pure ip pbx kx-tde600 mpr 2.00
Post on 31-Dec-2015
127 Views
Preview:
DESCRIPTION
TRANSCRIPT
Pure IP PBX KX-TDE600
MPR 2.00
Panasonic Communications CO.,LTD.
TDE600MPR 2.00TDE600MPR 2.00
“Pure IP-PBX KX-TDE SeriesProduct Line Up
TDE100/200MPR 2.00TDE100/200MPR 2.00
TDE100/200MPR 1.00TDE100/200MPR 1.00
TDE600 The same as TDE200 MPR 2.0/TDA600 MPR 5.0(MPR 2.0) New activation key.
Version Main FunctionTDE100/200 - Peer to Peer Communication(MPR 1.0) - KX-NT300 Series IP-PT
- SIP Phone CompatibleTDE100/200 - KX-TDA0177 (CSLC16)(MPR 2.0) - Improved Built-in SVM2
- KX-TDA0192/4 (ESVM)- 8 Digits VM Integration- Support T38 (ITU standard for sending FAX)
KX-TDE600 System Highlights “
Build - up system (Flexible system: same as TDA600) Inherent TDA600 MPR 5.0 Features. Inherent TDE100 MPR 2.0 Features. Easy upgrade from TDA600 to TDE600
(Change EMPR card to IPCEMPR card) TDA600 Hardware products compatible with TDE600. TDE100 Activation keys compatible with TDE600. CA (NCP) feature is not supported. TDE600 does not support build-in SVM. New activation key for TDE600. Support KX-NT3xx Series Support KX-DT3xx Series PA: TDE600 supports PA 1.8 only. (Do not use PA 1.7 or
early version.)
“
DLCDHLC
Router
VoIP/SIP
PCMC
TDE100/200 SeriesActivation Key
IPCEMPRDSP
DT300T7600
NT136NT300
NT300
TDA0470
MPR 2.0
TDA600 MPR 5.0 FeaturesTDE100 MPR 2.0 Features
KX-TDE600 System Highlights
KX-TDE600 Shelf
Difference from TDA620- Front cabinet
KX-TDE620
Expansion Shelf
KX-TDE600
Basic Shelf
Difference from TDA600- MPR Card- Front cabinet
“
KX-TDE600 Shelf (Build up)
Entry FullMedium-1 Medium-2
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE600 KX-TDE600KX-TDE600KX-TDE600
KX-TDE620KX-TDE620
KX-TDE620
The same concept as the TDA600
KX-TDE600 Shelf “
1 x Virtual Shelf
4 x Physical Shelf
The same as the TDA600
KX-TDE600 Virtual Slot “
4 x Virtual SlotExtension
4 x Virtual SlotTrunk
Total Max 8 x Virtual Slot
The same as TDE100/200.
KX-TDE600 Max. Slot “
TDE600 TDE600+
TDE620 x 1
TDE600+
TDE620 x 2
TDE600+
TDE620 x 3
System Max 18 29 40 51
Trunk Max 14 24 34 40
Physical Slot 10 20 30 40
Virtual Slot 4 4 4 4
Extension Max. 14 24 34 40
Physical Slot 10 20 30 40
Virtual Slot 4 4 4 4
Physical Slot 10 21 32 43
KX-TDE600 Terminals (Trunk) “
TDE600 TDA600
Trunk Max. 640 640
SIP G/W Virtual (MPR) 32 (2 x SIP G/W-16) -
Traditional 0 -
Max. 32 -
H.323
G/W
Virtual (MPR) 32 (2 x V-G/W-16) -
Traditional 640 (40 Slots) 640 (40 Slots)
Max. 640 640 (40 Slots)
LCOT/BRI
Traditional 640 (40 Slots) 640 (40 Slots)
PRI30/E1 Traditional 600 (20 Slots) 600 (20 Slots)
PRI23 Traditional 460 (20 Slots) 460 (20 Slots)
T1 Traditional 480 (20 Slots) 480 (20 Slots)
