION

STABILITY

“The capacity off a drug product/substance to remain withinspecifications established to ensure its system, identity,strength, purity & quality”

The purpose off stability testing is to provide evidence onhow the quality off a drug substance or product varies withtime under the influence off a variety off environment factor.

– Temperature, humidity, light and to set up retest periodfor the drug substance or a shelf-life for the drug productand recommended storage conditions.

ICH Drug Stability Test Drug Stability Test

Requirements

•Scientific in approach•Provide clear mandate to users•Call for good infrastructure and investment in stability testing

HOW TO GO ABOUT STABILITY STUDY

ICH

International Conference on

Harmonization of Technical

Requirements for Registration of Pharmaceuticals for Human use.

ICH - A TRIPARTITE AGREEMENT

17 countries in three regions

The world biggest pool for production andconsumption of pharmaceuticals

Legal status of guidelines

Most of the guidelines have become part of the local

regulations in US , Europe andJapan

THE ZONE CONCEPT

Distribution of world intoFour different zones

FOUR ZONES