s commands · • showinterfacebridge-domaindetail, page 522 • showipinterfacebridge-domain, page...
Post on 11-May-2020
27 Views
Preview:
TRANSCRIPT
S Commands
• sampling-rate, page 25
• schedule, page 26
• scheduler, page 27
• scheduling, page 28
• scope, page 29
• scvmm, page 31
• second-file, page 32
• security-domain, page 33
• security, page 34
• security allow-promiscuous, page 35
• security forged-transmits, page 36
• security mac-changes, page 37
• send-community, page 38
• server, page 39
• service-policy, page 42
• service, page 47
• session-record-flags, page 48
• set, page 49
• set burst, page 52
• set cir, page 53
• set community, page 54
• set conform-cos-transmit, page 61
• set conform-dscp-transmit, page 62
• set conform, page 63
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 1
• set dampening, page 64
• set dscp-code, page 69
• set dscp, page 70
• set exceed-cos-transmit, page 71
• set exceed-dscp-transmit, page 72
• set exceed, page 73
• set excessive-burst, page 74
• set local-preference, page 75
• set metric-type, page 79
• set metric, page 83
• set mode, page 87
• set next-hop, page 88
• set pir, page 92
• set qos-class, page 93
• set tag, page 95
• set target-dscp, page 99
• set type, page 100
• set violate-cos-transmit, page 101
• set violate-dscp-transmit, page 102
• set violate, page 103
• set weight, page 104
• shellinabox, page 108
• show aaa authentication, page 109
• show aaa groups, page 110
• show access-list, page 111
• show accounting log, page 112
• show acllog deny l2 flow, page 113
• show acllog deny l2 flow tenant vrf, page 114
• show acllog deny l2 flow tenant vrf detail, page 115
• show acllog deny l2 pkt, page 116
• show acllog deny l2 pkt tenant vrf, page 117
• show acllog deny l2 pkt tenant vrf detail, page 118
• show acllog deny l3 flow, page 119
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)2
S Commands
• show acllog deny l3 flow tenant vrf, page 120
• show acllog deny l3 flow tenant vrf detail, page 121
• show acllog deny l3 pkt, page 122
• show acllog deny l3 pkt tenant vrf, page 123
• show acllog deny l3 pkt tenant vrf detail, page 124
• show acllog permit l2 flow tenant vrf, page 126
• show acllog permit l2 flow tenant vrf detail, page 127
• show acllog permit l2 pkt tenant vrf, page 128
• show acllog permit l2 pkt tenant vrf detail, page 129
• show acllog permit l3 flow tenant vrf, page 130
• show acllog permit l3 flow tenant vrf detail, page 131
• show acllog permit l3 pkt tenant vrf, page 132
• show acllog permit l3 pkt tenant vrf detail, page 133
• show analytics, page 135
• show application, page 136
• show audits, page 137
• show audits tenant, page 138
• show audits tenant application, page 139
• show audits tenant application epg, page 140
• show audits tenant bridge-domain, page 141
• show audits tenant bridge-domain detail, page 142
• show audits tenant interface bridge-domain, page 143
• show audits tenant interface bridge-domain detail, page 144
• show audits tenant multicast-route-maps, page 145
• show audits tenant vrf, page 146
• show audits tenant vrf acllog l2, page 147
• show audits tenant vrf acllog l3, page 148
• show audits tenant vrf detail, page 150
• show audits tenant vrf external-l3 bgp, page 151
• show audits tenant vrf external-l3 bgp node, page 152
• show audits tenant vrf external-l3 eigrp, page 153
• show audits tenant vrf external-l3 eigrp detail, page 154
• show audits tenant vrf external-l3 epg, page 155
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 3
S Commands
• show audits tenant vrf external-l3 epg detail, page 156
• show audits tenant vrf external-l3 epg name, page 157
• show audits tenant vrf external-l3 epg name detail, page 158
• show audits tenant vrf external-l3 interfaces, page 159
• show audits tenant vrf external-l3 interfaces detail, page 160
• show audits tenant vrf external-l3 ospf, page 161
• show audits tenant vrf external-l3 ospf detail, page 162
• show audits tenant vrf external-l3 static-route, page 163
• show audits tenant vrf external-l3 static-route detail, page 164
• show audits tenant vrf external-l3 static-route node, page 165
• show audits tenant vrf external-l3 static-route node detail, page 166
• show audits tenant vrf multicast, page 167
• show bridge-domain, page 168
• show bridge-domain detail, page 169
• show callhome, page 170
• show callhome common destination-profile, page 171
• show callhome common query-profile, page 172
• show callhome common transport-email, page 173
• show catalog, page 174
• show cli command, page 175
• show cli internal audit, page 176
• show cli internal transaction, page 177
• show cli internal usage, page 178
• show cli list, page 179
• show cli manpage, page 180
• show cli path, page 181
• show clock, page 182
• show communication ciphers, page 183
• show communication controller, page 184
• show communication http, page 185
• show communication https, page 186
• show communication shellinabox, page 187
• show communication ssh-service, page 188
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)4
S Commands
• show communication telnet, page 189
• show communication web-requests, page 190
• show contract-type, page 191
• show contract, page 192
• show controller, page 193
• show controller detail, page 194
• show cores, page 195
• show cores status, page 196
• show debug counter, page 197
• show debug log, page 198
• show deployment endpoint node, page 199
• show dns-address, page 200
• show dns-domain, page 201
• show dot1q-tunnel, page 202
• show endpoints, page 203
• show endpoints leaf interface ethernet, page 204
• show endpoints leaf interface port-channel, page 205
• show endpoints vpc, page 206
• show epg, page 207
• show epg detail, page 208
• show events, page 209
• show events controller, page 210
• show events controller detail, page 211
• show events leaf, page 212
• show events leaf fex, page 213
• show events leaf fex module, page 214
• show events leaf interface ethernet, page 215
• show events leaf interface l3instance, page 216
• show events leaf interface mgmt, page 217
• show events leaf interface portchannel, page 218
• show events leaf interface tunnel, page 219
• show events leaf inventory chassis, page 220
• show events leaf inventory fans, page 221
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 5
S Commands
• show events leaf inventory module, page 222
• show events leaf inventory module fabricport, page 223
• show events leaf inventory module leafport, page 224
• show events leaf inventory powersupply, page 225
• show events leaf inventory supervisor, page 226
• show events leaf protocol, page 227
• show events leaf vpc, page 228
• show events leaf vrf, page 229
• show events spine, page 230
• show events spine interface ethernet, page 231
• show events spine interface l3instance, page 232
• show events spine interface mgmt, page 233
• show events spine interface tunnel, page 234
• show events spine inventory chassis, page 235
• show events spine inventory fabric, page 236
• show events spine inventory fans, page 237
• show events spine inventory module, page 238
• show events spine inventory module fabricport, page 239
• show events spine inventory powersupply, page 240
• show events spine inventory supervisor, page 241
• show events spine inventory system, page 242
• show events spine protocol, page 243
• show events spine vrf, page 244
• show events tenant, page 245
• show events tenant application, page 246
• show events tenant application epg, page 247
• show events tenant bridge-domain, page 248
• show events tenant bridge-domain detail, page 249
• show events tenant endpoints, page 250
• show events tenant endpoints leaf interface ethernet, page 251
• show events tenant endpoints leaf interface port-channel, page 252
• show events tenant endpoints vpc, page 253
• show events tenant interface bridge-domain, page 255
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)6
S Commands
• show events tenant interface bridge-domain detail, page 256
• show events tenant multicast-route-maps, page 257
• show events tenant vrf, page 258
• show events tenant vrf acllog l2, page 259
• show events tenant vrf acllog l3, page 260
• show events tenant vrf detail, page 262
• show events tenant vrf external-l3 bgp, page 263
• show events tenant vrf external-l3 bgp node, page 264
• show events tenant vrf external-l3 eigrp, page 265
• show events tenant vrf external-l3 eigrp detail, page 266
• show events tenant vrf external-l3 epg, page 267
• show events tenant vrf external-l3 epg detail, page 268
• show events tenant vrf external-l3 epg name, page 269
• show events tenant vrf external-l3 epg name detail, page 270
• show events tenant vrf external-l3 interfaces, page 271
• show events tenant vrf external-l3 interfaces detail, page 272
• show events tenant vrf external-l3 ospf, page 273
• show events tenant vrf external-l3 ospf detail, page 274
• show events tenant vrf external-l3 route-map, page 275
• show events tenant vrf external-l3 route-map detail, page 276
• show events tenant vrf external-l3 static-route, page 277
• show events tenant vrf external-l3 static-route detail, page 278
• show events tenant vrf external-l3 static-route node, page 279
• show events tenant vrf external-l3 static-route node detail, page 280
• show events tenant vrf multicast, page 281
• show external-l2 epg, page 282
• show external-l2 epg name, page 283
• show external-l2 epg tenant, page 284
• show external-l3 bgp, page 285
• show external-l3 bgp tenant, page 286
• show external-l3 bgp tenant vrf, page 287
• show external-l3 bgp tenant vrf node, page 288
• show external-l3 eigrp, page 289
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 7
S Commands
• show external-l3 eigrp detail, page 290
• show external-l3 eigrp node, page 291
• show external-l3 eigrp node detail, page 292
• show external-l3 eigrp tenant, page 293
• show external-l3 eigrp tenant detail, page 294
• show external-l3 eigrp tenant vrf, page 295
• show external-l3 eigrp tenant vrf detail, page 296
• show external-l3 eigrp tenant vrf node, page 297
• show external-l3 eigrp tenant vrf node detail, page 298
• show external-l3 epg, page 299
• show external-l3 epg detail, page 300
• show external-l3 epg name, page 301
• show external-l3 epg name detail, page 302
• show external-l3 epg tenant, page 303
• show external-l3 epg tenant detail, page 304
• show external-l3 epg tenant vrf, page 305
• show external-l3 epg tenant vrf detail, page 306
• show external-l3 interfaces, page 307
• show external-l3 interfaces detail, page 308
• show external-l3 interfaces node, page 309
• show external-l3 interfaces node detail, page 310
• show external-l3 interfaces tenant, page 311
• show external-l3 interfaces tenant detail, page 312
• show external-l3 interfaces tenant vrf, page 313
• show external-l3 interfaces tenant vrf detail, page 314
• show external-l3 interfaces tenant vrf node, page 315
• show external-l3 interfaces tenant vrf node detail, page 316
• show external-l3 ospf, page 317
• show external-l3 ospf detail, page 318
• show external-l3 ospf node, page 319
• show external-l3 ospf node detail, page 320
• show external-l3 ospf tenant, page 321
• show external-l3 ospf tenant detail, page 322
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)8
S Commands
• show external-l3 ospf tenant vrf, page 323
• show external-l3 ospf tenant vrf detail, page 324
• show external-l3 ospf tenant vrf node, page 325
• show external-l3 ospf tenant vrf node detail, page 326
• show external-l3 route-map, page 327
• show external-l3 route-map detail, page 328
• show external-l3 route-map name, page 329
• show external-l3 route-map name detail, page 330
• show external-l3 route-map tenant, page 331
• show external-l3 route-map tenant detail, page 332
• show external-l3 route-map tenant vrf, page 333
• show external-l3 route-map tenant vrf detail, page 334
• show external-l3 route-map tenant vrf node, page 335
• show external-l3 route-map tenant vrf node detail, page 336
• show external-l3 static-route, page 337
• show external-l3 static-route detail, page 338
• show external-l3 static-route node, page 339
• show external-l3 static-route node detail, page 340
• show external-l3 static-route tenant, page 341
• show external-l3 static-route tenant detail, page 342
• show external-l3 static-route tenant vrf, page 343
• show external-l3 static-route tenant vrf detail, page 344
• show external-l3 static-route tenant vrf node, page 345
• show external-l3 static-route tenant vrf node detail, page 346
• show fabric-recovery status, page 347
• show faults, page 348
• show faults controller, page 350
• show faults controller detail, page 351
• show faults l4l7-cluster, page 352
• show faults l4l7-graph, page 353
• show faults leaf, page 354
• show faults leaf fex, page 355
• show faults leaf fex module, page 356
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 9
S Commands
• show faults leaf interface ethernet, page 357
• show faults leaf interface l3instance, page 358
• show faults leaf interface mgmt, page 359
• show faults leaf interface portchannel, page 360
• show faults leaf interface tunnel, page 361
• show faults leaf inventory chassis, page 362
• show faults leaf inventory fans, page 363
• show faults leaf inventory module, page 364
• show faults leaf inventory module fabricport, page 365
• show faults leaf inventory module leafport, page 366
• show faults leaf inventory powersupply, page 367
• show faults leaf inventory supervisor, page 368
• show faults leaf protocol, page 369
• show faults leaf vpc, page 370
• show faults leaf vrf, page 371
• show faults microsoft domain, page 372
• show faults microsoft domain name, page 373
• show faults microsoft domain name hyperv, page 374
• show faults microsoft domain name port-group, page 375
• show faults microsoft domain name scvmm, page 376
• show faults microsoft domain name vm, page 377
• show faults microsoft domain name vm name, page 378
• show faults spine, page 379
• show faults spine interface ethernet, page 380
• show faults spine interface l3instance, page 381
• show faults spine interface mgmt, page 382
• show faults spine interface tunnel, page 383
• show faults spine inventory chassis, page 384
• show faults spine inventory fabric, page 385
• show faults spine inventory fans, page 386
• show faults spine inventory module, page 387
• show faults spine inventory module fabricport, page 388
• show faults spine inventory powersupply, page 389
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)10
S Commands
• show faults spine inventory supervisor, page 390
• show faults spine inventory system, page 391
• show faults spine protocol, page 392
• show faults spine vrf, page 393
• show faults tenant, page 394
• show faults tenant application, page 395
• show faults tenant application epg, page 396
• show faults tenant bridge-domain, page 397
• show faults tenant bridge-domain detail, page 398
• show faults tenant interface bridge-domain, page 399
• show faults tenant interface bridge-domain detail, page 400
• show faults tenant multicast-route-maps, page 401
• show faults tenant vrf, page 402
• show faults tenant vrf acllog l2, page 403
• show faults tenant vrf acllog l3, page 404
• show faults tenant vrf detail, page 406
• show faults tenant vrf external-l3 bgp, page 407
• show faults tenant vrf external-l3 bgp node, page 408
• show faults tenant vrf external-l3 eigrp, page 409
• show faults tenant vrf external-l3 eigrp detail, page 410
• show faults tenant vrf external-l3 epg, page 411
• show faults tenant vrf external-l3 epg detail, page 412
• show faults tenant vrf external-l3 epg name, page 413
• show faults tenant vrf external-l3 epg name detail, page 414
• show faults tenant vrf external-l3 interfaces, page 415
• show faults tenant vrf external-l3 interfaces detail, page 416
• show faults tenant vrf external-l3 ospf, page 417
• show faults tenant vrf external-l3 ospf detail, page 418
• show faults tenant vrf external-l3 static-route, page 419
• show faults tenant vrf external-l3 static-route detail, page 420
• show faults tenant vrf external-l3 static-route node, page 421
• show faults tenant vrf external-l3 static-route node detail, page 422
• show faults tenant vrf multicast, page 423
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 11
S Commands
• show faults vmware domain, page 424
• show faults vmware domain name, page 425
• show faults vmware domain name epg, page 426
• show faults vmware domain name esx, page 427
• show faults vmware domain name port-group, page 428
• show faults vmware domain name trunk-portgroup, page 429
• show faults vmware domain name vcenter, page 430
• show faults vmware domain name vm, page 431
• show faults vmware domain name vm name, page 432
• show fips, page 433
• show firmware repository, page 434
• show firmware repository detail, page 435
• show firmware upgrade status, page 436
• show firmware upgrade status controller-group, page 437
• show firmware upgrade status controller-group detail, page 438
• show firmware upgrade status detail, page 439
• show firmware upgrade status switch-group, page 440
• show firmware upgrade status switch-group detail, page 441
• show flow exporter, page 442
• show flow exporter infra, page 443
• show flow exporter tenant, page 444
• show flow monitor, page 445
• show flow monitor infra, page 446
• show flow monitor tenant, page 447
• show flow node-policy, page 448
• show flow node-policy detail, page 449
• show flow record, page 450
• show flow record infra, page 451
• show flow record tenant, page 452
• show flow vm-exporter, page 453
• show health, page 454
• show health leaf, page 455
• show health leaf fex, page 456
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)12
S Commands
• show health leaf fex module, page 457
• show health leaf interface ethernet, page 458
• show health leaf interface l3instance, page 459
• show health leaf interface mgmt, page 460
• show health leaf interface portchannel, page 461
• show health leaf interface tunnel, page 462
• show health leaf inventory chassis, page 463
• show health leaf inventory fans, page 464
• show health leaf inventory module, page 465
• show health leaf inventory module fabricport, page 466
• show health leaf inventory module leafport, page 467
• show health leaf inventory powersupply, page 468
• show health leaf inventory supervisor, page 469
• show health leaf protocol, page 470
• show health leaf vpc, page 471
• show health leaf vrf, page 472
• show health spine, page 473
• show health spine interface ethernet, page 474
• show health spine interface l3instance, page 475
• show health spine interface mgmt, page 476
• show health spine interface tunnel, page 477
• show health spine inventory chassis, page 478
• show health spine inventory fabric, page 479
• show health spine inventory fans, page 480
• show health spine inventory module, page 481
• show health spine inventory module fabricport, page 482
• show health spine inventory powersupply, page 483
• show health spine inventory supervisor, page 484
• show health spine inventory system, page 485
• show health spine protocol, page 486
• show health spine vrf, page 487
• show health tenant, page 488
• show health tenant application, page 489
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 13
S Commands
• show health tenant application epg, page 490
• show health tenant bridge-domain, page 491
• show health tenant bridge-domain detail, page 492
• show health tenant interface bridge-domain, page 493
• show health tenant interface bridge-domain detail, page 494
• show health tenant multicast-route-maps, page 495
• show health tenant vrf, page 496
• show health tenant vrf acllog l2, page 497
• show health tenant vrf acllog l3, page 498
• show health tenant vrf detail, page 500
• show health tenant vrf external-l3 bgp, page 501
• show health tenant vrf external-l3 bgp node, page 502
• show health tenant vrf external-l3 eigrp, page 503
• show health tenant vrf external-l3 eigrp detail, page 504
• show health tenant vrf external-l3 epg, page 505
• show health tenant vrf external-l3 epg detail, page 506
• show health tenant vrf external-l3 epg name, page 507
• show health tenant vrf external-l3 epg name detail, page 508
• show health tenant vrf external-l3 interfaces, page 509
• show health tenant vrf external-l3 interfaces detail, page 510
• show health tenant vrf external-l3 ospf, page 511
• show health tenant vrf external-l3 ospf detail, page 512
• show health tenant vrf external-l3 static-route, page 513
• show health tenant vrf external-l3 static-route detail, page 514
• show health tenant vrf external-l3 static-route node, page 515
• show health tenant vrf external-l3 static-route node detail, page 516
• show health tenant vrf multicast, page 517
• show inband-mgmt, page 518
• show inband-mgmt controller, page 519
• show inband-mgmt switch, page 520
• show interface bridge-domain, page 521
• show interface bridge-domain detail, page 522
• show ip interface bridge-domain, page 523
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)14
S Commands
• show ipv6 interface bridge-domain, page 524
• show l4l7-cluster, page 525
• show l4l7-graph, page 526
• show l4l7-package, page 527
• show ldap-server, page 528
• show locator-led, page 529
• show locator-led status leaf, page 530
• show microsoft domain, page 531
• show microsoft domain name, page 532
• show microsoft domain name hyperv, page 533
• show microsoft domain name port-group, page 534
• show microsoft domain name scvmm, page 535
• show microsoft domain name vm, page 536
• show microsoft domain name vm name, page 537
• show microsoft vm, page 538
• show monitor access, page 539
• show monitor fabric, page 540
• show monitor tenant, page 541
• show monitor virtual, page 542
• show name-alias tenant, page 543
• show name-alias tenant acl, page 544
• show name-alias tenant application, page 545
• show name-alias tenant application epg, page 546
• show name-alias tenant bridge-domain, page 547
• show name-alias tenant contract, page 548
• show name-alias tenant contract subject, page 549
• show name-alias tenant l3out, page 550
• show name-alias tenant vrf, page 551
• show ntpq, page 552
• show oob-mgmt, page 553
• show oob-mgmt controller, page 554
• show oob-mgmt switch, page 555
• show policy-map, page 556
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 15
S Commands
• show policy-map type data-plane, page 557
• show policy-map type qos, page 558
• show port-channel leaf, page 559
• show port-channel map, page 560
• show port-channel map leaf, page 561
• show radius-server, page 562
• show resource, page 563
• show resource conflict encap-vlan epg, page 564
• show resource conflict encap-vlan epg node, page 565
• show role, page 566
• show running-config, page 567
• show sessions, page 568
• show sessions controller, page 569
• show sessions controller detail, page 570
• show sessions leaf, page 571
• show sessions spine, page 572
• show snapshot active, page 573
• show snapshot files, page 574
• show snapshot jobs, page 575
• show snmp, page 576
• show snmp clientgroups, page 577
• show snmp community, page 578
• show snmp engineid, page 579
• show snmp hosts, page 580
• show snmp summary, page 581
• show snmp users, page 582
• show stats, page 583
• show stats granularity communication controller, page 584
• show stats granularity leaf, page 585
• show stats granularity leaf fex, page 586
• show stats granularity leaf fex module, page 587
• show stats granularity leaf interface ethernet, page 588
• show stats granularity leaf interface mgmt, page 589
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)16
S Commands
• show stats granularity leaf interface portchannel, page 590
• show stats granularity leaf inventory chassis, page 591
• show stats granularity leaf inventory fans, page 592
• show stats granularity leaf inventory powersupply, page 593
• show stats granularity leaf inventory supervisor, page 594
• show stats granularity spine, page 595
• show stats granularity spine interface ethernet, page 596
• show stats granularity spine interface mgmt, page 597
• show stats granularity spine inventory chassis, page 598
• show stats granularity spine inventory fabric, page 599
• show stats granularity spine inventory fans, page 600
• show stats granularity spine inventory module, page 601
• show stats granularity spine inventory powersupply, page 602
• show stats granularity spine inventory supervisor, page 603
• show stats granularity spine inventory system, page 604
• show stats granularity tenant, page 605
• show stats granularity tenant application, page 606
• show stats granularity tenant application epg, page 607
• show stats granularity tenant dot1q-tunnel, page 608
• show stats granularity tenant multicast-route-maps, page 609
• show stats granularity tenant vrf, page 610
• show stats granularity tenant vrf acllog l2, page 611
• show stats granularity tenant vrf acllog l3, page 612
• show stats granularity tenant vrf detail, page 613
• show stats granularity tenant vrf external-l3 bgp, page 614
• show stats granularity tenant vrf external-l3 bgp node, page 615
• show stats granularity tenant vrf external-l3 eigrp, page 616
• show stats granularity tenant vrf external-l3 eigrp detail, page 617
• show stats granularity tenant vrf external-l3 epg, page 618
• show stats granularity tenant vrf external-l3 epg detail, page 619
• show stats granularity tenant vrf external-l3 epg name, page 620
• show stats granularity tenant vrf external-l3 epg name detail, page 621
• show stats granularity tenant vrf external-l3 interfaces, page 622
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 17
S Commands
• show stats granularity tenant vrf external-l3 interfaces detail, page 623
• show stats granularity tenant vrf external-l3 ospf, page 624
• show stats granularity tenant vrf external-l3 ospf detail, page 625
• show stats granularity tenant vrf external-l3 static-route, page 626
• show stats granularity tenant vrf external-l3 static-route detail, page 627
• show stats granularity tenant vrf external-l3 static-route node, page 628
• show stats granularity tenant vrf external-l3 static-route node detail, page 629
• show stats granularity tenant vrf multicast, page 630
• show switch, page 631
• show switch detail, page 632
• show tacacs-server, page 633
• show techsupport all, page 634
• show techsupport controllers, page 635
• show techsupport host, page 636
• show techsupport switch, page 637
• show tenant, page 638
• show tenant access-list, page 639
• show tenant application, page 640
• show tenant application endpoints, page 641
• show tenant application endpoints leaf interface ethernet, page 642
• show tenant application endpoints leaf interface port-channel, page 643
• show tenant application endpoints vpc, page 644
• show tenant application epg, page 645
• show tenant application epg detail, page 646
• show tenant application epg endpoints, page 647
• show tenant application epg endpoints leaf interface ethernet, page 648
• show tenant application epg endpoints leaf interface port-channel, page 649
• show tenant application epg endpoints vpc, page 650
• show tenant bridge-domain, page 652
• show tenant bridge-domain detail, page 653
• show tenant contract-type, page 654
• show tenant contract, page 655
• show tenant detail, page 656
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)18
S Commands
• show tenant dot1q-tunnel, page 657
• show tenant endpoints, page 658
• show tenant endpoints leaf interface ethernet, page 659
• show tenant endpoints leaf interface port-channel, page 660
• show tenant endpoints vpc, page 661
• show tenant epg, page 662
• show tenant epg detail, page 663
• show tenant external-l2 epg, page 664
• show tenant interface bridge-domain, page 665
• show tenant interface bridge-domain detail, page 666
• show tenant ip interface bridge-domain, page 667
• show tenant ipv6 interface bridge-domain, page 668
• show tenant multicast-route-maps, page 669
• show tenant policy-map, page 670
• show tenant policy-map type data-plane, page 671
• show tenant policy-map type qos, page 672
• show tenant vrf, page 673
• show tenant vrf acllog l2, page 674
• show tenant vrf acllog l3, page 675
• show tenant vrf detail, page 676
• show tenant vrf external-l3 bgp, page 677
• show tenant vrf external-l3 bgp node, page 678
• show tenant vrf external-l3 eigrp, page 679
• show tenant vrf external-l3 eigrp detail, page 680
• show tenant vrf external-l3 epg, page 681
• show tenant vrf external-l3 epg detail, page 682
• show tenant vrf external-l3 epg name, page 683
• show tenant vrf external-l3 epg name detail, page 684
• show tenant vrf external-l3 interfaces, page 685
• show tenant vrf external-l3 interfaces detail, page 686
• show tenant vrf external-l3 ospf, page 687
• show tenant vrf external-l3 ospf detail, page 688
• show tenant vrf external-l3 route-map, page 689
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 19
S Commands
• show tenant vrf external-l3 route-map detail, page 690
• show tenant vrf external-l3 static-route, page 691
• show tenant vrf external-l3 static-route detail, page 692
• show tenant vrf external-l3 static-route node, page 693
• show tenant vrf external-l3 static-route node detail, page 694
• show tenant vrf multicast, page 695
• show troubleshoot epext session, page 696
• show troubleshoot epext session atomiccounter, page 697
• show troubleshoot epext session audit, page 698
• show troubleshoot epext session contracts, page 699
• show troubleshoot epext session deployments, page 700
• show troubleshoot epext session events, page 701
• show troubleshoot epext session faults, page 702
• show troubleshoot epext session monitor, page 703
• show troubleshoot epext session reports, page 704
• show troubleshoot epext session statistics, page 705
• show troubleshoot epext session topology, page 706
• show troubleshoot epext session traceroute, page 707
• show troubleshoot epext sessions, page 708
• show troubleshoot eptoep session, page 709
• show troubleshoot eptoep session atomiccounter, page 710
• show troubleshoot eptoep session audit, page 711
• show troubleshoot eptoep session contracts, page 712
• show troubleshoot eptoep session deployments, page 713
• show troubleshoot eptoep session events, page 714
• show troubleshoot eptoep session faults, page 715
• show troubleshoot eptoep session monitor, page 716
• show troubleshoot eptoep session reports, page 717
• show troubleshoot eptoep session statistics, page 718
• show troubleshoot eptoep session topology, page 719
• show troubleshoot eptoep session traceroute, page 720
• show troubleshoot eptoep sessions, page 721
• show username, page 722
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)20
S Commands
• show username detail, page 723
• show version, page 724
• show vlan-domain, page 725
• show vmm internal debug, page 726
• show vmm internal debug epg, page 727
• show vmm internal debug mac, page 728
• show vmware domain, page 729
• show vmware domain name, page 730
• show vmware domain name epg, page 731
• show vmware domain name esx, page 732
• show vmware domain name port-group, page 733
• show vmware domain name trunk-portgroup, page 734
• show vmware domain name vcenter, page 735
• show vmware domain name vm, page 736
• show vmware domain name vm name, page 737
• show vmware vm, page 738
• show vpc, page 739
• show vpc map leaf, page 740
• show vrf, page 741
• show vrf detail, page 742
• show vsan-domain, page 743
• shut, page 744
• shutdown, page 745
• site-id, page 749
• slow-drain congestion-timeout action, page 750
• slow-drain congestion-timeout count, page 753
