production equipment and machinery
Post on 02-May-2022
9 Views
Preview:
TRANSCRIPT
Art MAteriAls service, inc.Manufacturer of Metal Stampings and Fasteners
Specialists in Serving the Picture Framing Industry
www.ArtMaterialsService.comNational Toll Free: 888-522-5526 Phone: 732-545-8888 Fax: 732-545-9166
625 Joyce Kilmer Avenue, New Brunswick, NJ 08901, USA
Founded in 1976Art Materials Service, Inc. © 2009
Volume #30
Production Equipmentand Machinery
- 2 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
COMPANY DETAIL
Thank you for your inTeresT in aMs ProducTs!Art Materials Service, Inc. (AMS) was founded in 1976 to provide reliable generic hardware to the aluminum picture framing industry. By 1985, AMS became the world’s largest manufacturer of metal hardware to this industry with a reputation for high quality and fair prices. Our continually expand-ing primary product line consists of metal hardware to assemble, hang, and secure aluminum, wood and plastic picture frames. Other items in our line include self-locking protective corrugated corners, mounting materials, laminating films, wire, easel backs, and a growing selection of hand- and air-operated machines used for the installation of AMS parts.
Most prices are quoted as “cost per thousand” (or “M”) parts.In order to avoid problems with the decimal, remember that $10.00/M parts = $0.01/each part.
Please noTe: Minimum invoice value for domestic orders has been decreased to $150.00.Orders under $150.00 will incur a $35.00 handling fee.$300.00 minimum order for exports.
If you require technical assistance, need an AMS distributor referral,or would like samples of AMS products, contact us:• By Phone, Toll Free National: 888-522-5526 or Local: 732-545-8888• By Fax: 732-545-9166• Visit Our Website: www.ArtMaterialsService.com
Art Materials Service also has a euroPean disTribuTion center in Emmerich, Germany:AMS Trading GmbH, Max-Planck-Str. 17, 46446 Emmerich, GermanyPhone: 49-(0)2822-91302-0 Fax: 49-(0)2822-91302-25 Web: www.AMS-Trading.de
TerMs and condiTions of saleFrom day of shipment – Net 30 days – Upon approval by the AMS Credit Department. FOB Art Ma-terials Service, Inc., warehouse. Not responsible for goods damaged in transit. All claims must be made within 5 days after receipt of goods. All prices are subject to change without notice. A 2% service charge per month on all balances over 30 days. Any costs sustained by Art Materials Service, Inc. in collecting delinquent accounts will become part of the total amount owed to Art Materials Service, Inc. Our liability shall be limited solely to the replacement or repair of defective material not meeting our specifications. Returns are only accepted when issued a return authorization number and packing slip.
sPecial PackagingMost bulk items in our catalog can be bagged or boxed in a form to make their handling and usage easier for our customers. AMS can also produce custom packs of hardware. For example: 2 wire hangers, 2 screws, and a 24” coil of wire in a private labeled package. For an individual quote please contact our Customer Service Department.
Due to ever-changing market conditions, our prices fluctuate often.Please refer to our Web site or call to verify pricing.
Phone: 732-545-8888 Domestic Toll Free: 888-522-5526 Fax: 732-545-9166
- 3 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
TABLE OF CONTENTS
Screwdrivers and AccessoriesPneumatic Screwdriver and Accessories .................................................................................... 4Ratchet Screwdriver ................................................................................................................ 5Automatic Screw Presenter ...................................................................................................... 5
Backloader Frame AssemblyCrimping Machine for Plastic and #523 Metal Frames ................................................................ 6
Riveting MachineryHi-Pro Eyelet Installation Machine ............................................................................................ 7
Tools for Self-Fastening HardwareMachinery for Installing V-Clip Staples, Easel Hinges and Self-Fastening Hangers ......................... 8
Canvas StretchersStretchers and Gallery Wrap Machines ...................................................................................... 9
Pneumatic Workstation ToolsMicro Pinner and Pins ............................................................................................................ 10Standard Flexi-Tab Tools ........................................................................................................ 10Wire Crimp Tool .................................................................................................................... 10Flexipoints and Rigid Points ................................................................................................... 11Jumbo-Style Flexitool and Flexipoints ..................................................................................... 11Framer’s Points ..................................................................................................................... 11Staplers and Fitting Tools ...................................................................................................... 12Staples and Nails .................................................................................................................. 13
WorkstationsTable-Mounted Workstation Kits ............................................................................................. 14
Pneumatic SuppliesAir Compressors ................................................................................................................... 17Filters, Hoses, Connectors, Etc. .............................................................................................. 18
Substrate CuttersInBlade Cutter for Rigid and Semi-Rigid Materials .................................................................... 22Verdi 2-in-1 Vertical Cutter for Precision Mass Production ......................................................... 24InBest Cutter Bars ................................................................................................................ 26
Blades for Matboard CuttersBlades for Matboard Cutters .................................................................................................. 28
UnderpinnersCassese Underpinners to Join Wood and MDF Frames ............................................................. 30Underpinner Options and Accessories ..................................................................................... 30
Moulding SawsCassese Saws and Choppers for Frame Mouldings ................................................................... 32
- 4 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sPNEUMATIC SCREWDRIVER AND ACCESSORIES
Scre
wdr
iver
s an
d A
cces
sori
es
Pneumatic Screwdriver -- NOW with modified torque speed specific for picture frames
Now with a specially modified torque speed specifically for working
with picture frames.
