sockets sockets sockets - limasoft · 2012. 8. 31. · sockets sockets 240 models used with sockets...
Post on 24-Aug-2020
14 Views
Preview:
TRANSCRIPT
Sockets Sockets
236
Sockets
Square SocketsItem P2RF
(Track-mounting)*see page 243
P2R *see page 246
P7TF(Track-mounting)
*see page 246
Screw terminal Solder terminal PCB terminal Screw terminal
5 pins P2RF-05Approx. 27 g
P2RF-05-EApprox. 38 g
P2R-05AApprox. 5 g
P2R-05PApprox. 5 g
P2R-057PApprox. 5.5 g
P7TF-05Approx. 28 g
8 pins P2RF-08Approx. 33 g
P2RF-08-EApprox. 38 g
P2R-08AApprox. 5 g
P2R-08PApprox. 5 g
P2R-087PApprox. 5.5 g
---
Note: -E Models are of finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
Square SocketsItem PYF
(Track-mounting)*see page
247
PY (back-connecting)
*see page 249
PTF (Track-
mounting)*see page
250
PT (back-connecting)
*see page 250
Screwterminal
Solderterminal
Wrappingterminal
PCBterminal
Screwterminal
Solderterminal
Wrappingterminal
PCBterminal
8 pins PYF08AApprox. 32 g
PYF08A-E
PYF08A-N
PY08Approx. 8 g
PY08-Y1
PY08-Y3
PYQ08QNApprox. 12 g
PYQ08QN-Y1PYQ08QN2-Y1
PYQ08QN2
PY08-02Approx. 7.2 g
PTF08AApprox. 39 g
PTF08A-E
PT08Approx. 11 g
PT08QNApprox. 10.4 g
PT08-0Approx. 8 g
Note: -E and -N Models are of finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
Sockets Sockets
237
Item PYF (Track-
mounting)*see page
247
PY (back-connecting)
*see page 249
PTF (Track-
mounting)*see page
250
PT (back-connecting)
*see page 250
Screwterminal
Solderterminal
Wrappingterminal
PCBterminal
Screwterminal
Solderterminal
Wrappingterminal
PCBterminal
11pins
PYF11AApprox. 46 g
PY11Approx. 9 g
PY11-Y1
PY11QNPY11QN2
PY11QN-Y1PY11QN2-Y1
PY11-02 PTF11AApprox. 50 g
PT11Approx. 13 g
PT11QN PT11-0Approx. 12.2 g
14pins
PYF14AApprox. 49 g
PYF14A-E
PYF14TApprox. 53 g
PYF14A-N
PY14Approx. 10 g
PY14-Y1
PY14-Y2
PY14QNPY14QN2Approx. 14 g
PY14QN-Y1PY14QN2-Y1PY14QN-Y2PY14QN2-Y2
PY14-02 PTF14AApprox. 60 g
PTF14A-E
PT14Approx. 17 g
PT14QNApprox. 20 g
PT14-0Approx. 16.2 g
Note: -E and -N Models are of finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
Item P7LF (Track-mounting)
*see page 253
Screw terminal
6 pins P7LF-06Approx. 60 g
Item P7S*see page 254
Screw terminal(Track-mount-
ing)
Solder terminal PCB terminal
14pins
P7S-14FApprox. 75 g
P7S-14AApprox. 10 g
P7S-14PApprox. 10 g
Sockets Sockets
238
Round SocketsItem PF
(Track-mounting)
*see page 255
P2CF (Track-
mounting)
PFA (Track-
mounting)
P3G (Track-
mounting)
PL (back-connecting) *see page 258
Solderterminal
Wrappingterminal
PCB terminal
8 pins PF083AApprox. 34 g
PF083A-E
PF085AApprox. 40 g
P2CF-08Approx. 55 g
8PFAApprox. 57 g
8PFA1Approx. 66 g
P3G-08Approx. 40 g
PL08Approx. 14 g
PL08-QApprox. 15 g
PLE08-0Approx. 10.6 g
11 pins PF113AApprox. 47 g
PF113A-E
P2CF-11Approx. 70 g
11PFAApprox. 74 g
P3GA-11(see note)Approx. 47 g
PL11Approx. 15 g
PL11-QApprox. 18.5 g
PLE11-0Approx. 10.8 g
14 pins --- --- 14PFAApprox. 104 g
--- PL15Approx. 28 g
--- ---
20 pins PF202Approx. 170 g
--- --- --- PL20Approx. 17 g
--- ---
Note: This model succeeds the P3G-11 for which production was stopped in March 1991.