KX-TDE600 Terminals (Trunk) “
TDE600TDE600 +
TDE620 x1
TDE600 +
TDE620 x 2
TDE600 +
TDE620 x 3Trunk Max. 192 (*1) 352 (*2) 512 (*3) 640Virtual Max 32 32 32 32
SIP 32 32 32 32IP-G/W 32 32 32 32
Traditional Max. 160 320 480 640Analogue 160 320 480 640BRI 160 320 480 640PRI30/E1 150 300 450 600PRI23 115 230 345 460T1 120 240 360 480IP-G/W 160 320 480 640
(*1) 192: 160 (BRI x 10) + 32 (Virtual)(*2) 352: 320 (BRI x 20) + 32 (Virtual)(*3) 512: 480 (BRI x 30) + 32 (Virtual)
KX-TDE600 Terminals (Extension) “
TDE600 TDA600
Extension Max 1152640: TDA0172 x 20
128: SIP (32 x 4 Slot)384: TDA6178 x 16 Slot
1120
IP-PT
(MGCP)
Virtual (MPR) 64 (2 x V-IPExt-32) -
Traditional 640 (40 Slot) 640 (40 Slot)
Max. 672 640
SIP Ext. Virtual (MPR) 128 (4 x V-SIP-32) -
Traditional 0 -
Max. 128 -
PT Traditional 640 640
SLT Traditional 960 (40 Slots x SLC24) 960 (40 Slots x SLC24)
PS (w/o MEC / w/ MEC) 512/512 256/512
KX-TDE600 Terminals (Extension) “
TDE600TDE600+
TDE620 x1
TDE600+
TDE620x 2
TDE600+
TDE620x 3System Max. w/ DXDP 432 736 1008 1152
w/o DXDP 368 608 848 992Virtual Max 128 128 128 128
SIP 128 128 128 128IP-PT 64 64 64 64
Traditional Max. w/ DXDP 304 608 880 1120w/o DXDP 240 480 720 960
SLT Max 240 480 720 960PT Max. 256 512 640 640PT w/ DXDP 256 512 640 640PT w/o DXDP 160 320 480 640
IP-PT 160 320 480 640
CS 32 64 96 128
PS (w/o MEC/ w/ MEC) 512/512 512/512 512/512 512/512
“KX-TDE600 Compatibility
PRI (TDA0290)
BRI-4 (TDA0284)
BRI-8 (TDA0288)
CID (CO:TDA0193)
E1 (TDA0188)
ELCOT-16 (TDA6181)
Card
CID/PAY8 (TDA0189)
IP-GW4 (TDA0480)
IP-GW4E (TDA0484)
IP-GW16E (TDA0490)
Yes
Yes
Yes
Yes
Yes
Yes
TDA600
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TDE600
Yes
No
Yes
Yes
IPCMEC (TDE0105) Yes No
- Compatibility with TDA600 option cards. (Trunk/System)
EMEC (TDA6105) No Yes
Card TDA600
PSU-L (TDA0103)
Master-Sub (TDA6111)
Yes
Yes
TDE600
Yes
Yes
Bus-Master (TDA6110) YesYes
PSU-M (TDA0104) YesYes
TDE600 does not support.- LCOT-4 (TDA0183)- LCOT-8 (TDA0180)
“
CSLC-16 (TDA0177)
DHLC-8 (TDA0170)
SLC-8 (TDA0173)
DLC-16 (TDA0172)
Card
DLC-8 (TDA0171)
CS-I/F (TDA0144/0143)
TDE600
DPH-2 (TDA0162)
DPH-4 (TDA0161)
OPB-3 (TDA0190)
Yes
Yes
Yes
TDA600
Yes
Yes
Yes
Echo-16 (TDA6166)
CTI-LINK (TDA0410)
IP-Ext-16 (TDA0470)
MSG (TDA0191) Yes Yes
Remote (TDA0196) Yes Yes
Ext. CID (TDA0168)
- Compatibility with TDA600 option cards. (Extension)
ECMSLC-24 (TDA6178)
ESLC-16 (TDA6174)
EMSLC-16 (TDA6175)
Card
Yes
Yes
Yes
YesYes
Yes
Yes
Yes
Yes
YesYes
YesYesYes
YesNo (*1)
YesYes
YesYes
Yes
Yes
Yes
Yes
YesYes
TDA600 TDE600
E-SVM-4 (TDA0194) Yes Yes
E-SVM-2 (TDA0192) Yes Yes
*1: IPCEMPR Card has the CTI link port.