• slow-drain pause, page 756
• slow-timer, page 759
• snapshot download, page 760
• snapshot export, page 761
• snapshot import, page 762
• snapshot rollback, page 763
• snapshot upload, page 764
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 21
S Commands
• snmp-server clientgroup, page 765
• snmp-server community, page 766
• snmp-server contact, page 767
• snmp-server host, page 768
• snmp-server location, page 769
• snmp-server protocol, page 770
• snmp-server user, page 771
• source, page 772
• source application, page 774
• source interface ethernet, page 775
• source interface port-channel, page 776
• source interface vpc, page 777
• spanning-tree, page 778
• spanning-tree bpdu-filter, page 782
• spanning-tree bpdu-guard, page 783
• speed, page 784
• spf-interval, page 787
• spine-group, page 788
• spine-interface-group, page 789
• spine-interface-policy-group, page 790
• spine-interface-profile, page 792
• spine-profile, page 793
• spine, page 794
• ssh-key, page 795
• ssh-service, page 796
• ssl-protocols, page 797
• ssl-validation-level, page 798
• state, page 799
• static-endpoint, page 800
• static-tep, page 804
• statistics, page 808
• storm-control level, page 809
• storm-control pps, page 812
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)22
S Commands
• street-address, page 815
• subject, page 816
• subnet, page 817
• summary-address, page 818
• svcredir-pol, page 819
• switch-group, page 820
• switch, page 821
• switching, page 822
• switchport, page 823
• switchport access vlan tenant application, page 825
• switchport access vlan tenant external-svi, page 829
• switchport mode, page 832
• switchport port-security maximum, page 836
• switchport port-security violation, page 839
• switchport tenant, page 842
• switchport trunk allowed vlan inband-mgmt, page 845
• switchport trunk allowed vlan tenant application, page 846
• switchport trunk allowed vlan tenant external-l2, page 850
• switchport trunk allowed vlan tenant external-svi, page 853
• switchport trunk allowed vlan tenant legacy-forwarding, page 856
• switchport trunk allowed vsan tenant application, page 859
• switchport trunk native vlan tenant application, page 862
• switchport trunk native vlan tenant external-svi, page 866
• switchport vlan, page 869
• switchport vsan, page 872
• switchport vsan tenant application, page 875
• syslog, page 876
• system cluster-size, page 877
• system controller-id, page 878
• system dynamic-load-balance, page 879
• system fabric-security-mode, page 880
• system jumbomtu, page 881
• system pod, page 882
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 23
S Commands
• system switch-id, page 883
• system use-infra-gipo, page 884
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)24
S Commands
sampling-ratesampling-rate <samplingRate>
Description: Configure Sampling Rate
Syntax:
Configure Sampling Rate. Number range from=0 to=1000samplingRate
Command Mode: flow exporter : Configure NetFlow Exporter Policy
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-dvs(config-vmware-dvs)# flow exporter <WORD>(config-vmware-dvs-flow-exporter)# sampling-rate <samplingRate>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 25
S Commandssampling-rate
scheduleschedule <WORD>
Description: Assign a scheduler
Syntax:
scheduler name (Max Size 64)WORD
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# schedule <WORD>
schedule <WORD>
Description: Schedule snapshot export
Syntax:
Scheduler nameWORD
Command Mode: snapshot export : Configuration export setup mode
Command Path:
# configure [['terminal', 't']](config)# snapshot export <WORD>(config-export)# schedule <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)26
S Commandsschedule
schedulerscheduler pause
Description: Pause maintenance policy scheduler
Syntax:
Pause maintenance policy schedulerpause
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# scheduler pause
scheduler fabric|controller schedule <WORD>
Description: Scheduler configuration mode
Syntax:
Fabric schedulesfabric
Controller schedulescontroller
Configure a scheduleschedule
Schedule name (Max size 64)WORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# scheduler fabric|controller schedule <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 27
S Commandsscheduler
schedulingscheduling <WORD>
Description: Set the scheduling algorithm
Syntax:
Algorithm to chooseWORD
Command Mode: qos parameters : Configure the global QOS policies
Command Path:
# configure [['terminal', 't']](config)# qos parameters level1|level2|level3(config-qos)# scheduling <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)28
S Commandsscheduling
scopescope <WORD>
Description: Specify the scope for the contract
Syntax:
Contract ScopeWORD
Command Mode: contract : Configure binary contracts between Application EPGs
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# scope <WORD>
scope combinable
Description: Set route-profile scope
Syntax:
combinablecombinable
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable
scope global
Description: Set scope
Syntax:
Route-map will be available for use on all nodes in this tenant and vrfglobal
Command Mode: route-map : Create route-map or enter route-map command mode
Command Path:
# configure [['terminal', 't']]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 29
S Commandsscope
(config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global
scope combinable
Description: Set route-profile scope
Syntax:
combinablecombinable
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable
scope global
Description: Set scope
Syntax:
Route-map will be available for use on all nodes in this tenant and vrfglobal
Command Mode: route-map : Create route-map or enter route-map command mode
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)30
S Commandsscope
scvmmscvmm <arg> cloud <WORD> [name <name>]
Description: Configure an SCVMM in the Microsoft domain
Syntax:
arg
Cloud namecloud
Cloud Name (Max Size 512)WORD
(Optional) SCVMM Controller Namename
Command Mode: microsoft-domain : Create a VMMMicrosoft Domain
Command Path:
# configure [['terminal', 't']](config)# microsoft-domain <WORD> [delimiter <WORD>](config-microsoft)# scvmm <> cloud <WORD> [name <name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 31
S Commandsscvmm
second-filesecond-file <FILENAME>
Description: Second snapshot file name
Syntax:
Second snapshot file nameFILENAME
Command Mode: snapshot rollback : Configuration rollback setup mode
Command Path:
# configure [['terminal', 't']](config)# snapshot rollback <WORD>(config-rollback)# second-file <FILENAME>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)32
S Commandssecond-file
security-domainsecurity-domain <WORD>
Description: Add security domain
Syntax:
Security-domain nameWORD
Command Mode: vlan-domain : Configure vlan domain
Command Path:
# configure [['terminal', 't']](config)# vlan-domain <name> [dynamic] [type <domain-type>](config-vlan)# security-domain <WORD>
security-domain <WORD>
Description: Add a security domain to this VMware domain
Syntax:
Security domain name (Max Size 64)WORD
Command Mode: vmware-domain : Create a VMM VMWare Domain
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# security-domain <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 33
S Commandssecurity-domain
securitysecurity domain <WORD>
Description: Add a security domain to the tenant
Syntax:
Domaindomain
Security domain name (Max Size None)WORD
Command Mode: tenant : Tenant configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# security domain <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)34
S Commandssecurity
security allow-promiscuoussecurity allow-promiscuous <WORD>
Description: Enable/Disable promiscuous mode
Syntax:
Enable/Disable promiscuous modeWORD
Command Mode: vmware-domain : Associate EPG to a VMWare Domain
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security allow-promiscuous <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 35
S Commandssecurity allow-promiscuous
security forged-transmitssecurity forged-transmits <WORD>
Description: Accept/Reject Forced Transmits
Syntax:
Accept/Reject Forged TransmitsWORD
Command Mode: vmware-domain : Associate EPG to a VMWare Domain
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security forged-transmits <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)36
S Commandssecurity forged-transmits
security mac-changessecurity mac-changes <WORD>
Description: Accept/Reject Mac Changes
Syntax:
Accept/Reject Mac ChangesWORD
Command Mode: vmware-domain : Associate EPG to a VMWare Domain
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security mac-changes <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 37
S Commandssecurity mac-changes
send-communitysend-community [extended]
Description: Send Community attribute to this neighbor
Syntax:
(Optional) Send Extended Community attributeextended
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]
send-community [extended]
Description: Send Community attribute to this neighbor
Syntax:
(Optional) Send Extended Community attributeextended
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)38
S Commandssend-community
serverserver <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
Description: Add LDAP server to LDAP group
Syntax:
LDAP server name or IP addressA.B.C.D|A:B::C:D|WORD
priority of server within grouppriority
Priority of server within group. Number range from=0 to=16<0-16>
Command Mode: aaa group server ldap : LDAP server group name.
Command Path:
# configure [['terminal', 't']](config)# aaa group server ldap <WORD>(config-ldap)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
Description: Add RADIUS server to RADIUS group
Syntax:
RADIUS server name or IP addressA.B.C.D|A:B::C:D|WORD
priority of server within grouppriority
Priority of server within group. Number range from=0 to=16<0-16>
Command Mode: aaa group server radius : RADIUS server group name.
Command Path:
# configure [['terminal', 't']](config)# aaa group server radius <WORD>(config-radius)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
Description: Add TACACS PLUS server to TACACS PLUS group
Syntax:
TACACS PLUS server name or IP addressA.B.C.D|A:B::C:D|WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 39
S Commandsserver
priority of server within grouppriority
Priority of server within group. Number range from=0 to=16<0-16>
Command Mode: aaa group server tacacsplus : TACACS+ server group name.
Command Path:
# configure [['terminal', 't']](config)# aaa group server tacacsplus <WORD>(config-tacacsplus)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>
server <WORD> [prefer] [key <arg>] [use-vrf <arg>]
Description: Configure ntp servers for the active ntp policy
Syntax:
Server name/IP for the active ntp policy (Max Size 64)WORD
(Optional) Preferred server for the active ntp policyprefer
(Optional) Reference key id for authentication. Number range from=1to=65535
arg
(Optional) Configure management vrfarg
Command Mode: ntp : Configure the default ntp policy
Command Path:
# configure [['terminal', 't']](config)# pod <NUMBER>(config-pod)# ntp(config-ntp)# server <WORD> [prefer] [key <>] [use-vrf <>]
server <WORD> [prefer] [key <arg>] [use-vrf <arg>]
Description: Configure ntp servers for the active ntp policy
Syntax:
Server name/IP for the active ntp policy (Max Size 64)WORD
(Optional) Preferred server for the active ntp policyprefer
(Optional) Reference key id for authentication. Number range from=1to=65535
arg
(Optional) Configure management vrfarg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)40
S Commandsserver
Command Mode: template ntp-fabric : Network Time Protocol (NTP)
Command Path:
# configure [['terminal', 't']](config)# template ntp-fabric <WORD>(config-template-ntp-fabric)# server <WORD> [prefer] [key <>] [use-vrf <>]
server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>]
Description: Add a destination server
Syntax:
The hostname or ipaddress<host/ipaddr>
(Optional) The forwarding facility level for logs generatedfacility
(Optional) The severity level for logs generatedseverity
(Optional) MgmtEndpointmgmtepg
(Optional) Service port of the remote destination. Number range from=1to=65535
port
Command Mode: logging : Logging server group configuration mode
Command Path:
# configure [['terminal', 't']](config)# logging server-group <WORD>(config-logging)# server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg<mgmtepg>] [port <port>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 41
S Commandsserver
service-policyservice-policy <WORD>
Description: Specify the QOS service policy
Syntax:
Qos Service Policy (Max Size 64)WORD
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# service-policy <WORD>
service-policy <WORD>
Description: Specify the QOS service policy
Syntax:
Service policy to apply (Max Size 64)WORD
Command Mode: external-l2 : L2 external EPG creation/configuration
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# service-policy <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)42
S Commandsservice-policy
Qos Policy Name (Max Size 64)WORD
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 43
S Commandsservice-policy
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)44
S Commandsservice-policy
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>
service-policy type data-plane input|output <WORD>
Description: QOS service policy
Syntax:
Type of the Qos Policytype
QOS policy for Data Plane Policingdata-plane
Ingress Directioninput
Egress Directionoutput
Qos Policy Name (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 45
S Commandsservice-policy
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# service-policy type data-plane input|output <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)46
S Commandsservice-policy
serviceservice <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>][svcredir <Service Redirection>] [service-type <Service Type>]
Description: Configure L4-L7 Service
Syntax:
Service node name (Max Size 64)WORD
(Optional) Tenant name (Max Size 63)WORD
(Optional) Device cluster name (Max Size 64)WORD
(Optional) Configure service node modeAvailable Modes
(Optional) Configure service redirectionService Redirection
(Optional) Configure service node typeService Type
Command Mode: l4l7 graph : Configure L4-L7 Service Graph
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 graph <WORD> [contract <contract-option>](config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode<Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 47
S Commandsservice
session-record-flagssession-record-flags <sessionRecordFlags>
Description: Enable/Disable refresh in the session records, Comma separated values
Syntax:
Session record flags as comma separated values like val1,val2,..valN<sessionRecordFlags>
Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.
Command Path:
# configure [['terminal', 't']](config)# crypto webtoken(config-webtoken)# session-record-flags <sessionRecordFlags>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)48
S Commandssession-record-flags
setset qos-class <WORD>
Description: QOS level for the epg
Syntax:
QOS level for the epgqos-class
Qos LevelWORD
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# set qos-class <WORD>
set qos-class <WORD>
Description: QOS level for the application
Syntax:
QOS level for the applicationqos-class
Qos LevelWORD
Command Mode: application : application configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# set qos-class <WORD>
set qos-class <WORD>
Description: QOS level for the tunnel
Syntax:
QOS level for the tunnelqos-class
Qos LevelWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 49
S Commandsset
Command Mode: dot1q-tunnel : Tunnel configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# dot1q-tunnel <WORD>(config-tenant-tunnel)#set qos-class <WORD>
set qos-class <contractQosLevel>
Description: Specify the QOS level for the epg
Syntax:
class of QOS to specifyqos-class
{unspecified|level1|level2|level3}<contractQosLevel>
Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties orcreate new inband
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# inband-mgmt epg <WORD>(config-inb-epg)# set qos-class <contractQosLevel>
set qos-class <WORD>
Description: QOS level for the epg
Syntax:
QOS level for the epgqos-class
Qos LevelWORD
Command Mode: external-l2 : L2 external EPG creation/configuration
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# set qos-class <WORD>
set qos-class <contractQosLevel>
Description: QOS level for the epg
Syntax:
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)50
S Commandsset
class of QOS to specifyqos-class
{unspecified|level1|level2|level3}<contractQosLevel>
Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# oob-mgmt epg <epgval>(config-oob-epg)# set qos-class <contractQosLevel>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 51
S Commandsset
set burstset burst <0-549755813760> UNIT
Description: Burst Rate
Syntax:
Burst Rate<0-549755813760>
Burst Rate UnitUNIT
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set burst <0-549755813760> UNIT
set burst <0-549755813760> UNIT
Description: Burst Rate
Syntax:
Burst Rate<0-549755813760>
Burst Rate UnitUNIT
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set burst <0-549755813760> UNIT
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)52
S Commandsset burst
set cirset cir <0-4398046510080> UNIT
Description: Committed Rate
Syntax:
Committed Rate<0-4398046510080>
Committed Rate UnitUNIT
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set cir <0-4398046510080> UNIT
set cir <0-4398046510080> UNIT
Description: Committed Rate
Syntax:
Committed Rate<0-4398046510080>
Committed Rate UnitUNIT
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set cir <0-4398046510080> UNIT
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 53
S Commandsset cir
set communityset community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)54
S Commandsset community
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 55
S Commandsset community
Replace existing communityreplace
Do not change communitynone
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)56
S Commandsset community
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 57
S Commandsset community
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)58
S Commandsset community
(config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
set community regular|extended <value> additive|replace|none
Description: Set BGP community attribute
Syntax:
BGP regular communityregular
BGP extended communityextended
Community value in aa:nn formatvalue
Add to existing communityadditive
Replace existing communityreplace
Do not change communitynone
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 59
S Commandsset community
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)60
S Commandsset community
set conform-cos-transmitset conform-cos-transmit <0-6>
Description: Conform Policer Mark Cos
Syntax:
Conform Policer Mark Cos<0-6>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-cos-transmit <0-6>
set conform-cos-transmit <0-6>
Description: Conform Policer Mark Cos
Syntax:
Conform Policer Mark Cos<0-6>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-cos-transmit <0-6>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 61
S Commandsset conform-cos-transmit
set conform-dscp-transmitset conform-dscp-transmit <0-63>
Description: Conform Policer Mark DSCP
Syntax:
Conform Policer Mark DSCP<0-63>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-dscp-transmit <0-63>
set conform-dscp-transmit <0-63>
Description: Conform Policer Mark DSCP
Syntax:
Conform Policer Mark DSCP<0-63>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-dscp-transmit <0-63>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)62
S Commandsset conform-dscp-transmit
set conformset conform <WORD>
Description: Conform Policer Action
Syntax:
Conform Policer ActionWORD
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform <WORD>
set conform <WORD>
Description: Conform Policer Action
Syntax:
Conform Policer ActionWORD
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 63
S Commandsset conform
set dampeningset dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)64
S Commandsset dampening
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 65
S Commandsset dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)66
S Commandsset dampening
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 67
S Commandsset dampening
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Description: Route Flap dampening
Syntax:
Decay half life. Number range from=1 to=60<1-60>
Value to start reusing a route. Number range from=1 to=20000<1-20000>
Value to start suppressing a route. Number range from=1 to=20000<1-20000>
Maximum suppress time for stable route. Number range from=1 to=255<1-255>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)68
S Commandsset dampening
set dscp-codeset dscp-code <dscp-prop> <dscp-val>
Description: Set DSCP Class translation values
Syntax:
DSCP Class Namedscp-prop
Dscp valdscp-val
Command Mode: qos : Set DSCP Class translation values
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# qos dscp-map <WORD>(config-qos-cmap)# set dscp-code <dscp-prop> <dscp-val>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 69
S Commandsset dscp-code
set dscpset dscp <WORD>
Description: Specify the DSCP level for the EPG
Syntax:
DSCP valueWORD
Command Mode: external-l3 epg : External L3 EPG configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set dscp <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)70
S Commandsset dscp
set exceed-cos-transmitset exceed-cos-transmit <0-6>
Description: Exceed Policer Mark Cos
Syntax:
Exceed Policer Mark Cos<0-6>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-cos-transmit <0-6>
set exceed-cos-transmit <0-6>
Description: Exceed Policer Mark Cos
Syntax:
Exceed Policer Mark Cos<0-6>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-cos-transmit <0-6>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 71
S Commandsset exceed-cos-transmit
set exceed-dscp-transmitset exceed-dscp-transmit <0-63>
Description: Exceed Policer Mark DSCP
Syntax:
Exceed Policer Mark DSCP<0-63>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-dscp-transmit <0-63>
set exceed-dscp-transmit <0-63>
Description: Exceed Policer Mark DSCP
Syntax:
Exceed Policer Mark DSCP<0-63>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-dscp-transmit <0-63>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)72
S Commandsset exceed-dscp-transmit
set exceedset exceed <WORD>
Description: Exceed Policer Action
Syntax:
Exceed Policer ActionWORD
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed <WORD>
set exceed <WORD>
Description: Exceed Policer Action
Syntax:
Exceed Policer ActionWORD
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 73
S Commandsset exceed
set excessive-burstset excessive-burst <0-549755813760> UNIT
Description: Excessive Burst Rate
Syntax:
Excessive Burst Rate<0-549755813760>
Excessive Burst Rate UnitUNIT
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set excessive-burst <0-549755813760> UNIT
set excessive-burst <0-549755813760> UNIT
Description: Excessive Burst Rate
Syntax:
Excessive Burst Rate<0-549755813760>
Excessive Burst Rate UnitUNIT
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set excessive-burst <0-549755813760> UNIT
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)74
S Commandsset excessive-burst
set local-preferenceset local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 75
S Commandsset local-preference
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)76
S Commandsset local-preference
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 77
S Commandsset local-preference
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
set local-preference <0-4294967295>
Description: BGP local preference path attribute
Syntax:
Preference value<0-4294967295>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)78
S Commandsset local-preference
set metric-typeset metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 79
S Commandsset metric-type
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)80
S Commandsset metric-type
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 81
S Commandsset metric-type
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>
set metric-type <metric-type>
Description: Type of metric for destination routing protocol
Syntax:
<metric-type><metric-type>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)82
S Commandsset metric-type
set metricset metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 83
S Commandsset metric
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)84
S Commandsset metric
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 85
S Commandsset metric
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>
set metric <NUMBER>
Description: Set metric for destination routing protocol
Syntax:
Metric value. Number range from=0 to=255<0-255>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)86
S Commandsset metric
set modeset mode <WORD>
Description: Policer Mode
Syntax:
Policer ModeWORD
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set mode <WORD>
set mode <WORD>
Description: Policer Mode
Syntax:
Policer ModeWORD
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set mode <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 87
S Commandsset mode
set next-hopset next-hop <IPv4 or IPv6 address>
Description: Set next hop for destination routing protocol
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)88
S Commandsset next-hop
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 89
S Commandsset next-hop
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)90
S Commandsset next-hop
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
set next-hop <IPv4 or IPv6 address>
Description: Set next hop address
Syntax:
Next hop addressIPv4 or IPv6 address
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 91
S Commandsset next-hop
set pirset pir <0-4398046510080> UNIT
Description: Peak Rate
Syntax:
Peak Rate<0-4398046510080>
Pir UnitUNIT
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set pir <0-4398046510080> UNIT
set pir <0-4398046510080> UNIT
Description: Peak Rate
Syntax:
Peak Rate<0-4398046510080>
Pir UnitUNIT
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set pir <0-4398046510080> UNIT
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)92
S Commandsset pir
set qos-classset qos-class <WORD>
Description: Class of QOS to specify
Syntax:
Qos LevelWORD
Command Mode: contract : Configure binary contracts between Application EPGs
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set qos-class <WORD>
set qos-class <WORD> WORD
Description: Class of QOS to specify
Syntax:
Qos LevelWORD
Target QOS DirectionWORD
Command Mode: subject : Configuration a subject on the contract
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set qos-class <WORD> WORD
set qos-class unspecified|level1|level2|level3
Description: Specify the QOS level for the EPG
Syntax:
Unspecified QoS levelunspecified
QoS level1level1
QoS level2level2
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 93
S Commandsset qos-class
QoS level3level3
Command Mode: external-l3 epg : External L3 EPG configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set qos-class unspecified|level1|level2|level3
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)94
S Commandsset qos-class
set tagset tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 95
S Commandsset tag
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)96
S Commandsset tag
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 97
S Commandsset tag
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>
set tag <NUMBER>
Description: Tag value for destination routing protocol
Syntax:
Tag value. Number range from=0 to=4294967295<0-4294967295>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)98
S Commandsset tag
set target-dscpset target-dscp <WORD>
Description: class of target dscp to specify
Syntax:
Target dscpWORD
Command Mode: contract : Configure binary contracts between Application EPGs
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set target-dscp <WORD>
set target-dscp <WORD> WORD
Description: class of target dscp to specify
Syntax:
Target dscpWORD
Target DSCP DirectionWORD
Command Mode: subject : Configuration a subject on the contract
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set target-dscp <WORD> WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 99
S Commandsset target-dscp
set typeset type <WORD>
Description: Policer type
Syntax:
Policer TypeWORD
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set type <WORD>
set type <WORD>
Description: Policer type
Syntax:
Policer TypeWORD
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set type <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)100
S Commandsset type
set violate-cos-transmitset violate-cos-transmit <0-6>
Description: Violate Policer Mark Cos
Syntax:
Violate Policer Mark Cos<0-6>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-cos-transmit <0-6>
set violate-cos-transmit <0-6>
Description: Violate Policer Mark Cos
Syntax:
Violate Policer Mark Cos<0-6>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-cos-transmit <0-6>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 101
S Commandsset violate-cos-transmit
set violate-dscp-transmitset violate-dscp-transmit <0-63>
Description: Violate Policer Mark DSCP
Syntax:
Violate Policer Mark DSCP<0-63>
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-dscp-transmit <0-63>
set violate-dscp-transmit <0-63>
Description: Violate Policer Mark DSCP
Syntax:
Violate Policer Mark DSCP<0-63>
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-dscp-transmit <0-63>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)102
S Commandsset violate-dscp-transmit
set violateset violate <WORD>
Description: Violate Policer Action
Syntax:
Violate Policer ActionWORD
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate <WORD>
set violate <WORD>
Description: Violate Policer Action
Syntax:
Violate Policer ActionWORD
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 103
S Commandsset violate
set weightset weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: route-profile : Configure route-profile
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)104
S Commandsset weight
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 105
S Commandsset weight
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)106
S Commandsset weight
Command Mode: match bridge-domain : Match subnets of a bridge-domain
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: match prefix-list : Match entries of a prefix-list
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>
set weight <NUMBER>
Description:Weight value for destination routing protocol
Syntax:
Weight value. Number range from=0 to=65535<0-65535>
Command Mode: match route group : Route group
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 107
S Commandsset weight
shellinaboxshellinabox
Description: Configures the communication policy of the SHELLINABOX feature
Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https
Usage:
In the APIC GUI, the SHELLINABOX feature allows you to open a pop-up SSH session to a fabric switchby right-clicking the icon of the switch. To enable or disable this feature, use the shellinabox command toenter the SHELLINABOX communication policy group, then use the [no] admin-state-enable command.