Sockets Sockets
239
Hold-down ClipsFor Square SocketsPYC-A1 (see note)
5 max.
36.3
4.5
1.24.5
PYC-A2 (see note)
5 max.
42.8
4.51.24.5
PYC-P
29 max.
36.53.3
5
PYC-E1 (see note)
36.3
5.754.25
4.5±0.1
PYC-P2
10
28
PYC-S
282.5
8
PYC-1
9.4
28
5258.2
PYC-2
Approx. 328.8
8
PYC-3
5
29.5
44.5
PYC-5
10
3.7
41.7
PYC
10
3.7
34.5
For Round Sockets
6
60.862
4.6
4.5
PFC-A1 (see note)
6
73.3 74.5
4.6
4.5
PEC-A6 (see note)
6
9495.2
4.5
PFC-A7 (see note)
4.6
PLC (see note)
56.6
7.6PLC-1 (see note)
56.3
8
PLC-7 (see note)
69.265.7
9
8
PLC-8 (see note)
90.2 86.7
98
PLC-10 (see note)
66.2
5
6
PLC-12 (see note)
64.3
8
Note: There are 2 pieces per set.
Sockets Sockets
240
Models Used with SocketsGroup Model Pin No. Socket
Front-connecting Back-connecting
MY(K) MY2 8 PYF PY
MY3 11
MY4, MY2K 14
LY LY1, LY2 8 PTF PT
LY3 11
LY4 14
G2A(K) G2A, G2A-434, G2AK 14 PYF PY
MK(K) MK2P 8 PF083A(-E) PL
MK3P, MK2KP 11 PF113A(-E)
MM(K) MM2(X)P 8 8PFA
MM3P, MM2(X)KP 11 PFA
MM3XP, MM3(X)KP,MM4(X)P, MM4(X)KP
14
G4Q --- 8 8PFA1
G7L G7L-A-T(J) 6 P7LF ---
Models Used with Hold-down ClipsSquare Sockets
Item PYFA(-E, -N), PTFA(-E) PY(QN), PT(QN) PY-02, PT-0
MY( ), MY( )N, MY( )N-D2, MY( )N-CR, MY2K, LY( ), LY( )N,G3H, G3F, G3FD, G3FM
PYC-A1 PYC-P, PYC-S PYC-P
MY4IN PYC-P, PYC-P2 PYC-P, PYC-P2
MY2IN PYC-E1 PYC-P2 PYC-P2
LY( )-CR Y92H-3 PYC-1 PYC-1
G2A(K) Series PYC-A2 PYC-2, PYC-3, PYC-5 PYC-3, PYC-5
Note: Pin numbers 08, 11, or 14 apply to .
Round SocketsItem PF083A, PF113A PL08(-Q), PL11(-Q) PLE08-0, PLE11-0
MK2P Series, MK2KP,MK3P(-US), G3B
PFC-A1 PLC PLC-10
MK3ZP, MK3LP PLC-1
MYA-NA1, -NB1, MYA-LA1, -LB1, MYA-NA2, -NB2MYA-LA2, -LB2
PFC-A6 PLC-7 ---
MYA-LA12, -LB12 PFC-A7 PLC-8 ---
Note: 1. 8PFA(I), 11PFA, and 14PFA has hooks that can hold a Relay.
