seal it green, wood protection to the core

Wood protection to the core

Wet On Wet

• A coating that can go on after a rainstorm on a warm day

What Makes

Our Sealants unique?

• True non film-forming approach to wood protection.

• Proprietary wood diffusion system.

• Unmatched dimensional stability.

• Safe broad spectrum preservation.

• Proven cost and time savings.

• Looking at what is central to the unique points of

difference that Seal It Green has in the market.

Film forming approach for

exterior wood protection.

Image of an advertised high end natural oil

polymer. bamboo protection oil.

Another Top Brand Coating on Bamboo this

one is like furtilizer for mold

3 x coats of high end PU coating. It clearly shows

film failure due to substrate movement, expansion,

contraction. Water stains can be seen under the

coating which are not possible to restore without

sanding or stripping the film off.

Spanish Cedria.

This deck is poolside and the film failed in a short

time from install. Once failed, the weathering and

degradation is rapid on a substrate like bamboo

Cedar Deck with Penofin

Solid color must be

stripped…

How Seal It Green And

Xtreme differs.

Unique penetrating oil

system engineered to

never peel or flake.

Redwood 4x4 3 weeks

The full weather effect with exposure. This is Red Iron

Bark clear coated with Xtreme. Note how it silvers with

weathering. To maintain colour, an Xtreme UV colour

tone is needed to match the wood species.

Simple cleaning and re-application of 1 x coat of Xrteme

is all that is required to provide a rich and protected feel.

The number one performance point of

difference with the Seal IT Green and

Xtreme range is the unmatched ability to

stabilize all wood to minimize the effects

of cupping, warping, twisting, splitting and

checking.

Slide showing the cut end section from the same sample. Top picture is raw,

bottom picture is Xteme coated. This shows the ability of Xtreme to better control

moisture and thereby stabilize the wood to minimize the effects of cupping,

twisting, warping, splitting and end checking.

Xtreme applied to a piece of thermal wood sliced in half , the piece with no coating has expanded in length width and thickness not to

mention the cracking

and fading.

Picture showing free diffusion of

Xtreme into a LOSP treated H3

70 x 45mm section. Many long

term test show that Xtreme

continues to be mobile within the

timber or many months after the

first application. Xtreme can work

it’s way over time even into the

most dense timbers such as IPE

and Exotic hardwoods such as

Tiger Wood. Xtreme will diffuse

through cedar siding 100% from

1 x application.

Redwood freshly coated cut in half

You can see how the fibers are turned from the blade hiding the Xtreme

3 minutes later the cut

3 weeks later

Redwood piece after 3

months just the center has

not filled yet

Wood can be wet stacked from mill or factory with

clear Xtreme clear. Wood can go from milling

straight through spray lines to be packed and

strapped. This unique ability from Xtrem enables

the mill or factory to value add to their product line

as the process is fast and economical and also

highly profitable for the smart, forward thinking

company who takes advantage of this technology.

Introducing…

Application of Xtreme showing

coating band with diffusion

heading out both ways taking

preservation components along

with quality resin system.

Even more susceptible to staining fungi is bamboo. Xtreme is designed to better meet the needs of

bamboo and low durable timbers. Xtreme has performed well even in harsh conditions

Xtreme has proven to resist the most persistent black staining fungi that attacks bamboo world wide.

This bamboo sample has the Xtreme coated over already colonised black fungi and has stopped the

growth in it’s tracks. Staining fungi at this stage of the bamboo weathering can be easily cleaned

with our Quick Clean but progressed weathering on bamboo without Xtreme develops deep staining

on bamboo that can be almost impossible to remove even with heavy drum sanding.

Xtreme diffusion into untreated Radiata Pine. With 1 x coat of clear, you can see a distinct coating line.

From this point, you can see the ability of Xtreme to continue to diffuse into new wood. The Xtreme oil

system also takes our safe and proven preservation system deep and far into the wood which links to

the cell structure to provide high efficacy against a large number or mould/fungi species.

This picture shows stopping Blue Stain fungi in it’s tracks. Blue stain fungi is responsible for lowering

the value of huge amounts of timber world wide to to the deep blue to black staining that can become

permanent in soft woods.

particle board

Extreme-no coat-Green

Proven track record for

time and cost savings

Long term history of industrial mill and

factory coating to value add to company

product lines.

Seal It Green Or Xtreme is used due to the

performance and profit that can be gained

for this value add.

From tree carvings to exotics and bamboo

Penetrates and repairs

Plastic & Composite

Before

Trex

Timbertech