Command Path:
# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# shellinabox
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)108
S Commandsshellinabox
show aaa authenticationshow aaa authentication
Description: Show AAA Authentication information
Command Mode: exec : Exec Mode
Command Path:
# show aaa authentication
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 109
S Commandsshow aaa authentication
show aaa groupsshow aaa groups
Description: Show AAA group information
Command Mode: exec : Exec Mode
Command Path:
# show aaa groups
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)110
S Commandsshow aaa groups
show access-listshow access-list WORD
Description: Show Access-list Information
Syntax:
Name of the Contract to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show access-list WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 111
S Commandsshow access-list
show accounting logshow accounting log
Description: CLI configuration command logs
Command Mode: exec : Exec Mode
Command Path:
# show accounting log
NOTE:
This command displays only those changes made using the command line interface (CLI). It does not displaychanges made using the GUI or the API. To view all changes made in the Management Information Tree, usethe show audit detail command.
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)112
S Commandsshow accounting log
show acllog deny l2 flowshow acllog deny l2 flow
Description: l3 flow information
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 113
S Commandsshow acllog deny l2 flow
show acllog deny l2 flow tenant vrfshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>
Description: tenant vrf information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source Interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)114
S Commandsshow acllog deny l2 flow tenant vrf
show acllog deny l2 flow tenant vrf detailshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source Interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 115
S Commandsshow acllog deny l2 flow tenant vrf detail
show acllog deny l2 pktshow acllog deny l2 pkt
Description: Pkt command
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)116
S Commandsshow acllog deny l2 pkt
show acllog deny l2 pkt tenant vrfshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Vrf Name
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) Source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 117
S Commandsshow acllog deny l2 pkt tenant vrf
show acllog deny l2 pkt tenant vrf detailshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) Source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)118
S Commandsshow acllog deny l2 pkt tenant vrf detail
show acllog deny l3 flowshow acllog deny l3 flow
Description: l3 flow information
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 119
S Commandsshow acllog deny l3 flow
show acllog deny l3 flow tenant vrfshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>
Description: tenant vrf information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) ProtocolProtocol
(Optional) source portSrcPort
(Optional) destination portDstPort
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)120
S Commandsshow acllog deny l3 flow tenant vrf
show acllog deny l3 flow tenant vrf detailshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Description: detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) ProtocolProtocol
(Optional) source portSrcPort
(Optional) destination portDstPort
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 121
S Commandsshow acllog deny l3 flow tenant vrf detail
show acllog deny l3 pktshow acllog deny l3 pkt
Description: Pkt command
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 pkt
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)122
S Commandsshow acllog deny l3 pkt
show acllog deny l3 pkt tenant vrfshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Vrf Name
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) protocolprotocol
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) Source port. Number range from=0 to=65535<0-65535>
(Optional) Destination port. Number range from=0 to=65535<0-65535>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 123
S Commandsshow acllog deny l3 pkt tenant vrf
show acllog deny l3 pkt tenant vrf detailshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) protocolprotocol
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) Source port. Number range from=0 to=65535<0-65535>
(Optional) Destination port. Number range from=0 to=65535<0-65535>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)124
S Commandsshow acllog deny l3 pkt tenant vrf detail
Command Path:
# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 125
S Commandsshow acllog deny l3 pkt tenant vrf detail
show acllog permit l2 flow tenant vrfshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>
Description: tenant vrf information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)126
S Commandsshow acllog permit l2 flow tenant vrf
show acllog permit l2 flow tenant vrf detailshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 127
S Commandsshow acllog permit l2 flow tenant vrf detail
show acllog permit l2 pkt tenant vrfshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Vrf Name
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)128
S Commandsshow acllog permit l2 pkt tenant vrf
show acllog permit l2 pkt tenant vrf detailshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 129
S Commandsshow acllog permit l2 pkt tenant vrf detail
show acllog permit l3 flow tenant vrfshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>
Description: tenant vrf information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) ProtocolProtocol
(Optional) source portSrcPort
(Optional) destination portDstPort
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)130
S Commandsshow acllog permit l3 flow tenant vrf
show acllog permit l3 flow tenant vrf detailshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Description: detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) ProtocolProtocol
(Optional) source portSrcPort
(Optional) destination portDstPort
(Optional) source interfacesrcintf
Name of the VRF to filter on (Max Size 64)WORD
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 131
S Commandsshow acllog permit l3 flow tenant vrf detail
show acllog permit l3 pkt tenant vrfshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Vrf Name
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) protocolprotocol
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) Source port. Number range from=0 to=65535<0-65535>
(Optional) Destination port. Number range from=0 to=65535<0-65535>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)132
S Commandsshow acllog permit l3 pkt tenant vrf
show acllog permit l3 pkt tenant vrf detailshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Detail information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the vrf to filter on (Max Size 64)WORD
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>
(Optional) protocolprotocol
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx
A.B.C.D or A:B::C:D
(Optional) Source port. Number range from=0 to=65535<0-65535>
(Optional) Destination port. Number range from=0 to=65535<0-65535>
(Optional) source Interfacesrcintf
(Optional) packet length. Number range from=1 to=65535<1-65535>
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 133
S Commandsshow acllog permit l3 pkt tenant vrf detail
Command Path:
# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)134
S Commandsshow acllog permit l3 pkt tenant vrf detail
show analyticsshow analytics
Description: Show analytics cluster configuration
Command Mode: exec : Exec Mode
Command Path:
# show analytics
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 135
S Commandsshow analytics
show applicationshow application WORD
Description: Show Application Profiles Information
Syntax:
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)136
S Commandsshow application
show auditsshow audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show audit-log information
Syntax:
(Optional) Log ID<log-id>
(Optional) Object action indicatoraction<action-type>
(Optional) Name of user<user-name>
(Optional) Logs created in time interval. Number range from=1 to=59<num-minutes>
(Optional) Logs created in time interval. Number range from=1 to=23<num-hours>
(Optional) Logs created in time interval. Number range from=1 to=999<num-days>
(Optional) Logs created in time interval<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Logs created in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Detailed audit-log information. Displays what was modifiedand displays the old and new settings.
detail
command scope<scope>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 137
S Commandsshow audits
show audits tenantshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)138
S Commandsshow audits tenant
show audits tenant applicationshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 139
S Commandsshow audits tenant application
show audits tenant application epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)140
S Commandsshow audits tenant application epg
show audits tenant bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 141
S Commandsshow audits tenant bridge-domain
show audits tenant bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)142
S Commandsshow audits tenant bridge-domain detail
show audits tenant interface bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 143
S Commandsshow audits tenant interface bridge-domain
show audits tenant interface bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)144
S Commandsshow audits tenant interface bridge-domain detail
show audits tenant multicast-route-mapsshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 145
S Commandsshow audits tenant multicast-route-maps
show audits tenant vrfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)146
S Commandsshow audits tenant vrf
show audits tenant vrf acllog l2show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan<NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 147
S Commandsshow audits tenant vrf acllog l2
show audits tenant vrf acllog l3show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)148
S Commandsshow audits tenant vrf acllog l3
<A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport<dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 149
S Commandsshow audits tenant vrf acllog l3
show audits tenant vrf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)150
S Commandsshow audits tenant vrf detail
show audits tenant vrf external-l3 bgpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 151
S Commandsshow audits tenant vrf external-l3 bgp
show audits tenant vrf external-l3 bgp nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)152
S Commandsshow audits tenant vrf external-l3 bgp node
show audits tenant vrf external-l3 eigrpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 153
S Commandsshow audits tenant vrf external-l3 eigrp
show audits tenant vrf external-l3 eigrp detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)154
S Commandsshow audits tenant vrf external-l3 eigrp detail
show audits tenant vrf external-l3 epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 155
S Commandsshow audits tenant vrf external-l3 epg
show audits tenant vrf external-l3 epg detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)156
S Commandsshow audits tenant vrf external-l3 epg detail
show audits tenant vrf external-l3 epg nameshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 157
S Commandsshow audits tenant vrf external-l3 epg name
show audits tenant vrf external-l3 epg name detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)158
S Commandsshow audits tenant vrf external-l3 epg name detail
show audits tenant vrf external-l3 interfacesshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 159
S Commandsshow audits tenant vrf external-l3 interfaces
show audits tenant vrf external-l3 interfaces detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)160
S Commandsshow audits tenant vrf external-l3 interfaces detail
show audits tenant vrf external-l3 ospfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 161
S Commandsshow audits tenant vrf external-l3 ospf
show audits tenant vrf external-l3 ospf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)162
S Commandsshow audits tenant vrf external-l3 ospf detail
show audits tenant vrf external-l3 static-routeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 163
S Commandsshow audits tenant vrf external-l3 static-route
show audits tenant vrf external-l3 static-route detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)164
S Commandsshow audits tenant vrf external-l3 static-route detail
show audits tenant vrf external-l3 static-route nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 165
S Commandsshow audits tenant vrf external-l3 static-route node
show audits tenant vrf external-l3 static-route node detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)166
S Commandsshow audits tenant vrf external-l3 static-route node detail
show audits tenant vrf multicastshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 167
S Commandsshow audits tenant vrf multicast
show bridge-domainshow bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)168
S Commandsshow bridge-domain
show bridge-domain detailshow bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 169
S Commandsshow bridge-domain detail
show callhomeshow callhome common
Description: Show command for callhome
Syntax:
Commoncommon
Command Mode: exec : Exec Mode
Command Path:
# show callhome common
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)170
S Commandsshow callhome
show callhome common destination-profileshow callhome common destination-profile
Description: Show command for callhome destination-profile
Syntax:
Commoncommon
Command Mode: exec : Exec Mode
Command Path:
# show callhome common destination-profile
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 171
S Commandsshow callhome common destination-profile
show callhome common query-profileshow callhome common query-profile
Description: Show command for callhome destination-profile
Syntax:
Commoncommon
Command Mode: exec : Exec Mode
Command Path:
# show callhome common query-profile
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)172
S Commandsshow callhome common query-profile
show callhome common transport-emailshow callhome common transport-email
Description: Show command for callhome transport-email
Syntax:
Commoncommon
Command Mode: exec : Exec Mode
Command Path:
# show callhome common transport-email
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 173
S Commandsshow callhome common transport-email
show catalogshow catalog
Description: Show catalog information
Command Mode: exec : Exec Mode
Command Path:
# show catalog
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)174
S Commandsshow catalog
show cli commandshow cli command <WORD> [mode <mode-name>]
Description: Show Commands Syntax
Syntax:
Command Name pattern between single quotesWORD
(Optional) Mode name pattern between single quotes<mode-name>
(Optional) Show Command Detailsdetails
Command Mode: exec : Exec Mode
Command Path:
# show cli command <WORD> [mode <mode-name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 175
S Commandsshow cli command
show cli internal auditshow cli internal audit
Description: Show Commands Audit
Command Mode: exec : Exec Mode
Command Path:
# show cli internal audit
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)176
S Commandsshow cli internal audit
show cli internal transactionshow cli internal transaction logs|xml <NUMBER>
Description: Show Transaction Details
Syntax:
Show Transaction Logslogs
Show Transaction XML Postxml
Transaction ID(TID) to grep log lines with similar TIDs. TID can beextracted from the 'show cli internal audit' command. Number rangefrom=0 to=9223372036854775807
<Transaction ID>
Command Mode: exec : Exec Mode
Command Path:
# show cli internal transaction logs|xml <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 177
S Commandsshow cli internal transaction
show cli internal usageshow cli internal usage
Description: Show Commands with Usage Callback
Syntax:
(Optional) Show Command Detailsdetails
Command Mode: exec : Exec Mode
Command Path:
# show cli internal usage
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)178
S Commandsshow cli internal usage
show cli listshow cli list [mode <mode-name>]
Description: Show all cli-related commands
Syntax:
(Optional) Mode name pattern between single quotes<mode-name>
(Optional) Show Command Detailsdetails
Command Mode: exec : Exec Mode
Command Path:
# show cli list [mode <mode-name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 179
S Commandsshow cli list
show cli manpageshow cli manpage <WORD> [mode <mode-name>]
Description: Show Commands ManPage
Syntax:
Command Name pattern between single quotesWORD
(Optional) Mode name pattern between single quotes<mode-name>
(Optional) Show Command Detailsdetails
Command Mode: exec : Exec Mode
Command Path:
# show cli manpage <WORD> [mode <mode-name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)180
S Commandsshow cli manpage
show cli pathshow cli path <WORD> [mode <mode-name>]
Description: Show Commands Path
Syntax:
Command Name pattern between single quotesWORD
(Optional) Mode name pattern between single quotes<mode-name>
(Optional) Show Command Detailsdetails
Command Mode: exec : Exec Mode
Command Path:
# show cli path <WORD> [mode <mode-name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 181
S Commandsshow cli path
show clockshow clock
Description: Show clock information
Command Mode: exec : Exec Mode
Command Path:
# show clock
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)182
S Commandsshow clock
show communication ciphersshow communication ciphers
Description: HTTPS service cipher suite listings
Command Mode: exec : Exec Mode
Command Path:
# show communication ciphers
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 183
S Commandsshow communication ciphers
show communication controllershow communication controller node-id
Description: Show command for nginx web-requests
Syntax:
node-idnode-id
Command Mode: exec : Exec Mode
Command Path:
# show communication controller node-id
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)184
S Commandsshow communication controller
show communication httpshow communication http
Description: HTTP service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication http
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 185
S Commandsshow communication http
show communication httpsshow communication https
Description: HTTPS service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication https
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)186
S Commandsshow communication https
show communication shellinaboxshow communication shellinabox
Description: Shellinabox service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication shellinabox
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 187
S Commandsshow communication shellinabox
show communication ssh-serviceshow communication ssh-service
Description: SSH service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication ssh-service
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)188
S Commandsshow communication ssh-service
show communication telnetshow communication telnet
Description: Telnet service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication telnet
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 189
S Commandsshow communication telnet
show communication web-requestsshow communication web-requests
Description: Status of last web requests
Command Mode: exec : Exec Mode
Command Path:
# show communication web-requests
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)190
S Commandsshow communication web-requests
show contract-typeshow contract-type WORD
Description: Show Contracts Information Based on Type
Syntax:
whitelist (permit) or blacklist(deny) or oob-mgmt type of contractWORD
Command Mode: exec : Exec Mode
Command Path:
# show contract-type WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 191
S Commandsshow contract-type
show contractshow contract WORD
Description: Show Contracts Information
Syntax:
Name of the Contract to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show contract WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)192
S Commandsshow contract
show controllershow controller
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show controller
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 193
S Commandsshow controller
show controller detailshow controller detail [id <node-id>]
Description: Detailed controller information
Syntax:
(Optional) Optional Serial numbernode-id
Command Mode: exec : Exec Mode
Command Path:
# show controller detail [id <node-id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)194
S Commandsshow controller detail
show coresshow cores
Description: Show all core dumps
Command Mode: exec : Exec Mode
Command Path:
# show cores
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 195
S Commandsshow cores
show cores statusshow cores status
Description: Show exported core status
Command Mode: exec : Exec Mode
Command Path:
# show cores status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)196
S Commandsshow cores status
show debug countershow debug <node-name> <process> counter <counterTopics>
Description: Show Counter information
Syntax:
Node name<node-name>
Process name<process>
Counter Topics<counterTopics>
Command Mode: exec : Exec Mode
Command Path:
# show debug <node-name> <process> counter <counterTopics>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 197
S Commandsshow debug counter
show debug logshow debug <node-name> <process> log
Description: Show log level information
Syntax:
Node name<node-name>
Process name<process>
Command Mode: exec : Exec Mode
Command Path:
# show debug <node-name> <process> log
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)198
S Commandsshow debug log
show deployment endpoint nodeshow deployment endpoint node <node>
Description: Node id
Syntax:
<node><node>
Command Mode: exec : Exec Mode
Command Path:
# show deployment endpoint node <node>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 199
S Commandsshow deployment endpoint node
show dns-addressshow dns-address
Description: Show dns address information
Command Mode: exec : Exec Mode
Command Path:
# show dns-address
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)200
S Commandsshow dns-address
show dns-domainshow dns-domain
Description: Show dns domain information
Command Mode: exec : Exec Mode
Command Path:
# show dns-domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 201
S Commandsshow dns-domain
show dot1q-tunnelshow dot1q-tunnel WORD
Description: Show Dot1q-tunnel Information
Syntax:
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show dot1q-tunnel WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)202
S Commandsshow dot1q-tunnel
show endpointsshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints
Syntax:
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 203
S Commandsshow endpoints
show endpoints leaf interface ethernetshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface ethernet
Syntax:
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Ethernet Rangeethernet [<fex>/]<slot>/<port>
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet[<fex>/]<slot>/<port>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)204
S Commandsshow endpoints leaf interface ethernet
show endpoints leaf interface port-channelshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on an interface port-channel
Syntax:
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Port Channel Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel<WORD> [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 205
S Commandsshow endpoints leaf interface port-channel
show endpoints vpcshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex<fex>]
Description: Show IP endpoints on vpc
Syntax:
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
VPC Contextcontext
First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
VPC Interface nameinterface
VPC Interface namevpc
VPC Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164fex
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interfacevpc <WORD> [fex <fex>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)206
S Commandsshow endpoints vpc
show epgshow epg WORD
Description: Show Application EPG Information
Syntax:
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 207
S Commandsshow epg
show epg detailshow epg WORD detail
Description: Show detailed view of Application EPg
Syntax:
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show epg WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)208
S Commandsshow epg detail
show eventsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show event information
Syntax:
(Optional) Event code<event-code>
(Optional) Event ID<event-ID>
(Optional) Cause<event-value>
(Optional) Event activity in time interval. Number range from=1 to=59last-minutes <num-minutes>
(Optional) Event activity in time interval. Number range from=1 to=23last-hours <num-hours>
(Optional) Event activity in time interval. Number range from=1 to=999last-days <num-days>
(Optional) Event activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Event activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Detailed event informationdetail
command scope<scope>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 209
S Commandsshow events
show events controllershow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)210
S Commandsshow events controller
show events controller detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Description: Detailed controller information
Syntax:
(Optional) Optional Serial numbernode-id
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 211
S Commandsshow events controller detail
show events leafshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Description: Show command for leaf
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)212
S Commandsshow events leaf
show events leaf fexshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>
Description: Show extended chassis information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 213
S Commandsshow events leaf fex
show events leaf fex moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)214
S Commandsshow events leaf fex module
show events leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 215
S Commandsshow events leaf interface ethernet
show events leaf interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)216
S Commandsshow events leaf interface l3instance
show events leaf interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 217
S Commandsshow events leaf interface mgmt
show events leaf interface portchannelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>
Description: Port channel interface
Syntax:
Leaf id<leafId>
<Port channel number><portChan>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)218
S Commandsshow events leaf interface portchannel
show events leaf interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 219
S Commandsshow events leaf interface tunnel
show events leaf inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)220
S Commandsshow events leaf inventory chassis
show events leaf inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 221
S Commandsshow events leaf inventory fans
show events leaf inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)222
S Commandsshow events leaf inventory module
show events leaf inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport<fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 223
S Commandsshow events leaf inventory module fabricport
show events leaf inventory module leafportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show information for leaf port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the leaf port number<leafPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport<leafPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)224
S Commandsshow events leaf inventory module leafport
show events leaf inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 225
S Commandsshow events leaf inventory powersupply
show events leaf inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)226
S Commandsshow events leaf inventory supervisor
show events leaf protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 227
S Commandsshow events leaf protocol
show events leaf vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>
Description: Virtual port channel information
Syntax:
Leaf id<leafId>
pls enter virtual port channel number<vpcPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)228
S Commandsshow events leaf vpc
show events leaf vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 229
S Commandsshow events leaf vrf
show events spineshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Description: Show command for spine
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)230
S Commandsshow events spine
show events spine interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 231
S Commandsshow events spine interface ethernet
show events spine interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)232
S Commandsshow events spine interface l3instance
show events spine interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 233
S Commandsshow events spine interface mgmt
show events spine interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)234
S Commandsshow events spine interface tunnel
show events spine inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 235
S Commandsshow events spine inventory chassis
show events spine inventory fabricshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>
Description: Show information for fabric module
Syntax:
Leaf id<leafId>
pls enter the fabric module number<fcMod>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)236
S Commandsshow events spine inventory fabric
show events spine inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 237
S Commandsshow events spine inventory fans
show events spine inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)238
S Commandsshow events spine inventory module
show events spine inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>fabricport <fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 239
S Commandsshow events spine inventory module fabricport
show events spine inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)240
S Commandsshow events spine inventory powersupply
show events spine inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 241
S Commandsshow events spine inventory supervisor
show events spine inventory systemshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>
Description: Show information for system module
Syntax:
Leaf id<leafId>
pls enter the system module number<sysMod>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)242
S Commandsshow events spine inventory system
show events spine protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 243
S Commandsshow events spine protocol
show events spine vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)244
S Commandsshow events spine vrf
show events tenantshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 245
S Commandsshow events tenant
show events tenant applicationshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)246
S Commandsshow events tenant application
show events tenant application epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 247
S Commandsshow events tenant application epg
show events tenant bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)248
S Commandsshow events tenant bridge-domain
show events tenant bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 249
S Commandsshow events tenant bridge-domain detail
show events tenant endpointsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)250
S Commandsshow events tenant endpoints
show events tenant endpoints leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface ethernet
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Ethernet Rangeethernet [<fex>/]<slot>/<port>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 251
S Commandsshow events tenant endpoints leaf interface ethernet
show events tenant endpoints leaf interface port-channelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on an interface port-channel
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Port Channel Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)252
S Commandsshow events tenant endpoints leaf interface port-channel
show events tenant endpoints vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]
Description: Show IP endpoints on vpc
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
VPC Contextcontext
First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
VPC Interface nameinterface
VPC Interface namevpc
VPC Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164fex
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 253
S Commandsshow events tenant endpoints vpc
<A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)254
S Commandsshow events tenant endpoints vpc
show events tenant interface bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 255
S Commandsshow events tenant interface bridge-domain
show events tenant interface bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)256
S Commandsshow events tenant interface bridge-domain detail
show events tenant multicast-route-mapsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 257
S Commandsshow events tenant multicast-route-maps
show events tenant vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)258
S Commandsshow events tenant vrf
show events tenant vrf acllog l2show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2flow vlan <NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 259
S Commandsshow events tenant vrf acllog l2
show events tenant vrf acllog l3show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)260
S Commandsshow events tenant vrf acllog l3
flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport>dstport <dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 261
S Commandsshow events tenant vrf acllog l3
show events tenant vrf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)262
S Commandsshow events tenant vrf detail
show events tenant vrf external-l3 bgpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 263
S Commandsshow events tenant vrf external-l3 bgp
show events tenant vrf external-l3 bgp nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node<101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)264