The AMS Pneumatic Screwdriver with push-to-start system has a switch to quickly toggle from forward to reverse. This screwdriver’s torque is fully adjustable.
AMS is committed to developing new products to automate and simplify frame assembly. AMS is the ONLY manufacturer worldwide to provide corner angles and wire hangers with slotted set screws pre-started at a fixed depth. This means that no backing up of screws is required when installing angles and hangers. Additionally, the hassle of missing screws is eliminated.
The AMS customized bit and sleeve (AMS #11-SLEEVE) engages slotted set screws in both corner angles and wall hangers. After inserting angles and hangers, simply press the #11-Sleeve to the screws that need to be tightened. The #11-Sleeve quickly and easily locates the screw slot while the pressing motion automatically turns the clutch. The screwdriver automatically stops when the screw is completely installed to the preset torque (or depth).
By combining the Pneumatic Screwdriver with an AMS Balancer, framers can create effective and efficient workstations to assemble frames and attach fasteners with screws. The workstation can also be used to Install Wood Screws -- simply change the screwdriver bit and torque setting. For further information, please contact our customer service staff.
Code Price93PSD45 355.00
Screwdriver Accessories
MAG-HDUse the AMS Premium Magnetic Bit Holder (AMS #MAG-HD) to magnetize a standard bit so that screws stay on the bit without having to hold onto the screw. A ring inside this holder firmly holds bit into place.
Code PriceMAG-HD Magnetic bit holder machined from one piece of stainless steel 18.00
AMSSMAG Rub bits inside the AMS Magnetizer to keep the bits magnetized and holding on to screws.
Code PriceAMSSMAG 18.00
BIT AMS Bits for driving wood screws with the AMS Electric and Pneumatic Screwdrivers.
Code Description PriceBIT1XS Short Bit for wood screws #4 size head or smaller 7.00BIT1XL Long Bit for wood screws #4 size head or smaller 2.85BIT2XS Short Bit for wood screws #5 up to #10 size head 3.25BIT2XL Long Bit for wood screws #5 up to #10 size head 3.00
AMS Sleeve makes installing AMS #11 angles and hangers prestarted with screws easy. It is spring loaded to guide its non-magnetic bit into the headless slotted set screws that are pre-started in AMS #11 angles and hangers.
Code 1 - 5 EA 6 - 14 EA 15 - 24 EA 25+ EA*
11-SLEEVE 47.00 37.60 28.20 23.50
8F444-SLEV 47.00 37.60 28.20 23.50
- 5 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
RATCHET SCREWDRIVER / AUTOMATIC SCREW PRESENTERScrew
drivers and Accessories
AMS Screw PresenterThe new AMS Screw Presenter delivers pan head screws to add automation and speed to the frame assembly process. This machine lines up screws one after the other to make them available for usage. Pick up each screw from the feeder with a magnetized screwdriver bit; then simply push screw into wood frame to attach hangers or other hardware. There is no need to adjust the screws with finger-tips, hence screws are efficiently picked up and inserted in one smooth movement.
This system is modular: the feeder rails can be adjusted in less than five minutes to accept screws ranging in size from #0 to #10.
Specifications:• Presents screws at a rate of up to 2 screws per second• Large hopper holds about 1000 - 1500 screws• Solid design will not move -- no tie downs or straps needed• Requires use of magnetized bits or a vacuum system
Code PriceAMSS45 Automatic Screw Presenter 725.00
MAG-HD Magnetic bit holder machined from one piece of stainless steel 18.00
AMSSBIT1 Driver bit used with AMS #F1301 and #F1303 screws. 20.00
Manual Ratchet Screwdriver to join aluminum frames
The AMS Ratchet Screwdriver with attached AMS #11-Sleeve is an inexpensive tool that improves #11 Aluminum Frame assembly productivity. Use with AMS #11 angles and hangers that have been prestarted with headless slotted screws.Place sleeve over screw and push down. The screwdriver rotates from just a push and not a twist, saving time and energy. There is a forward/reverse switch for backing up screws when required.
Code 1 - 5 EA 6 - 19 EA 20+ EA
11SCM Ratchet screwdriver 47.00 37.50 28.00
- 6 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sBa
cklo
ader
Fra
me
Ass
embl
yPLASTIC AND #523 ALUMINUM BACKLOADED FRAME ASSEMBLY
AMS Impressor Made in the USA
The AMS #CMD-B3 Crimping Machine joins Plastic and Aluminum Backloaded Mouldings. The work station is free-standing with the joining mechanism built into a 61cm x 91cm (24” x 36”) wood composite work surface mounted on a sturdy steel frame. The 91cm (36”) high work surface is permanently tilted at a 45° angle.The AMS Impressor is a foot-activated pneumatic unit. It can join frames as small as 12.7cm x 12.7cm (5” x 5”). Contact AMS for information on how to produce backloading frames with 8.9cm (3.5”) sides or for mouldings requiring other width joining angles.For use with AMS corner joining (crimping) angles #523-1B1 (15.9mm / 5/8” wide), #523-1B4 (15.1mm / 0.595” wide) and #523-1B3 (12.7mm / 1/2” wide) -- see specifications in drawings below.
