smart act 1 english
Post on 15-Jul-2015
80 Views
Preview:
TRANSCRIPT
SmartAct-1 Electric ActuatorTHE WORLD’S FIRST RIFT DRIVEN®
ELECTRIC ACTUATORFor Part Turn & Multi-Turn Applications
PAY ATTENTION !!!
All of the following functionalities are in one actuator, which can be activated on demand !!
1 model
For all applications up to 100 Nm
Torque range 40, 60, 80, 100Nm
Manual operation
Position indication
ISO5211 / EN15714-2 compliantAngle or Multi-Turn Function
Universal power supply 12-300V
Over-torque protection
Anti-condensation heaterSpeed control
Solenoid Function
Data logging
Failsafe
Modulating
Fieldbus communications Of-Grid and Timer Facility
Hugely energy efficiënt Weatherproof Light weight
Universal power supply 12-300V
• AC(50/60Hz)\DC: 12 – 30 Volts
• AC(50/60Hz)\1ph: 24 & 85 – 300 Volts
Max. current DC: 200mA @ 24V
Max. current AC: 50mA @ 85V
Your complete system may be smaller due to the low current and therefore cheaper build !!
ISO 5211 flange connectionSO5211 / EN15714-2
Flange Size: F03, F04 & F05 Flange Size: F07 & F10Adapters:• Output drive square 11 mm• Output drive square 14 mm• Output drive double D• Output drive octagonal
Adapters:• Output drive square 17 mm• Output drive square 22 mm• Output drive double D• Output drive octagonal
Output drive orientation 0° or 45°
Torque range 40, 60, 80, 100Nm
The torque is adjustable by the distributor.
The standard 40 Nm electric drive is via Bluetooth and a code bought by the distributor upgradable to 60 Nm, 80 Nm or 100 Nm.
The upgrade is currently done using a Windows program which for example runs on a laptop or tablet. An android app is under development.
60 Nm80 Nm
40 Nm
100 Nm
STOCK
FailsafeSafe position on power failure
The following options are configurable:Normally closed (NC)Normally Open (NO)Stay Put% Open
Lifetime: 5 years
Solenoid FunctionThis function allows you to control SmartAct-1 if it is a solenoid valve:
Power connected valve openPower off, valve closedorLatchingorPower connected valve closePower off, valve open
VoedingVoeding
Additional features to work more as solenoid valve:Fail Safe: at power failure Normally Closed (NC) or Normally Open (NO)Speed control: approx 0.9 seconds at 40 Nm and about 2 seconds to 100 Nm
Solenoid FunctionConnections: equal
SmartAct with ball valve
Switching speed: approx 0.9 sec @ 40NmFailsafe: NC, NO (1 version)No differential pressure requiredUseable with dirty mediaStandard position indicatorStandard position feedbackCheaper at larger sizesDimensions: relatively largeOrifice: full boreManual operation: standard
VoedingSolenoid
Switching Speed: HighFailsafe: NC, NO (2 versions)Differential pressure requiredNot to be used in dirty mediaNo position indicatorNo position feedbackPricey at larger sizesDimensions: compactOrifice: reducedManual operation: Optional
Universele voedingsspanningSpeed control 90°:Max. appr. 0.9 seconds at 40 NmMin. dribble, no max. time
The specified speed is independent of the load and controlled by an internal PI controller. Therefore the same with and without load.
Speed !!!!!
Position indication
Open
Red LED when closing and in the closed position
LED green when opening and in the open position
Closed
Over-torque protectionFor some applications or valves, you can limit the maximum torque to ensure that nothing will be damaged.
Default setting is about 10% above the maximum torque purchased.
Over-torque
Random installationNo oil lubrication
The SmartAct contains no oil, because the gears are made of self-lubricating plastic.
The more the actuator is used, the smoother it will run and the less noise it makes.
Because there is no oil in the drive, you can also apply it upside down.
There is a 2 year warranty on the SmartAct
Hugely energy efficiëntThe RIFT DRIVEN® motor system saves about 75% by weight and energy.
Compared to other electric actuators the SmarAct saves on average around 90%
Max. current DC: 200mA @ 24V
Max. current AC: 50mA @ 85V
100% Duty cycle!!
Power supply with solar cells possible !!
Modulating
Input signals for setpoint position: 0-10v DC, 0-20mA or 4-20mAOutput signals for Position feedback: 0-10v DC, 0-20mA or 4-20mA
The 10-bit contactless position sensor of the actuator adjusts itself using the internal PI controller to the desired position with an accuracy of ¼ °.
Unnecessary frequent movement instigated by a constantly fluctuating input signal is dampened by averaging formulae within the EPS programme to prevent the motors running continuously.
This function is also compatible with the Failsafe feature.
DataloggingCurrently only available for the distributor:• Number of cycles
Available for the valve manufacturer:• Max. temperature• Max. torque• Torque profile over 90° of the valve (very interesting for the valve manufacturers)
user:• App for i.a. data logging is under development
Manual operationManual control by means of the three buttons on the SmartAct.• On request a closed lid without manual• On request the manual control can be locked, so that it cannot be used
Red: Stationary = closed
Green: Rotary = opening
Green: Stationary = open
Red: Rotary = closing
top related