S Commandsshow events tenant vrf external-l3 bgp node
show events tenant vrf external-l3 eigrpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 265
S Commandsshow events tenant vrf external-l3 eigrp
show events tenant vrf external-l3 eigrp detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)266
S Commandsshow events tenant vrf external-l3 eigrp detail
show events tenant vrf external-l3 epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 267
S Commandsshow events tenant vrf external-l3 epg
show events tenant vrf external-l3 epg detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)268
S Commandsshow events tenant vrf external-l3 epg detail
show events tenant vrf external-l3 epg nameshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 269
S Commandsshow events tenant vrf external-l3 epg name
show events tenant vrf external-l3 epg name detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)270
S Commandsshow events tenant vrf external-l3 epg name detail
show events tenant vrf external-l3 interfacesshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 271
S Commandsshow events tenant vrf external-l3 interfaces
show events tenant vrf external-l3 interfaces detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfacesdetail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)272
S Commandsshow events tenant vrf external-l3 interfaces detail
show events tenant vrf external-l3 ospfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 273
S Commandsshow events tenant vrf external-l3 ospf
show events tenant vrf external-l3 ospf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)274
S Commandsshow events tenant vrf external-l3 ospf detail
show events tenant vrf external-l3 route-mapshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]
Description: Show command for external-l3 route-map
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
(Optional) Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 275
S Commandsshow events tenant vrf external-l3 route-map
show events tenant vrf external-l3 route-map detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]detail
Description: Show external-l3 route-map in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
(Optional) Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>] detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)276
S Commandsshow events tenant vrf external-l3 route-map detail
show events tenant vrf external-l3 static-routeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 277
S Commandsshow events tenant vrf external-l3 static-route
show events tenant vrf external-l3 static-route detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routedetail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)278
S Commandsshow events tenant vrf external-l3 static-route detail
show events tenant vrf external-l3 static-route nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 279
S Commandsshow events tenant vrf external-l3 static-route node
show events tenant vrf external-l3 static-route node detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)280
S Commandsshow events tenant vrf external-l3 static-route node detail
show events tenant vrf multicastshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 281
S Commandsshow events tenant vrf multicast
show external-l2 epgshow external-l2 epg
Description: Show command for external-l2 epgs
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)282
S Commandsshow external-l2 epg
show external-l2 epg nameshow external-l2 epg name WORD
Description: EPG name to filter on
Syntax:
Name of the EPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg name WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 283
S Commandsshow external-l2 epg name
show external-l2 epg tenantshow external-l2 epg tenant WORD
Description: tenant to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)284
S Commandsshow external-l2 epg tenant
show external-l3 bgpshow external-l3 bgp
Description: Show command for BGP peers
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 285
S Commandsshow external-l3 bgp
show external-l3 bgp tenantshow external-l3 bgp tenant <WORD>
Description: tenant to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)286
S Commandsshow external-l3 bgp tenant
show external-l3 bgp tenant vrfshow external-l3 bgp tenant <WORD> vrf WORD
Description: vrf to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 287
S Commandsshow external-l3 bgp tenant vrf
show external-l3 bgp tenant vrf nodeshow external-l3 bgp tenant <WORD> vrf WORD node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)288
S Commandsshow external-l3 bgp tenant vrf node
show external-l3 eigrpshow external-l3 eigrp
Description: Show command for external-l3 eigrp
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 289
S Commandsshow external-l3 eigrp
show external-l3 eigrp detailshow external-l3 eigrp detail
Description: Show interanl details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)290
S Commandsshow external-l3 eigrp detail
show external-l3 eigrp nodeshow external-l3 eigrp node <101-4000>
Description: Node(s) to filter on
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 291
S Commandsshow external-l3 eigrp node
show external-l3 eigrp node detailshow external-l3 eigrp node <101-4000> detail
Description: Show interanl details
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)292
S Commandsshow external-l3 eigrp node detail
show external-l3 eigrp tenantshow external-l3 eigrp tenant <WORD>
Description: Tenant(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 293
S Commandsshow external-l3 eigrp tenant
show external-l3 eigrp tenant detailshow external-l3 eigrp tenant <WORD> detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)294
S Commandsshow external-l3 eigrp tenant detail
show external-l3 eigrp tenant vrfshow external-l3 eigrp tenant <WORD> vrf WORD
Description: Vrf(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 295
S Commandsshow external-l3 eigrp tenant vrf
show external-l3 eigrp tenant vrf detailshow external-l3 eigrp tenant <WORD> vrf WORD detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)296
S Commandsshow external-l3 eigrp tenant vrf detail
show external-l3 eigrp tenant vrf nodeshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>
Description: Node(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 297
S Commandsshow external-l3 eigrp tenant vrf node
show external-l3 eigrp tenant vrf node detailshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)298
S Commandsshow external-l3 eigrp tenant vrf node detail
show external-l3 epgshow external-l3 epg
Description: Show command for external-l3 epgs
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 299
S Commandsshow external-l3 epg
show external-l3 epg detailshow external-l3 epg detail
Description: external-l3 epg in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)300
S Commandsshow external-l3 epg detail
show external-l3 epg nameshow external-l3 epg name <epgName>
Description: EPG name to filter on
Syntax:
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 301
S Commandsshow external-l3 epg name
show external-l3 epg name detailshow external-l3 epg name <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)302
S Commandsshow external-l3 epg name detail
show external-l3 epg tenantshow external-l3 epg tenant <WORD>
Description: tenant to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 303
S Commandsshow external-l3 epg tenant
show external-l3 epg tenant detailshow external-l3 epg tenant <WORD> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)304
S Commandsshow external-l3 epg tenant detail
show external-l3 epg tenant vrfshow external-l3 epg tenant <WORD> vrf WORD
Description: vrf to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 305
S Commandsshow external-l3 epg tenant vrf
show external-l3 epg tenant vrf detailshow external-l3 epg tenant <WORD> vrf WORD detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)306
S Commandsshow external-l3 epg tenant vrf detail
show external-l3 interfacesshow external-l3 interfaces
Description: Show command for external-l3 interfaces
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 307
S Commandsshow external-l3 interfaces
show external-l3 interfaces detailshow external-l3 interfaces detail
Description: Show interanl details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)308
S Commandsshow external-l3 interfaces detail
show external-l3 interfaces nodeshow external-l3 interfaces node <101-4000>
Description: Node(s) to filter on
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 309
S Commandsshow external-l3 interfaces node
show external-l3 interfaces node detailshow external-l3 interfaces node <101-4000> detail
Description: Show interanl details
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)310
S Commandsshow external-l3 interfaces node detail
show external-l3 interfaces tenantshow external-l3 interfaces tenant <WORD>
Description: Tenant(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 311
S Commandsshow external-l3 interfaces tenant
show external-l3 interfaces tenant detailshow external-l3 interfaces tenant <WORD> detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)312
S Commandsshow external-l3 interfaces tenant detail
show external-l3 interfaces tenant vrfshow external-l3 interfaces tenant <WORD> vrf WORD
Description: Vrf(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 313
S Commandsshow external-l3 interfaces tenant vrf
show external-l3 interfaces tenant vrf detailshow external-l3 interfaces tenant <WORD> vrf WORD detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)314
S Commandsshow external-l3 interfaces tenant vrf detail
show external-l3 interfaces tenant vrf nodeshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>
Description: Node(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 315
S Commandsshow external-l3 interfaces tenant vrf node
show external-l3 interfaces tenant vrf node detailshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)316
S Commandsshow external-l3 interfaces tenant vrf node detail
show external-l3 ospfshow external-l3 ospf
Description: Show command for external-l3 ospf
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 317
S Commandsshow external-l3 ospf
show external-l3 ospf detailshow external-l3 ospf detail
Description: Show internal details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)318
S Commandsshow external-l3 ospf detail
show external-l3 ospf nodeshow external-l3 ospf node <101-4000>
Description: Node(s) to filter on
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 319
S Commandsshow external-l3 ospf node
show external-l3 ospf node detailshow external-l3 ospf node <101-4000> detail
Description: Show internal details
Syntax:
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)320
S Commandsshow external-l3 ospf node detail
show external-l3 ospf tenantshow external-l3 ospf tenant <WORD>
Description: Tenant(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 321
S Commandsshow external-l3 ospf tenant
show external-l3 ospf tenant detailshow external-l3 ospf tenant <WORD> detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)322
S Commandsshow external-l3 ospf tenant detail
show external-l3 ospf tenant vrfshow external-l3 ospf tenant <WORD> vrf WORD
Description: Vrf(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 323
S Commandsshow external-l3 ospf tenant vrf
show external-l3 ospf tenant vrf detailshow external-l3 ospf tenant <WORD> vrf WORD detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)324
S Commandsshow external-l3 ospf tenant vrf detail
show external-l3 ospf tenant vrf nodeshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000>
Description: Node(s) to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 325
S Commandsshow external-l3 ospf tenant vrf node
show external-l3 ospf tenant vrf node detailshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF(s) to filter on (Max Size 64)WORD
Node Range or Node Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)326
S Commandsshow external-l3 ospf tenant vrf node detail
show external-l3 route-mapshow external-l3 route-map
Description: Show command for external-l3 route-map
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 327
S Commandsshow external-l3 route-map
show external-l3 route-map detailshow external-l3 route-map detail
Description: Route-map in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)328
S Commandsshow external-l3 route-map detail
show external-l3 route-map nameshow external-l3 route-map name <l3out name>
Description: Route-map name to filter on
Syntax:
Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map name <l3out name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 329
S Commandsshow external-l3 route-map name
show external-l3 route-map name detailshow external-l3 route-map name <l3out name> detail
Description: Route-map in detail with operational status
Syntax:
Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map name <l3out name> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)330
S Commandsshow external-l3 route-map name detail
show external-l3 route-map tenantshow external-l3 route-map tenant <WORD>
Description: tenant to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 331
S Commandsshow external-l3 route-map tenant
show external-l3 route-map tenant detailshow external-l3 route-map tenant <WORD> detail
Description: Route-map in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)332
S Commandsshow external-l3 route-map tenant detail
show external-l3 route-map tenant vrfshow external-l3 route-map tenant <WORD> vrf WORD
Description: vrf to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 333
S Commandsshow external-l3 route-map tenant vrf
show external-l3 route-map tenant vrf detailshow external-l3 route-map tenant <WORD> vrf WORD detail
Description: Route-map in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)334
S Commandsshow external-l3 route-map tenant vrf detail
show external-l3 route-map tenant vrf nodeshow external-l3 route-map tenant <WORD> vrf WORD node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 335
S Commandsshow external-l3 route-map tenant vrf node
show external-l3 route-map tenant vrf node detailshow external-l3 route-map tenant <WORD> vrf WORD node detail
Description: Route-map in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)336
S Commandsshow external-l3 route-map tenant vrf node detail
show external-l3 static-routeshow external-l3 static-route
Description: Show command for external-l3 static routes
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 337
S Commandsshow external-l3 static-route
show external-l3 static-route detailshow external-l3 static-route detail
Description: static-route in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)338
S Commandsshow external-l3 static-route detail
show external-l3 static-route nodeshow external-l3 static-route node
Description: node to filter on
Syntax:
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 339
S Commandsshow external-l3 static-route node
show external-l3 static-route node detailshow external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)340
S Commandsshow external-l3 static-route node detail
show external-l3 static-route tenantshow external-l3 static-route tenant <WORD>
Description: tenant to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 341
S Commandsshow external-l3 static-route tenant
show external-l3 static-route tenant detailshow external-l3 static-route tenant <WORD> detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)342
S Commandsshow external-l3 static-route tenant detail
show external-l3 static-route tenant vrfshow external-l3 static-route tenant <WORD> vrf WORD
Description: vrf to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 343
S Commandsshow external-l3 static-route tenant vrf
show external-l3 static-route tenant vrf detailshow external-l3 static-route tenant <WORD> vrf WORD detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)344
S Commandsshow external-l3 static-route tenant vrf detail
show external-l3 static-route tenant vrf nodeshow external-l3 static-route tenant <WORD> vrf WORD node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 345
S Commandsshow external-l3 static-route tenant vrf node
show external-l3 static-route tenant vrf node detailshow external-l3 static-route tenant <WORD> vrf WORD node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)346
S Commandsshow external-l3 static-route tenant vrf node detail
show fabric-recovery statusshow fabric-recovery status
Description: Show fabric recovery status
Command Mode: exec : Exec Mode
Command Path:
# show fabric-recovery status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 347
S Commandsshow fabric-recovery status
show faultsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show fault information
Syntax:
(Optional) Historical informationhistory
(Optional) Fault code<fault-code>
(Optional) Fault ID<fault-ID>
(Optional) Acknowledgment status<yes/no>
(Optional) Lifecycle state<lc-state>
(Optional) Severity<severity-value>
(Optional) Minimum severity<severity-value>
(Optional) Type<fault-type>
(Optional) Cause<fault-value>
(Optional) Fault activity in time interval. Number range from=1 to=59last-minutes <num-minutes>
(Optional) Fault activity in time interval. Number range from=1 to=23last-hours <num-hours>
(Optional) Fault activity in time interval. Number range from=1 to=999last-days <num-days>
(Optional) Fault activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Fault activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Detailed faults informationdetail
command scope<scope>
Command Mode: exec : Exec Mode
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)348
S Commandsshow faults
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-timestart-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]<scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 349
S Commandsshow faults
show faults controllershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)350
S Commandsshow faults controller
show faults controller detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Description: Detailed controller information
Syntax:
(Optional) Optional Serial numbernode-id
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id<node-id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 351
S Commandsshow faults controller detail
show faults l4l7-clustershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]
Description: Show L4 L7 Device information
Syntax:
(Optional) Name of TenantTenant Name
(Optional) Name of DeviceDevice Cluster Name
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant<Tenant Name>] [cluster <Device Cluster Name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)352
S Commandsshow faults l4l7-cluster
show faults l4l7-graphshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]
Description: Show L4 L7 Graph information
Syntax:
(Optional) Name of Tenant<Tenant Name>
(Optional) Name of Graph<Graph Name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant<Tenant Name>] [graph <Graph Name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 353
S Commandsshow faults l4l7-graph
show faults leafshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Description: Show command for leaf
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)354
S Commandsshow faults leaf
show faults leaf fexshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>
Description: Show extended chassis information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 355
S Commandsshow faults leaf fex
show faults leaf fex moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum> module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)356
S Commandsshow faults leaf fex module
show faults leaf interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 357
S Commandsshow faults leaf interface ethernet
show faults leaf interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacel3instance <l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)358
S Commandsshow faults leaf interface l3instance
show faults leaf interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacemgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 359
S Commandsshow faults leaf interface mgmt
show faults leaf interface portchannelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>
Description: Port channel interface
Syntax:
Leaf id<leafId>
<Port channel number><portChan>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceportchannel <portChan>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)360
S Commandsshow faults leaf interface portchannel
show faults leaf interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacetunnel <tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 361
S Commandsshow faults leaf interface tunnel
show faults leaf inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorychassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)362
S Commandsshow faults leaf inventory chassis
show faults leaf inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventoryfans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 363
S Commandsshow faults leaf inventory fans
show faults leaf inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)364
S Commandsshow faults leaf inventory module
show faults leaf inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> fabricport <fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 365
S Commandsshow faults leaf inventory module fabricport
show faults leaf inventory module leafportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show information for leaf port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the leaf port number<leafPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> leafport <leafPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)366
S Commandsshow faults leaf inventory module leafport
show faults leaf inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 367
S Commandsshow faults leaf inventory powersupply
show faults leaf inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorysupervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)368
S Commandsshow faults leaf inventory supervisor
show faults leaf protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol<protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 369
S Commandsshow faults leaf protocol
show faults leaf vpcshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>
Description: Virtual port channel information
Syntax:
Leaf id<leafId>
pls enter virtual port channel number<vpcPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc<vpcPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)370
S Commandsshow faults leaf vpc
show faults leaf vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf<vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 371
S Commandsshow faults leaf vrf
show faults microsoft domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain
Description: Show Microsoft domain information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)372
S Commandsshow faults microsoft domain
show faults microsoft domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>
Description:Microsoft domain name
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 373
S Commandsshow faults microsoft domain name
show faults microsoft domain name hypervshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>
Description: Show Microsoft Hypervisor information
Syntax:
Microsoft domain nameWORD
HyperV hostnameWORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> hyperv <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)374
S Commandsshow faults microsoft domain name hyperv
show faults microsoft domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group
Description: Show Microsoft port group information
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> port-group
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 375
S Commandsshow faults microsoft domain name port-group
show faults microsoft domain name scvmmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>
Description: Show Microsoft SCVMM information
Syntax:
Microsoft domain nameWORD
SCVMM hostname or IP<hostname|ip>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> scvmm <hostname|ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)376
S Commandsshow faults microsoft domain name scvmm
show faults microsoft domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm
Description: Show Microsoft VM information
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 377
S Commandsshow faults microsoft domain name vm
show faults microsoft domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>
Description: Show detailed Microsoft VM information
Syntax:
Microsoft domain nameWORD
VM NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm name <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)378
S Commandsshow faults microsoft domain name vm name
show faults spineshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Description: Show command for spine
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 379
S Commandsshow faults spine
show faults spine interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfaceethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)380
S Commandsshow faults spine interface ethernet
show faults spine interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacel3instance <l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 381
S Commandsshow faults spine interface l3instance
show faults spine interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacemgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)382
S Commandsshow faults spine interface mgmt
show faults spine interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacetunnel <tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 383
S Commandsshow faults spine interface tunnel
show faults spine inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorychassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)384
S Commandsshow faults spine inventory chassis
show faults spine inventory fabricshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>
Description: Show information for fabric module
Syntax:
Leaf id<leafId>
pls enter the fabric module number<fcMod>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfabric <fcMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 385
S Commandsshow faults spine inventory fabric
show faults spine inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)386
S Commandsshow faults spine inventory fans
show faults spine inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 387
S Commandsshow faults spine inventory module
show faults spine inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot> fabricport <fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)388
S Commandsshow faults spine inventory module fabricport
show faults spine inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 389
S Commandsshow faults spine inventory powersupply
show faults spine inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysupervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)390
S Commandsshow faults spine inventory supervisor
show faults spine inventory systemshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>
Description: Show information for system module
Syntax:
Leaf id<leafId>
pls enter the system module number<sysMod>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysystem <sysMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 391
S Commandsshow faults spine inventory system
show faults spine protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol<protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)392
S Commandsshow faults spine protocol
show faults spine vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf<vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 393
S Commandsshow faults spine vrf
show faults tenantshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)394
S Commandsshow faults tenant
show faults tenant applicationshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 395
S Commandsshow faults tenant application
show faults tenant application epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)396
S Commandsshow faults tenant application epg
show faults tenant bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 397
S Commandsshow faults tenant bridge-domain
show faults tenant bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)398
S Commandsshow faults tenant bridge-domain detail
show faults tenant interface bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 399
S Commandsshow faults tenant interface bridge-domain
show faults tenant interface bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)400
S Commandsshow faults tenant interface bridge-domain detail
show faults tenant multicast-route-mapsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDmulticast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 401
S Commandsshow faults tenant multicast-route-maps
show faults tenant vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)402
S Commandsshow faults tenant vrf
show faults tenant vrf acllog l2show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 403
S Commandsshow faults tenant vrf acllog l2
show faults tenant vrf acllog l3show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)404
S Commandsshow faults tenant vrf acllog l3
[severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto<proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 405
S Commandsshow faults tenant vrf acllog l3
show faults tenant vrf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDdetail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)406
S Commandsshow faults tenant vrf detail
show faults tenant vrf external-l3 bgpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 407
S Commandsshow faults tenant vrf external-l3 bgp
show faults tenant vrf external-l3 bgp nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)408
S Commandsshow faults tenant vrf external-l3 bgp node
show faults tenant vrf external-l3 eigrpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 409
S Commandsshow faults tenant vrf external-l3 eigrp
show faults tenant vrf external-l3 eigrp detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)410
S Commandsshow faults tenant vrf external-l3 eigrp detail
show faults tenant vrf external-l3 epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 411
S Commandsshow faults tenant vrf external-l3 epg
show faults tenant vrf external-l3 epg detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)412
S Commandsshow faults tenant vrf external-l3 epg detail
show faults tenant vrf external-l3 epg nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 413
S Commandsshow faults tenant vrf external-l3 epg name
show faults tenant vrf external-l3 epg name detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)414
S Commandsshow faults tenant vrf external-l3 epg name detail
show faults tenant vrf external-l3 interfacesshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 415
S Commandsshow faults tenant vrf external-l3 interfaces
show faults tenant vrf external-l3 interfaces detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)416
S Commandsshow faults tenant vrf external-l3 interfaces detail
show faults tenant vrf external-l3 ospfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 417
S Commandsshow faults tenant vrf external-l3 ospf
show faults tenant vrf external-l3 ospf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)418
S Commandsshow faults tenant vrf external-l3 ospf detail
show faults tenant vrf external-l3 static-routeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 419
S Commandsshow faults tenant vrf external-l3 static-route
show faults tenant vrf external-l3 static-route detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)420
S Commandsshow faults tenant vrf external-l3 static-route detail
show faults tenant vrf external-l3 static-route nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 421
S Commandsshow faults tenant vrf external-l3 static-route node
show faults tenant vrf external-l3 static-route node detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)422
S Commandsshow faults tenant vrf external-l3 static-route node detail
show faults tenant vrf multicastshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDmulticast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 423
S Commandsshow faults tenant vrf multicast
show faults vmware domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain
Description: Show VMware domain information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)424
S Commandsshow faults vmware domain
show faults vmware domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>
Description: VMware domain name
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 425
S Commandsshow faults vmware domain name
show faults vmware domain name epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg
Description: Show VMware domain EPG details
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> epg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)426
S Commandsshow faults vmware domain name epg
show faults vmware domain name esxshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>
Description: Show VMware ESX information
Syntax:
VMware domain name<name>
ESX IP<esx-ip>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> esx <esx-ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 427
S Commandsshow faults vmware domain name esx
show faults vmware domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group
Description: Show VMware port group information
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> port-group
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)428
S Commandsshow faults vmware domain name port-group
show faults vmware domain name trunk-portgroupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> trunk-portgroup [name <name>]
Description: Show VMware domain trunk portgroup details
Syntax:
VMware domain name<name>
(Optional) trunk portgroup name<name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> trunk-portgroup [name <name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 429
S Commandsshow faults vmware domain name trunk-portgroup
show faults vmware domain name vcentershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>
Description: VMware vCenter ip or hostname
Syntax:
VMware domain name<name>
vCenter hostname or IP<hostname|ip>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vcenter <hostname|ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)430
S Commandsshow faults vmware domain name vcenter
show faults vmware domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm
Description: Show VMware VM information
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 431
S Commandsshow faults vmware domain name vm