Code Description 1 - 2 EA 3+ EA
CMD-B3 AMS Impressor with either CMDI-2-1 or CMDI-3 diehead 4600.00 4370.00
CMDI-2-1 Diehead used with #523-1B1 or #523-1B4 joining angles 550.00 435.00
CMDI-3 Diehead used with #523-1B3 joining angles 550.00 435.00
CMD-TORQ Beam Torque Wrench and Scale - helps accurately adjust die head. 89.00
- 7 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
HI-PRO EYELET INSTALLATION MACHINERiveting M
achinery
N E W AMS Hi-Pro Eyelet Installation Machine -- Made in the EU to AMS Specifications
The new AMS Hi-Pro Eyelet Installation Machine helps reduce frame production costs with pre-installation of eye-lets. Boards with pre-installed eyelets can be easily stacked, and clips can be affixed to stored boards as required. Operator can easily select the distance of eyelets from the board edge.
This machine is pneumatic (air-driven) to offer automatic activation with board contact and automatic feeding of eyelets -- this enables easy movement from installed eyelet to next eyelet installation position.
See AMS #321J Mini V-Clips and AMS #523-2R Pivot Springs on next page for usage with this ma-chine.See AMS Workstations and AMS Air Compressors.
Use with AMS Mini and Standard V-Clips as well as AMS Pivot Springs.
Please call or e-mail AMS Customer Service for pricing.
- 8 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sTOOLS FOR SELF-FASTENING HARDWARE
Tool
s fo
r Sel
f-Fa
sten
ing
Har
dwar
e
AMS Hand-Operated Toggle Press
The AMS #HP-2C Hand-Operated Toggle Press enables quick installation of self-fastening hardware. It is user friendly, light weight and can be shipped via UPS. Hardware is affixed to backing boards with the help of left and right centering guides. Use magnetic die heads listed on next page.
Code Description Price
HP-2C AMS Hand-Operated Toggle Press 770.00
HP-2C1 Guide for hand press 250.00
HP-2C2 Center disc required to install hangers 88.00
PMP-303 Adaptor to fit magnetic head to press 31.00
HP-3C1 Center disc required to install easel hinges 86.00
Magnetic Die Heads
MPHThese Magnetic Die Heads are used on the presses detailed above for the installation of AMS “starburst” or “press-in” hardware. Hardware is held in place magnetically with two spring-loaded alignment pins that retract back into the die as part is inserted. Other die heads are available upon request.
Code Parts for Installation PriceMPH-01 Small Nailess Sawtooth Hangers - SW1/HW1 100.00MPH-02 Large Nailess Sawtooth Hangers - MICA2/HDWD2 100.00MPH-03 Kwik Hangers - KH-2B and KH-3 100.00MPH-04 V-Clip Staples - 523-3A & 523-3B 100.00HP-3C31 Easel Hinges - K18 - Use with HP-3C1 78.00HP-3C32 Easel Hinges - K17 - Use with HP-3C1 78.00
- 9 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
CANVAS STRETCHING / GALLERY WRAP MACHINECanvas Stretchers
HAMMER-1 = $75.00 HAMMER-2 = $88.00
- 10 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sMICRO-PINNER TOOL AND PINS / WIRE CRIMP TOOL
Pneu
mat
ic W
orks
tatio
n To
ols
Micro-Pinner Tool
Our Micro-Pinner Tool inserts headless pins into wood mouldings. These pins can barely be seen -- hence this tool is ideal to use for assembling shadow box frames. Use AMS Headless Pins listed below. Maximum length of pin for this tool is 1-1/8” (28mm).
See AMS Workstations and AMS Air Compressors.
Code Description PriceS400 AMS Micro-Pinner 460.00
Headless PinsCode Length Pins / Box Boxes / Carton Price / BoxS4122T 1/2" (12mm) 20,000/box 24 boxes/carton 23.14S4152T 5/8" (15mm) 20,000/box 24 boxes/carton 24.08S4222T 7/8" (22mm) 20,000/box 16 boxes/carton 32.48S4282T 1-1/8" (28mm) 20,000/box 12 boxes/carton 41.44
Standard-Fire Flexi Tab ToolThe AMS Standard-Fire Flexi Tab Tool inserts one Flexi-Point or Rigitab per press of trigger into wood mouldings to quickly clip frame load into frame. The nosepiece is designed to allow Flexi-Point insertion almost horizontally. After firing, just slide the tool over to the next point of insertion rather than lifting away from frame for speed and efficiency. Tabs are inserted at an angle, which means they need to be pressed down to complete assembly. This tool is lightweight and can be loaded quickly without change of work position.
