pur-temadag, 30. maj - asger milborg (logstor)
Post on 22-Jan-2015
409 Views
Preview:
DESCRIPTION
TRANSCRIPT
Industry presentationPolyurethane Symposium 30th May 2013
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
1.
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
ContentLOGSTOR Group
03-06-2013 IMEL/Template.ppt
Some facts about the LOGSTOR Group
• Headquarter in Løgstør, Denmark
• Established in 1960• Turnover of € 300 mio. • 1.600 employees• The global leader and
specialist in pre-insulatedpipe systems!
• Owned by
Our vision is to make the optimal insulation of pipe systems available, everywhere!
03-06-2013 IMEL/Template.ppt
Some facts about the LOGSTOR Group
Production- and sales companySales company
03-06-2013 IMEL/Template.ppt
Annual manufacturing volumes
• 14.000 km pre-insulated pipes!
– 25.000 tons HDPE jacket pipes
– 18.000 tons PUR insulation
– 1 mio. pcs. heat shrinkable sleeves
03-06-2013 IMEL/Template.ppt
Environmental concern
• Logstor aims to develop environment friendly products and energy saving production methods!
– no Freon– continuous production
methods– recycling facilities
03-06-2013 IMEL/Template.ppt
The business areas
DistrictHeating
Industry
Districtcooling Oil & Gas
Marine
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
Some facts about LOGSTOR Industry
• Established in 1992• Production in Denmark• 35 employees• Local representation in
– UK– Germany– Sweden– Benelux– Turkey– and in many other European
countries through District Heating sales companies
• World wide export!
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
The concept
Carrier pipe to client specification or delivered by the client!
Carrier pipe• Carbon steel• Stainless steel• Plastic• Copper etc.
Insulation• Polyurethane foam (PUR)
Jacket pipe• High Density Polyethylene (HDPE)• Spiro jacket (galvanized, aluzinc, SS etc.)
03-06-2013 IMEL/Template.ppt
Carrier pipe
• Supplied standard lengths of 6 or 12 m– or according to client specification
• Standard steel pipes from DN15 to DN1200• The pipes are supplied with 150 mm. exposed ends as standard• The medium decides the carrier pipe material
Typical applications Steam Dom. water Brine NH3
Petr. Prod. Oil Glycol
Carbon steel + + + + +
Stainless steel + + + +
Plastic (PEX, HDPE) + + + + +
Cu (hard/soft) +
03-06-2013 IMEL/Template.ppt
Insulation
• Polyurethane foam (PUR)– Made of polyol and
isocyanate– Free of chlorides!
• 5 series of insulation to meet all technical and economical demands!
– The choice of a thicker insulation can be advantageous in the long run...
• It meets the requirements of EN253
03-06-2013 IMEL/Template.ppt
Insulation
• Density: min. 60 kg/m3
• Cell structure: min. 88% closed cells
• Compressive strength 10% deformation: min. 0,3 N/mm2
• A low heat conductivity:– 0,027 W/mK (+50°C)– 0,022 W/mK (-20°C)
• For normal applications, the pipe assembly should have a life of at least 30 years!
Low heat conductivity in unaged conditions...
03-06-2013 IMEL/Template.ppt
Jacket pipe
• HDPE in black or white– 100% watertight!– Impact resistant– Salt and chemical resistant– Hygienic– Anti-corrosive– The black HDPE is UV
resistant • The HDPE is approved to fire
classification NT fire 036 (classification 3)
03-06-2013 IMEL/Template.ppt
Hygienic design
• The smooth surfaces of both pipes and joints are just as easy to clean as a stainless steel surface
• The HDPE tolerates cleaning with high pressure jets!
03-06-2013 IMEL/Template.ppt
Intelligent pipes
Alarm wires for moisturedetection. Resistance or impedance
Leak detection for Oils and chemicals
Heat tracer for frost protection or heat maintenance
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
Pipe production - traditional
1. The foam is injected
2. The PUR foam expands to fill the pipe
3. After trimming the ends...
4. It is finished!
03-06-2013 IMEL/Template.ppt
Pipe production – traditional
LOGSTOR invented it in 1960...!