show faults vmware domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>
Description: Show detailed VMware VM information
Syntax:
VMware domain name<name>
VM Name<vm-name>
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm name <vm-name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)432
S Commandsshow faults vmware domain name vm name
show fipsshow fips <status>
Description: Show FIPS information
Syntax:
Show FIPS informationstatus
Command Mode: exec : Exec Mode
Command Path:
# show fips <status>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 433
S Commandsshow fips
show firmware repositoryshow firmware repository
Description: Show firmware images present in repository
Command Mode: exec : Exec Mode
Command Path:
# show firmware repository
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)434
S Commandsshow firmware repository
show firmware repository detailshow firmware repository detail
Description: Detailed repository information
Command Mode: exec : Exec Mode
Command Path:
# show firmware repository detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 435
S Commandsshow firmware repository detail
show firmware upgrade statusshow firmware upgrade status
Description: Upgrade status of all controllers and switches
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)436
S Commandsshow firmware upgrade status
show firmware upgrade status controller-groupshow firmware upgrade status controller-group
Description: Controller-group upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status controller-group
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 437
S Commandsshow firmware upgrade status controller-group
show firmware upgrade status controller-group detailshow firmware upgrade status controller-group detail
Description: Detailed upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status controller-group detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)438
S Commandsshow firmware upgrade status controller-group detail
show firmware upgrade status detailshow firmware upgrade status detail
Description: Detailed upgrade status information
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 439
S Commandsshow firmware upgrade status detail
show firmware upgrade status switch-groupshow firmware upgrade status switch-group <WORD>
Description: Switch-group upgrade status
Syntax:
switch-group name (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status switch-group <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)440
S Commandsshow firmware upgrade status switch-group
show firmware upgrade status switch-group detailshow firmware upgrade status switch-group <WORD> detail
Description: Detailed upgrade status
Syntax:
switch-group name (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status switch-group <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 441
S Commandsshow firmware upgrade status switch-group detail
show flow exportershow flow exporter
Description: Show Netflow exporter information
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)442
S Commandsshow flow exporter
show flow exporter infrashow flow exporter infra WORD [detail]
Description: Show flow exporter infra information
Syntax:
Exporter NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter infra WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 443
S Commandsshow flow exporter infra
show flow exporter tenantshow flow exporter tenant <WORD> WORD [detail]
Description: Show flow exporter tenant information
Syntax:
Optional tenant nameWORD
Exporter NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter tenant <WORD> WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)444
S Commandsshow flow exporter tenant
show flow monitorshow flow monitor
Description: Show Netflow Monitor Information
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 445
S Commandsshow flow monitor
show flow monitor infrashow flow monitor infra WORD [detail]
Description: Show Netflow Monitor Information for infra
Syntax:
Optional Monitor NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor infra WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)446
S Commandsshow flow monitor infra
show flow monitor tenantshow flow monitor tenant <WORD> WORD [detail]
Description: Show Netflow Monitor Information for the specified tenant
Syntax:
Specify tenant nameWORD
Optional Monitor NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor tenant <WORD> WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 447
S Commandsshow flow monitor tenant
show flow node-policyshow flow node-policy [name <WORD>]
Description: Show Netflow Node Policy Information
Syntax:
(Optional) Optional Node Policy NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show flow node-policy [name <WORD>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)448
S Commandsshow flow node-policy
show flow node-policy detailshow flow node-policy [name <WORD>] detail
Description: Show Netflow Node Policy Detailed Information
Syntax:
(Optional) Optional Node Policy NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show flow node-policy [name <WORD>] detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 449
S Commandsshow flow node-policy detail
show flow recordshow flow record
Description: Show Netflow record information
Command Mode: exec : Exec Mode
Command Path:
# show flow record
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)450
S Commandsshow flow record
show flow record infrashow flow record infra WORD [detail]
Description: Show flow record infra information
Syntax:
Record NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow record infra WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 451
S Commandsshow flow record infra
show flow record tenantshow flow record tenant [record-name <recordName>] <tenantName> WORD [detail]
Description: Show flow record tenant information
Syntax:
(Optional) Optional record namerecordName
Optional tenant nametenantName
Record NameWORD
(Optional) detaildetail
Command Mode: exec : Exec Mode
Command Path:
# show flow record tenant [record-name <recordName>] <tenantName> WORD [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)452
S Commandsshow flow record tenant
show flow vm-exportershow flow vm-exporter WORD
Description: Show NetFlow Exporter information for VM Networking
Syntax:
NetFlow Exporter NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show flow vm-exporter WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 453
S Commandsshow flow vm-exporter
show healthshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>
Description: Show health score information
Syntax:
(Optional) Historical informationhistory
(Optional) Minimum change in health score percentage. Number rangefrom=-100 to=9999
min-change <percentage change>
(Optional) Maximum health score. Number range from=0 to=100max-hs <maximum health-score>
(Optional) Health activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Health activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>
command scope<scope>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)454
S Commandsshow health
show health leafshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>
Description: Show command for leaf
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 455
S Commandsshow health leaf
show health leaf fexshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>
Description: Show extended chassis information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)456
S Commandsshow health leaf fex
show health leaf fex moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 457
S Commandsshow health leaf fex module
show health leaf interface ethernetshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet<phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)458
S Commandsshow health leaf interface ethernet
show health leaf interface l3instanceshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance<l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 459
S Commandsshow health leaf interface l3instance
show health leaf interface mgmtshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt<mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)460
S Commandsshow health leaf interface mgmt
show health leaf interface portchannelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>
Description: Port channel interface
Syntax:
Leaf id<leafId>
<Port channel number><portChan>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interfaceportchannel <portChan>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 461
S Commandsshow health leaf interface portchannel
show health leaf interface tunnelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel<tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)462
S Commandsshow health leaf interface tunnel
show health leaf inventory chassisshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 463
S Commandsshow health leaf inventory chassis
show health leaf inventory fansshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans<ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)464
S Commandsshow health leaf inventory fans
show health leaf inventory moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 465
S Commandsshow health leaf inventory module
show health leaf inventory module fabricportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> fabricport <fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)466
S Commandsshow health leaf inventory module fabricport
show health leaf inventory module leafportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show information for leaf port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the leaf port number<leafPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> leafport <leafPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 467
S Commandsshow health leaf inventory module leafport
show health leaf inventory powersupplyshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)468
S Commandsshow health leaf inventory powersupply
show health leaf inventory supervisorshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor<supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 469
S Commandsshow health leaf inventory supervisor
show health leaf protocolshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)470
S Commandsshow health leaf protocol
show health leaf vpcshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>
Description: Virtual port channel information
Syntax:
Leaf id<leafId>
pls enter virtual port channel number<vpcPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 471
S Commandsshow health leaf vpc
show health leaf vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)472
S Commandsshow health leaf vrf
show health spineshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>
Description: Show command for spine
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 473
S Commandsshow health spine
show health spine interface ethernetshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet<phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)474
S Commandsshow health spine interface ethernet
show health spine interface l3instanceshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface l3instance <l3Inst>
Description: L3 instance
Syntax:
Leaf id<leafId>
<L3 instance number><l3Inst>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interfacel3instance <l3Inst>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 475
S Commandsshow health spine interface l3instance
show health spine interface mgmtshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt<mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)476
S Commandsshow health spine interface mgmt
show health spine interface tunnelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel <tunnelPort>
Description: Tunnel Interface
Syntax:
Leaf id<leafId>
<Tunnel interface number><tunnelPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel<tunnelPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 477
S Commandsshow health spine interface tunnel
show health spine inventory chassisshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)478
S Commandsshow health spine inventory chassis
show health spine inventory fabricshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric <fcMod>
Description: Show information for fabric module
Syntax:
Leaf id<leafId>
pls enter the fabric module number<fcMod>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric<fcMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 479
S Commandsshow health spine inventory fabric
show health spine inventory fansshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans<ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)480
S Commandsshow health spine inventory fans
show health spine inventory moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module<lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 481
S Commandsshow health spine inventory module
show health spine inventory module fabricportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for fabric port
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
pls enter the fabric port number<fabPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module<lcSlot> fabricport <fabPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)482
S Commandsshow health spine inventory module fabricport
show health spine inventory powersupplyshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 483
S Commandsshow health spine inventory powersupply
show health spine inventory supervisorshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventorysupervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)484
S Commandsshow health spine inventory supervisor
show health spine inventory systemshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system <sysMod>
Description: Show information for system module
Syntax:
Leaf id<leafId>
pls enter the system module number<sysMod>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system<sysMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 485
S Commandsshow health spine inventory system
show health spine protocolshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>
Description: Show command for protocol
Syntax:
Leaf id<leafId>
Protocol name<protName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)486
S Commandsshow health spine protocol
show health spine vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>
Description: Vrf information
Syntax:
Leaf id<leafId>
pls enter vrf name<vrfPort>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 487
S Commandsshow health spine vrf
show health tenantshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)488
S Commandsshow health tenant
show health tenant applicationshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 489
S Commandsshow health tenant application
show health tenant application epgshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORDepg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)490
S Commandsshow health tenant application epg
show health tenant bridge-domainshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 491
S Commandsshow health tenant bridge-domain
show health tenant bridge-domain detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORDdetail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)492
S Commandsshow health tenant bridge-domain detail
show health tenant interface bridge-domainshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interfacebridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 493
S Commandsshow health tenant interface bridge-domain
show health tenant interface bridge-domain detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interfacebridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)494
S Commandsshow health tenant interface bridge-domain detail
show health tenant multicast-route-mapsshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD multicast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 495
S Commandsshow health tenant multicast-route-maps
show health tenant vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)496
S Commandsshow health tenant vrf
show health tenant vrf acllog l2show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog<permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 497
S Commandsshow health tenant vrf acllog l2
show health tenant vrf acllog l3show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog<permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)498
S Commandsshow health tenant vrf acllog l3
srcport <srcport> dstport <dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 499
S Commandsshow health tenant vrf acllog l3
show health tenant vrf detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)500
S Commandsshow health tenant vrf detail
show health tenant vrf external-l3 bgpshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 501
S Commandsshow health tenant vrf external-l3 bgp
show health tenant vrf external-l3 bgp nodeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3bgp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)502
S Commandsshow health tenant vrf external-l3 bgp node
show health tenant vrf external-l3 eigrpshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 503
S Commandsshow health tenant vrf external-l3 eigrp
show health tenant vrf external-l3 eigrp detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)504
S Commandsshow health tenant vrf external-l3 eigrp detail
show health tenant vrf external-l3 epgshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 505
S Commandsshow health tenant vrf external-l3 epg
show health tenant vrf external-l3 epg detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)506
S Commandsshow health tenant vrf external-l3 epg detail
show health tenant vrf external-l3 epg nameshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 507
S Commandsshow health tenant vrf external-l3 epg name
show health tenant vrf external-l3 epg name detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)508
S Commandsshow health tenant vrf external-l3 epg name detail
show health tenant vrf external-l3 interfacesshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 509
S Commandsshow health tenant vrf external-l3 interfaces
show health tenant vrf external-l3 interfaces detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)510
S Commandsshow health tenant vrf external-l3 interfaces detail
show health tenant vrf external-l3 ospfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 511
S Commandsshow health tenant vrf external-l3 ospf
show health tenant vrf external-l3 ospf detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)512
S Commandsshow health tenant vrf external-l3 ospf detail
show health tenant vrf external-l3 static-routeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 513
S Commandsshow health tenant vrf external-l3 static-route
show health tenant vrf external-l3 static-route detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)514
S Commandsshow health tenant vrf external-l3 static-route detail
show health tenant vrf external-l3 static-route nodeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 515
S Commandsshow health tenant vrf external-l3 static-route node
show health tenant vrf external-l3 static-route node detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)516
S Commandsshow health tenant vrf external-l3 static-route node detail
show health tenant vrf multicastshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD multicast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 517
S Commandsshow health tenant vrf multicast
show inband-mgmtshow inband-mgmt
Description: Show inband mgmt epgs on all the nodes
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)518
S Commandsshow inband-mgmt
show inband-mgmt controllershow inband-mgmt controller <controller-id> [epg <WORD>]
Description: show inband mgmt epgs on the controller
Syntax:
<controller-id>
(Optional) Epg Name of conusmer epgWORD
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt controller <controller-id> [epg <WORD>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 519
S Commandsshow inband-mgmt controller
show inband-mgmt switchshow inband-mgmt switch <switch-id> [epg <WORD>]
Description: Show inband mgmt epgs on the node
Syntax:
<switch-id>
(Optional) Epg NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt switch <switch-id> [epg <WORD>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)520
S Commandsshow inband-mgmt switch
show interface bridge-domainshow interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 521
S Commandsshow interface bridge-domain
show interface bridge-domain detailshow interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)522
S Commandsshow interface bridge-domain detail
show ip interface bridge-domainshow ip interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show ip interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 523
S Commandsshow ip interface bridge-domain
show ipv6 interface bridge-domainshow ipv6 interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show ipv6 interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)524
S Commandsshow ipv6 interface bridge-domain
show l4l7-clustershow l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]
Description: Show L4 L7 Device information
Syntax:
(Optional) Name of TenantTenant Name
(Optional) Name of DeviceDevice Cluster Name
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 525
S Commandsshow l4l7-cluster
show l4l7-graphshow l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]
Description: Show L4 L7 Graph information
Syntax:
(Optional) Name of Tenant<Tenant Name>
(Optional) Name of Graph<Graph Name>
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)526
S Commandsshow l4l7-graph
show l4l7-packageshow l4l7-package
Description: Show L4-L7 package information
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-package
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 527
S Commandsshow l4l7-package
show ldap-servershow ldap-server
Description: Show LDAP server information
Command Mode: exec : Exec Mode
Command Path:
# show ldap-server
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)528
S Commandsshow ldap-server
show locator-ledshow locator-led status
Description: Show command for locator-led
Syntax:
locator-led statusstatus
Command Mode: exec : Exec Mode
Command Path:
# show locator-led status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 529
S Commandsshow locator-led
show locator-led status leafshow locator-led status leaf
Description: Leaf to filter on
Syntax:
locator-led statusstatus
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show locator-led status leaf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)530
S Commandsshow locator-led status leaf
show microsoft domainshow microsoft domain
Description: Show Microsoft domain information
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 531
S Commandsshow microsoft domain
show microsoft domain nameshow microsoft domain name <WORD>
Description:Microsoft domain name
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)532
S Commandsshow microsoft domain name
show microsoft domain name hypervshow microsoft domain name <WORD> hyperv <WORD>
Description: Show Microsoft Hypervisor information
Syntax:
Microsoft domain nameWORD
HyperV hostnameWORD
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> hyperv <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 533
S Commandsshow microsoft domain name hyperv
show microsoft domain name port-groupshow microsoft domain name <WORD> port-group
Description: Show Microsoft port group information
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> port-group
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)534
S Commandsshow microsoft domain name port-group
show microsoft domain name scvmmshow microsoft domain name <WORD> scvmm <hostname|ip>
Description: Show Microsoft SCVMM information
Syntax:
Microsoft domain nameWORD
SCVMM hostname or IP<hostname|ip>
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> scvmm <hostname|ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 535
S Commandsshow microsoft domain name scvmm
show microsoft domain name vmshow microsoft domain name <WORD> vm
Description: Show Microsoft VM information
Syntax:
Microsoft domain nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> vm
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)536
S Commandsshow microsoft domain name vm
show microsoft domain name vm nameshow microsoft domain name <WORD> vm name <WORD>
Description: Show detailed Microsoft VM information
Syntax:
Microsoft domain nameWORD
VM NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> vm name <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 537
S Commandsshow microsoft domain name vm name
show microsoft vmshow microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]
Description: Show Microsoft VM information
Syntax:
(Optional) Specify a VM nameWORD
(Optional) Specify a VM IP addressA.B.C.D
(Optional) Specify a VM MAC addressAA:BB:CC:DD:EE:FF
Command Mode: exec : Exec Mode
Command Path:
# show microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)538
S Commandsshow microsoft vm
show monitor accessshow monitor access session session_name
Description: Show monitor session for access interfaces
Syntax:
sessionsession
session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show monitor access session session_name
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 539
S Commandsshow monitor access
show monitor fabricshow monitor fabric session session_name
Description: Show monitor session for fabric interfaces
Syntax:
sessionsession
session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show monitor fabric session session_name
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)540
S Commandsshow monitor fabric
show monitor tenantshow monitor tenant <tenant_name> session session_name
Description: Show monitor session for tenant
Syntax:
tenanttenant_name
sessionsession
session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show monitor tenant <tenant_name> session session_name
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 541
S Commandsshow monitor tenant
show monitor virtualshow monitor virtual session WORD
Description: Show monitor session for virtual switches
Syntax:
sessionsession
Session nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show monitor virtual session WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)542
S Commandsshow monitor virtual
show name-alias tenantshow name-alias tenant WORD
Description: Show corresponding tenants for Alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 543
S Commandsshow name-alias tenant
show name-alias tenant aclshow name-alias tenant WORD acl WORD
Description: Show Acl Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the Acl Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD acl WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)544
S Commandsshow name-alias tenant acl
show name-alias tenant applicationshow name-alias tenant WORD application WORD
Description: Show Application Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the application Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 545
S Commandsshow name-alias tenant application
show name-alias tenant application epgshow name-alias tenant WORD application WORD epg WORD
Description: Show EndPoint Group Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the application Alias to filter on (Max Size 64)WORD
Name of the epg Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD application WORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)546
S Commandsshow name-alias tenant application epg
show name-alias tenant bridge-domainshow name-alias tenant WORD bridge-domain WORD
Description: Show Bridge-Domain Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the bridge-domain Alias to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 547
S Commandsshow name-alias tenant bridge-domain
show name-alias tenant contractshow name-alias tenant WORD contract WORD
Description: Show Contract Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the contract Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD contract WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)548
S Commandsshow name-alias tenant contract
show name-alias tenant contract subjectshow name-alias tenant WORD contract WORD subject WORD
Description: Show Subject Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the contract Alias to filter on (Max Size 64)WORD
Name of the Subject Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD contract WORD subject WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 549
S Commandsshow name-alias tenant contract subject
show name-alias tenant l3outshow name-alias tenant WORD l3out WORD
Description: Show L3out Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the L3out Alias to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD l3out WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)550
S Commandsshow name-alias tenant l3out
show name-alias tenant vrfshow name-alias tenant WORD vrf WORD
Description: Show Vrf Name for alias
Syntax:
Name of the tenant Alias to filter on (Max Size 63)WORD
Name of the vrf Alias to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 551
S Commandsshow name-alias tenant vrf
show ntpqshow ntpq
Description: Show ntpq information
Command Mode: exec : Exec Mode
Command Path:
# show ntpq
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)552
S Commandsshow ntpq
show oob-mgmtshow oob-mgmt
Description: Show Out of band Information
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 553
S Commandsshow oob-mgmt
show oob-mgmt controllershow oob-mgmt controller <controller-id> [epg <WORD>]
Description: Show oob mgmt epgs on the controller, enter one
Syntax:
<controller-id>
(Optional) Epg Name of conusmer epgWORD
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt controller <controller-id> [epg <WORD>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)554
S Commandsshow oob-mgmt controller
show oob-mgmt switchshow oob-mgmt switch <switch-id> [epg <WORD>]
Description: Show oob mgmt epgs on the node, enter one
Syntax:
<switch-id>
(Optional) Epg Name of conusmer epgWORD
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt switch <switch-id> [epg <WORD>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 555
S Commandsshow oob-mgmt switch
show policy-mapshow policy-map
Description: Show policy maps
Command Mode: exec : Exec Mode
Command Path:
# show policy-map
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)556
S Commandsshow policy-map
show policy-map type data-planeshow policy-map type data-plane infra WORD
Description: Data-plane type policy-map(s)
Syntax:
Global data-plane policy-map(s)infra
data-plane type policy-map(s) (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show policy-map type data-plane infra WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 557
S Commandsshow policy-map type data-plane
show policy-map type qosshow policy-map type qos WORD
Description: QOS type policy-map(s)
Syntax:
QOS type policy-map(s) (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show policy-map type qos WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)558
S Commandsshow policy-map type qos
show port-channel leafshow port-channel leaf WORD <port-channel-list>
Description: Show leaf port-channel info
Syntax:
Leaf Range or Leaf Name ListWORD
port channel names<port-channel-list>
Command Mode: exec : Exec Mode
Command Path:
# show port-channel leaf WORD <port-channel-list>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 559
S Commandsshow port-channel leaf
show port-channel mapshow port-channel map <port-channel-list>
Description: Show port-channel mapping
Syntax:
port channel names<port-channel-list>
Command Mode: exec : Exec Mode
Command Path:
# show port-channel map <port-channel-list>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)560
S Commandsshow port-channel map
show port-channel map leafshow port-channel map <port-channel-list> leaf WORD [fex <101-164>]
Description: Leaf
Syntax:
port channel names<port-channel-list>
Leaf Range or Leaf Name ListWORD
(Optional) Fex ID<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show port-channel map <port-channel-list> leaf WORD [fex <101-164>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 561
S Commandsshow port-channel map leaf
show radius-servershow radius-server
Description: Show RADIUS server information
Command Mode: exec : Exec Mode
Command Path:
# show radius-server
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)562
S Commandsshow radius-server
show resourceshow resource conflict encap-vlan
Description: Show resource information
Syntax:
show resource conflicts in APICconflict
show resource conflicts of encap-vlan in APICencap-vlan
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 563
S Commandsshow resource
show resource conflict encap-vlan epgshow resource conflict encap-vlan epg <WORD>
Description: Epg Name
Syntax:
show resource conflicts in APICconflict
show resource conflicts of encap-vlan in APICencap-vlan
Epg NameWORD
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)564
S Commandsshow resource conflict encap-vlan epg
show resource conflict encap-vlan epg nodeshow resource conflict encap-vlan epg <WORD> node <101-4000>
Description: Node ID
Syntax:
show resource conflicts in APICconflict
show resource conflicts of encap-vlan in APICencap-vlan
Epg NameWORD
Leaf ID<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan epg <WORD> node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 565
S Commandsshow resource conflict encap-vlan epg node
show roleshow role
Description: Show information about AAA Roles
Command Mode: exec : Exec Mode
Command Path:
# show role
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)566
S Commandsshow role
show running-configshow running-config [all] <scope>
Description: Show running configuration
Syntax:
(Optional) Show running-config with defaultsall
command scope<scope>
Command Mode: exec : Exec Mode
Command Path:
# show running-config [all] <scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 567
S Commandsshow running-config
show sessionsshow sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show session-log information
Syntax:
(Optional) Log ID<log-id>
(Optional) Object action indicatoraction<action-type>
(Optional) Name of user<user-name>
(Optional) Logs created in time interval. Number range from=1 to=59<num-minutes>
(Optional) Logs created in time interval. Number range from=1 to=23<num-hours>
(Optional) Logs created in time interval. Number range from=1 to=999<num-days>
(Optional) Logs created in time interval<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Logs created in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>
(Optional) Detailed session-log information. Displays the action triggerthat shows why a login occurred.