See AMS Workstations and AMS Air Compressors.Code Description 1 - 5 EA 6+ EA*SFLX1 Standard single-shot tool 310.00 275.00
Wire Crimp Tool
The AMS Wire Crimp Tool is an air-driven tool that automatically feeds rings to crimp together picture framing wire quickly and safely. It saves wire because no twisting of ends is required. A 10-foot polyurethane (coiled) hose is included with every WC-1A purchase.
See AMS Workstations and AMS Air Compressors.
Code Description PriceWC-1A AMS Wire Crimp Tool 1050.00
Aluminum wire rings for Wire Crimp Tool 1 - 9 BX 10 - 49 BX 50+ BXWR-1 13,000 rings / box 99.70 89.70 80.70
Price per M 7.67 6.90 6.21
MAde in the eU
MAde in the eU
- 11 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Flexi-Tab ToolsFLEXI-TAB TOOLS / FLEXI-POINTS / FRAMER’S POINTS -- NEW !!
Flexipoints and Rigid Points -- Standard 5/8” (15mm) lengthAMS Strandard Flexi- and Rigid-Points can be used with SFLX1, SFLX2 and other standard Flexi-Tab Tools to clip frame load into backloaded frames. Dimensions are 5/8” (15mm) long, 3/16” (5mm) wide and 0.015” (0.35mm) thick.
Code Plating Packaging 1 - 4 BX 5 - 9 BX 10 - 20 BX 30+ BX*FLX02 Black / Flexible 15,000/box; 10 boxes/full carton 68.00 61.00 54.00 48.00 (FLX021T01C) Price per thousand 4.53 4.07 3.60 3.20
1 - 4 BX 5 - 14 BX 15 - 30 BX 45+ BX*FLX06 Zinc / Rigid 10,000/box; 15 boxes/full carton 52.00 44.50 41.00 38.00
Price per thousand 5.20 4.45 4.10 3.80
AMS Flexible Framer’s Points can be used with FlexiMaster® Tools to clip frame load into backloaded frames. These arrow-shaped Flexi-Points are 5/8” (15mm) long and 0.015” (0.35mm) thick.
Code Plating Packaging 1 - 4 BX 5 - 9 BX 10 - 49 BX 50+ BX*FLX11MM Black 3400/box; 50 boxes/full carton 21.00 19.00 17.00 15.00
Price per thousand 6.18 5.59 5.00 4.41
Framer’s Points -- Standard 5/8” (15mm) length --- NEW !!
NEW !! Rigid Framer’s Points for pneumatic tools:• Can be used with FlexiMaster® Tools to clip frame load into backloaded frames.• Ideal where there is no need to open the back of the frames • Made of rigid premium quality steel, galvanised and varnished.• Dimensions are 5/8” (15mm) long, 3/16” (5mm) wide and 0.015” (0.35mm) thick.
Code Packaging 1 - 9 BX 10 - 40 BX 50 - 90 BX 100+ BX*FLX12MC 12,000 points/box (+/- 4% due to steel thickness tolerances)
(250 points/strip; 48 strips/box; 10 boxes/full carton) Call for Quote
Price per thousand
Jumbo-Style Pneumatic Flexitool 1” (25mm) --- NEW !!
This exclusive pneumatic Jumbo-Style Flexitool uses 1” (25mm) flexipoints:
• Economical: A single 1” (25mm) flexipoint can replace 4 regular 15mm flexipoints
• Lightweight and easy to slide along moulding• Ideal for big frames, mirrors or poster frames• Extreme reliability proven by framers worldwide• Ideal for medium and contract framers
See AMS Workstations and AMS Air Compressors.
Code Description 1 - 5 EA 6+ EA*SFLX4 Jumbo Style Pneumatic Flexitool Call for Quote
MAde in the eU
MAde in the eU
Jumbo Flexipoints -- 1” (25mm) length --- NEW !!
For use with SFLX4 Jumbo-Style Pneumatic Flexitool (1” or 25mm)
Code Plating Packaging 1 - 4 BX 5 - 14 BX 15 - 30 BX 45+ BX*FLX08 Black 3,000/box; 15 boxes/full carton 54.00 50.00 45.00 41.00
(Silver available) Price per thousand 18.00 16.67 15.00 13.67
MAde in the eU
- 12 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sSt
aple
rs a
nd F
ittin
g To
ols
PNEUMATIC STAPLERS AND FITTING TOOLS
Pneumatic Staplers AMS Staples listed on next page.
AMS Air-Powered Staplers are light weight (0.6 kg) and durable. A special modification developed by AMS ensures that these staplers will not cut canvas or crush boards. Cartridges of staples are reloaded quickly within seconds. Each stapler is offered with or without a front spacer (nose plate) which turns it into a fitting tool. Use AMS Staples listed on next page.See AMS Workstations and AMS Air Compressors.
The AMS Standard Stapler is available in three variations for affixing staples of crown widths 3/8” (10mm), 3/16” (4.4mm) or 1/2” (12mm).
These staplers are used to fasten materials that are flush. For example, they can quickly clip corrugated corners as well as attach canvas artwork to frames when stretching by hand.
The AMS #S100 Narrow Crown Stapler is particularly useful for attaching sawtooth hangers and door easel backs onto frames.