2. PL15, PL20, PF202, and Sockets that are not listed in the above table should be mounted to a panel after opening mounting holeson the panel.
3. A Hold-down Clip for PF085A is sold together with Relays that can be used with PF085A.
Sockets Sockets
241
Socket Performance CharacteristicsItem Carry current Dielectric strength Insulation resistance (see note 2)
P2RF-05(-E) 10 A Between contacts of same polarity: 1,000 VAC for 1 minBetween coil and contact: 4,000 VAC for1 min
1,000 MΩ min.
P2RF-08(-E) 5 A Between contact of different polarity:3,000 VAC for 1 minBetween contacts of same polarity: 1,000 VAC for 1 minBetween coil and contact: 4,000 VAC for1 min
1,000 MΩ min.
P2R-057P 10 A Between contacts of same polarity: 1,000 VAC for 1 minBetween coil and contact: 5,000 VAC for1 min
1,000 MΩ min.
P2R-087P 5 A Between contact of different polarity:3,000 VAC for 1 minBetween contacts of same polarity: 1,000 VAC for 1 minBetween coil and contact: 5,000 VAC for1 min
1,000 MΩ min.
P2R-05A 10 A Between contacts of same polarity: 1,000 VAC for 1 minBetween ground terminal and otherterminals: 1,500 VAC for 1 minBetween coil and contact: 4,000 VAC for1 min
1,000 MΩ min.
P2R-08A 5 A Between contact of different polarity:3,000 VAC for 1 minBetween contacts of same polarity: 1,000 VAC for 1 minBetween ground terminal and otherterminals: 1,500 VAC for 1 minBetween coil and contact: 4,000 VAC for1 min
1,000 MΩ min.
P7TF-05 5 A Between terminals: 2,000 VAC for 1 min 100 MΩ min.
PYF08A-E 7 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PYF08A-N 7 A (see note 3) Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PYF11A 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PYF14A-E 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PYF14A-N 5 A (see note 3) Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PY08(-Y1) 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY08QN(-Y1) 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY08-02 7 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY11(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY11QN(-Y1) 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY11-02 5 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY14(-Y1) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY14QN(-Y1) 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PY14-02 3 A Between terminals: 1,500 VAC for 1 min 100 MΩ min.
PTFA 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min.
PT 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min.
PTQN 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min.
PT-0 10 A Between terminals: 2,000 VAC for 1 min 100 MΩ min.
P7LF-06 30 A Between contact of different polarity:2,000 VAC for 1 minBetween contacts of same polarity: 2,000 VAC for 1 minBetween coil and contact: 4,000 VAC for1 min
1,000 MΩ min.
PFA 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
P2CF 5 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
Sockets Sockets
242
Item Insulation resistance (see note 2)Dielectric strengthCarry current
P3G(A) 6 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
8PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
11PFA(1) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PL(-Q) 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
PLE-0 10 A Between terminals: 2,000 VAC for 1 min 1,000 MΩ min.
P6D-04P 5 A Between contacts of same polarity:1,000 VAC for 1 minBetween coil and contact: 3,000 VAC for1 min
100 MΩ min.
P7S-14 6 A Between terminals: 2,500 VAC for 1 minBetween ground terminal and otherterminals (P7S-14A): 2,000 VAC for 1 min
100 MΩ min.
Note: 1. The values given above are initial values.
2. The values for insulation resistance were measured at 500 V at the same place as the dielectric strength.
3. The maximum operating ambient temperature for the PYF08A-N and PYF14A-N is 55°C. When using the PYF08A-N or PYF14A-Nat an operating ambient temperature exceeding 40°C, reduce the current to 60%.
Track and Accessories
4.5
15 25 2510
25
1000 (500) *
2510
15 (5)1
Mounting TrackPFP-100NPFP-50N
Note: The figure in the parentheses is for PFP-50N.
