section 4: air receivers

Airsweep Installation & Maintenance Manual

Airsweep Models VA-06 • VA-12 • VA-51

SECTION FOUR

AIR RECEIVERS 30, 60, 80 Gallon ASME Air Receivers

Tank Options - Auto Drain, Check Valve, Particulate Filter

Pressure Relief Valve - Model SRV250

Ball Valves - 3/4", 1", 1.5", 2"

Regulators - R50R-08, R50R-12, 09R813/B

30 GALLON ASME VERTICAL AIR RECEIVER – J32202

DIMENSIONS

FIND NUMBER NPT SIZE F1 1/2” F2 1-1/2” F3 3/4" F4 1/4"

SPECIFICATIONS

Gallons 30 Cubic Feet 4.0 Weight 85 lbs. Length 38” MAWP 200 PSI @ 650˚F I.D. 16”

Code: ASME SEC. VIII DIV. 1.

Latest Edition & Addenda

60 GALLON ASME VERTICAL AIR RECEIVER – J32203

DIMENSIONS

FIND NUMBER NPT SIZE F1 1/2” F2 2” F3 3/4" F4 1/4"

SPECIFICATIONS

Gallons 60 Cubic Feet 8.0 Weight 196 lbs. Length 48” MAWP 200 PSI @ 400˚F I.D. 20”

Code: ASME SEC. VIII DIV. 1.

Latest Edition & Addenda

80 GALLON ASME VERTICAL AIR RECEIVER – J32204

DIMENSIONS

FIND NUMBER NPT SIZE F1 1/2” F2 2” F3 1-1/4" F4 1-1/4" F5 1/4"

SPECIFICATIONS

Gallons 80 Cubic Feet 10.7.0 Weight 220 lbs. Length 46” MAWP 200 PSI @ 650˚F I.D. 24”

Code: ASME SEC. VIII DIV. 1.

Latest Edition & Addenda

AIR RECEIVER TANK KIT COMPONENTS

T53 SERIES AUTOMATIC DRAIN

T53 SERIES DRAIN TRAP ARROW PNEUMATICS

Models 61105 (1”) & 61108 (2”)

With reinforced ball-cone check and stainless steel springs, these valves offer exceptional resistance to chemicals and corrosion. Bronze construction is standard; stainless steel construction also available.

Temperature & Pressure Ratings °F PSIG

-20 to100 400 200 200 250 160 275 150 300 140 325 130 353 125

Pressure Relief Valve

Model: SRV250

Set Pressure Range: 25-450 psig

Set Pressure Tolerance: ±2 psig up to and including 70 psig, ±3% of set pressure greater than 70 psig. As required in paragraph UG-134(d)(1) of the ASME Boiler & Pressure Vessel Code Sec. VIII Div. 1.

Seat Leakage: Bubble Tight within 5 psig for set pressure 50 psig or less Bubble Tight within 10% for set pressure greater than 50 psig As required in paragraph 2.2.3 of API 527. 2.5 AQL sample testing or 100% testing.

Flow Factor (Slope Method): 0.74

Operating Temperature Range: -65°F to 400°F

Materials of Construction: Seat, Cap, Piston: ASTM B16 Brass / ASTM A582 Stainless Spring: 17-7 Stainless Steel Seal: Silicone / Viton

Valve Weight: 0.10 lbm

Valve Options: Valve Material: ASTM B16 Brass / ASTM A582 Stainless Seal: Silicone or Viton High Pressure Setting 351-450 psi (Valve Weight 0.11 lbm) Shrouded Adjustment Cap (Valve Weight: 0.17 lbm) Plating: Nickel Plating Inlet NPT Sizes: 1/8 NPT or BSPT

1/4 NPT or BSPT or BSPP (Class A) 3/8 NPT or BSPT

Certifications: ASME Boiler & Pressure Vessel Code Section VIII Division 1 CSA B51-03 Boiler, Pressure, Vessel, and Pressure Piping Code

BALL VALVE – MODEL LHBV – 75

• Pipe Size: 3/4" • End-To-End Length: 2-1/2” • Max Pressure: 1/4"- 2” 600psi @ 100˚F (Water, Oil, Inert Gas) • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes

- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.

BALL VALVE – MODEL LHBV – 100

• Pipe Size: 1" • End-To-End Length: 3-3/16” • Max Pressure: 1/4"- 2” 600psi @ 100˚F (Water, Oil, Inert Gas)

2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes

- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.

BALL VALVE – MODEL LHBV – 150

• Pipe Size: 1-1/2" • End-To-End Length: 4” • Max Pressure: 1/4"- 2” 600psi @ 100˚F (Water, Oil, Inert Gas)

2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes

- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.

BALL VALVE – MODEL LHBV – 200

• Pipe Size: 2" • End-To-End Length: 4-3/4” • Max Pressure: 1/4"- 2” 600psi @ 100˚F (Water, Oil, Inert Gas)

2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes

- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.

HIGH FLOW REGULATOR – NUMATICS R50 SERIES (R50R-08 / R50R-12)

• Diaphragm-operated regulator • T-handle standard • Standard output pressure 0-125 PSIG

FLOW RATINGS

Model Pipe Size SCFM* @ Reduced Pressure of

25 PSIG 60 PSIG 80 PSIG

R50R-08 1" 370 385 395

R50R-12 1-1/2" 370 385 395 *Flow rates based on 100 PSIG inlet and 25% PSID

SPECIFICATIONS

Temperature Range ˚F (˚C) 40-120 (4-46/9)

Max. Pressure PSIG (Bar) 300 (20.7)

1 & 1-1/2 Weight, lbs. (kg) 7.2 (3.3)

DIMENSIONS: Inches (mm)

SIZE A B C D

1" 8.81 (224.0)

4.56 (116.0)

1.94 (24.0)

7.88 (200.0)

1-1/2"

9.53 (242.0)

5.19 (132.0)

1.28 (33.0)

8.25 (210.0)

Thank you for your interest in our Airsweep Systems® line of products.

Please do not hesitate to contact us regarding any questions you may have, or if you would like to request a free design consultation and estimate.

Myrlen Airsweep Systems Division of Control Concepts, Inc

Toll Free (800) 662-4762 • Fax (888) 737-0297 www.AirsweepSystems.com • Info@AirsweepSystems.com

Control Concepts Inc. Helps Reduce Risk by Keeping Materials Flowing Safely and Economically Through Your Plant

If you would like to learn about our line of Zero Speed Switches and AcoustiClean™ Sonic Horns, please contact us at:

Control Concepts, Inc 100 Park Street • Putnam, CT 06260

Toll Free (800) 745-6551 • Fax (860) 928-9450 www.ControlConceptsUSA.com • Sales@ControlConceptsUSA.com