Code Description AMS Staple Code 1 - 5 EA 6+ EA*S200 Stapler - 3/8” (10mm) regular crown S2 / 32 245.00 220.00S201 Nose plate to change S200 into fitting tool S3 / 31 60.00 53.50S300SB Stapler - 1/2” (12mm) wide crown S3 / 31 240.00 215.00
S100 Stapler - 3/16” (4.4mm) narrow crown 310.00 275.00
Long-Nose Pneumatic Stapler with Balancer Ring Connector
The AMS Long-Nose Stapler has the advantages of other AMS pneumatic staplers, but it has an elongated 2-inch nose and a ring to connect a balancer for precision. This stapler can be used where it is difficult to staple with a normal stapler.
This Stapler’s 10mm (3/8”) wide crown is for use with staples ranging in leg length from 4mm to 16mm (3/32” to 5/8”). Use AMS Staples listed on next page.
Code Description AMS Staple Code PriceS200SL Long-Nose Stapler - 3/8” (10mm) regular crown S2 / 32 320.00
Workshops can be made more efficient with the help of AMS Workstations and Pneumatic Accessories.Call AMS Customer Service for more information.
Pneumatic Fitting Tools
The AMS Fitting Tool is a stapler with a special nose plate attached to ensure that staples are not driven completely into framing materials, which means the staples are kept extended about 50% above the installed surface. This tool is helpful when inserting staples to hold frameloads into backloaded frames (an inexpensive alternative to a Flexible Tab Tool).
AMS S200 Staplers can be transformed into Fitting Tools with the addition of a special front spacer or nose plate (AMS Code #S201).
Code Description AMS Staple Code 1 - 5 EA 6+ EA*S200A Fitting Tool - 3/8” (10mm) regular crown S2 / 32 285.00 255.00S101 Fitting Tool - 3/16” (4.4mm) narrow crown 325.00 290.00
MAde in the eU
- 13 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Staples and Nails
STAPLES AND NAILS
AMS #S2 Staples -- Made in the EU
Use AMS #S2 Staples with AMS Staplers #S200, #S200A and #S200SL as well as with the following compatible tools: ATRO #7, BEA #71, DUO-FAST #7, HAUBOLD #7100, KIHLBERG #670, PREBENA #V, SENCO #C.
10 mm (3/8”) Standard Crown StaplesCode Length Qty / Box BX / Carton Lb / CTN 1 - 9 BX 10 - 23 BX 24 - 96 BX 120+ BX*S2042T01C 4 mm (5/32") 20,000/box 24/carton 48.4 lb Call for quote
1 - 9 BX 10 - 39 BX 40 - 120 BX 160+ BX*S2061T01C 6 mm (1/4") 10,000/box 40/carton 43.6 lb 11.70 9.50 6.35 5.50S2081T01C 8 mm (5/16") 10,000/box 30/carton 44.4 lb 13.20 10.70 7.20 6.20
1 - 9 BX 10 - 23 BX 24 - 96 BX 120+ BX*S2101T01C 10 mm (3/8") 10,000/box 24/carton 44 lb 15.30 12.20 8.50 7.10S2121T01C 12 mm (1/2") 10,000/box 24/carton 52.8 lb 16.80 13.70 9.40 7.90
1 - 9 BX 10 - 21 BX 22 - 88 BX 110+ BX*S2141T01C 14 mm (9/16") 10,000/box 22/carton 45.8 lb 18.50 15.20 10.40 8.70
AMS #S3 and #S1 Staples -- Made in the EU
Use AMS #S3 and #S1 Staples with AMS Staplers #S100, #S101 and #S300SB as well as with the following compatible tools: BEA #97, BOSTICH #SX4023, PREBENA #O, SENCO #W.
12 mm (1/2”) Wide Crown StaplesCode Length Qty / Box BX / Carton Lb / CTN 1 - 7 BX 8 - 40 BX 48+ BX*S308DT01C 12 mm (1/2") 10,000/box 8/carton 22.00 13.00 10.85
3.1 mm (11/64”) Narrow Crown StaplesCode Length Qty / Box BX / Carton Lb / CTN 1 - 9 BX 10 - 19 BX 20 - 60 BX 80+ BX*S10381001C 10 mm (3/8") 20,000/box 10/carton 46.2 lb Call for quote
1 - 9 BX 10 - 19 BX 20 - 60 BX 80+ BX*S10122001C 12 mm (1/2") 20,000/box 10/carton 41.80 28.20 26.00 23.30
1 - 9 BX 10 - 15 BX 16 - 64 BX 80+ BX*S19161001C 14 mm (9/16") 10,000/box 16/carton 29.00 23.40 15.25 13.20
- 14 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sHEAVY DUTY WORKSTATION KITS -- TABLE MOUNTED -- NEW QUALITY !!
Wor
ksta
tions
93F261 Table Mount -- 3-Foot Overhead Pneumatic Accessories Required
Along the overhead railing, pneumatic accessories arerequired to connect tools to air compressors. Theseinclude black boxes, connectors and pneumatic tubingas detailed in the image above.
AMS can help create an assemblyaccording to your workstation specifications.