35±0.3
7.3±0.15
27±0.15
29.2
1.5
27 24
16
1
4.5
15 25 2510 25
10002510 15
35±0.3
Mounting TrackPFP-100N2
M4 x 8 pan head screw
M4 spring washer
50
11.5
10
10
6.2
1.8
1
35.5 35.3
1.8
1.3
4.8
End PlatePFP-M
516
12
44.3
16.5
34.8
SpacerPFP-S
Sockets Sockets
243
DimensionsNote: All units are in millimeters unless otherwise indicated.
P2RFDimensions Terminal
arrangement/Internalconnections (top view)
Mounting holes (top view)
P2RF-05 (One pole)Five, M3.5 x 8
71.5 max.
19.5 max.
54 max.
30 max.
4 dia.
4.2-dia. holes
M3 (M3 x 16)or 3.5-dia. hole
Note: Track-mounting is alsopossible.
9
P2RF-05-E (One pole)
M3.5 screw
85.5 max.
3.5-dia. holes
59 max.(80.9 max.)*
48 max.
61 max.
* When mounted on H3RN-1.
Note: Figures in pa-rentheses areDIN standardnumbers.
Note: Track-mounting is alsopossible.
M3 or 3.5-dia. holes
3.2-dia. holes
P2RF-08 (Two poles)
71.5 max.
19.5 max. 30 max.54 max.
4 dia.Eight, M3.5 x 8
Note: Track-mounting is alsopossible.
4.2-dia. holes
M3 (M3 x 16)or 3.5-dia. hole
9
Sockets Sockets
244
Dimensions Mounting holes (top view)Terminalarrangement/Internal
connections (top view)
P2RF-08-E (Two poles)M3 screw
3.5-dia.holes
85.5 max.
61 max.
63 max. (84.9 max.)*
48 max.
3 dia.
* When mounted on H3RN-2.
Note: Figures in paren-theses are DINstandard num-bers.
Note: Track-mounting is alsopossible.
M3 or 3.5-dia. holes
3.2-dia. holes
Note: When indicator modules with an I/O SSR are used, the No. 1 pin becomes positive.
Sockets Sockets
245
P2RDimensions Terminal
arrangement/Internalconnections (bottom
view)
Mounting holes (bottom view)
P2R-05P (One pole) 14.5 max.
35.5 max.
36.5 max.
Five, 1.6-dia. holes
P2R-08P (Two poles) 14.5 max.
35.5 max.
36.5 max.
Eight, 1.3-dia. holes
P2R-057P (One pole)14 max.
37 max.
41 max.
Five, 1.6-dia. holes
P2R-087P (Two poles)
37 max.
14 max.
41 max.
Eight, 1.3-dia. holes
Note: When indicator modules with an I/O SSR are used, the No. 1 pin becomes positive.
Sockets Sockets
246
P2R/P7TFDimensions Terminal
arrangement/Internalconnections
Mounting holes
P2R-05A (One pole)14.5 max.
35.5 max.
36.5 max.
Five, 3 x 1.8-dia. holes
(Bottom view)
P2R-08A (Two poles)
14.5 max.
35.5 max.
36.5 max.
Eight, 3 x 1.2-dia. holes
(Bottom view)
Use panel with thickness of 1.6 to 2.0 mm.
P7TF-0519 max.
71.5 max.
59 max.
Screw with square washer
(Top view)
(–) (+)
Two, 3.0 dia.
(Top view)
Note: Track-mounting is alsopossible.
Note: When indicator modules with an I/O SSR are used, the No. 1 pin becomes positive.
Sockets Sockets
247
PYF DimensionsDimensions Terminal
arrangement/Internalconnections (top view)
Mounting holes (top view)
Eight,M3 x 8sems screws
PYF08A Two, 4.2 x 5mounting holes 6
72 max.
23 max.
3.4
4
6
16.530 max.
35.4
Two, M3, M4, or 4.5-dia. holes
15±0.2
59±0.3
Note: Track-mounting is alsopossible.
