production quality assurance certificate engb_tcm162-73994.pdf · production quality assurance...
Post on 25-May-2020
15 Views
Preview:
TRANSCRIPT
Page 1 of 2
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-D1-EN/2018-39
PRODUCTION QUALITY
ASSURANCE CERTIFICATE Certificate No.:
18-PED-ROT-D1-16.Z0553830-03 EN
This certificate consists of 2 pages
Initial date:
2010-06-10
Valid from/until:
2018-12-31 – 2021-12-31
This is to certify that the quality system of
Linde Gas Benelux B.V. Havenstraat 1, Schiedam, the Netherlands
has been assessed and found to comply with respect to the conformity assessment
procedure described in:
ANNEX III MODULE D1 OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure Assemblies for Liquid gas
storage and distribution
Scope/Product Name Fabrication and final inspection of
pressure assemblies for industrial and medical gases
In Combination with a valid quality system certificate according
NEN-EN-ISO-9001:2015
Place and date:
Barendrecht, 14 January 2019
For EU-Conformity Assessment Body 2388:
DNV GL Business Assurance B.V.
_________________________________
D.P. Koek DNV GL Representative
Page 2 of 2
Certificate No.: 18-PED-ROT-D1-16.Z0553830-03 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10 2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-D1-EN/2018-39
Jurisdiction
Application of the Council Directive 2014/68/EU of 15 May 2014 on Pressure Equipment and Warenwetbesluit
Drukapparatuur 2014 (NL) and amendments. EU-conformity assessment body 2388. Beschikking 2018-0000151843.
By virtue of the Dutch General Administrative Law “Algemene wet bestuursrecht (Awb)” interested parties may issue
an objection to this decision. The period for application of an objection shall be within six weeks after publishing the
decision and shall be applied at DNV GL Business Assurance B.V. In the objection it shall be motivated why the made
decision is not correct. We request you to add a copy of the disputed decision and other documents to the objection.
Certificate history
Revision Description Issue date
10-PED-ROT-H1-10.017724-01
12-PED-ROT-H1-12.055337-01
16-PED-ROT-D1-15.A0247763-03
16-PED-ROT-D1-15.A0247763-03, R1
18-PED-ROT-16.Z0553830-03
Certification by DNV, PED 97/23/EC, Module D1
Re-certification
Re-certification PED 97/23/EC, Module D1
Revision DNV GL entity, PED 2014/68/EU, Module D1
Re-Certification
2010-05-03
2012-12-20
2016-01-06
2016-07-19
2018-12-31
The quality management system of Linde Gas Benelux was in the periode 2004 u/i 2010 certified by Lloyds Register Notified Body
0343 and in 2010, until certification by DNV GL, by Lloyds Register Notified body 0038.
Products covered by this certificate
Product name Product description Type of material Applied product standard
Assemblies Pressure assemblies for the
storage, gasification and
distribution of liquid gases for
medical and industrial applications
Austenitic Stainless Steels,
Carbon steels and copper
EN 13458-1/-2 EN 14276-2
EN 13648-3
EN ISO 21009-2
Sites covered by this certificate
Site name Site Address Audited by Date Report ref
Schiedam Havenstraat 1, Schiedam,
The Netherlands
Chr. van den Berg 2018-10-12/16 ROT 16.Z0553830.20
Certified ISO 9001 quality system
Site name Standard Certificate number Valid until Issued by
Schiedam ISO 9001:2015 276012-2018-AQ-NLD-RvA 2021-12-31 DNV GL Business Assurance B.V.
Applications/limitations
- None
Terms and conditions for the certificate
1. This certificate will become invalid as soon as the referenced ISO 9001 quality system certificate becomes invalid
2. The system approval is only valid for the equipment listed, and for similar equipment employing equivalent design and manufacturing processes and principles. For other equipment, an application for extension of the certificate must be sent to DNV GL Business Assurance B.V.
