rockwell 3x5 why analysis audio
Post on 06-Jul-2018
233 Views
Preview:
TRANSCRIPT
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
1/25
© 2014 Rockwell Collins.All rights reserved.
© 2014 Rockwell Collins.All rights reserved.
3375 Armar DriveMarion, Iowa 52302
319-398-7101www.iowaqc.org
3 Legged “5 Why”
Root Cause Analysis
Making Customers Central To All That We Do
April 24, 2014John Heise, CLSSMBB, CQM, Iowa Quality Center
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
2/25
© 2014 Rockwell Collins.All rights reserved.
3 Legged “5 Why” Root Cause Analysis Training
Course Objectives
• Understand the purpose of 3 legged “5 Why” (“3x5Why”) Root Cause Analysis
• Learn the basic components of a “3x5 Why”
• Develop the skills needed to perform a “3x5 Why”Analysis with confidence
I hear, I forget.
I see, I remember.
I do, I understand.
- Chinese Proverb
2
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
3/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis
What is it?
The “5 Why’s?” is the most basic form of Root Cause Analysis
Simple: Ask “why?” until you can’t ask “why?” anymore
Focused on a particular problem or effect: typically undesirable
“3x5 Why’s?”: an approach to determine all possible causesthat lead to the effect (issue)
Broken down into three key areas:
1. Direct Cause: The Immediate reason for the effect
2. Detectability: Reason nonconformity was not caught
3. Systemic Cause: Reason system allowed problem to occur
3
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
4/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis Example
When completed, can be very simple or quite involved.
It all depends on the complexity of the issue.
4
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
5/25
© 2014 Rockwell Collins.All rights reserved.
Defining Root Causes
When investigating effects and causes: Start with a description of the process issue.
May be multiple things working together, or
A “chain” of events
We refer to the key input issue, or issue starting the “chain of
events”, as the “Root Cause”
Key to success: good description of the “effect”
5
Effect
Cause 1 Cause 2 Cause 3
Effect
Cause 1
Cause 2
Cause 3
Key ause or
“Root ause”
Key ause or
“Root ause”
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
6/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis
When to use a “3x5 Why?”:
When people do not understand the issue
Need a better understanding of what is driving the issue
Need to identify possible causes
Need to investigate an issue quickly
6
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
7/25
© 2014 Rockwell Collins.All rights reserved.
When to use “3x5 Why?”:
When you can answer "Yes" to these questions:
1. Do root causes of a problem need to be identified?
Allows the quick identification of "why" an issue exists
2. Are there many ideas and/or opinions about the causes of a
problem? People have formed opinions of the potential cause(s)
Opinions may conflict or fail to identify the root cause
3. Need to know how the issue was allowed to happen?
How was the issue not caught by current quality systems?
What key work processes, procedures, etc. allowed the issue to bepresent?
7
Using a "3x5 Why" Analysis makes it possible to quicklycapture the key (root) causes of an issue for possible study
3x5 Why Root Cause Analysis
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
8/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis
Why use “3x5 Why?”:
Help prevent team from jumping to solution
To encourage people to use higher order thinking skills
To cut through the layers of bureaucracy to find the truereasons why an issue exists
To challenge current thinking and/or paradigms
To help people understand the root cause(s) of a problem
To help people clarify motivation for change
8
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
9/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis
Where can “3 by 5 Why?” Analysis be used: In situations requiring better understanding and/or knowledge
In manufacturing, investigating part defects or productiondowntime
In office work processes, understanding causes of issues orerrors
In markets or service operations, looking for causes ofcustomer complaints
With product issues or returns, looking for causes of failures orreduced performance
9
Are there areas of issues you can think ofthat you can apply the “3 by 5 Whys”?
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
10/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis Process
How is it made
1. Identify the problem to be studied
2. Assess the immediate reasons (Direct Cause) why the issueoccurred
3. As applicable for the issue, assess "Why?" the issue was notdetected (Detectability)
4. Using the "Direct Cause" & "Detectability" root causes, identifythe systemic cause(s) that allowed the issue to occur
5. Develop a "Theory of Improvement" (proposed solution) fromthe "5-Why's?" analysis
6. Assess the "Theory of Improvement" to ensure it will provide asound (permanent) solution
Let’s look at each step…
10
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
11/25
© 2014 Rockwell Collins.All rights reserved.
1. Identify the Problem What problem (effect) needs to be improved and/or
controlled?
Typically described by a failure mode or undesirable event
Description of the problem should be short and specific
Does not contain a proposed solution!
Example: Scratches or missing paint is being seen onbezel push-buttons received from supplier
Enter a clear description of the observed nonconformity in
the Problem Statement field.
11
Note: The causes will vary depending on the effect!
3x5 Why Process
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
12/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Process
2. Assess the immediate reasons why the issue occurredusing the Direct Cause leg.
Ask "Why?" does this condition or problem exist?
Example: Why do we have scratches and missing paint on bezel push-buttons?