Two, 4.2 x 5mounting holes 6 Eight, M3 x 8
sems
72 max.
23max.
3.4
35.4
4
616.5
31 max.
PYF08A-ETwo, M3 or M4(or 4.5-dia.) holes
59±0.3
15±0.1
Note: Track-mounting is alsopossible.
PYF08A-N
4
42
8
44
1
12
5
14
41
12
A2
14
11
9
A1
13
A2
14
22 max.
67 max.
PYF-08A-N
30 max.
73
4 1
8 5
12 9
14 14 13
42
44
12
14
41 11
A2 A2 A1
18.7
3.0 dia.
3.5 dia. or M3
Note: Track-mounting is alsopossible. Refer to page242 for MountingTracks.
PYF11A Two, 4.2 x 5mounting holes Eleven,
M3 x 8sems
72 max.
29.5 max.
30 max.
Two, M3 or M4(or 4.5-dia.) holes
Note: Track-mounting is alsopossible.
Sockets Sockets
248
Dimensions Mounting holes (top view)Terminalarrangement/Internal
connections (top view)
PYF14A Two, 4.2 x 5mounting holes Fourteen,
M3 x 8sems
72 max.
29.5 max.
30 max.
3 2 1
8 7 6 58
Two, M3 or M4(or 4.5-dia.) holes
PYF14A-ETwo, 4.2 x 5mounting holes Fourteen,
M3 x 8sems
29.5 max.
31 max.
72 max.
10 91112
4 13144
Note: Track-mounting is alsopossible.
PYF14A-N
30 max.
4
42
3
32
2
22
1
12
8
44
7
34
6
24
5
14
41
12
31
11
21
10
11
9
A1
13
A2
14
A2
14
67 max.
PYF-14A-N
29.5max.
73
4 3 2 1
8 7 6 5
12 11 10 9
14 14 13
42 32 22 12
44 34 24 14
41 31 21 11
A2 A2 A1
26
Two, 4.5 dia. or M4
Note: Track-mounting is alsopossible. Refer to page242 for MountingTracks.
PYF14T
Two, 4.2 x 5 dia.mounting holes
Fourteen,M3 x 8sems
33 max.
70 max.
3 2 1
8 7 6 5
10 91112
4 1314
Note: Track-mounting is alsopossible.
Two, M4
Sockets Sockets
249
PY DimensionsDimensions Terminal
arrangement/Internalconnections (bottom view)
Mounting holes
PY08PY08-Y1PY08-Y3
Eight, 3-dia. x 1.2 ellipses
*
2.7 7.742max. 20 max.
25.5max.
29.5max.
2.6
24max.
Note: PY08-Y1 includes the part outlined by the dashed lines above.
5
0 2PY08QNPY08QN2PY08QN-Y1PY08QN2-Y1 *
5
2.742max.
(20)25
41.5 max.(36.5 max.)
29.5 max.
22max.24max.
1
Note: 1. PY08QN(2)-Y1 includes the part outlined by the dashed linesabove.
2 The figures in the parentheses are for PY08QN2.
+0.2 0
13.2
5.8
+0.2 0
6.4
25.8
4.1
21.4
12.656.35
Ei ht 1 3 diPY08-02
0.3
2.7 4.3
16.5 max.
1.0
25.5max.
29.5max.
222max.
Note: PY08-Y1 includes the part outlined by the dashed lines above.
Eight, 1.3-dia.holes4.2
PY11PY11-Y1
Eleven, 3-dia. x 1.2 ellipses
Note: PY11-Y1 includes the part outlined by the dashed lines above.
25.5max.
29.5max.
24 max.20 max.42 max.
*
PY11QNPY11QN2PY11QN-Y1PY11QN2-Y1 *
42 max.41.5 max.(36.5 max.)**
29.5 max.
22max.24max.
