service training 2 simatic tia portal - grollmus

SERVICE TRAINING 2 SIMATIC TIA PORTALError diagnosis, WinCC, GRAPH, SCL, frequency converter, PROFINET IO

DURATION5 Days

CONTENTWorking with the digital twin (SIMIT)

Commissioning of a program for a production cell

Embedding of FCs and FBs

Use of organization blocks for error diagnosis

Software troubleshooting and correcting of errors

Analog modules and analog value processing

Commissioning of PROFINET IO and distributed I/O

Error diagnosis for PROFINET IO

Parameterization of an inverter (Drive) and commissioning on PROFINET

Drive diagnosis

Commissioning of a WinCC project

Changes to WinCC project

Adding Sequence control with GRAPH to your program

Putting the SCL program into operation

Ethernet communication

Basics on Functional Safety

DESCRIPTIONBuilding on the service basics from Service Course 1, the focus of this course is on system functions andtroubleshooting in systems with frequency inverters (SINAMICS), HMI devices (OP), and PROFINET. You willlearn how to parameterize a drive and an operator device as well as how to commission PROFINET IOperipherals. The theoretical knowledge will be further deepened by practical exercises on the model. Thisallows you to put your theoretical knowledge immediately into practice. After completion of the training,you will be able to diagnose errors and fix them. As this reduces system downtimes, you increaseproductivity. You can adapt your system to new conditions by small program changes or extensions. This isthe last of three training courses in this specialization which certifies you as an Automation Engineer ServiceTIA Portal according to ZVEI Regulations.

ONLINE VORBEREITUNGMit unserem praxisnahen Online-Training bereiten Sie sich optimal auf den Online-Vorbereitung Servicekurs2 TIA Portal vor. Hier erhalten Sie weitere Informationen.

TARGET GROUPService personnel, maintenance engineers, commissioning engineers, project planners

REQUIREMENTS

Knowledge of Service Training 1 SIMATIC TIA Portal and SIMATIC S7.

SOFTWARE / DEVICESTIA Portal, STEP 7, WinCC, GRAPH, SCL, S7-1500, ET 200, HMI-Panel, SINAMICS, plant model

OUR RECOMMENDATIONPlease also take the examination in order to become Automation Technician Service TIA Portal according toZVEI. We moreover offer additional advanced modules focusing on engineering, operator control andmonitoring, communication and drive technology.

Events

YOUR PERSONAL CONTACT PERSONHochheim am Main München

At our headquarters in Hochheim weadvise you for our locations Berlin,Braunschweig, Düsseldorf, Hamburg,Hochheim am Main and Mannheim.

At our headquarters in Munich we adviseyou for our locations Dresden, Freiburg,Graz, Innsbruck, Leipzig, Linz, München,Nürnberg, Stuttgart, Zürich und Wien.

Monika JattaHead of training organization+49 6146 828280kontakt@grollmus.dewww.grollmus.de

Kristina HockeHead of training organization+49 89 23238870kontakt-muenchen@grollmus.dewww.grollmus.de

Powered by TCPDF (www.tcpdf.org)