sst ultilife and ultiflow nozzles - april 2011
Post on 18-Jan-2015
278 Views
Preview:
DESCRIPTION
TRANSCRIPT
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
Supersonic Spray Technologies
UltiLife™
and UltiFlow™
Modular NozzleAssemblies
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ Straight Nozzle Assembly
• Ideal for spraying hard or abrasive materials and for prolonged life
• Can be used with SST Cold Spray portable or robotic systems.
• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.
• A 31% savings in operating cost
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ Straight Nozzle Holder
• Manufactured with two orifice sizes 2.0mm & 2.5mm diameter. • The UltiLife holder is manufactured from high wear-resistant
material that extends holder life by up to a factor of 10, giving a 21% savings in operating cost
• Select this holder for applications that will be spraying hard metals, abrasive media, & blends
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ Nozzle 120 mm
• The UltiLife nozzle is manufactured from a high wear-resistant material that extends nozzle life by up to a factor of 80, giving a 34% savings in operating cost
• Standard nozzle lengths are 70 & 120 mm• Use UltiLife nozzles when spraying hard metals, abrasive media,
& blends
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ 90o Nozzle Assembly
• Can be used with SST Cold Spray portable or robotic systems.
• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ 90-Deg. Nozzle Holder
• Manufactured in two orifice sizes 2.0 & 2.5mm diameter.• The UltiLife holder is manufactured from high wear-
resistant material that extends holder life by a factor of up to 10
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ Nozzle 70 mm
• The UltiLife nozzle is manufactured from a high wear-resistant material that extends nozzle life by a factor of up to 80
• Standard nozzle lengths are 70 & 120 mm• Use UltiLife nozzles when spraying hard metals, abrasive
media, & blends
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™
Straight Nozzle Assembly
• Ideal for spraying pure materials• Reduces potential for clogging. • Can be used with SST Cold
Spray portable or robotic systems.
• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™ Straight Nozzle Holder
• Manufactured in two orifice sizes 2.0 & 2.5 mm diameter.• The UltiFlow holder is manufactured with a material that is
ideally suited to spraying pure Al, Zn, & Sn without clogging.• Up to 1.5 Hours continuous use
Maximum operating Temperature 350 Deg. C
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™ Nozzle 120 mm
• The UltiFlow nozzle is manufactured with a material that is ideally suited to spraying pure Al, Zn, & Sn without clogging
• Up to 1.5 Hours continuous use • Standard nozzle lengths are 70 & 120 mm
Maximum operating Temperature 350 Deg. C
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™ 90-Deg. Nozzle Assembly
• Ideal for spraying pure materials
• Reduces potential for clogging.
• Can be used with SST Cold Spray portable or robotic systems.
• Spring loaded collet enables nozzle replacement without the need for tools.
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™ 90-Deg. Nozzle Holder
Maximum operating Temperature 350 Deg. C
• Manufactured in two orifice sizes 2.0 & 2.5 mm diameter.• The UltiFlow holder is manufactured with a material that is
ideally suited to spraying pure Al, Zn, & Sn without clogging.• Up to 1.5 Hours continuous use
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiFlow™ Nozzle 70 mm
Maximum operating Temperature 350 Deg. C
• The UltiFlow nozzle is manufactured with a material that is ideally suited to spraying pure Al, Zn, & Sn without clogging
• Up to 1.5 Hours continuous use • Standard nozzle lengths are 70 & 120 mm
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
UltiLife™ and UltiFlow™
more choices for Practical Cold Spray Coatings
Custom sizes are available
CONTACT US TODAY TO DISCUSS YOUR NEEDS
SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.
Practical Cold Spray Coatings
CONTACT INFORMATION
Wally Birtch Dip. Mechanical Engineering (Aerospace) Technologist Cell: 248-218-1173Senior Application Development Engineer wally.birtch@cntrline.com
Ed Malison B.Sc., NACE Certified Coatings Inspector #12392 Cell: 519-835-6422 Director of Business Development ed.malison@cntrline.com
www.supersonicspray.com
CenterLine (Windsor) LimitedSupersonic Spray Technologies
655 Morton Drive, Windsor ON N9J 3T9Tel 519-734-8464
top related