Note: 1. PY11QN(2)-Y1 includes the part outlined by the dashed linesabove.
2 The figures in the parentheses are for PY11QN2 (-Y1).
**
PY11-02
16.5 max.
25.5max.
29.5max.
22max.
Eleven,1.3-dia.holes
Sockets Sockets
250
Dimensions Mounting holesTerminalarrangement/Internal
connections (bottom view)
PY14PY14-Y1 (=42 max.)PY14-Y3 (=60 max.) Fourteen, 3-dia. x 1.2 ellipses
Note: PY14-Y1 includes the part outlined by the dashed lines above.
25.5max.
29.5max.
24 max.20 max.
*
PY14QN, PY14QN2PY14QN-Y1 (=42 max.)PY14QN2-Y1 (=42 max.)PY14QN-Y2 (=49 max.)PY14QN2-Y2 (=49 max.)PY14QN-Y3 (=60 max.)PY14QN2-Y3 (=60 max.)
*
41.5 max.(36.5 max.)**
29.5 max.
22max.24max.
Note: 1. PY11QN(2)-Y1 includes the part outlined by the dashed linesabove.
2 The figures in the parentheses are for PY11QN2 (-Y1).
**
Fourteen,1.3-dia.h l
PY14-02
16.5 max.
25.5max.
29.5max.
22max.
1.3 dia.holes
Note: 1. Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it.
2. The PY14-Y1 and the PY14QN-Y1 can be used with MY4-series models and the MY2K.
PTF DimensionsDimensions Terminal
arrangement/Internalconnections
(top view)
Mounting holes (top view)
PTF08A Two, 4.5 x 6mounting holes Eight, 3.5M x 8
screw
78.5max.
28.5 max.
35.4
830max.
73.4 Two, M4 or
4.5-dia. holes
Note: Track-mounting is avail-able. See page 242.
68±0.3
27.5±0.2
Sockets Sockets
251
Dimensions Mounting holes (top view)Terminalarrangement/Internal
connections (top view)
Two, 4.5 x 6mounting holes 7
Eight, M3.5 x 8sems
78.5 max.
28.5max.
3.4
35.4
8
32.65 max.
PTF08A-ETwo, M4 ortwo, 4.5-dia. holes
68±0.3
19±0.2
Note: Track-mounting is avail-able. See page 242.
PTF11A Two, 4.5 x 6mounting holes Eleven,
3.5M x 8screw
78.5max.
37 max.30max.
Two, M4 or4.5-dia. holes
Note: Track-mounting is avail-able. See page 242.
PTF14ATwo, 4.5 x 6mounting holes Fourteen,
3.5M x 8screw
78.5max.
45.5 max. 30max.
Two, M4 or4.5-dia. holes
PTF14A-E Two, 4.5 x 6mounting holes Fourteen,
3.5M x 8screw
78.5max.
45.5 max.33max.
Note: Track-mounting is avail-able. See page 242.
Note: If PTF08A and PT08 are used in combination with LY1 with a total current flow of 10 A minimum, terminals 1 and 2, 3 and 4, 5 and 6respectively should be short-circuited.
Sockets Sockets
252
PT DimensionsDimensions Terminal
arrangement/Internalconnections (bottom view)
Mounting holes
2.7
25.5max.
29.5max.
PT08
5
0.3
Eight, 1.7-dia. x 3.5ellipses
PT08QN1.5 x 10
2.7
920 1.5
24max.
1.025.5max.
29.5max.
2.535 max.
20.5 max.
2
+0.2 0
+0.2 0
25.8
21.4
PT08-02
0.3
2 5*
1 4.3
18 max.22 max.
6.5
29.5 max.
*Keep a proper distance between theSocket and PCB patterns.
10
5.35
6.5
15.6
4.6
12.456.45
3 Eight, 2.5-dia.holes
The tolerance is ±0.1.
PT11 PT11QN
32max.
29.5 max.
Eleven, 1.7-dia. x 3.5 holes
35 max.