3. DNV GL has to be informed in advance of any subcontracted activities 4. The manufacturer shall inform DNV GL of the intended schedule of production for pressure equipment
covered by this certificate 5. Periodical audits and unexpected visits will be held, in order to verify that the manufacturer and his
subcontractor duly fulfil the obligations arising out of the approved quality system 6. The Manufacturer must give information of any intended adjustments of the Quality System to DNV GL, who
will assess the changes and decide if the certificate remains valid 7. Manufacturer shall keep an up-to-date log of all manufactured pressure equipment with CE-marking
according Directive 2014/68/EU, which will be traceable to the equipment 8. The manufacturer complies with the Council Directive 2014/68/EU on Pressure Equipment and is allowed to
affix the CE Mark followed by the DNV GL identification number 2388.
END OF CERTIFICATE
Page 1 of 3
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-D-EN/2018-39
PRODUCTION QUALITY
ASSURANCE CERTIFICATE Certificate No.:
18-PED-ROT-D-16.Z0553830-06 EN
This certificate consists of 3 pages
Initial date:
2010-06-10
Valid from/until:
2018-12-31 – 2021-12-31
This is to certify that the quality system of
Linde Gas Benelux B.V. Havenstraat 1, Schiedam, The Netherlands
has been assessed and found to comply with respect to the conformity assessment
procedure described in
ANNEX III MODULE D OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure Assemblies for Liquid gas
storage and distribution
Scope/Product Name Fabrication and final inspection of
pressure assemblies for industrial and medical gases
In Combination with a valid quality system certificate according
NEN-EN-ISO-9001:2015
Place and date:
Barendrecht, 14 January 20189
For EU-Conformity Assessment Body 2388:
DNV GL Business Assurance B.V.
_________________________________
D.P. Koek DNV GL Representative
Page 2 of 3
Certificate No.: 18-PED-ROT-D-16.Z0553830-06 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-D-EN/2018-39
Jurisdiction
Application of the Council Directive 2014/68/EU of 15 May 2014 on Pressure Equipment and Warenwetbesluit
Drukapparatuur 2016 (NL) and amendments. EU-conformity assessment body 2388. Beschikking 2018-0000151843.
By virtue of the Dutch General Administrative Law “Algemene wet bestuursrecht (Awb)” interested parties may issue
an objection to this decision. The period for application of an objection shall be within six weeks after publishing the
decision and shall be applied at DNV GL Business Assurance B.V. In the objection it shall be motivated why the made
decision is not correct. We request you to add a copy of the disputed decision and other documents to the objection.
Certificate history
Revision Description Issue date
10-PED-ROT-H1-10.017724-01
12-PED-ROT-H1-12.055337-01
17-PED-ROT-D-16.A0247763-06
18-PED-ROT-H1-16.Z0553830-01
Certification by DNV, PED 97/23/EC, Module H1
Re-certification
Certif¡cate, re-issued after issue PED module B-PT certificates
Re-Certification
2010-05-03
2012-12-20
2017-01-04
2018-12-31
The quality management system of Linde Gas Benelux was in the period 2004 u/i 2010 certified by Lloyds Register Notified Body
0343 and in 2010, until certification by DNV GL, by Lloyds Register Notified body 0038.
This approved system is only valid for products covered by a Module B EU-Type Examination
– Production Type and/or Module B EU-Type Examination – Design Type
Certificate reference (EU Type Examination)
Certificate No. Expiry date Issued by CAB No.
16-PED-ROT-B-PT-16.Z0549817-01 16-PED-ROT-B-PT-16.Z0549817-02
2026-12-15 2026-12-15
2388 2388
Products covered by this certificate
Product name Product description Type of material Applied product standard
Assemblies Pressure assemblies for the
storage, gasification and
distribution of liquid gases for
medical and industrial applications
Austenitic Stainless Steels,
Carbon steels and copper
EN 13458-1/-2 EN 14276-2
EN 13648-3
EN ISO 21009-2
Sites covered by this certificate
Site name Site Address Audited by Date Report ref
Schiedam Havenstraat 1, Schiedam,
The Netherlands
Chr. van den Berg 2018-10-12/16 ROT 16.Z0553830.20
Certified ISO 9001 quality system
Site name Standard Certificate number Valid until Issued by
Schiedam ISO 9001:2015 276012-2018-AQ-NLD-RvA 2021-12-31 DNV GL Business Assurance B.V.