detail
command scope<scope>
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)568
S Commandsshow sessions
show sessions controllershow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]controller
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] controller
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 569
S Commandsshow sessions controller
show sessions controller detailshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]controller detail [id <node-id>]
Description: Detailed controller information
Syntax:
(Optional) Optional Serial numbernode-id
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] controller detail [id <node-id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)570
S Commandsshow sessions controller detail
show sessions leafshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]leaf <leafId>
Description: Show command for leaf
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] leaf <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 571
S Commandsshow sessions leaf
show sessions spineshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]spine <leafId>
Description: Show command for spine
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] spine <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)572
S Commandsshow sessions spine
show snapshot activeshow snapshot active job
Description: Show command for active snapshot job
Syntax:
View active snapshot jobjob
Command Mode: exec : Exec Mode
Command Path:
# show snapshot active job
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 573
S Commandsshow snapshot active
show snapshot filesshow snapshot files
Description: Show command for snapshot files
Command Mode: exec : Exec Mode
Command Path:
# show snapshot files
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)574
S Commandsshow snapshot files
show snapshot jobsshow snapshot jobs
Description: Show command for snapshot jobs
Command Mode: exec : Exec Mode
Command Path:
# show snapshot jobs
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 575
S Commandsshow snapshot jobs
show snmpshow snmp [policy <policy>]
Description: Show snmp policy information
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)576
S Commandsshow snmp
show snmp clientgroupsshow snmp [policy <policy>] clientgroups
Description: Show snmp client group policies
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] clientgroups
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 577
S Commandsshow snmp clientgroups
show snmp communityshow snmp [policy <policy>] community
Description: Show snmp community information
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] community
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)578
S Commandsshow snmp community
show snmp engineidshow snmp [policy <policy>] engineid
Description: Show snmp v3 engine-id
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] engineid
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 579
S Commandsshow snmp engineid
show snmp hostsshow snmp [policy <policy>] hosts
Description: Show snmp trap hosts
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] hosts
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)580
S Commandsshow snmp hosts
show snmp summaryshow snmp [policy <policy>] summary
Description: Show snmp summary
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] summary
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 581
S Commandsshow snmp summary
show snmp usersshow snmp [policy <policy>] users
Description: Show snmp v3 users
Syntax:
(Optional) SNMP policy namepolicy
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] users
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)582
S Commandsshow snmp users
show statsshow stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine
Description: Show statistics
Syntax:
Choose granularity valuegranularity
<granularity-value><granularity-value>
(Optional) historical stats informationhistory
(Optional) cumulative stats informationcumulative
command scopetenant
command scopeleaf
command scopespine
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 583
S Commandsshow stats
show stats granularity communication controllershow stats granularity <granularity-value> [history] [cumulative] communication controller node-id
Description: Show command for nginx web-requests
Syntax:
node-idnode-id
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] communication controllernode-id
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)584
S Commandsshow stats granularity communication controller
show stats granularity leafshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId>
Description: Show command for leaf
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 585
S Commandsshow stats granularity leaf
show stats granularity leaf fexshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum>
Description: Show extended chassis information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex<fexNum>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)586
S Commandsshow stats granularity leaf fex
show stats granularity leaf fex moduleshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
pls enter fex number<fexNum>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex<fexNum> module <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 587
S Commandsshow stats granularity leaf fex module
show stats granularity leaf interface ethernetshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfaceethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)588
S Commandsshow stats granularity leaf interface ethernet
show stats granularity leaf interface mgmtshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfacemgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 589
S Commandsshow stats granularity leaf interface mgmt
show stats granularity leaf interface portchannelshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface portchannel <portChan>
Description: Port channel interface
Syntax:
Leaf id<leafId>
<Port channel number><portChan>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfaceportchannel <portChan>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)590
S Commandsshow stats granularity leaf interface portchannel
show stats granularity leaf inventory chassisshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorychassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 591
S Commandsshow stats granularity leaf inventory chassis
show stats granularity leaf inventory fansshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventoryfans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)592
S Commandsshow stats granularity leaf inventory fans
show stats granularity leaf inventory powersupplyshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory powersupply <psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 593
S Commandsshow stats granularity leaf inventory powersupply
show stats granularity leaf inventory supervisorshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorysupervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)594
S Commandsshow stats granularity leaf inventory supervisor
show stats granularity spineshow stats granularity <granularity-value> [history] [cumulative] spine <leafId>
Description: Show command for spine
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 595
S Commandsshow stats granularity spine
show stats granularity spine interface ethernetshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface ethernet <phyInt>
Description: Ethernet IEEE 802.3z
Syntax:
Leaf id<leafId>
<slot or chassis-number/port or slot number><phyInt>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interfaceethernet <phyInt>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)596
S Commandsshow stats granularity spine interface ethernet
show stats granularity spine interface mgmtshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface mgmt <mgmtPort>
Description:Management interface
Syntax:
Leaf id<leafId>
<Management interface number><mgmtPort>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interfacemgmt <mgmtPort>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 597
S Commandsshow stats granularity spine interface mgmt
show stats granularity spine inventory chassisshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory chassis
Description: Show inventory chassis information
Syntax:
Leaf id<leafId>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorychassis
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)598
S Commandsshow stats granularity spine inventory chassis
show stats granularity spine inventory fabricshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fabric <fcMod>
Description: Show information for fabric module
Syntax:
Leaf id<leafId>
pls enter the fabric module number<fcMod>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventoryfabric <fcMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 599
S Commandsshow stats granularity spine inventory fabric
show stats granularity spine inventory fansshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fans <ftSlot>
Description: Show inventory fan information
Syntax:
Leaf id<leafId>
pls enter fan tray number<ftSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventoryfans <ftSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)600
S Commandsshow stats granularity spine inventory fans
show stats granularity spine inventory moduleshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory module <lcSlot>
Description: Show inventory module information
Syntax:
Leaf id<leafId>
please enter the module number<lcSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorymodule <lcSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 601
S Commandsshow stats granularity spine inventory module
show stats granularity spine inventory powersupplyshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory powersupply<psuSlot>
Description: Show inventory power supply information
Syntax:
Leaf id<leafId>
pls enter the powersupply number<psuSlot>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorypowersupply <psuSlot>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)602
S Commandsshow stats granularity spine inventory powersupply
show stats granularity spine inventory supervisorshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory supervisor <supMod>
Description: Show information for supervisor module
Syntax:
Leaf id<leafId>
pls enter the supervisor module number<supMod>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorysupervisor <supMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 603
S Commandsshow stats granularity spine inventory supervisor
show stats granularity spine inventory systemshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory system <sysMod>
Description: Show information for system module
Syntax:
Leaf id<leafId>
pls enter the system module number<sysMod>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorysystem <sysMod>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)604
S Commandsshow stats granularity spine inventory system
show stats granularity tenantshow stats granularity <granularity-value> [history] [cumulative] tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 605
S Commandsshow stats granularity tenant
show stats granularity tenant applicationshow stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD applicationWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)606
S Commandsshow stats granularity tenant application
show stats granularity tenant application epgshow stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD applicationWORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 607
S Commandsshow stats granularity tenant application epg
show stats granularity tenant dot1q-tunnelshow stats granularity <granularity-value> [history] [cumulative] tenant WORD dot1q-tunnel WORD
Description: Show Dot1q-tunnel Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the TnlEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dot1q-tunnelWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)608
S Commandsshow stats granularity tenant dot1q-tunnel
show stats granularity tenant multicast-route-mapsshow stats granularity <granularity-value> [history] [cumulative] tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORDmulticast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 609
S Commandsshow stats granularity tenant multicast-route-maps
show stats granularity tenant vrfshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)610
S Commandsshow stats granularity tenant vrf
show stats granularity tenant vrf acllog l2show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop>l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDacllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 611
S Commandsshow stats granularity tenant vrf acllog l2
show stats granularity tenant vrf acllog l3show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop>l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport>srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDacllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto<proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)612
S Commandsshow stats granularity tenant vrf acllog l3
show stats granularity tenant vrf detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDdetail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 613
S Commandsshow stats granularity tenant vrf detail
show stats granularity tenant vrf external-l3 bgpshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)614
S Commandsshow stats granularity tenant vrf external-l3 bgp
show stats granularity tenant vrf external-l3 bgp nodeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgpnode <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 bgp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 615
S Commandsshow stats granularity tenant vrf external-l3 bgp node
show stats granularity tenant vrf external-l3 eigrpshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)616
S Commandsshow stats granularity tenant vrf external-l3 eigrp
show stats granularity tenant vrf external-l3 eigrp detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrpdetail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 617
S Commandsshow stats granularity tenant vrf external-l3 eigrp detail
show stats granularity tenant vrf external-l3 epgshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)618
S Commandsshow stats granularity tenant vrf external-l3 epg
show stats granularity tenant vrf external-l3 epg detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 619
S Commandsshow stats granularity tenant vrf external-l3 epg detail
show stats granularity tenant vrf external-l3 epg nameshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> name <epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)620
S Commandsshow stats granularity tenant vrf external-l3 epg name
show stats granularity tenant vrf external-l3 epg name detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> name <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 621
S Commandsshow stats granularity tenant vrf external-l3 epg name detail
show stats granularity tenant vrf external-l3 interfacesshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)622
S Commandsshow stats granularity tenant vrf external-l3 interfaces
show stats granularity tenant vrf external-l3 interfaces detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfacesdetail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 623
S Commandsshow stats granularity tenant vrf external-l3 interfaces detail
show stats granularity tenant vrf external-l3 ospfshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)624
S Commandsshow stats granularity tenant vrf external-l3 ospf
show stats granularity tenant vrf external-l3 ospf detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospfdetail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 625
S Commandsshow stats granularity tenant vrf external-l3 ospf detail
show stats granularity tenant vrf external-l3 static-routeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)626
S Commandsshow stats granularity tenant vrf external-l3 static-route
show stats granularity tenant vrf external-l3 static-route detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 627
S Commandsshow stats granularity tenant vrf external-l3 static-route detail
show stats granularity tenant vrf external-l3 static-route nodeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)628
S Commandsshow stats granularity tenant vrf external-l3 static-route node
show stats granularity tenant vrf external-l3 static-route nodedetail
show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 629
S Commandsshow stats granularity tenant vrf external-l3 static-route node detail
show stats granularity tenant vrf multicastshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDmulticast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)630
S Commandsshow stats granularity tenant vrf multicast
show switchshow switch
Description: Show switch information
Command Mode: exec : Exec Mode
Command Path:
# show switch
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 631
S Commandsshow switch
show switch detailshow switch detail [id <switch-id>]
Description: Show switch detailed information
Syntax:
(Optional) Optional switch id. Number range from=0to=9223372036854775807
switch-id
Command Mode: exec : Exec Mode
Command Path:
# show switch detail [id <switch-id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)632
S Commandsshow switch detail
show tacacs-servershow tacacs-server
Description: Show tacacs server information
Command Mode: exec : Exec Mode
Command Path:
# show tacacs-server
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 633
S Commandsshow tacacs-server
show techsupport allshow techsupport all status
Description: Techsupport status for all
Syntax:
Statusstatus
Command Mode: exec : Exec Mode
Command Path:
# show techsupport all status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)634
S Commandsshow techsupport all
show techsupport controllersshow techsupport controllers status
Description: Techsupport status for controllers
Syntax:
Statusstatus
Command Mode: exec : Exec Mode
Command Path:
# show techsupport controllers status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 635
S Commandsshow techsupport controllers
show techsupport hostshow techsupport host <NUMBER> status
Description: Techsupport status for host
Syntax:
Specify the host Odev ID. Number range from=0to=9223372036854775807
<Odevid>
Statusstatus
Command Mode: exec : Exec Mode
Command Path:
# show techsupport host <NUMBER> status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)636
S Commandsshow techsupport host
show techsupport switchshow techsupport switch switchId <switchId> status
Description: Techsupport status for switch
Syntax:
switch id 101-4000 or range(s): 101-103,104switchId <switchId>
Statusstatus
Command Mode: exec : Exec Mode
Command Path:
# show techsupport switch switchId <switchId> status
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 637
S Commandsshow techsupport switch
show tenantshow tenant WORD
Description: Show Tenants Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)638
S Commandsshow tenant
show tenant access-listshow tenant WORD access-list WORD
Description: Show Access-list Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the Contract to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD access-list WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 639
S Commandsshow tenant access-list
show tenant applicationshow tenant WORD application WORD
Description: Show Application Profiles Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)640
S Commandsshow tenant application
show tenant application endpointsshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 641
S Commandsshow tenant application endpoints
show tenant application endpoints leaf interface ethernetshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface ethernet
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Ethernet Rangeethernet [<fex>/]<slot>/<port>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf<WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)642
S Commandsshow tenant application endpoints leaf interface ethernet
show tenant application endpoints leaf interface port-channelshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on an interface port-channel
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Port Channel Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf<WORD> interface port-channel <WORD> [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 643
S Commandsshow tenant application endpoints leaf interface port-channel
show tenant application endpoints vpcshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]
Description: Show IP endpoints on vpc
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
VPC Contextcontext
First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
VPC Interface nameinterface
VPC Interface namevpc
VPC Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164fex
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpccontext <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)644
S Commandsshow tenant application endpoints vpc
show tenant application epgshow tenant WORD application WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 645
S Commandsshow tenant application epg
show tenant application epg detailshow tenant WORD application WORD epg WORD detail
Description: Show detailed view of Application EPg
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)646
S Commandsshow tenant application epg detail
show tenant application epg endpointsshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 647
S Commandsshow tenant application epg endpoints
show tenant application epg endpoints leaf interface ethernetshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface ethernet
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Ethernet Rangeethernet [<fex>/]<slot>/<port>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)648
S Commandsshow tenant application epg endpoints leaf interface ethernet
show tenant application epg endpoints leaf interfaceport-channel
show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on an interface port-channel
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Port Channel Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 649
S Commandsshow tenant application epg endpoints leaf interface port-channel
show tenant application epg endpoints vpcshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]
Description: Show IP endpoints on vpc
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the application we eventually want to filter on (Max Size 64)WORD
Name of the AEPG to filter on (Max Size 64)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
VPC Contextcontext
First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
VPC Interface nameinterface
VPC Interface namevpc
VPC Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164fex
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)650
S Commandsshow tenant application epg endpoints vpc
EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 651
S Commandsshow tenant application epg endpoints vpc
show tenant bridge-domainshow tenant WORD bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)652
S Commandsshow tenant bridge-domain
show tenant bridge-domain detailshow tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 653
S Commandsshow tenant bridge-domain detail
show tenant contract-typeshow tenant WORD contract-type WORD
Description: Show Contracts Information Based on Type
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
whitelist (permit) or blacklist(deny) or oob-mgmt type of contractWORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD contract-type WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)654
S Commandsshow tenant contract-type
show tenant contractshow tenant WORD contract WORD
Description: Show Contracts Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the Contract to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD contract WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 655
S Commandsshow tenant contract
show tenant detailshow tenant WORD detail
Description: Show detailed view of tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)656
S Commandsshow tenant detail
show tenant dot1q-tunnelshow tenant WORD dot1q-tunnel WORD
Description: Show Dot1q-tunnel Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the TnlEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD dot1q-tunnel WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 657
S Commandsshow tenant dot1q-tunnel
show tenant endpointsshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)658
S Commandsshow tenant endpoints
show tenant endpoints leaf interface ethernetshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet[<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface ethernet
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Ethernet Rangeethernet [<fex>/]<slot>/<port>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 659
S Commandsshow tenant endpoints leaf interface ethernet
show tenant endpoints leaf interface port-channelshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex<NUMBER>]
Description: Show IP endpoints on an interface port-channel
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Port Channel Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)660
S Commandsshow tenant endpoints leaf interface port-channel
show tenant endpoints vpcshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD>[fex <fex>]
Description: Show IP endpoints on vpc
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
(Optional) Endpoint Typetype
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) IP Unicast address in format i.i.i.iA.B.C.D
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D
VPC Contextcontext
First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807
WORD
VPC Interface nameinterface
VPC Interface namevpc
VPC Name (Max Size 64)WORD
(Optional) Fex Id. Number range from=101 to=164fex
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 661
S Commandsshow tenant endpoints vpc
show tenant epgshow tenant WORD epg WORD
Description: Show Application EPG Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)662
S Commandsshow tenant epg
show tenant epg detailshow tenant WORD epg WORD detail
Description: Show detailed view of Application EPg
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the AEPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD epg WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 663
S Commandsshow tenant epg detail
show tenant external-l2 epgshow tenant WORD external-l2 epg WORD
Description: Show command for external-l2 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the EPG to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD external-l2 epg WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)664
S Commandsshow tenant external-l2 epg
show tenant interface bridge-domainshow tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 665
S Commandsshow tenant interface bridge-domain
show tenant interface bridge-domain detailshow tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Detailed Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)666
S Commandsshow tenant interface bridge-domain detail
show tenant ip interface bridge-domainshow tenant WORD ip interface bridge-domain WORD
Description: Show command for IP properties on interface BD
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD ip interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 667
S Commandsshow tenant ip interface bridge-domain
show tenant ipv6 interface bridge-domainshow tenant WORD ipv6 interface bridge-domain WORD
Description: Show command for IP properties on interface BD
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the bridge-domain (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD ipv6 interface bridge-domain WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)668
S Commandsshow tenant ipv6 interface bridge-domain
show tenant multicast-route-mapsshow tenant WORD multicast-route-maps
Description: Show multicast route-maps per Tenant
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD multicast-route-maps
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 669
S Commandsshow tenant multicast-route-maps
show tenant policy-mapshow tenant WORD policy-map
Description: Show policy maps
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)670
S Commandsshow tenant policy-map
show tenant policy-map type data-planeshow tenant WORD policy-map type data-plane WORD
Description: Data-plane type policy-map(s)
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
data-plane type policy-map(s) (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map type data-plane WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 671
S Commandsshow tenant policy-map type data-plane
show tenant policy-map type qosshow tenant WORD policy-map type qos WORD
Description: QOS type policy-map(s)
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
QOS type policy-map(s) (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map type qos WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)672
S Commandsshow tenant policy-map type qos
show tenant vrfshow tenant WORD vrf WORD
Description: Show VRF Information
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 673
S Commandsshow tenant vrf
show tenant vrf acllog l2show tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L2 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flowi statsflow
vlan infovlan
<vlan>. Number range from=0 to=9223372036854775807<vlan>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)674
S Commandsshow tenant vrf acllog l2
show tenant vrf acllog l3show tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D orA:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: L3 flow stats
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
permitDroppermitDrop
flow statsflow
source ipsrcip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
destination ipdstip
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D
protocolproto
<proto><proto>
source portsrcport
<srcport><srcport>
destination portdstport
<dstport><dstport>
source interfacesrcintf
<srcintf><srcintf>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip<A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 675
S Commandsshow tenant vrf acllog l3
show tenant vrf detailshow tenant WORD vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)676
S Commandsshow tenant vrf detail
show tenant vrf external-l3 bgpshow tenant WORD vrf WORD external-l3 bgp
Description: Show command for BGP peers
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 bgp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 677
S Commandsshow tenant vrf external-l3 bgp
show tenant vrf external-l3 bgp nodeshow tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name List<101-4000>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 bgp node <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)678
S Commandsshow tenant vrf external-l3 bgp node
show tenant vrf external-l3 eigrpshow tenant WORD vrf WORD external-l3 eigrp
Description: Show external l3 EIGRP
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 eigrp
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 679
S Commandsshow tenant vrf external-l3 eigrp
show tenant vrf external-l3 eigrp detailshow tenant WORD vrf WORD external-l3 eigrp detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 eigrp detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)680
S Commandsshow tenant vrf external-l3 eigrp detail
show tenant vrf external-l3 epgshow tenant WORD vrf WORD external-l3 epg <epgName>
Description: Show command for external-l3 epgs
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 681
S Commandsshow tenant vrf external-l3 epg
show tenant vrf external-l3 epg detailshow tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)682
S Commandsshow tenant vrf external-l3 epg detail
show tenant vrf external-l3 epg nameshow tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>
Description: EPG name to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 683
S Commandsshow tenant vrf external-l3 epg name
show tenant vrf external-l3 epg name detailshow tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail
Description: external-l3 epg in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Name of the EPG to filter on<epgName>
Name of the EPG to filter on<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)684
S Commandsshow tenant vrf external-l3 epg name detail
show tenant vrf external-l3 interfacesshow tenant WORD vrf WORD external-l3 interfaces
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 interfaces
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 685
S Commandsshow tenant vrf external-l3 interfaces
show tenant vrf external-l3 interfaces detailshow tenant WORD vrf WORD external-l3 interfaces detail
Description: Show interanl details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 interfaces detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)686
S Commandsshow tenant vrf external-l3 interfaces detail
show tenant vrf external-l3 ospfshow tenant WORD vrf WORD external-l3 ospf
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 ospf
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 687
S Commandsshow tenant vrf external-l3 ospf
show tenant vrf external-l3 ospf detailshow tenant WORD vrf WORD external-l3 ospf detail
Description: Show internal details
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 ospf detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)688
S Commandsshow tenant vrf external-l3 ospf detail
show tenant vrf external-l3 route-mapshow tenant WORD vrf WORD external-l3 route-map [name <l3out name>]
Description: Show command for external-l3 route-map
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
(Optional) Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 689
S Commandsshow tenant vrf external-l3 route-map
show tenant vrf external-l3 route-map detailshow tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail
Description: Show external-l3 route-map in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
(Optional) Name of the route-map to filter on<l3out name>
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)690
S Commandsshow tenant vrf external-l3 route-map detail
show tenant vrf external-l3 static-routeshow tenant WORD vrf WORD external-l3 static-route
Description: Show command for external-l3 static routes
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 691
S Commandsshow tenant vrf external-l3 static-route
show tenant vrf external-l3 static-route detailshow tenant WORD vrf WORD external-l3 static-route detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)692
S Commandsshow tenant vrf external-l3 static-route detail
show tenant vrf external-l3 static-route nodeshow tenant WORD vrf WORD external-l3 static-route node
Description: node to filter on
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route node
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 693
S Commandsshow tenant vrf external-l3 static-route node
show tenant vrf external-l3 static-route node detailshow tenant WORD vrf WORD external-l3 static-route node detail
Description: static-route in detail with operational status
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Leaf Range or Leaf Name Listarg
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route node detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)694
S Commandsshow tenant vrf external-l3 static-route node detail
show tenant vrf multicastshow tenant WORD vrf WORD multicast
Description: Show multicast configuration per VRF
Syntax:
Name of the tenant to filter on (Max Size 63)WORD
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD multicast
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 695
S Commandsshow tenant vrf multicast
show troubleshoot epext sessionshow troubleshoot epext session <session_name>
Description: Show session
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)696
S Commandsshow troubleshoot epext session
show troubleshoot epext session atomiccountershow troubleshoot epext session <session_name> atomiccounter
Description: Show atomic counters
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> atomiccounter
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 697
S Commandsshow troubleshoot epext session atomiccounter
show troubleshoot epext session auditshow troubleshoot epext session <session_name> audit
Description: Show audit
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> audit
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)698
S Commandsshow troubleshoot epext session audit
show troubleshoot epext session contractsshow troubleshoot epext session <session_name> contracts
Description: Show contracts
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> contracts
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 699
S Commandsshow troubleshoot epext session contracts
show troubleshoot epext session deploymentsshow troubleshoot epext session <session_name> deployments
Description: Show deployment changes
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> deployments
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)700
S Commandsshow troubleshoot epext session deployments
show troubleshoot epext session eventsshow troubleshoot epext session <session_name> events
Description: Show events
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> events
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 701
S Commandsshow troubleshoot epext session events