20.5 max.
32 max.
29.5 max.
1.5 x 10
PT11-0
18 max. 29.5 max.
32 max.
*Keep a proper distance between theSocket and PCB patterns.
5*
Eleven,2.5-dia. holes
The tolerance is ±0.1.
Sockets Sockets
253
Dimensions Mounting holesTerminalarrangement/Internal
connections (bottom view)
PT14QNPT14
42.5max.
Fourteen, 1.7-dia. x 3.5 holes
35 max.
20.5 max.
1.5 x 1.0
26.5max.29.5max.
42.5 max.
26.5max.29.5max.
PT14-0
17.5 max.
42.5 max.
*Keep a proper distance between theSocket and PCB patterns.
26.5 max.
29.5 max.
5*
Fourteen,2.5-dia. holes
The tolerance is ±0.1.
Note: Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it.
P7LF DimensionsDimensions Terminal
arrangement/Internalconnections (top view)
Mounting holes
P7LF-06Two, M3.5 (coil side)
Four, M4(contact side)
46 max.55.5 max.
51.5 max.
0 1
2 4 6 8
Two, M4 or4.5-dia. holes
Sockets Sockets
254
P7S DimensionsDimensions Terminal
arrangement/Internalconnections
Mounting holes
P7S-14F
40 max.
Fourteen, M3.0
40 max.90.5 max.
47 max.
(top view)
Two, M3.5 or4.0-dia. holes
P7S-14A61.5 max.
33 max.
23max.
G7S-4A2B
G7S-3A3B
(bottom view)
P7S-14P61.5 max.
29 max.
23 max.
Two, 6.5 dia. × 7.9
23 max.
G7S-4A2B
G7S-3A3B
(bottom view)
Two, 3.6 dia.
Fourteen, 1.8 dia.
Sockets Sockets
255
PF DimensionsDimensions Terminal
arrangement/Internalconnections (top view)
Mounting holes
PF083A Eight, M3.5 x 7sems screws
52 max.
4 3341 max.
7
Two 4.2-dia.holes
4
35.4
2
21 max.
3.5
Note: Track-mounting is avail-able. See page 242.
Two, M4 or 4.5-dia. holes
33±0.2
PF083A-EEight, M3.5 x 7sems
7
Two, 4.2-dia.holes
4
52 max.
2333
41 max.
4
35.4
3.5 2
21 max.
Two, M4 or two, 4.5-dia. holes
33±0.2
PF085A Eight, M3.5 x 7sems screws
58 max.
4
7
Two4.5-dia.holes
33±0.2
40 max.
4
35.4
23.5
21.6 max.
1.1
Note: Track-mounting is avail-able. See page 242.
Two, M4 or 4.5-dia. holes
33±0.2
PF113AEight, M3.5 x 7sems screws
52 max.
41 max.
Two4.2-dia.holes
21 max.
Two, M4 or 4.5-dia. holes
PF113A-E
Eight, M3.5 x 7 semsTwo,4.2-dia.holes
52 max.
41 max.
21 max.
Note: Track-mounting is avail-able. See page 242.
Sockets Sockets
256
Dimensions Mounting holesTerminalarrangement/Internal
connections (top view)
PF202
101 max.
Two, 4.5-dia. holes 71 max.Two, M3 Relay mounting screws 33 max.
Two, M4 or 4.5-dia. holes
Note: The key groove of PF083A and PF113A (used with MK Relays) are on the upside.
P2CF/PFA DimensionsDimensions Terminal
arrangement/Internalconnections (top view)
Mounting holes
P2CF-08 Eight, M3.5 x 7.5sems screws
70 max.
50 max.
Two, 4.5-dia.holes
31.2 max.
Note: Track-mounting is avail-able. See page 242.
Two, M4 or 4.5-dia. holes
P2CF-11 Eleven, M3.5 x 7.5sems screws
70 max.
50 max.