Components for 1 Black Box & ConnectorsCode Description93MAN 1 each Black Box93P004 2 each 1/4” Hex Plugs93D5M4 2 each 1/4” Male Couplers93P006 1 each 3/8” Hex Plug93Q5M6 1 each 3/8” Male Connector93N12100 Nylon Tubing
Please call for quotation.
Please contact AMS Sales for custom quote.
93F261 Workstation -- Fixed Overhead ArmCode Description93R210 1 Mounting base foot + screwsE010 2 each Suspension gliders + screws93R221 2 each Swivel tool supports93R258 Rails (8 feet in total)93R211+ Rail screws and end cap
Please call for quotation.
Please contact AMS Sales for custom quote.
Other AMS workstation accessories to consider:• Wire Spool Holders
• Integral Filters/Regulators
• Balancers
• Super Silent Air Compressors
AMS workstations offer optimum productivity because they help organize frame assembly workshops while reducing fatigue. These stations offer overhead rails from which tools can be suspended on adjustable balancers or lines. Tools can easily moved along rails and out of operator’s way when not in use. Regulator accessories can be attached for pneumatic tools.
Whether simple or complex, AMS can customize workstations to adapt to individual workshop requirements. Ask AMS Customer Service to help design the right workstation for your shop.
AMS Table Mount Workstations must be attached to a table with the Base Foot. The rail extending upward is 5 feet tall. The standard workstations detailed below and on the next of this catalog are available in two variations: 1. With a 3-foot overhead rail that is rigidly fixed to the 5-foot rail, 2. With a 6-foot overhead rail affixed to two 5-foot rails.
- 15 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Workstations
HEAVY DUTY WORKSTATION KITS -- TABLE MOUNTED -- NEW QUALITY !!
93F265 Table Mount -- 6-Foot Overhead Rail
93F265 Workstation ComponentsCode Description93R210/226 2 each Mounting bases + screwsE010 3 each Suspension gliders + screws93R221 3 each Swivel tool supports93R258 Rails (16 feet in total)93R211+ Rail screws and caps
Please call for quotation.
Please contact AMS Sales for custom quote.
Pneumatic Accessories
Along the overhead railing, pneumatic accessories arerequired to connect tools to air compressors. These
include black boxes, connectors and pneumatic tubing as detailed in the image above.
AMS can help create an assemblyaccording to your workstation specifications.
Black Box VariationsCode Description Price
93MALA1B 1 black box with quick disconnects 56.50
93MALA2B 2 black boxes + quick disconnects 136.00
93MALA3B 3 black boxes + quick disconnects 205.00
- 16 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sW
orks
tatio
nsWORKSTATIONS AND COMPONENTS
Balancers for Workstation Tools
93B AMS Balancers are sold separately unless purchasing Pneumatic Support System.
Code Capacity Price93B045 2 - 4-1/2 pound (1-2 Kg) 59.9593B080 4-1/2 - 8 pound (2-4 Kg) with 8-foot long cable (good for AMS Tools) 79.9593B135 6-1/2 - 13-1/2 pound (3-6 Kg) with 8-foot long cable 109.95
Wire Spool Holders for Workstation
93R AMS Wire Spool Holders keep 5-lb spools of wire neatly attached to workstation frame.
Code Description Price93R234 5-lb Wire Spool Holders 59.00
93F262 Table Mount with Rotating Arm -- 3-Foot Overhead
93F262 Workstation -- Rotating ArmCode Description93R210 1 Mounting base foot + screwsE010 2 each Suspension gliders + screws93R221 2 each Swivel tool supports93R258 Rails (8 feet in total)93R230 Rotating Arm
Please call for quotation.
Please contact AMS Sales for custom quote.
- 17 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Pneumatic Supplies
AIR COMPRESSORS
Super Silent Air CompressorsAMS Air Compressors are well designed and built from high quality components. These compressors operate quietly and require little maintenance. Overheating damage is prevented with a thermal cut-out device. 1-year limited warranty is applicable to each purchase. All compressors are available in 120-volt and 220-volt. See other components and lubricants on following pages in this catalog. Please contact the AMS Customer Service Department for further advice.
AMS recommends changing both the coalescent (AMS #CM3C0985) and top intake (AMS #CM3C1794) filters every six months.
Each compressor is shipped with:• USA-standard type #152 female coupler• Tank and line pressure gauge• Line pressure regulator• Moisture trap/filter/gauge• Safety valve• Air intake filter• Carrying handle.
CM50D
AMS CM50D Air Compressors are ideal for operation in small workshops with one CNC and a stapler/flexi driver.• 1/2 HP delivered from one motor with 2.15 CFM Free Air• Air Pressure = up to 120 psi (8 bar)• Pressure cycle = 85-115 PSI• Tank size = 2.25 gallons• Shipping weight = 70 lbs.
Code Description Price EachCM50D Delivers 50 liters / minute Call for quote
CM50
AMS CM50 Air Compressors are ideal for operation in small workshops with one underpinner and a stapler. 1/2 HP delivered from one motor with 2.15 CFM Free Air• Air Pressure = up to 120 psi (8 bar)• Pressure cycle = 85-115 PSI• Tank size = 6 gallons• Shipping weight = 70 lbs.