show troubleshoot epext session faultsshow troubleshoot epext session <session_name> faults
Description: Show faults
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> faults
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)702
S Commandsshow troubleshoot epext session faults
show troubleshoot epext session monitorshow troubleshoot epext session <session_name> monitor
Description: Show monitor
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> monitor
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 703
S Commandsshow troubleshoot epext session monitor
show troubleshoot epext session reportsshow troubleshoot epext session <session_name> reports
Description: Show reports
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> reports
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)704
S Commandsshow troubleshoot epext session reports
show troubleshoot epext session statisticsshow troubleshoot epext session <session_name> statistics
Description: Show statistics
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> statistics
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 705
S Commandsshow troubleshoot epext session statistics
show troubleshoot epext session topologyshow troubleshoot epext session <session_name> topology
Description: Show topology
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> topology
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)706
S Commandsshow troubleshoot epext session topology
show troubleshoot epext session tracerouteshow troubleshoot epext session <session_name> traceroute
Description: Show traceroute
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext session <session_name> traceroute
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 707
S Commandsshow troubleshoot epext session traceroute
show troubleshoot epext sessionsshow troubleshoot epext sessions
Description: Show sessions
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot epext sessions
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)708
S Commandsshow troubleshoot epext sessions
show troubleshoot eptoep sessionshow troubleshoot eptoep session <session_name>
Description: Show session
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 709
S Commandsshow troubleshoot eptoep session
show troubleshoot eptoep session atomiccountershow troubleshoot eptoep session <session_name> atomiccounter
Description: Show atomic counters
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> atomiccounter
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)710
S Commandsshow troubleshoot eptoep session atomiccounter
show troubleshoot eptoep session auditshow troubleshoot eptoep session <session_name> audit
Description: Show audit
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> audit
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 711
S Commandsshow troubleshoot eptoep session audit
show troubleshoot eptoep session contractsshow troubleshoot eptoep session <session_name> contracts
Description: Show contracts
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> contracts
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)712
S Commandsshow troubleshoot eptoep session contracts
show troubleshoot eptoep session deploymentsshow troubleshoot eptoep session <session_name> deployments
Description: Show deployment changes
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> deployments
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 713
S Commandsshow troubleshoot eptoep session deployments
show troubleshoot eptoep session eventsshow troubleshoot eptoep session <session_name> events
Description: Show events
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> events
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)714
S Commandsshow troubleshoot eptoep session events
show troubleshoot eptoep session faultsshow troubleshoot eptoep session <session_name> faults
Description: Show faults
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> faults
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 715
S Commandsshow troubleshoot eptoep session faults
show troubleshoot eptoep session monitorshow troubleshoot eptoep session <session_name> monitor
Description: Show monitor
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> monitor
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)716
S Commandsshow troubleshoot eptoep session monitor
show troubleshoot eptoep session reportsshow troubleshoot eptoep session <session_name> reports
Description: Show reports
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> reports
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 717
S Commandsshow troubleshoot eptoep session reports
show troubleshoot eptoep session statisticsshow troubleshoot eptoep session <session_name> statistics
Description: Show statistics
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> statistics
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)718
S Commandsshow troubleshoot eptoep session statistics
show troubleshoot eptoep session topologyshow troubleshoot eptoep session <session_name> topology
Description: Show topology
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> topology
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 719
S Commandsshow troubleshoot eptoep session topology
show troubleshoot eptoep session tracerouteshow troubleshoot eptoep session <session_name> traceroute
Description: Show traceroute
Syntax:
Session namesession_name
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep session <session_name> traceroute
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)720
S Commandsshow troubleshoot eptoep session traceroute
show troubleshoot eptoep sessionsshow troubleshoot eptoep sessions
Description: Show sessions
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot eptoep sessions
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 721
S Commandsshow troubleshoot eptoep sessions
show usernameshow username <WORD>
Description: Show user information
Syntax:
User nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show username <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)722
S Commandsshow username
show username detailshow username <WORD> detail
Description: Show user information
Syntax:
User nameWORD
Command Mode: exec : Exec Mode
Command Path:
# show username <WORD> detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 723
S Commandsshow username detail
show versionshow version
Description: Show version information
Command Mode: exec : Exec Mode
Command Path:
# show version
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)724
S Commandsshow version
show vlan-domainshow vlan-domain [name <arg>] [vlan] [leaf <arg>] [detail]
Description: Show command for vlan-domain
Syntax:
(Optional) Vlan-domain namearg
(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19<vlan-range>
(Optional) Leaf id. Number range from=101 to=4000arg
(Optional) vlan-domain in detail with concrete MOsdetail
Command Mode: exec : Exec Mode
Command Path:
# show vlan-domain [name <>] [vlan] [leaf <>] [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 725
S Commandsshow vlan-domain
show vmm internal debugshow vmm internal debug
Description: Show vmm debug information
Command Mode: exec : Exec Mode
Command Path:
# show vmm internal debug
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)726
S Commandsshow vmm internal debug
show vmm internal debug epgshow vmm internal debug epg tenant <tenantName> application <applicationName> epg <epgName>
Description: Show vmm EPg debug information
Syntax:
tenant-nametenant
tenant-name<tenantName>
application-nameapplication
application-name<applicationName>
epg-nameepg
epg-name<epgName>
Command Mode: exec : Exec Mode
Command Path:
# show vmm internal debug epg tenant <tenantName> application <applicationName> epg <epgName>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 727
S Commandsshow vmm internal debug epg
show vmm internal debug macshow vmm internal debug mac <macAddress>
Description: Show vmm mac address debug information
Syntax:
mac-address<macAddress>
Command Mode: exec : Exec Mode
Command Path:
# show vmm internal debug mac <macAddress>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)728
S Commandsshow vmm internal debug mac
show vmware domainshow vmware domain
Description: Show VMware domain information
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 729
S Commandsshow vmware domain
show vmware domain nameshow vmware domain name <name>
Description: VMware domain name
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)730
S Commandsshow vmware domain name
show vmware domain name epgshow vmware domain name <name> epg
Description: Show VMware domain EPG details
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> epg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 731
S Commandsshow vmware domain name epg
show vmware domain name esxshow vmware domain name <name> esx <esx-ip>
Description: Show VMware ESX information
Syntax:
VMware domain name<name>
ESX IP<esx-ip>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> esx <esx-ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)732
S Commandsshow vmware domain name esx
show vmware domain name port-groupshow vmware domain name <name> port-group
Description: Show VMware port group information
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> port-group
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 733
S Commandsshow vmware domain name port-group
show vmware domain name trunk-portgroupshow vmware domain name <name> trunk-portgroup [name <name>]
Description: Show VMware domain trunk portgroup details
Syntax:
VMware domain name<name>
(Optional) trunk portgroup name<name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> trunk-portgroup [name <name>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)734
S Commandsshow vmware domain name trunk-portgroup
show vmware domain name vcentershow vmware domain name <name> vcenter <hostname|ip>
Description: VMware vCenter ip or hostname
Syntax:
VMware domain name<name>
vCenter hostname or IP<hostname|ip>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vcenter <hostname|ip>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 735
S Commandsshow vmware domain name vcenter
show vmware domain name vmshow vmware domain name <name> vm
Description: Show VMware VM information
Syntax:
VMware domain name<name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vm
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)736
S Commandsshow vmware domain name vm
show vmware domain name vm nameshow vmware domain name <name> vm name <vm-name>
Description: Show detailed VMware VM information
Syntax:
VMware domain name<name>
VM Name<vm-name>
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vm name <vm-name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 737
S Commandsshow vmware domain name vm name
show vmware vmshow vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Description: Show VMware VM information
Syntax:
(Optional) Specify a VM nameWORD
(Optional) IP address in format i.i.i.iA.B.C.D
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: exec : Exec Mode
Command Path:
# show vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)738
S Commandsshow vmware vm
show vpcshow vpc map <vpc-list>
Description: Show vpc mapping
Syntax:
Map by namemap
vpc names<vpc-list>
Command Mode: exec : Exec Mode
Command Path:
# show vpc map <vpc-list>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 739
S Commandsshow vpc
show vpc map leafshow vpc map <vpc-list> leaf WORD [fex <NUMBER>]
Description: Leaf
Syntax:
Map by namemap
vpc names<vpc-list>
Leaf Range or Leaf Name ListWORD
(Optional) Fex ID. Number range from=101 to=164<101-164>
Command Mode: exec : Exec Mode
Command Path:
# show vpc map <vpc-list> leaf WORD [fex <NUMBER>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)740
S Commandsshow vpc map leaf
show vrfshow vrf WORD
Description: Show VRF Information
Syntax:
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show vrf WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 741
S Commandsshow vrf
show vrf detailshow vrf WORD detail
Description: Show detailed view of VRF
Syntax:
Name of the VRF to filter on (Max Size 64)WORD
Command Mode: exec : Exec Mode
Command Path:
# show vrf WORD detail
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)742
S Commandsshow vrf detail
show vsan-domainshow vsan-domain [name <arg>] [detail]
Description: Show command for vsan-domain
Syntax:
(Optional) Vsan-domain namearg
(Optional) Vsan-domain detailed informationdetail
Command Mode: exec : Exec Mode
Command Path:
# show vsan-domain [name <>] [detail]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 743
S Commandsshow vsan-domain
shutshut
Description: Disable BFD
Command Mode: template bfd : Configure BFD Interface Policy Templates
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template bfd <WORD> tenant <WORD>(config-template-bfd-pol)# shut
shut
Description: Disable BFD
Command Mode: template bfd : Configure BFD Interface Policy Templates
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template bfd <WORD> tenant <WORD>(config-template-bfd-pol)# shut
shut
Description: Disable monitor session
Command Mode: monitor virtual : Configure monitor session for virtual switches
Command Path:
# configure [['terminal', 't']](config)# monitor virtual session <WORD>(config-monitor-virtual)# shut
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)744
S Commandsshut
shutdownshutdown
Description: Administrative state of the Policer
Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic
Command Path:
# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# shutdown
shutdown
Description: Disable the class of service specified
Command Mode: qos parameters : Configure the global QOS policies
Command Path:
# configure [['terminal', 't']](config)# qos parameters level1|level2|level3(config-qos)# shutdown
shutdown
Description: Administrative state of the Policer
Command Mode: policy-map type data-plane : data-plane policy type
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# shutdown
shutdown
Description: dscp-map toggling
Command Mode: qos : Set DSCP Class translation values
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# qos dscp-map <WORD>(config-qos-cmap)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 745
S Commandsshutdown
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# shutdown
shutdown
Description: Disable Port Channel
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# shutdown
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)746
S Commandsshutdown
shutdown
Description: Disable Port Channel
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# shutdown
shutdown
Description: Disable Interface
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# shutdown
shutdown
Description: Disable interface
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# shutdown
shutdown
Description: Disable monitor session
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 747
S Commandsshutdown
(config)# monitor access session <session_name>(config-monitor-access)# shutdown
shutdown
Description: Disable monitor session
Command Mode: monitor fabric : Configue monitor session for fabric interfaces
Command Path:
# configure [['terminal', 't']](config)# monitor fabric session <session_name>(config-monitor-fabric)# shutdown
shutdown
Description: Disable monitor session
Command Mode: monitor tenant : Configue monitor session for tenant EPGs
Command Path:
# configure [['terminal', 't']](config)# monitor tenant <tenant_name> session <WORD>(config-monitor-tenant)# shutdown
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)748
S Commandsshutdown
site-idsite-id <WORD>
Description: ID of the network where the site is deployed
Syntax:
The site id (Max Size 512) surrounded by quotesWORD
Command Mode: destination-profile : Configure destination profile Parameters
Command Path:
# configure [['terminal', 't']](config)# callhome common(config-callhome)# destination-profile(config-callhome-destnprof)# site-id <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 749
S Commandssite-id
slow-drain congestion-timeout actionslow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)750
S Commandsslow-drain congestion-timeout action
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 751
S Commandsslow-drain congestion-timeout action
Sysloglog
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout action err-disable|log
slow-drain congestion-timeout action err-disable|log
Description: Configure congestion action
Syntax:
Error disableerr-disable
Sysloglog
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain congestion-timeout action err-disable|log
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)752
S Commandsslow-drain congestion-timeout action
slow-drain congestion-timeout countslow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 753
S Commandsslow-drain congestion-timeout count
(config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: interface port-channel : Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)754
S Commandsslow-drain congestion-timeout count
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout count <NUMBER>
slow-drain congestion-timeout count <NUMBER>
Description: Configure number of pause frames per second
Syntax:
Configure number of pause frames per second. Number range from=1to=10000
<range>
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain congestion-timeout count <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 755
S Commandsslow-drain congestion-timeout count
slow-drain pauseslow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)756
S Commandsslow-drain pause
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 757
S Commandsslow-drain pause
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain pause timeout <NUMBER>
slow-drain pause timeout <NUMBER>
Description: Configure pause frame timeout
Syntax:
Configure pause frame timeouttimeout
Configure pause timeout in milliseconds. Number range from=100to=1000
<interval>
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain pause timeout <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)758
S Commandsslow-drain pause
slow-timerslow-timer <NUMBER>
Description: Configure BFD SLOW-TIMER value in milliseconds
Syntax:
BFD interval. Number range from=1000 to=30000<interval>
Command Mode: template bfd : BFD group of commands
Command Path:
# configure [['terminal', 't']](config)# template bfd ip|ipv6 <WORD>(config-bfd)# slow-timer <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 759
S Commandsslow-timer
snapshot downloadsnapshot download <WORD>
Description: Configuration snapshot download setup mode
Syntax:
Snapshot downloader nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# snapshot download <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)760
S Commandssnapshot download
snapshot exportsnapshot export <WORD>
Description: Configuration export setup mode
Syntax:
Export configuration nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# snapshot export <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 761
S Commandssnapshot export
snapshot importsnapshot import <WORD>
Description: Configuration import setup mode
Syntax:
Import configuration nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# snapshot import <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)762
S Commandssnapshot import
snapshot rollbacksnapshot rollback <WORD>
Description: Configuration rollback setup mode
Syntax:
Rollback configuration nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# snapshot rollback <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 763
S Commandssnapshot rollback
snapshot uploadsnapshot upload <WORD>
Description: Configuration snapshot upload setup mode
Syntax:
Snapshot uploader nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# snapshot upload <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)764
S Commandssnapshot upload
snmp-server clientgroupsnmp-server clientgroup <group-name> [management-epg <mgmt-epg>] [client <ip-address/hostname>]
Description: Configure SNMP client-group
Syntax:
SNMP clientgroup<group-name>
(Optional) Management EPG (default: oob-default)<mgmt-epg>
(Optional) Ip-address/hostname of the snmp client<ip-address/hostname>
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server clientgroup <group-name> [management-epg<mgmt-epg>] [client <ip-address/hostname>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 765
S Commandssnmp-server clientgroup
snmp-server communitysnmp-server community <community-name>
Description: Configure SNMP community
Syntax:
SNMP community<community-name>
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server community <community-name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)766
S Commandssnmp-server community
snmp-server contactsnmp-server contact <contact-name>
Description: Configure SNMP contact
Syntax:
SNMP contact name<contact-name>
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server contact <contact-name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 767
S Commandssnmp-server contact
snmp-server hostsnmp-server host <ip-address/hostname> traps-version 1|2c|3 <community> auth|none|priv [udp-port <port>][management-epg <mgmt-epg>]
Description: Configure SNMP trap host
Syntax:
Ip-address/hostname of the snmp trap destination<ip-address/hostname>
SNMP Version to use for trapstraps-version
Use SNMPv11
Use SNMPv22c
Use SNMPv33
SNMP community/security<community>
Use Authentication Onlyauth
Use No Authenticationnone
Use Authentication and Encryptionpriv
(Optional) UDP port for traps (default 162)<port>
(Optional) Management EPG (default: oob-default)<mgmt-epg>
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server host <ip-address/hostname> traps-version 1|2c|3<community> auth|none|priv [udp-port <port>] [management-epg <mgmt-epg>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)768
S Commandssnmp-server host
snmp-server locationsnmp-server location <location-name>
Description: Configure SNMP location
Syntax:
SNMP location<location-name>
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server location <location-name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 769
S Commandssnmp-server location
snmp-server protocolsnmp-server protocol enable
Description: Enable SNMP protocol
Syntax:
Enable SNMP protocolenable
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server protocol enable
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)770
S Commandssnmp-server protocol
snmp-server usersnmp-server user <user-name> auth sha|md5 priv aes|des|none
Description: Configure SNMP user
Syntax:
SNMP user<user-name>
Authentication Typeauth
Use HMAC SHA algorithm for authenticationsha
Use HMAC MD5 algorithm for authenticationmd5
Privacy Typepriv
Use 128-bit AES algorithm for privacyaes
Use 64-bit DES algorithm for privacydes
Do not use privacynone
Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)
Command Path:
# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server user <user-name> auth sha|md5 priv aes|des|none
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 771
S Commandssnmp-server user
sourcesource address <A.B.C.D|A:B::C:D/LEN>
Description: Configure source
Syntax:
IP Addressaddress
Source of the exporter in format x.x.x.x|x::x/m. Recommended to containroom for at least 12 host bits
A.B.C.D|A:B::C:D/LEN
Command Mode: flow exporter : Configure Netflow Exporter
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# flow exporter <WORD> destination address <A.B.C.D or A:B::C:D> transportudp <dstPort>(config-tn-flow-exporter)# source address <A.B.C.D|A:B::C:D/LEN>
source address <A.B.C.D|A:B::C:D/LEN>
Description: Configure source
Syntax:
IP Addressaddress
Source of the exporter in format x.x.x.x|x::x/m. Recommended to containroom for at least 12 host bits
A.B.C.D|A:B::C:D/LEN
Command Mode: flow exporter : Configure Netflow Exporter
Command Path:
# configure [['terminal', 't']](config)# flow exporter <WORD> destination address <A.B.C.D or A:B::C:D> transport udp<dstPort>(config-flow-exporter)# source address <A.B.C.D|A:B::C:D/LEN>
source address <A.B.C.D|A:B::C:D/LEN>
Description: Configure source
Syntax:
IP Addressaddress
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)772
S Commandssource
Source of the exporter in format x.x.x.x|x::x/m. Recommended to containroom for at least 12 host bits
A.B.C.D|A:B::C:D/LEN
Command Mode: flow vm-exporter : Configure NetFlow Exporter for VM Networking
Command Path:
# configure [['terminal', 't']](config)# flow vm-exporter <WORD> destination address <A.B.C.D or A:B::C:D> transport udp<dstPort>(config-flow-vm-exporter)# source address <A.B.C.D|A:B::C:D/LEN>
source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]
Description: Configure monitor virtual source
Syntax:
tenanttenant
tenant name (Max Size 63)WORD
applicationapplication
application name (Max Size 64)WORD
epgepg
epg name (Max Size 64)WORD
(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)
E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE
Command Mode: monitor virtual : Configure monitor session for virtual switches
Command Path:
# configure [['terminal', 't']](config)# monitor virtual session <WORD>(config-monitor-virtual)# source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 773
S Commandssource
source applicationsource application <application_name> epg <epg_name>
Description: Configure EPG as monitor source
Syntax:
application name (Max Size 64)application_name
epgepg
epg name (Max Size 64)epg_name
Command Mode: monitor tenant : Configue monitor session for tenant EPGs
Command Path:
# configure [['terminal', 't']](config)# monitor tenant <tenant_name> session <WORD>(config-monitor-tenant)# source application <application_name> epg <epg_name>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)774
S Commandssource application
source interface ethernetsource interface ethernet <ethernet> leaf <leaf Id>
Description: Configure monitor for ethernet access interfaces
Syntax:
List of ethernet itfs<ethernet>
leafleaf
leaf Id<leaf Id>
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id>
source interface ethernet <ethernet> switch <switch Id>
Description: Configure monitor for ethernet fabric interfaces
Syntax:
ethernet interface range<ethernet>
switchswitch
switch Id<switch Id>
Command Mode: monitor fabric : Configue monitor session for fabric interfaces
Command Path:
# configure [['terminal', 't']](config)# monitor fabric session <session_name>(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 775
S Commandssource interface ethernet
source interface port-channelsource interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]
Description: Configure monitor for port-channel interfaces
Syntax:
<port-channel list><port-channel list>
leafleaf
leaf Id<leaf Id>
(Optional) fex Id<fex Id>
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id>[fex <fex Id>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)776
S Commandssource interface port-channel
source interface vpcsource interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]
Description: Configure monitor for VPC interfaces
Syntax:
<vpc list><vpc list>
leafleaf
leaf Id1<leaf Id1>
leaf Id2<leaf Id2>
(Optional) paired fex Ids<fex Ids>
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex<fex Ids>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 777
S Commandssource interface vpc
spanning-treespanning-tree mst configuration
Description: STP MST configuration mode
Syntax:
Multiple spanning treemst
Configure multiple spanning tree protocolconfiguration
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# spanning-tree mst configuration
spanning-tree
Description: Add spanning tree
Command Mode: template leaf-policy-group : Configure Leaf Policy Group
Command Path:
# configure [['terminal', 't']](config)# template leaf-policy-group <WORD>(config-leaf-policy-group)# spanning-tree
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable or Disable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)778
S Commandsspanning-tree
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable or disable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 779
S Commandsspanning-tree
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable or disable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Enable BPDU filter/guard
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)780
S Commandsspanning-tree
spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Description: Spanning Tree Subsystem
Syntax:
Don't send or receive BPDUs on this interfacebpdu-filter
Don't accept BPDUs on this interfacebpdu-guard
enable/disable BPDU filter/guard<enable|disable>
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 781
S Commandsspanning-tree
spanning-tree bpdu-filterspanning-tree bpdu-filter enable|disable|default
Description: Configure BPDU filter override on AVS uplink ports
Syntax:
Enable BPDU filterenable
Disable BPDU filterdisable
Remove BPDU filter/guard override policydefault
Command Mode: configure-avs : Configure a VMWare Domain as AVS (N1K) type
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# spanning-tree bpdu-filter enable|disable|default
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)782
S Commandsspanning-tree bpdu-filter
spanning-tree bpdu-guardspanning-tree bpdu-guard enable|disable|default
Description: Configure BPDU guard override on AVS uplink ports
Syntax:
Enable BPDU guardenable
Disable BPDU guarddisable
Remove BPDU filter/guard override policydefault
Command Mode: configure-avs : Configure a VMWare Domain as AVS (N1K) type
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# spanning-tree bpdu-guard enable|disable|default
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 783
S Commandsspanning-tree bpdu-guard
speedspeed <interfaceSpeed>
Description: Configure Interface Speed
Syntax:
Interface Speed Policy<interfaceSpeed>
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# speed <interfaceSpeed>
speed <portChannelSpeed>
Description: Configure Interface Speed
Syntax:
Port-Channel Speed Policy<portChannelSpeed>
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# speed <portChannelSpeed>
speed <interfaceSpeed>
Description: Configure Interface Speed
Syntax:
Interface Speed Policy<interfaceSpeed>
Command Mode: template spine-interface-policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template spine-interface-policy-group <WORD>(config-spine-if-pol-grp)# speed <interfaceSpeed>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)784
S Commandsspeed
speed <interfaceSpeed>
Description: Configure Interface Speed
Syntax:
Interface Speed Policy<interfaceSpeed>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# speed <interfaceSpeed>
speed <speed>
Description: Configure Interface Speed
Syntax:
Speed Value<speed>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# speed <speed>
speed <interfaceSpeed>
Description: Configure Interface Speed
Syntax:
Interface Speed Policy<interfaceSpeed>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# speed <interfaceSpeed>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 785
S Commandsspeed
speed <speed>
Description: Configure Interface Speed
Syntax:
Speed Value<speed>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# speed <speed>
speed <speed>
Description: Configure Interface Speed
Syntax:
Interface Speed Policy<speed>
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# speed <speed>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)786
S Commandsspeed
spf-intervalspf-interval level-1 <NUMBER> <50-120000> <50-120000>
Description: Set the ISIS SPF maximal wait interval
Syntax:
Level 1level-1
SPF maximum wait interval. Number range from=50 to=120000<50-120000>
Initial and secondary wait intervals (both values are required)<50-120000> <50-120000>
Command Mode: isis : Intermediate System to Intermediate System (IS-IS)
Command Path:
# configure [['terminal', 't']](config)# pod <NUMBER>(config-pod)# isis fabric(config-pod-isis)# spf-interval level-1 <NUMBER> <50-120000> <50-120000>
spf-interval level-1 <NUMBER> <50-120000> <50-120000>
Description: Set the ISIS SPF maximal wait interval
Syntax:
Level 1level-1
SPF maximum wait interval. Number range from=50 to=120000<50-120000>
Initial and secondary wait intervals (both values are required)<50-120000> <50-120000>
Command Mode: template isis-fabric : InterSystem-InterSystem Protocol (IS-IS)
Command Path:
# configure [['terminal', 't']](config)# template isis-fabric <WORD>(config-template-isis-fabric)# spf-interval level-1 <NUMBER> <50-120000> <50-120000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 787
S Commandsspf-interval
spine-groupspine-group <WORD>
Description: Configure Spine Group
Syntax:
Spine Group name (Max Size 64)WORD
Command Mode: spine-profile : Configure Spine Profile
Command Path:
# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-group <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)788
S Commandsspine-group
spine-interface-groupspine-interface-group <WORD>
Description: Configure Spine Interface Group
Syntax:
Spine Interface Group name (Max Size 64)WORD
Command Mode: spine-interface-profile : Create Spine Interface Profile
Command Path:
# configure [['terminal', 't']](config)# spine-interface-profile <WORD>(config-spine-if-profile)# spine-interface-group <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 789
S Commandsspine-interface-group
spine-interface-policy-groupspine-interface-policy-group <WORD>
Description: Associate an Interface Policy Group to this Interface Group
Syntax:
Spine Interface Policy Group Name (Max Size 64)WORD
Command Mode: spine-interface-group : Configure Spine Interface Group
Command Path:
# configure [['terminal', 't']](config)# spine-interface-profile <WORD>(config-spine-if-profile)# spine-interface-group <WORD>(config-spine-if-group)# spine-interface-policy-group <WORD>
spine-interface-policy-group <WORD> [force]
Description: Configure Spine Interface Policy Group
Syntax:
Spine Interface Policy Group Name (Max Size 64)WORD
(Optional) Delete Per Port Configuration and applyspine-interface-policy-group config
force
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# spine-interface-policy-group <WORD> [force]
spine-interface-policy-group <WORD> [force]
Description: Configure Spine Interface Policy Group
Syntax:
Spine Interface Policy Group Name (Max Size 64)WORD
(Optional) Delete Per Port Configuration and applyspine-interface-policy-group config
force
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)790
S Commandsspine-interface-policy-group
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# spine-interface-policy-group <WORD> [force]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 791
S Commandsspine-interface-policy-group
spine-interface-profilespine-interface-profile <WORD>
Description: Attach Spine Interface Profile to the Spine Profile
Syntax:
Spine Interface Profile name (Max Size 64)WORD
Command Mode: spine-profile : Configure Spine Profile
Command Path:
# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-interface-profile <WORD>
spine-interface-profile <WORD>
Description: Create Spine Interface Profile
Syntax:
Spine Interface Profile name (Max Size 64)WORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# spine-interface-profile <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)792
S Commandsspine-interface-profile
spine-profilespine-profile <WORD>
Description: Configure Spine Profile
Syntax:
Spine Profile name (Max Size 64)WORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# spine-profile <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 793
S Commandsspine-profile
spinespine <101-4000>
Description: Provide a Range of Nodes
Syntax:
Spine Range or Spine Name List<101-4000>
Command Mode: spine-group : Configure Spine Group
Command Path:
# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-group <WORD>(config-spine-group)# spine <101-4000>
spine <101-4000>
Description: Configure Spine Node
Syntax:
Spine Range or Spine Name List<101-4000>
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)794
S Commandsspine
ssh-keyssh-key <WORD>
Description: Update ssh key for the user for ssh authentication
Syntax:
A name for SSH key (Max Size 64)WORD
Command Mode: username : Create a locally-authenticated user account
Command Path:
# configure [['terminal', 't']](config)# username <WORD>(config-username)# ssh-key <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 795
S Commandsssh-key
ssh-servicessh-service
Description: SSH communication policy group
Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https
Command Path:
# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# ssh-service
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)796
S Commandsssh-service
ssl-protocolsssl-protocols <sslProtocols>
Description: Set the SSL protocol (comma separated values)
Syntax:
SSL Protocols as comma separated values like val1,val2,..valNsslProtocols
Command Mode: https : HTTPS communication policy group
Command Path:
# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# https(config-https)# ssl-protocols <sslProtocols>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 797
S Commandsssl-protocols
ssl-validation-levelssl-validation-level <ssl-validation-level>
Description: Set the LDAP Server SSL Certificate validation level
Syntax:
<ssl-validation-level><ssl-validation-level>
Command Mode: ldap-server host : LDAP server DNS name or IP address
Command Path:
# configure [['terminal', 't']](config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>(config-host)# ssl-validation-level <ssl-validation-level>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)798
S Commandsssl-validation-level
statestate <WORD>
Description: Set The state or province in which the organization is located.