Applications/limitations
- None
Terms and conditions for the certificate
1. This certificate will become invalid as soon as the referenced ISO 9001 quality system certificate becomes invalid
2. The system approval is only valid for the equipment listed, and for similar equipment employing equivalent design and manufacturing processes and principles. For other equipment, an application for extension of the certificate must be sent to DNV GL Business Assurance B.V.
3. DNV GL has to be informed in advance of any subcontracted activities 4. The manufacturer shall inform DNV-GL of the intended schedule of production for pressure equipment
covered by this certificate
Page 3 of 3
Certificate No.: 18-PED-ROT-D-16.Z0553830-06 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-D-EN/2018-39
5. Periodical audits and unexpected visits will be held, in order to verify that the manufacturer and his subcontractor duly fulfil the obligations arising out of the approved quality system
6. The Manufacturer must give information of any intended adjustments of the Quality System to DNV GL, who will assess the changes and decide if the certificate remains valid
7. Manufacturer shall keep an up-to-date log of all manufactured pressure equipment with CE-marking according Directive 2014/68/EU, which will be traceable to the equipment
8. The manufacturer complies with the Council Directive 2014/68/EU on Pressure Equipment and is allowed to affix the CE Mark followed by the DNV GL identification number 2388.
END OF CERTIFICATE
Page 1 of 3
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H1-EN/2018-39
FULL QUALITY
ASSURANCE CERTIFICATE Certificate No.:
18-PED-ROT-H1-16.Z0553830-01 EN
This certificate consists of 3 pages
Initial date:
2010-06-10
Valid from/until:
2018-12-31 – 2021-12-31
This is to certify that the quality system of
Linde Gas Benelux B.V. Havenstraat 1, Schiedam, The Netherlands
has been assessed and found to comply with respect to the conformity assessment
procedure described in
ANNEX III MODULE H1 OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure Assemblies for Liquid gas
storage and distribution
Scope/Product Name Design, fabrication and final inspection of pressure assemblies for industrial and
medical gases
In Combination with a valid quality
system certificate according
NEN-EN-ISO-9001:2015
Place and date:
Barendrecht, 14 January 2019
For EU-Conformity Assessment Body 2388:
DNV GL Business Assurance B.V.
_______________________________________
D.P. Koek DNV GL Representative
Page 2 of 3
Certificate No.: 18-PED-ROT-H1-16.Z0553830-01 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H1-EN/2018-39
Jurisdiction
Application of the Council Directive 2014/68/EU of 15 May 2014 on Pressure Equipment and Warenwetbesluit
Drukapparatuur 2014 (NL) and amendments. EU-conformity assessment body 2388. Beschikking 2018-0000151843.
By virtue of the Dutch General Administrative Law “Algemene wet bestuursrecht (Awb)” interested parties may issue
an objection to this decision. The period for application of an objection shall be within six weeks after publishing the
decision and shall be applied at DNV GL Business Assurance B.V. In the objection it shall be motivated why the made
decision is not correct. We request you to add a copy of the disputed decision and other documents to the objection.