Code Description Price EachCM50 Delivers 50 liters / minute 995.00
Oil for CompressorsCode Description PriceCM3C1790 Oil for Compressor 1/2 liter (16 ounces) 28.00
CM99
AMS CM99 Air Compressors are ideal for workshops with up to two underpinners operating simultaneously or over a long period of time daily. Each machine has 1 HP delivered from two motors with 4.35 CFM Free Air. Wheels are attached for ease of movement • Air Pressure = up to 120 psi (8 bar)• Pressure cycle = 85-115 PSI• Tank size = 6 gallons• Shipping weight = 101 lbs.
Code Description Price EachCM99 Delivers 100 liters / minute Call for quote
- 18 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sPNEUMATIC FILTERS AND HOSES
Pneu
mat
ic S
uppl
ies
Flexcoil Polyurethane Air Hose (Self Storing)
93C
Flexcoil polyurethane air hose cannot be kinked or scraped. This lightweight, yet extremely durable hose will withstand the rigors of tough industrial environments while maintaining its resiliency over a long period of time. Swivel fitting is provided with thread seal, eliminating the need for sealing with tape or paste. Each hose has ¼-inch MPT fittings.
Code Length Price93C410 10 feet 18.3093C415 15 feet 20.6093C420 20 feet 21.80
Flexeel Reinforced Polyurethane Straight Hose
93F
Flexcoil reinforced polyurethane straight hose offers an excellent alternative to much bulkier plastic and rubber hoses. The reinforced construction eliminates the possibility of having the various layers separate due to constant expansion and contraction during pulsating operations, such as with Staple or Flexi-Point Tools. Each hose has ¼-inch MPT fittings.
Code Length Price93F425 25 feet 30.0093F450 50 feet 50.00
Lock-On Rubber Hose / Fittings
93TThis lock-on rubber hose will withstand pressures up to 250 PSI and temperatures up to 175°F. Lock-on fittings, when used with lock-on hose, eliminate the need for ferrules or clamps. Each hose has ¼-inch MPT fittings.
Code Length Price93T425 25 feet 56.5093T450 50 feet Please call
Filters for Compressors
CM3C1794 Top Intake Filter (1 per kit)
Code PriceCM3C1794S 29.00
CM3C0985 Coalescent Filter
Code PriceCM3C0985 50.00
- 19 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Pneumatic Supplies
PNEUMATIC TUBING
Polyethylene Tubing
93P POLYETHYLENE TUBING 3/8 OD / 1/4 ID , 192 PSI
Code Length Price93P100 Please call93P500 105.00
Coilock Union Tee
93Q6T4 COILOCK UNION TEE, 3/8 OD
Code Length Price93Q6T4 12.00
Coilock Female Connector
93Q6F4 COILOCK FEMALE CONNECTOR, 3/8 OD TO 1/4 FPT
Code Length Price93Q6F4 11.50
Nylon Tubing
93N Nylon TUBING
Code Size Price93N38100 3/8"O.D. X .275 I.D X 100 80.0093N12100 1/2"O.D. X .375 I.D X 100 130.00
- 20 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sPNEUMATIC FILTERS, REGULATORS AND GAUGES
Pneu
mat
ic S
uppl
ies
PSI Gauge
93SG16 0-160 PSI Gauge with 1-½-inch dial
Code Price93SG16 13.50
Mounting Bracket for Regulator
93SMBO Mounting Bracket with panel nut for Regulator and assemblies used to mount on walls or beams.
Code Price93SMBO 8.40
Filters and Regulators
93SR04These Regulators offer a balance of compact size and optimum flow. With a 3/8-inch die-cast aluminum body, this product is perfect for applications where performance, small size and low cost are important. Each comes equipped with a 0-160 PSI Gauge and Mounting Bracket with panel nut.
Code Description Price93SR04 Includes gauge and mounting bracket 61.50
93SU01Our Integral Filter/Regulators combine filter and regulator into a space-saving unit. Balanced poppet value design assures superior performance. Each comes equipped with 5-micron filter element, 0-160 PSI Gauge, and Mounting Bracket with panel nut.
Code Description Price93SU01 Includes gauge and mounting bracket 105.00
93SU02 Integral Filter/Regulator, Lubricator Duo combines 93SU01 with a Lubricator unit added.
Code Description Price93SU02 Includes gauge and mounting bracket Please call
93SU03Integral Coalescing Filter / Regulator / Lubricator Trio combines a coalescing filter (removes 99.97% of solids and fluids down to 0.3 microns) with a Regulator and Lubricator. Each unit comes equipped with a 0-160 PSI Gauge and Mounting Bracket with panel nut.
Code Description Price93SU03 Includes gauge and mounting bracket Please call
- 21 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
PNEUMATIC CONNECTORS, BLOW GUNS AND LUBRICANTPneum
atic Supplies
Air Tool Lubricant
93LT16
Our air tool lubricant is a specially formulated ISO 46 lubricant, which prolongs the life of air tools, cylinders and accessories while allowing maximum performance. Our lubricant formulation inhibits the formation of rust, and is non-detergent, non-corrosive, non-reactive and stable (non-decomposing). This 16-ounce size has a convenient flip-up pour cap.