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
Product range
The 3 systems
Low temperature (LT) ÷200°C - ÷60°C
Normal temperature (NT) ÷60°C - +140°C
High temperature (HT) +140°C - +250°C
03-06-2013 IMEL/Template.ppt
Low Temperature System
• Operating temperatures– from -200°C to -60°C
• Insulation serie 5• Only freely suspended
systems• The system is applicable for
media such as:– Liquid nitrogen, liquid argon,
liquid oxygen etc.
03-06-2013 IMEL/Template.ppt
Normal Temperature System
• Operating temperature– from -60°C to +140°C
• Insulation serie 1-4• Freely suspended or directly
buried systems• The system is applicable for
media such as:– Ammonia, glycol, food &
beverage products, condensate, oil etc.
03-06-2013 IMEL/Template.ppt
High Temperature System
• Operating temperature– from +140°C to +250°C
• Freely suspended or directly buried systems
• The system is applicable for media such as:
– hot water, hot oil, steam etc.etc
03-06-2013 IMEL/Template.ppt
High Temperature System
• The insulation consists of a combination of PUR foam and mineral wool
• The insulation system is supplied in 2 standard versions
– For medium temperatures of max. +210°C and max. +250°C
Mineral wool
PUR foam
03-06-2013 IMEL/Template.ppt
Above ground systems
• The pipe design is a bonded system
• It is supported outside the coating
– no thermal bridges!• It is robust and may be used
as walkways• Space saving solution in e.g.
pipe racks
Why insulate afterwards, when you can do it much better upfront?
03-06-2013 IMEL/Template.ppt
Underground systems
• It is water and diffusion tight!• It is robust• The jacket pipes are held in
place by soil friction• Don’t necessite a cement wall
trench
03-06-2013 IMEL/Template.ppt
Underground systems
• Any movement caused by temperature change is absorbed within the system itself!
• The movements are absorbed by expansion-absorbing elements
– i.e. L, Z or U bends and axial compensators
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
Fittings and joints
Solution 1• Pre-insulated pipes and fittings
Solution 2• Pre-insulated pipes and heat shrinkable joints
03-06-2013 IMEL/Template.ppt
Flexible joints with half-shells
Straight joints0 - 15O
Dim. ø90–630 mm.
Bend joints15 - 90O
Dim. ø90–315 mm.
T-jointsMain pipe dim. ø90–450 mm.Branch pipe dim. ø66-180 mm.
03-06-2013 IMEL/Template.ppt
The sleeves
• Cross-linked Polyethylene (PEX)
• They are remarkably flexible and bendable!
• They are 100% water tight!• They have the same
mechanical strength as the rest of the pipe system
• They tolerate over heating, does not stress crack and stress release
It’s unique LOGSTOR technology!
03-06-2013 IMEL/Template.ppt
Installing the flexible joints
03-06-2013 IMEL/Template.ppt
Installing the flexible joints
03-06-2013 IMEL/Template.ppt
Pre-insulated fittings
• Everything is possible!– Bends, Tee´s, anchors,
valves, spools and customer designs
• They are watertight and robust
• Continuous jackets without penetrations
• Simple and quick installation on site!
03-06-2013 IMEL/Template.ppt
Pipe supports
• The type depends on the pipe layout
• Available in electroplated or stainless steel
• The support is fixed on the jacket - no thermal bridges!
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
How to optimize the investment?
1. LOGSTOR Group
2. LOGSTOR Industry
3. The concept
4. Pipe production
5. The product range
6. Installation
7. StaTec
8. Summary
Content
03-06-2013 IMEL/Template.ppt
10 good reasons
1. Outstanding insulation quality!• heat loss is up to 40% less
than in a corresponding system with traditional insulation
2. Supports are fitted outside the casing• no thermal bridges
3. 100% water tight!4. Effective corrosion
resistance5. High level of hygiene
03-06-2013 IMEL/Template.ppt
10 good reasons
6. High mechanical strength• you may walk on it!
7. Reduced installing costs• quick installation of pre-
insulated pipes8. Minimal maintenance costs9. Low operating costs throughout
the lifetime of the pipe system10.Jackets in black or white HDPE
• the black is UV resistant
03-06-2013 IMEL/Template.ppt
Visit us at logstor.com
top related