Syntax:
state or province (Max Size 64)<WORD>
Command Mode: csr : A csr mode to create and hold an SSL certificate
Command Path:
# configure [['terminal', 't']](config)# crypto keyring <WORD>(config-keyring)# csr(config-csr)# state <WORD>
state <cipherState>
Description: Cipher state
Syntax:
Cipher state as comma separated values like val1,val2,..valNcipherState
Command Mode: ciphers : HTTPS cipher suite
Command Path:
# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# https(config-https)# ciphers <WORD>(config-ciphers)# state <cipherState>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 799
S Commandsstate
static-endpointstatic-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Description: Configure Silent Host behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn
(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Description: Configure silent Host behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)800
S Commandsstatic-endpoint
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn
(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Description: Configure Silent Host behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn
(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 801
S Commandsstatic-endpoint
(config-spine)# interface ethernet <ifRange>(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Description: Configure silent Host behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn
(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Description: Configure silent Host behind a EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)802
S Commandsstatic-endpoint
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn
(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 803
S Commandsstatic-endpoint
static-tepstatic-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>
Description: Configure a static Tunnel Endpoint behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
VLAN range. Number range from=1 to=4094<1-4094>
IP address in format i.i.i.iA.B.C.D
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>
static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>
Description: Configure a static Tunnel Endpoint behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)804
S Commandsstatic-tep
VLAN range. Number range from=1 to=4094<1-4094>
IP address in format i.i.i.iA.B.C.D
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>
static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>
Description: Configure a static Tunnel Endpoint behind an EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
VLAN range. Number range from=1 to=4094<1-4094>
IP address in format i.i.i.iA.B.C.D
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>
static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>
Description: Configure a static Tunnel Endpoint behind an EPG with a Static Path Attachment
Syntax:
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 805
S Commandsstatic-tep
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
VLAN range. Number range from=1 to=4094<1-4094>
IP address in format i.i.i.iA.B.C.D
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>
static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>
Description: Configure a static Tunnel Endpoint behind a EPG with a Static Path Attachment
Syntax:
MAC addressmac
MAC address (Option 1)E.E.E
MAC address (Option 2)EE-EE-EE-EE-EE-EE
MAC address (Option 3)EE:EE:EE:EE:EE:EE
MAC address (Option 4)EEEE.EEEE.EEEE
Encapsulation Vlanvlan
VLAN range. Number range from=1 to=4094<1-4094>
IP address in format i.i.i.iA.B.C.D
Command Mode: interface : Provide VPC Name
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)806
S Commandsstatic-tep
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 807
S Commandsstatic-tep
statisticsstatistics enable
Description: Enable/disable stats collection on vCenter
Syntax:
enableenable
Command Mode: vcenter : Configure a vCenter in the VMware domain
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>](config-vmware-vc)# statistics enable
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)808
S Commandsstatistics
storm-control levelstorm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 809
S Commandsstorm-control level
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)810
S Commandsstorm-control level
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]
storm-control level <0-100> [burst-rate <0-100>]
Description: Configure Storm Control Level (bandwidth percentage) on the Interface
Syntax:
Rate of Bandwidth in Percentage<0-100>
(Optional) Max Rate of Bandwidth in Percentage<0-100>
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# storm-control level <0-100> [burst-rate <0-100>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 811
S Commandsstorm-control level
storm-control ppsstorm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)812
S Commandsstorm-control pps
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 813
S Commandsstorm-control pps
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control pps <> burst-rate <>
storm-control pps <arg> burst-rate <arg>
Description: Configure Storm Control in packet per second on the Interface
Syntax:
Burst Rate in packets per second. Number range from=0 to=4882812arg
Max Burst Rate in packets per secondburst-rate
Max Burst Rate in packets per second. Number range from=0to=4882812
arg
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# storm-control pps <> burst-rate <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)814
S Commandsstorm-control pps
street-addressstreet-address <WORD>
Description: Street address of the site
Syntax:
The street address (Max Size 255) surrounded by quotesWORD
Command Mode: destination-profile : Configure destination profile Parameters
Command Path:
# configure [['terminal', 't']](config)# callhome common(config-callhome)# destination-profile(config-callhome-destnprof)# street-address <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 815
S Commandsstreet-address
subjectsubject <WORD>
Description: Set The fully qualified domain name or DN of the requesting device.
Syntax:
FQDN or DN of device (Max Size 64)<WORD>
Command Mode: csr : A csr mode to create and hold an SSL certificate
Command Path:
# configure [['terminal', 't']](config)# crypto keyring <WORD>(config-keyring)# csr(config-csr)# subject <WORD>
subject <WORD>
Description: Configuration a subject on the contract
Syntax:
Name of the contract subject (Max Size 64)WORD
Command Mode: contract : Configure binary contracts between Application EPGs
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)816
S Commandssubject
subnetsubnet <WORD>
Description: Configure Private IP Subnet
Syntax:
WORDWORD
Command Mode: l4l7 resource-pool : Configure L4-L7 Service Resource Pool
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 resource-pool <WORD>(config-resource-pool)# subnet <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 817
S Commandssubnet
summary-addresssummary-address <IP-PREFIX/LEN>
Description: Route summarization
Syntax:
Summarized ipIP-PREFIX/LEN
Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# router ospf default(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>(config-leaf-ospf-vrf)# summary-address <IP-PREFIX/LEN>
summary-address <IP-PREFIX/LEN>
Description: Route summarization
Syntax:
Summarized ipIP-PREFIX/LEN
Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# router ospf default(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>(config-leaf-ospf-vrf)# summary-address <IP-PREFIX/LEN>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)818
S Commandssummary-address
svcredir-polsvcredir-pol tenant <tenant> name <WORD>
Description: Configure Service Redirection Policy for a L4-L7 Graph Connector.
Syntax:
Tenant in which the service redirection policy is availabletenant
Tenant in which the service redirection policy is available<tenant>
Service redirection policy namename
Service redirection policy name (Max Size 64)WORD
Command Mode: connector : Configure Connector for a Service Node
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 graph <WORD> [contract <contract-option>](config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode<Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>](config-service)# connector <WORD> [cluster-interface <WORD>](config-connector)# svcredir-pol tenant <tenant> name <WORD>
svcredir-pol <WORD>
Description: Configure L4L7 service redirection policy
Syntax:
service redirection policy name (Max Size 64)WORD
Command Mode: tenant : Tenant configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# svcredir-pol <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 819
S Commandssvcredir-pol
switch-groupswitch-group <WORD>
Description: Create switch firmware upgrade policy
Syntax:
switch-group name (Max Size 64)WORD
Command Mode: firmware : Firmware upgrade configuration Mode
Command Path:
# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)820
S Commandsswitch-group
switchswitch
Description: Add switches to switch group
Syntax:
arg
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# switch
switch
Description: Configure Leaf Node
Syntax:
arg
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# switch
switch
Description: Add switches to zone
Syntax:
arg
Command Mode: zone : Create zone policy
Command Path:
# configure [['terminal', 't']](config)# zones(config-zones)# zone <WORD>(config-zone)# switch
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 821
S Commandsswitch
switchingswitching mode vlan|vxlan|vxlan-ns
Description: Configure switching mode.
Syntax:
switching Modemode
VLAN/SW Modevlan
VXLAN/SW Modevxlan
VXLAN/HWModevxlan-ns
Command Mode: configure-avs : Configure a VMWare Domain as AVS (N1K) type
Command Path:
# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# switching mode vlan|vxlan|vxlan-ns
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)822
S Commandsswitching
switchportswitchport
Description: Configure switchport parameters
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport
switchport
Description: Configure switchport parameters
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport
switchport
Description: Configure switchport parameters
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport
switchport
Description: Configure switchport parameters
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport
switchport
Description: Configure switchport parameters
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 823
S Commandsswitchport
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)824
S Commandsswitchport
switchport access vlan tenant applicationswitchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template port-channel : Configure Port-Channel Parameters
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 825
S Commandsswitchport access vlan tenant application
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)826
S Commandsswitchport access vlan tenant application
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vlanvlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 827
S Commandsswitchport access vlan tenant application
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)828
S Commandsswitchport access vlan tenant application
switchport access vlan tenant external-sviswitchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Access Interface
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to Acess L2 Interface
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface port-channel : Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 829
S Commandsswitchport access vlan tenant external-svi
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Access Interface
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to Acess L2 Interface
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)830
S Commandsswitchport access vlan tenant external-svi
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to Acess L2 Interface
Syntax:
Access Vlanvlan
Access Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 831
S Commandsswitchport access vlan tenant external-svi
switchport modeswitchport mode <arg>
Description: Configure switchport mode for interface
Syntax:
arg
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport mode <>
switchport mode <arg>
Description: Configure switchport mode for vfc interface
Syntax:
arg
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport mode <>
switchport mode dot1q-tunnel
Description: Tunnel Configuration
Syntax:
QinQ Tunnel Configurationdot1q-tunnel
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport mode dot1q-tunnel
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)832
S Commandsswitchport mode
switchport mode dot1q-tunnel
Description: Tunnel Configuration
Syntax:
QinQ Tunnel Configurationdot1q-tunnel
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport mode dot1q-tunnel
switchport mode <arg>
Description: Configure switchport mode for vfc interface
Syntax:
arg
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport mode <>
switchport mode <arg>
Description: Configure switchport mode for vfc interface
Syntax:
arg
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport mode <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 833
S Commandsswitchport mode
switchport mode dot1q-tunnel
Description: Tunnel Configuration
Syntax:
QinQ Tunnel Configurationdot1q-tunnel
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport mode dot1q-tunnel
switchport mode dot1q-tunnel
Description: Tunnel Configuration
Syntax:
QinQ Tunnel Configurationdot1q-tunnel
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport mode dot1q-tunnel
switchport mode <arg>
Description: Configure switchport mode for vfc interface
Syntax:
arg
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport mode <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)834
S Commandsswitchport mode
switchport mode <arg>
Description: Configure switchport mode for vfc interface
Syntax:
arg
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport mode <>
switchport mode <arg>
Description: Configure switchport mode for interface
Syntax:
arg
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport mode <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 835
S Commandsswitchport mode
switchport port-security maximumswitchport port-security maximum <count>
Description:
Syntax:
. Number range from=0 to=12000count
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport port-security maximum <count>
switchport port-security maximum <count>
Description:
Syntax:
. Number range from=0 to=12000count
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport port-security maximum <count>
switchport port-security maximum <arg>
Description: Port-security configuration
Syntax:
. Number range from=0 to=12000arg
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security maximum <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)836
S Commandsswitchport port-security maximum
switchport port-security maximum <arg>
Description: Port-security configuration
Syntax:
. Number range from=0 to=12000arg
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security maximum <>
switchport port-security maximum <arg>
Description: Port-security configuration
Syntax:
. Number range from=0 to=12000arg
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security maximum <>
switchport port-security maximum <arg>
Description: Port-security configuration
Syntax:
. Number range from=0 to=12000arg
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security maximum <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 837
S Commandsswitchport port-security maximum
switchport port-security maximum <arg>
Description: Port-security configuration
Syntax:
. Number range from=0 to=12000arg
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport port-security maximum <>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)838
S Commandsswitchport port-security maximum
switchport port-security violationswitchport port-security violation protect
Description:
Syntax:
protect
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport port-security violation protect
switchport port-security violation protect
Description:
Syntax:
protect
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport port-security violation protect
switchport port-security violation protect
Description: Port-security configuration
Syntax:
protect
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security violation protect
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 839
S Commandsswitchport port-security violation
switchport port-security violation protect
Description: Port-security configuration
Syntax:
protect
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security violation protect
switchport port-security violation protect
Description: Port-security configuration
Syntax:
protect
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security violation protect
switchport port-security violation protect
Description: Port-security configuration
Syntax:
protect
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security violation protect
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)840
S Commandsswitchport port-security violation
switchport port-security violation protect
Description: Port-security configuration
Syntax:
protect
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport port-security violation protect
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 841
S Commandsswitchport port-security violation
switchport tenantswitchport tenant <WORD> dot1q-tunnel <WORD>
Description: dot1q-tunnel Configuration
Syntax:
Tenant hosting the EPg (Max Size 63)WORD
Add an dot1q-tunneldot1q-tunnel
Tunnel EPG name (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>
switchport tenant <WORD> dot1q-tunnel <WORD>
Description: dot1q-tunnel Configuration
Syntax:
Tenant hosting the EPg (Max Size 63)WORD
Add an dot1q-tunneldot1q-tunnel
Tunnel EPG name (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>
switchport tenant <WORD> dot1q-tunnel <WORD>
Description: dot1q-tunnel Configuration
Syntax:
Tenant hosting the EPg (Max Size 63)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)842
S Commandsswitchport tenant
Add an dot1q-tunneldot1q-tunnel
Tunnel EPG name (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>
switchport tenant <WORD> dot1q-tunnel <WORD>
Description: dot1q-tunnel Configuration
Syntax:
Tenant hosting the EPg (Max Size 63)WORD
Add an dot1q-tunneldot1q-tunnel
Tunnel EPG name (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>
switchport tenant <WORD> dot1q-tunnel <WORD>
Description: dot1q-tunnel Configuration
Syntax:
Tenant hosting the EPg (Max Size 63)WORD
Add an dot1q-tunneldot1q-tunnel
Tunnel EPG name (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 843
S Commandsswitchport tenant
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport tenant <WORD> dot1q-tunnel <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)844
S Commandsswitchport tenant
switchport trunk allowed vlan inband-mgmtswitchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>
Description: Configure External L2 connectivity to inband Mnaagement
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Gateway IP Address for External Connectivity format x.x.x.x/mA.B.C.D/LEN
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>
switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>
Description: Configure External L2 connectivity to inband Mnaagement
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Gateway IP Address for External Connectivity format x.x.x.x/mA.B.C.D/LEN
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 845
S Commandsswitchport trunk allowed vlan inband-mgmt
switchport trunk allowed vlan tenant applicationswitchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template port-channel : Configure Port-Channel Parameters
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)846
S Commandsswitchport trunk allowed vlan tenant application
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlanprimary-vlan <evlan>]
Description: Add an AEPg as static encap
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
(Optional) Vlan for egress traffic when EPG isolation is enforcedprimary-vlan <evlan>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD> [primary-vlan primary-vlan <evlan>]
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 847
S Commandsswitchport trunk allowed vlan tenant application
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlanprimary-vlan <evlan>]
Description: Add an AEPg as static encap
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
(Optional) Vlan for egress traffic when EPG isolation is enforcedprimary-vlan <evlan>
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD> [primary-vlan primary-vlan <evlan>]
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation Vlanvlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)848
S Commandsswitchport trunk allowed vlan tenant application
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 849
S Commandsswitchport trunk allowed vlan tenant application
switchport trunk allowed vlan tenant external-l2switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Description: Add a L2 external EPG on the interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
L2 external EPG nameepg
L2 external EPG name (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Description: Add a L2 external EPG on the interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
L2 external EPG nameepg
L2 external EPG name (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)850
S Commandsswitchport trunk allowed vlan tenant external-l2
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Description: Add a L2 external EPG on the interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
L2 external EPG nameepg
L2 external EPG name (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Description: Add a L2 external EPG on the interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
L2 external EPG nameepg
L2 external EPG name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 851
S Commandsswitchport trunk allowed vlan tenant external-l2
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Description: Add a L2 external EPG on the interface
Syntax:
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
L2 external EPG nameepg
L2 external EPG name (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)852
S Commandsswitchport trunk allowed vlan tenant external-l2
switchport trunk allowed vlan tenant external-sviswitchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface port-channel : Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 853
S Commandsswitchport trunk allowed vlan tenant external-svi
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Interface
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)854
S Commandsswitchport trunk allowed vlan tenant external-svi
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Interface
Syntax:
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 855
S Commandsswitchport trunk allowed vlan tenant external-svi
switchport trunk allowed vlan tenant legacy-forwardingswitchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Description: Add legacy forwarding on the vlan supplied
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Description: Add legacy forwarding on the vlan supplied
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Description: Add legacy forwarding on the vlan supplied
Syntax:
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)856
S Commandsswitchport trunk allowed vlan tenant legacy-forwarding
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Description: Add legacy forwarding on the vlan supplied
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Description: Add legacy forwarding on the vlan supplied
Syntax:
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPgtenant
Tenant hosting the EPg (Max Size 63)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 857
S Commandsswitchport trunk allowed vlan tenant legacy-forwarding
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)858
S Commandsswitchport trunk allowed vlan tenant legacy-forwarding
switchport trunk allowed vsan tenant applicationswitchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation vsanvsan
VSAN Id. Number range from=1 to=4093vsan-id
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation vsanvsan
VSAN Id. Number range from=1 to=4093vsan-id
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc-po : VFC Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 859
S Commandsswitchport trunk allowed vsan tenant application
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation vsanvsan
VSAN Id. Number range from=1 to=4093vsan-id
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>
switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Add an AEPg as static encap
Syntax:
Encapsulation vsanvsan
VSAN Id. Number range from=1 to=4093vsan-id
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)860
S Commandsswitchport trunk allowed vsan tenant application
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 861
S Commandsswitchport trunk allowed vsan tenant application
switchport trunk native vlan tenant applicationswitchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the EPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: template port-channel : Configure Port-Channel Parameters
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)862
S Commandsswitchport trunk native vlan tenant application
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application hosting the AEPg
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application hosting the AEPg
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 863
S Commandsswitchport trunk native vlan tenant application
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application hosting the AEPg
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application hosting the AEPg
Syntax:
Native Vlanvlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)864
S Commandsswitchport trunk native vlan tenant application
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>
switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application hosting the AEPg
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 865
S Commandsswitchport trunk native vlan tenant application
switchport trunk native vlan tenant external-sviswitchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Trunk Interface
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate Native Vlan to the L2 Trunk Interface as external SVI
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface port-channel : Port Channel interface
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)866
S Commandsswitchport trunk native vlan tenant external-svi
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to the L2 Trunk Interface
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate Native Vlan to the L2 Trunk Interface as external SVI
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 867
S Commandsswitchport trunk native vlan tenant external-svi
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD
Description: Associate SVI to Trunk L2 Interface
Syntax:
Native Vlanvlan
Native Vlan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
(Optional) Specify one or more l3extOut to add SVI interfacel3out
l3extOut NameWORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)868
S Commandsswitchport trunk native vlan tenant external-svi
switchport vlanswitchport vlan scope local
Description: Switchport vlan configuration
Syntax:
scope
Local Scopelocal
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport vlan scope local
switchport vlan scope local
Description:
Syntax:
scope
Local Scopelocal
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport vlan scope local
switchport vlan scope local
Description: L2 configuration
Syntax:
scope
Local Scopelocal
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 869
S Commandsswitchport vlan
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport vlan scope local
switchport vlan scope local
Description:
Syntax:
scope
Local Scopelocal
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport vlan scope local
switchport vlan scope local
Description: L2 configuration
Syntax:
scope
Local Scopelocal
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport vlan scope local
switchport vlan scope local
Description:
Syntax:
scope
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)870
S Commandsswitchport vlan
Local Scopelocal
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport vlan scope local
switchport vlan scope local
Description:
Syntax:
scope
Local Scopelocal
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport vlan scope local
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 871
S Commandsswitchport vlan
switchport vsanswitchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Encapsulation vsan
Syntax:
VSAN Id. Number range from=1 to=4093vsan-id
Tenant Nametenant
Tenant hosting the EPg (Max Size 63)WORD
Application Nameapplication
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Encapsulation vsan
Syntax:
VSAN Id. Number range from=1 to=4093vsan-id
Tenant Nametenant
Tenant hosting the EPg (Max Size 63)WORD
Application Nameapplication
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)872
S Commandsswitchport vsan
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Encapsulation vsan
Syntax:
VSAN Id. Number range from=1 to=4093vsan-id
Tenant Nametenant
Tenant hosting the EPg (Max Size 63)WORD
Application Nameapplication
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc : Virtual Fiber Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Description: Encapsulation vsan
Syntax:
VSAN Id. Number range from=1 to=4093vsan-id
Tenant Nametenant
Tenant hosting the EPg (Max Size 63)WORD
Application Nameapplication
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 873
S Commandsswitchport vsan
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface vfc-po : VFC Port Channel interface
Command Path:
# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)874
S Commandsswitchport vsan
switchport vsan tenant applicationswitchport vsan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Description: Application Name
Syntax:
Access Vsan. Number range from=1 to=4094<1-4094>
Tenant hosting the AEPgtenant
Tenant hosting the AEPg (Max Size 63)WORD
Application Name (Max Size 64)WORD
EPg that uses the statically enabled Encapepg
EPg that uses the statically enabled Encap (Max Size 64)WORD
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport vsan <NUMBER> tenant <WORD> application <WORD> epg <WORD>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 875
S Commandsswitchport vsan tenant application
syslogsyslog common
Description: Syslog common policy configuration mode
Syntax:
Syslog common policy configuration modecommon
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# syslog common
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)876
S Commandssyslog
system cluster-sizesystem cluster-size <NUMBER>
Description: Set APIC cluster size
Syntax:
size of the cluster to be set. Number range from=1 to=16<size>
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system cluster-size <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 877
S Commandssystem cluster-size
system controller-idsystem controller-id <serial-number> approve|reject
Description: Configure Controller Id for controllers in fabric
Syntax:
Controller serial numberserial-number
Approve controllerapprove
Reject controllerreject
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system controller-id <serial-number> approve|reject
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)878
S Commandssystem controller-id
system dynamic-load-balancesystem dynamic-load-balance modelink-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization
Description: Configure dynamic load balancer
Syntax:
Dynamic load balancer modemode
Link failure resiliency modelink-failure-resiliency
Aggressive dynamic modedynamic-aggressive
Conservative dynamic modedynamic-conservative
Packet prioritization modepacket-prioritization
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system dynamic-load-balance modelink-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 879
S Commandssystem dynamic-load-balance
system fabric-security-modesystem fabric-security-mode <mode>
Description: Set strict/permissive mode for ACI Fabric Internode Authentication
Syntax:
Security mode as comma separated values like val1,val2,..valN<mode>
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system fabric-security-mode <mode>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)880
S Commandssystem fabric-security-mode
system jumbomtusystem jumbomtu <NUMBER>
Description:MTU size for Host Facing ports
Syntax:
Enter jumbomtu. Number range from=576 to=9000<576-9000>
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system jumbomtu <NUMBER>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 881
S Commandssystem jumbomtu
system podsystem pod <NUMBER> tep-pool <A.B.C.D/LEN>
Description: POD in the fabric
Syntax:
POD ID. Number range from=1 to=255<1-255>
Tunnel Endpoint IP Address Pooltep-pool
Unicast IP prefix and network mask length in format x.x.x.x/mA.B.C.D/LEN
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system pod <NUMBER> tep-pool <A.B.C.D/LEN>
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)882
S Commandssystem pod
system switch-idsystem switch-id <serial-number> <node-Id> <WORD> [pod <arg>] [role <arg>]
Description: Configure Node Id for switches in fabric
Syntax:
Switch serial number<serial-number>
Switch ID. Number range from=101 to=4000node-Id
Switch nameWORD
(Optional) Pod Id of the the node. Default value is 1. Number rangefrom=1 to=9
arg
(Optional) Type of Node - leaf or spine. Default is unspecifiedarg
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system switch-id <serial-number> <node-Id> <WORD> [pod <>] [role <>]
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 883
S Commandssystem switch-id
system use-infra-giposystem use-infra-gipo enable
Description:Multicast Group IP Policy Mode for Tunnel Outer Header
Syntax:
Multicast Group IP Policy Mode for Tunnel Outer Headerenable
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# system use-infra-gipo enable
Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)884
S Commandssystem use-infra-gipo
top related