promet sa 2 our products roofing nails common nails screw shank nails ring shank nails plastic...

PROMET SA

2

Our Products• Roofing nails• Common nails• Screw shank nails• Ring shank nails• Plastic collated smooth shank

nails and ring shank nails• Certificated epal nails

Coating: 3 methods

Thermo diffusion Zinc Coating

Hot Dip Zinc CoatingElectrogalvanizing

Thermo Ddiffusion Zinc Coating

We have started also apply Thermo Diffussion

Zinc Coating.

Features:• High corrosion resistance - Up to 1000 hours in a salt

mist chamber, excellent for marine applications. • Environmental friendly - Dry process, chromate free, and

does not contain toxic elements and fully ecologically clean. • No pre-treatment required - oily, greasy and 40% rusty

surfaces can be coated with no pre-treatment. • Working temperature - 450oC • Passivity - provides excellent free-air conservation, with

non-toxic materials. • Strong adhesive coating - no peeling or cracking. • High abrasion resistance - micro-hardness up to 1636

HV, prevents nut seizure in stainless steel bolts. • Uniform coating - even on tubes and internal surfaces. • Thickness of coating - 15-120µ, 50% under surface and

50% over surface layer. • No Zinc build-up - no grinding of excess zinc. • Low diffusion temperature - 360-450oC • Steel annealing could be part of galvanizing process for

extra saving. • Excellent base for paint or rubber bonding - no

profiling, high spots removal, roughening or primer required.

Hot Dip Zinc Coating Our nails are submitted hot dip

zinc coating, which is good technique against steel

corrosion. Zinc coated elements do not corrode for approximately 50 years while paint coating lasts

maximum 10 years.

Roofing nails

Type*

30x4030x2530x30

* We could also produce nails of various dimensions on the special order

Common nailsType*

25x6028x65 - 7030x70-9035x70-9040x100 -

11545x12550x15060x180

70x200 - 300* We could also produce nails of various dimensions on the special order

Screw shank nails

Type*28x50 –

6028x70 -

8031x50 –

6031x70-8033x50 –

6033x70-9040x100-

120

* We could also produce nails of various dimensions on the special order

Pallet nailsType*

RING SHANK34x7034x9029x40

SMOOTH SHANK28x5525x55

25x55 S

* We could also produce nails of various dimensions on the special order

Ring Shank NailsType*

25x50-7028x60 – 80

30x4030x50-6030x70-90

35x70 – 9038x70-90

40x100 – 11545x125

•We could also produce nails of various dimensions on the special order

Plastic collated smooth shank nails and ring shank

nailsType*

28x5028x6028x6528x7028x7528x8031x6031x7031x8031x90

31x100•We could also produce nails of various dimensions

on the special order

Nails are connected at an angle of 17° and 21°

Contact:PROMET SA

1 Maja Street 1227-200 Starachowice

Poland

Localization in Starachowice

Phone:Telephon number: 0048/(0)41 273 70 51

Fax: 0048/(0) 41 273 57 75www.prometsa.com.pl

E - mail

a.tatarek@prometsa.com.pl

THANK YOU