KX-TDE600 Compatibility
TDE600 does not support.- SLC-16 (TDA0174)- SLC-16 (TDA0175)- ECHO-16 (TDA0166)
“
- Compatibility with TDE100/200 Activation keys.
Feature Enhancement (NCS4950)
2-IP Trunk (NCS4102)New activation keys.
8-IP Soft-/IP-PT (NCS4208)
Activation key
No
No (*1)
Yes
Yes
Yes
Yes
TDE100 TDE600
KX-TDE600 Compatibility
Feature Enhancement (NCS4910) YesNo
4-IP Trunk (NCS4104) YesYes
1-IP Soft-/IP-PT (NCS4201) No (*1)Yes
8-IP-PT (NCS4508) YesYes
1-IP-PT (NCS4501) No (*1)Yes
16-SIP Phone (NCS4716) YesYes
1-SIP Phone (NCS4701) No (*1)Yes
*1: TDE100/200 MPR 2.01 will support.
“
- Compatibility with TDE100/200 options.
VoIP Encryption SD card (TDES61)
VoIP Encryption SD card (TDES01)
DSP-64 (TDE0111)
No
Yes
Yes
DSP-16 (TDE0110) Yes
TDE100 TDE600
Yes
No
Yes
Yes
KX-TDE600 Compatibility
“
All Activation products of TDE600
All Activation products of NCP
No
Yes
Yes
No
NCP TDE600
KX-TDE600 Compatibility
All Hardware of TDE600
All Hardware of NCP
No
Yes
Yes
No
- Compatibility with NCP500/1000
System Connection TDE600 & TDE620
TDE600
TDA6110 (BUS-M)
TDE600TDE600
TDE620/TDA620
TDE620/TDA620
Cable
Cable
Power unitLPR Cards
TDA6110 (BUS-M)
TDA6111(BUS-M-Sub)
TDA6111(BUS-M-Sub)
A cable is packed in BUS-M (TDA6110), BUS-M-Sub (TDA6111)
TDE620/TDA620TDE620/TDA620
TDA620 Software should be 2.000 or later.
Activation Key
“Activation Key- Issuing TDE600 activation key procedure is the same as TDE100/200.
URL: https://eww.netreg.panasonic.co.jp/kms/
KX-TDE6101 IPCEMPR KX-TDE0105 IPCMEC
“KX-TDE600 IPCEMPR (TDE6101)- KX-TDE6101: MPR card for TDA600.(KX-TDE600 has KX-TDE6101)
-KX-TDE0105 Memory Expansion Card for IPCEMPR
Build-in Memory Card
“KX-TDE0105 (IPCMEC) Feature
ItemsTDE600 MPR 2.0 TDA600 MPR 5.0
W/o TDE0105
W/TDE0105 W/o MEC W/MEC
4 Party Conference With Broadcasting.
Yes Yes No Yes
System Speed Dial1000/Tenant
x 321000/Tenant
x 321000/Tenant
1000/Tenant
x 32Station Speed Dial 100/Ext.
Yes Yes No Yes
Hotel-SMDR for check out.
4000 Calls 8000 Calls No 8000 Calls
SDMR buffer 1000 Calls 4000 Calls 1000 Calls 4000 Calls
Quick Dial 8Digit,
4000 entriesYes Yes Yes Yes
Max. Number of PS 512 512 256 512
The procedure detailed below is for your reference regarding the addition of a IPCMEC card to a previously installed TDE600.
1. Save the current system data from the TDE to the SD card2. Save the current system data from the SD card to your PC.3. Power off the TDE and remove the preinstalled MEC card.4. Install an IPCEMEC to the TDE.5. Power on with initial initializing steps.6. Connect the PCMC and initialize the TDE.7. Upload the system data to the TDE.
Procedure adding IPCMEC “
Note:When the preinstalled memory card is removed, all recorded SMDR data will be lost. Therefore, it is recommended to output the SMDR data before removing the preinstalled memory card.
Important
TDE600 Software
“TDE600 Software
TDE600 supports,TDA600 MPR 5.0 Features.
