sca kit case(neobiotech)
Post on 16-Jul-2015
209 Views
Preview:
TRANSCRIPT
SCA Kit Clinical Case
Safe, Simple, Speedy Sinus crestal approach
No.1 Sales Sinus Approach Kit
Originality since 2007
Diagnosis • #25 & #26: extraction required after failed endodontic therapies • #27: implant placed with sinus graft
Treatment planning • Implant site: Immediate placement on teeth 25 and 26 • Surgery date: March 28, 2014 • Time for total treatment: 3 months
Available at www.neobiotechus.com
Both extraction sockets 25 and 26 were carefully debrided with copious saline solution after extractions. Clinical view of socket 26 clearly shows interraicular bony septa.
Available at www.neobiotechus.com
The center of the interradicular septum of bone was prepared with S-reamer to enable an implant to be placed in the middle of the socket without the membrane tearing.
Available at www.neobiotechus.com
The remaining bone height was 3mm. Starting from 2mm stopper, the site was drilled 1mm by 1mm until the sinus cavity opened without the membrane tearing.
Available at www.neobiotechus.com
Occlusal view of the drilling site. Sinus membrane was seen intact.
Available at www.neobiotechus.com
In a reduced bone height less than 3mm, the maxillary sinus membrane can be elevated using a micro-lateral sinus elevator in the SLA kit through the crestal approach. This is #1 elevator.
Available at www.neobiotechus.com
#2 elevator. After elevation of the membrane, bone graft was performed with an alloplast (Calpore)
Available at www.neobiotechus.com
CMI IS-II Active implant 4.5*11mm was placed in the site 25, achieving 30Ncm of insertion torque value.
Available at www.neobiotechus.com
CMI IS-II Active implant 5.0*8.5mm was placed in the site 26, achieving 30Ncm of insertion torque value.
Available at www.neobiotechus.com
The gaps between the implants and the bony socket walls were filled with an allogenic bone substitute material (RegenOss).
Available at www.neobiotechus.com
Healing abutments in place. Ø8.0 wide healing abutment was palced on tooth 26.
Available at www.neobiotechus.com
Radiograph taken after implant placement.
Available at www.neobiotechus.com
Clinical view of the implant site after 3 months of healing.
Available at www.neobiotechus.com
A 3 unit full zirconia SCPR was prefabricated.
Available at www.neobiotechus.com
3 SCRP multi-abutments were connected in the implant 3 months after the surgery.
Available at www.neobiotechus.com
The 3 unit SCRP full zirconia was cemented on the SCRP multi-abutments and the abutment-prosthesis unit was removed and polished and reinserted in the mouth.
Available at www.neobiotechus.com
top related