Two, 4.5-dia.holes
31.2 max.
Two, 4.5-dia. mounting holes
Note: Track-mounting is avail-able. See page 242.
Sockets Sockets
257
Dimensions Mounting holesTerminalarrangement/Internal
connections (top view)
8PFAEight, M3.5 x 7sems screws
81 max.
51 max.
Two, 4.5-dia.holes
24 max.
118 max.
Two, 4.5-dia. mounting holes
8PFA1Eight, M3.5 x 7sems screws
93 max.
51 max.
Two, 4.5-dia.holes
24 max.
130 max.
Note: Track-mounting is avail-able. See page 242.
PFA/P3G/P3GA DimensionsDimensions Terminal
arrangement/Internalconnections
(top view)
Mounting holes
11PFA Eleven, M3.5 x 7sems screws
81 max.
Two, 4.5-dia.holes
51 max.
33.5 max.
118 max.
Note: Track-mounting is avail-able. See page 242.
Two, M4 or 4.5-dia. holes
14PFA Fourteen, M3.5 x 7sems screws
81 max.
Two, 4.5-dia.holes
72 max.
33.5 max.
118 max.
Note: Track-mounting is avail-able. See page 242.
Two, M4 or 4.5-dia. holes
Sockets Sockets
258
Dimensions Mounting holesTerminalarrangement/Internal
connections (top view)
P3G-08 27 dia. ---
P3GA-11 27 dia. ---
PL DimensionsDimensions Terminal
arrangement/Internal
connections(bottom view)
Mounting holes
PL083.5
51 max. 40
35max.
4 1
30 dia.
16
35max.
0.6t x 1.3
74 or 8640±0.3
Two, 3.5-dia. or two, M3Relay-mounting holes
Two, 3.5-dia. or two,M3 Socket-mountingholes
31-dia. hole
PL08-Q
50.5 max. 40
3.5
35max.
4 1
30 dia.
Two,2-dia.holes
Approx. 20.5
3.972
Two, 3.5-dia. or two, M3Relay-mounting holes
Two, 3.5-dia. or two,M3 Socket-mountingholes
31-dia. hole 40±0.3
19
PLE08-0
29 dia.±0.3
14 50.3t
21.5 max.
Two, 3.5-dia. Hold-downClip-mounting holes
40±0.3
27.7±0.5
Eight, 2.5-dia. holes
Note: When mounting, pay due attention to the direction of the key groove of applicable Relays.
Sockets Sockets
259
PL DimensionsDimensions Terminal
arrangement/Internalconnections (bottom view)
Mounting holes
PL11
51 max.
35 max. Approx. 20.5 max.
Two, 2-dia.holes
30 dia.Two, 3.5-dia. or two, M3-mountingholes for applicable models
Two, 3.5-dia. or two, M3Socket-mounting holes
L=40 mmMK3P MK2KP
PL11-Q
51 max.
35 max.35 max.
31-dia. hole
MK3P, MK2KP,MK3ZP, MK3LPL=74 mmMM3P, MM2(X)KP
PLE11-0
29±0.1 dia.
22 max.
Eleven,2.5-dia. holes
Two, 3.5-dia. Hold-downClip-mounting holes
L= Distance between mountingholes required for MK
Eleven, 2.5-dia. holes
MK3PMK2KP
PL15
66 max.
45 max.
22 max.
Two, 2-dia.holes
41 max.
Two, 3.5-dia. or two, M3-mountingholes for applicable models
Two, 3.5-dia. or two, M3Socket-mounting holes
42-dia.hole
MK3XP,MM4(X)P,MM3(X)KP,MM4(X)KP
PL20
46.5 max.
36.5 max. 23 max.
Two, 2-dia.holes
Two, 3.5-dia. holes
31 max.
Two, 4.5-dia. Relay-mounting holes
Two,Socket-mountingholes
33-dia.hole Note: Mounting hole
preparationnot required forLDNP.
top related