- KX-TDA0158 (8ch-CS)- KX-TDA6178 (24-SLT)- 8 digits VM integration- KX-TDA0192/4 (ESVM)- Moving From SVM to DISA- High Quality OGM Record to ESVM
TDE100 MPR 2.0 Feature.- T.38
“TDE600 Software
Modified/New Functions/Features
Modified/New Functions/Features
1 VM-Group Ext. number can be assigned as transfer re-call destination.
2 Intercept function performs an extension which set call forward to CO.
3 Auto recovery function for Busy-out (Analogue line).
4 Two CLIP on an Extension.
5 Check-OUT not ready mode (Hotel feature) is supported.
6 System error activates an external relay.
7 PRI CNIP with the name of extension.
“Software Enhancement Plan
TDE600 NCP500NCP1000 TDA30 TDA100
TDA200 TDA600 TDE100TDE200
Transfer re-call to VM-Group. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Intercept for Call-FWD to CO. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Busy-out Auto recovery function. 2.0 1.0 (5.0) (5.0) (?) (3.0)
Two CLIP on an Extension. 2.0 (?) (5.0) (5.0) (?) (3.0)
Check-OUT not ready mode. 2.0 1.0 (5.0) (5.0) (?) (3.0)
System error activates an external relay.
2.0 1.0 (5.0) (5.0) (?) (3.0)
PRI CNIP 2.0 1.0 N/A (5.0) (?) (3.0)
( ) = Planed MPR version
PCMC for TDE600
“PCMC for TDE600Please use U-PCMC Ver. 4
“PCMC for TDE600Now file
“PCMC for TDE600Connect
Upgrade TDA/TDE to TDE600
“Upgrade to TDE600Update from TDA600The following items are necessary for the upgrade:Model/Name Description
KX-TDE6101 (IPCEMPR)
IP Convergence Main Processing Card
The main processing card for controlling the Pure IP-PBX (KX-TDE600). This card comes with an SD Memory Card and 2 ferrite cores included.
KX-TDE0110 (DSP16)
16-Channel VoIP DSP Card
Digital signal processor (DSP) cards to be mounted on the IPCMPR/IPCEMPR card.
Depending on the number and the type of IP trunks and IP telephones you wish to use, either the DSP16 or DSP64 card is selected to be installed.
Note
The following activation keys are pre-installed:
4-Channel IP Trunk Activation Key: 1 for
DSP16; 4 for DSP64
8-Channel IP Proprietary Telephone Activation
Key: 1 for DSP16; 4 for DSP64
KX-TDE0111 (DSP64)
64-Channel VoIP DSP Card
“
We can upgrade from TDA100/200/600/TDE100/200 to TDE600.The origin PBX System data is only versions of TDA100/200 TDA600 (MPR 5.0xxx), TDE100/200 (MPR 2.0).
TDE600System Data
Upgrade to TDE600
TDA600 MPR 5.0TDE100/200 MPR 2.0
PCMCData Converter
System data converter (By PCMC)
“
Not PossibleTDA100/200 MPR x.x
TDA600 MPR 3.0TDE100/200 MPR 1.0
Upgrade to TDE600
TDA600 MPR 5.0TDE100/200 MPR 2.0
PCMCData Converter
Data Convert
PCMCData Converter
Upgrade from TDA100/200 MPR x.x, TDA600 MPR 1.0, TDE100/200 MPR 1.0 to TDE600.
TDE600System Data
“Upgrade to TDE600
TDE600 requirements
- SLC16 is converted to ESLC16 automatically. - MSLC16 is converted to EMSLC16 automatically. - LCOT16 is converted to ELCOT16 automatically.
The following card has to be removed and the card data has to be deleted before system data convert.- LCOT-4 (TDA0183)- LCOT-8 (TDA0180)- VoIP-4 (TDA0480)- ECHO-16 (TDA0166)- CTI Link card (TDA0410)- Any card in Slot 11
PCMC data convert conditions
- Card configuration of TDE600 should be same as TDA/TDE.- If the MEC card is installed in the TDA, IPCMEC should be install.
“
The TDA SD memory card (TDA30/100/200: 32M, TDA600:64M) used in the TDA cannot be used TDE600 (128M).
The SD memory card contains software for all the processes of the PBX and all the customer data. It can be easily removed and taken away from the PBX by a third party. Therefore, do not allow un-authorized access to prevent data leakage. To prevent data leakage, render the SD Memory Card physically unusable before disposal.