Each time the question "Why?" is answered, ask "Why?" again
Continue to ask "Why?" until all are satisfied they are at the rootcause
Can give insight into what containment activities can be done
Often, we look for blame rather than causation – focus should be onthe system, not the individual
12
Asking "Why?" should not be a futile effort; refrain from doing thisfrivolously. Make sure everyone is making a serious effort to answer
the question "Why?".
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
13/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Process
Step 2 Example:
13
There can be multiple reasons (causes) why the issue exists.Start another leg if needed.
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
14/25
© 2014 Rockwell Collins.All rights reserved.
3. Next, as applicable for the defect/issue
occurrence, assess "Why?" the issue was notdetected using the Detectability leg.
Focus on the inspection and/or testing methods used in thework process.
Again, start by asking "Why?" did we not detect this issue or
error when it occurred?
14
3x5 Why Process
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
15/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Process
4. Using the root causes in the "Direct Cause" and"Detectability" legs, dive deeper into identifying theassociated systemic cause(s) that allowed the issue or
error to occur.
Record results in the "Systemic Cause" leg
Ask "Why?" current systems didn't do the right job the firsttime through to provide the customer what they wanted orexpected
15
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
16/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Process
5. Develop a "Theory of Improvement" (proposedsolution) from the chain of answers given to the "5-Why's?" analysis.
For each leg, identify corrective action needed to resolve
root cause(s) Record information in Corrective Action fields on the "3x5
Why's?" Template
16
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
17/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Process
6. Assess the "Theory of Improvement" to ensure it
will provide the sound (permanent) solution theteam, or organization, is looking for.
Great tools to use: the "If-Then" or Force Field Analysis.
When satisfied: attach completed 3x5 Why Template to 8D
Task (GC02 from the GENCA task group) in the ActionRequest (AR)
17
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
18/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Example
A completed “3x5 Why?” Analysis may look like this:
18
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
19/25
© 2014 Rockwell Collins.All rights reserved.
Multi-Leg 5 Why Example
This example shows just how spread out a “5-Why” can get:
19
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
20/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Best Practices
Things to Consider:
• Identify and verify the most likely causes
• If multiple root causes - consider using an InterrelationshipDiagram to identify true (driving) key root causes
• Root causes can and should be verified
– Collecting data and/or information on the work process, or
– Perform planned experiments
• Causes are verified in two ways:
1. The effect is present when the cause is present, or
2. When the cause isn't present, the effect doesn't exist
20
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
21/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Best Practices
Things to Consider (con’t):• Note: multiple causes can produce the same effect, or
• A root cause can produce multiple effects
• If multiple causes:
– Consider which causes are occurring the most (frequency and/ordowntime), or having the biggest impact ($ loss),
– Assess them using a Pareto diagram; take action first on the Top20% that are causing 80% of the effect
• The greatest success in improvement is achieved by identifying,verifying, and removing those causes that contribute the most
to producing the effect
21
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
22/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Best Practices
Getting the most out of your “3x5 Why?” Analysis:
• Pull together a good cross-functional team (4-8 people): peoplefrom the process, a subject matter expert, a supplier, thecustomer or customer representative, and someone “fresh” tothe process
• You can always do more than five whys, but try not to do lessthan five
• DO "all three legs": Direct Cause, Detectability, Systemic Cause
– 1st-pass: defining the immediate root cause
– 2nd-pass: understanding why inspection/test methods did not work
– 3rd-pass: what Systemic weakness or breakdown allowed theproblem to occur
22
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
23/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Best Practices
Getting the most (con’t):
• Just like the C&E Diagram, "3x5 Why's?" can be carried out onmany levels
– Primary analysis is done to find the most likely cause
– Use this most likely cause for the effect (or problem statement) fornext level "3x5 Why?" Analysis
• Mental blocks can occur when searching for root causes
– When this happens, “walk the process” to look for possible causes
• Keep in mind: the more levels - the better the results
– The true root causes may be hidden several levels below the more
easily identified causes
• Follow each use of the tool with a debriefing session
– Allow individuals the chance to share their learning’s with others
23
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
24/25
© 2014 Rockwell Collins.All rights reserved.
3x5 Why Root Cause Analysis Summary
A “3x5 Why’s?” Analysis is:
The most basic form of Root Cause Analysis
Focused on a particular undesirable problem or effect
An approach to determine all possible causes that lead to theeffect (issue)
“3x5 Why’s?” Analysis helps to:
1. Find the immediate reason (Direct Cause) for the effect
2. Find the reason the nonconformity was not caught(Detectability)
3. Find the reason system allowed problem to occur (SystemicCause)
4. Determine the best course of action to resolve the issue
24
-
8/17/2019 Rockwell 3x5 Why Analysis Audio
25/25
© 2014 Rockwell Collins.All rights reserved
Thank You
To learn more about Root Cause Analysis or other Quality Tools,contact:
Iowa Quality Center
3375 Armar Drive
Marion, Iowa 52302
(319) 398-7101
www.iowaqc.org
On Facebook at: Iowa Quality Center
25
http://www.iowaqc.org/http://www.iowaqc.org/
top related