Certificate history
Revision Description Issue date
10-PED-ROT-H1-10.017724-01
12-PED-ROT-H1-12.055337-01
16-PED-ROT-H1-15.A0247763-01
16-PED-ROT-H1-15.A0247763-01, R1
18-PED-ROT-H1-16.Z0553830-01
Certification by DNV, PED 97/23/EC, Module H1
Re-certification
Re-certification PED 97/23/EC, Module H1
Revision DNV GL entity, PED 2014/68/EU, Module H1
Re-Certification
2010-05-03
2012-12-20
2016-01-06
2016-07-19
2018-12-31
The quality management system of Linde Gas Benelux was in the period 2004 u/i 2010 certified by Lloyds Register Notified Body
0343 and in 2010, until certification by DNV GL, by Lloyds Register Notified body 0038.
Products covered by this certificate
Product name Product description Type of material Applied product standard
Assemblies Pressure assemblies for the storage,
gasification and distribution of liquid
gases for medical and industrial
applications
Austenitic Stainless
Steels, Carbon steels
and copper
EN 13458-1/-2 EN 14276-2
EN 13648-3
EN ISO 21009-2
This approved system is only valid for products covered by a Module H1 Design Examination
Certificate
Sites covered by this certificate
Site name Site Address Audited by Date Report ref
Schiedam Havenstraat 1, Schiedam,
The Netherlands
Chr. van den Berg 2018-10-12/16 ROT 16.Z0553830.20
Certified ISO 9001 quality system
Site name Standard Certificate number Valid until Issued by
Schiedam ISO 9001:2015 276012-2018-AQ-NLD-RvA 2021-12-31 DNV GL Business Assurance B.V.
Applications/limitations
- None
Terms and conditions for the certificate 1. This certificate will become invalid as soon as the referenced ISO 9001 quality system certificate becomes invalid
2. The system approval is only valid for the equipment listed, and for similar equipment employing equivalent design and manufacturing processes and principles. For other equipment, an application for extension of the certificate must be sent to
DNV GL Business Assurance B.V.
3. DNV GL has to be informed in advance of any subcontracted activities
4. The manufacturer shall inform DNV-GL of the intended schedule of production for pressure equipment covered by this
certificate
5. Periodical audits and unexpected visits will be held, in order to verify that the manufacturer and his subcontractor duly fulfil
the obligations arising out of the approved quality system
6. The Manufacturer must give information of any intended adjustments of the Quality System to DNV GL, who will assess the
changes and decide if the certificate remains valid
7. Pressure equipment covered by this certificate must be subject to Design Examination by DNV GL Business Assurance B.V. 8. Manufacturer shall keep an up-to-date log of all manufactured pressure equipment with CE-marking according Directive
2014/68/EU, which will be traceable to the equipment
9. The manufacturer complies with the Council Directive 2014/68/EU on Pressure Equipment and is allowed to affix the CE
Mark followed by the DNV GL identification number 2388.
Page 3 of 3
Certificate No.: 18-PED-ROT-H1-16.Z0553830-01 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H1-EN/2018-39
END OF CERTIFICATE
Page 1 of 3
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H-EN/2018-39
FULL QUALITY
ASSURANCE CERTIFICATE Certificate No.:
18-PED-ROT-H-16.Z0553830-02 EN
This certificate consists of 3 pages
Initial date:
2010-06-10
Valid from/until:
2018-12-31 – 2021-12-31
This is to certify that the quality system of
Linde Gas Benelux B.V. Havenstraat 1, Schiedam, The Netherlands
has been assessed and found to comply with respect to the conformity assessment
procedure described in:
ANNEX III MODULE H OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure equipment and -assemblies for liquid gas storage and distribution
Scope/Product name Design, fabrication and final inspection of pressure equipment and –assemblies
for industrial and medical gases
In Combination with a valid quality system certificate according
NEN-EN-ISO-9001:2015
Place and date:
Barendrecht, 14 January 2019
For EU-Conformity Assessment Body 2388:
DNV GL Business Assurance B.V.
_______________________________________
D.P. Koek DNV GL Representative
Page 2 of 3
Certificate No.: 18-PED-ROT-H-16.Z0553830-02 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H-EN/2018-39
Jurisdiction
Application of the Council Directive 2014/68/EU of 15 May 2014 on Pressure Equipment and Warenwetbesluit
Drukapparatuur 2016 (NL) and amendments. EU-conformity assessment body 2388. Beschikking 2018-0000151843.