Upgrade to TDE600
Note:
“
• Incoming Call Log• Outgoing Call Log (including Last Number Redial)• Message Waiting• SMDR• Advice of Charge (AOC)/Pay Tone• Hospitality guest billing data• ICD Group monitor log for supervisor• PBX date and time• Timed Reminder• LPR Timed Update time• Daily test start time• PT handset/headset volume• PT SP-PHONE volume• PT ring volume• PT display contrast• ICD Group login status
Upgrade to TDE600
Data Reset After Upgrade
“
• ICD Group login status (All extensions are set to Login by default.)• ICD Group Ready/Not Ready status
(All extensions are set to Ready by default.)• Live Call Screening (LCS) On/Off• Hands-free Answerback status• Absent Message status of extensions
(Absent Message data itself is not cleared.)• FWD/DND status
(FWD destinations are not cleared.)• Extension Lock/Remote Extension Lock• Extension PIN Lock/Extension PIN Lock counter• Verified Code PIN Lock/Verified Code PIN Lock counter• Password Lock counter for Remote System Programming• PBX Error Log• Digital Trunk Error Report data
Upgrade to TDE600
Upgrade Steps
“
1- Back up the current system data.2- Back up the current OGM files3- Open the current system data by batch mode.4- Delete the following card from the system data
- LCOT-4 (TDA0183)- LCOT-8 (TDA0180)
- VoIP-4 (TDA0480) - ECHO-16 (TDA0166) - CTI Link card (TDA0410) - Any card in Slot 11
5- Save the system data.
Upgrade to TDE600
This steps is operated by the PCMC, but PCC recommends this step by manually.
“
6- Convert the saved system data file for use with the TDE600.
Upgrade to TDE600
6.1- Open U-PCMC 4.0.
6.4- Select “By file”
6.3- Select “PBX”- TDA600 → TDE600- TDE100/200 → TDE600
6.5- Click “Next”
6.2- Click
“Upgrade to TDE600
6.6- Select source file (TDA600 MPR 5.0 or TDE100/200 MPR 2.0) and click “OK”
6.7- Select destination file and click “OK”The source file is automatically converted the TDE600 system data.
7- Set up a new TDE600, or TDA600[TDA600]Remove the current MPR card from the TDA600 and Install the IPCEMPR Card with either the DSP16/DSP64 Card mounted, in the TDA600.
8- Slide the System Initialize Switch to the "SYSTEM INITIALIZE" position.
9- Turn on the power to the PBX.10- Connect the U-PCMC to the TDE600.11- Quick set up.12- Transfer the converted TDE600 data to the TDE by U-PCMC.
“Upgrade to TDE60013- Activate the user DGSYS from the PC.
Select “Utility” - ”System Reset” - “Reset by the Command”.
13.1- Select
Important
13.2- Click “OK”
“
[ Final settings ]TDA Flash ROM- PGMPR 2.0- DGSYS (2.0 User)
SD Card- PGMPR 2.0
- DGSYS (2.0 User)- DGSYS_SUB (2.0)
MPR.2.0
Upgrade to TDE600
Upgrade Steps(TDA620 to TDE620)
“Upgrade from TDA620 to TDE620 -11- Check the present BUS-S software version.
Should be 2.0xx
“
2- Transfer the BUS-S software (2.0xx) to the SD card.
pbuss_v02xx.bin
Upgrade from TDA620 to TDE620 -2
SD Card- PGMPR 2.0- DGSYS (2.0 User)- PBUSS 2.0
MPR.2.0
“
Click to “OUS”
3- Set the TDA620 to “OUS” mode.
Upgrade from TDA620 to TDE620 -3
“
4-2 Click
4- Transfer the BUS-S software (2.0xx) to the TDA620.
4-1 Select
4-3 Select
4-4 Click
Upgrade from TDA620 to TDE620 -4
“
4-5 Click
4-6 Click
Present Software version
Upgrade from TDA620 to TDE620 -5
“
Click “OUS”
4-7 Click
4-8 Click
Upgrade from TDA620 to TDE620 -6
“
4-9 Click
Upgrade from TDA620 to TDE620 -7
“
5- Set the TDA620 to “INS” mode.
Click to “INS”
Upgrade from TDA620 to TDE620 -8
“
6- Check the present BUS-S software version.
Should be 2.0xx
Upgrade from TDA620 to TDE620 -9
Thank you very much !
top related