By virtue of the Dutch General Administrative Law “Algemene wet bestuursrecht (Awb)” interested parties may issue
an objection to this decision. The period for application of an objection shall be within six weeks after publishing the
decision and shall be applied at DNV GL Business Assurance B.V. In the objection it shall be motivated why the made
decision is not correct. We request you to add a copy of the disputed decision and other documents to the objection.
Certificate history
Revision Description Issue date
10-PED-ROT-H1-10.017724-01
12-PED-ROT-H1-12.055337-01 16-PED-ROT-H-15.A0247763-02
16-PED-ROT-H-15.A0247763-02, R1
18-PED-ROT-H-16.Z0553830-02
Certification by DNV, PED 97/23/EC, Module H
Re-certification
Re-certification PED 97/23/EC, Module H
Revision DNV GL entity, PED 2014/68/EU,
Module H
Re-Certification
2010-05-03
2012-12-20
2016-01-06
2016-07-19
2018-12-31
The quality management system of Linde Gas Benelux was in the periode 2004 u/i 2010 certified by Lloyds Register Notified Body
0343 and in 2010, until certification by DNV GL, by Lloyds Register Notified body 0038.
Products covered by this certificate
Product name Product description Type of material Applied product standard
Assemblies Pressure assemblies for the storage,
gasification and distribution of liquid
gases for medical and industrial
applications
Austenitic Stainless
Steels, Carbon steels
and copper (for piping)
EN 13458-1/-2 EN 14276-2 EN 13648-3
EN ISO 21009-2
Pressure Piping Interconnecting piping EN 13480-1/-2/-3/-4/-5/-6
Sites covered by this certificate
Site name Site Address Audited by Date Report ref
Schiedam Havenstraat 1, Schiedam,
The Netherlands
Chr. van den Berg 2018-10-12/16 ROT 16.Z0553830.20
Certified ISO 9001 quality system
Site name Standard Certificate number Valid until Issued by
Schiedam ISO 9001:2015 276012-2018-AQ-NLD-RvA 2021-12-31 DNV GL – Business Assurance B.V.
Applications/limitations
- None
Terms and conditions for the certificate
1. This certificate will become invalid as soon as the referenced ISO 9001 quality system certificate becomes invalid
2. The system approval is only valid for the equipment listed, and for similar equipment employing equivalent design and manufacturing processes and principles. For other equipment, an application for extension of the certificate must be sent to DNV GL Business Assurance B.V.
3. DNV GL has to be informed in advance of any subcontracted activities 4. The manufacturer shall inform DNV-GL of the intended schedule of production for pressure equipment
covered by this certificate 5. Periodical audits and unexpected visits will be held, in order to verify that the manufacturer and his
subcontractor duly fulfil the obligations arising out of the approved quality system 6. The Manufacturer must give information of any intended adjustments of the Quality System to DNV GL
Business Assurance B.V., who will assess the changes and decide if the certificate remains valid 7. Manufacturer shall keep an up-to-date log of all manufactured pressure equipment with CE-marking
according Directive 2014/68/EU, which will be traceable to the equipment
Page 3 of 3
Certificate No.: 18-PED-ROT-H-16.Z0553830-02 EN
Place and date: Barendrecht, 2019-01-14
Revision No: 0
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V. Zwolseweg 1, NL – 2994 LB Barendrecht. Tel.: T +31 10-2922752. www.dnvgl.nl/certificering
E: RotterdamPED@dnvgl.com; KvK: 24273935 ISI-NL-PE-5-F5-P-H-EN/2018-39
8. The manufacturer complies with the Council Directive 2014/68/EU on Pressure Equipment and is allowed to affix the CE Mark followed by the DNV GL identification number 2388.
END OF CERTIFICATE
top related