Code Description Bottles / Carton Price / Bottle93LT16 16-ounce bottle 12 BT/Carton 10.00
Tee Manifold Assembly
93MAN3 Tee Manifold Assembly – is a good choice for two-way air split distribution. Includes: (1) Tee Manifold, (1) ¼-inch Connector and (2) ¼-inch Six Ball Couplers.
Code Price93MAN3 24.60
Cross Manifold Assembly
93MAN4 Cross Manifold Assembly - is a good choice for three-way air split distribution. Includes: (1) Cross Manifold, (1) ¼-inch Connector and (3) ¼-inch Six Ball Couplers.
Code Price93MAN4 35.90
Blow Guns
93G
Our Blow Guns are supplied with 1/8-inch NPT female inlet thread and 1/8-inch NPT female outlet thread. The ergonomic design of the body and large operating lever reduce user fatigue and discomfort, even during long-term usage. These blow guns conform to OSHA standards for noise levels (1910.95) and less than 30 PSI dead-ended pressure (1910.242B).
Code Description Price93G60A Standard 14.6093G60B High-volume air flow 18.30
Industrial Couplers and Connectors (Quick Disconnect)
Our Coilflow industrial interchange couplers and connectors are useful when a simple push-to-connect operation is desireable.
Code Description Price
93Q5F4 1/4-inch Female Thread Connector (used with hose) 1.80
93D5F4 1/4-inch Female Thread Coupler (used with hose) 6.30
93Q5M4 1/4-inch Male Thread Connector (used with regulator) 1.70
93D5M4 1/4-inch Male Thread Coupler (used with regulator) 6.50
- 22 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sSu
bstr
ate
Cutt
ers
INBLADE CUTTER -- NEW !!
The InBlade cutter is the final solution to cut all the rigid and semi-rigid materials used in to-day’s sign, frame and photo markets. The reliable linear bearing guide system combined with the robust structure guarantees an accurate and smooth cut of all the materials. The inter-changeable cutting head system offers an easy-to-use solution to hold all the available cutting heads and it is ready to be used by new tools developed in the future.
The InBlade cutter is available in three cutting sizes: 165 cm (65”) & 210 cm (82”) and it allows cutting the surprising maximum thickness of 20 mm.
InBlade Cutter
165 cm Price = $4205.00
210 cm Price = $4655.00
250 cm Price = $5155.00
MaterialsRigid Materials ThicknessAcrylic / Plexiglas * 6 mmAluminum Sheets 1.6 mmAluminum Composites 4 mmMDF 4 mmGlass * 6 mm
Semi-Rigid Materials
Foamboard * 13 mm20 mm
PVC Foamboard 13 mm
Cardboard * 13 mm20 mm
Re-Board * 13 mm20 mm
Corrugated Plastic 13 mmMountboard 4 mm
* Optional Accessory Required
InBlade 72 85 61 - 165 cm 72 85 62 - 210 cm 250 cmCutting Head Operation Manual Manual ManualClamp System Operation Pneumatic Pneumatic PneumaticCutting Height 165 cm / 65” 210 cm / 82” 250 cm / 99”
Dimensions HxWxD 225 x 210 x 56 cm88.5 x 82 x 22”
268 x 210 x 56 cm105 x 82 x 22”
Weight 70 Kg / 154 lb 84 Kg / 185 lb
- 23 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
InBlade Cutter AccessoriesINBLADE CUTTER ACCESSORIES
InBlade AccessoriesCode Description Price45 18 96 Acrylic Cutting Head 153.0045 18 97 Triple Blade Cutting Head 221.0045 18 98 V-Groove Cutting Head (alu. Composites) 420.0045 18 99 Glass Cutting Head 410.0045 19 04 V-Groove Cutting Heads Support 111.2545 19 85 Re-Board V-Groove Cutting Head 286.0045 19 86 Foamboard V-Groove Cutting Head 283.5045 06 51 Laser Beam 652.5045 18 01 Free Standing InBlade 165 cm 269.0045 18 02 Free Standing InBlade 210 cm 298.0045 19 13 Free Standing InBlade 250 cm 317.0013 01 04 Trapezoid Blades (100 units) 31.0013 01 25 Acrylic Scoring Blade (5 units) 13.5013 01 71 V-Groove Blade (alu. Composites) 185.5013 01 72 Circular Blade (Set 2 units) 163.0014 07 43 Glass Cutting Wheel 25.0013 01 79 Re-Board V-Groove Blades (10 u.) 40.5013 01 80 Foamboard V-Groove Blades (10 u.) 25.00
- 24 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sVe
rdi C
utte
rVERDI TWIN DUAL CUTTING SYSTEM -- NEW !!
Seamless splices. Crisp cuts. Prefectly matched panels. Square edges. Delivering perfect cuts every time, this machine will pay for itself almost immediately. The only of its kind with two multi-substrate cutters in one, the Verdi Twin acts as a power saw and as a pneumatic utility blade cutter. No adjustments, no replacements, no tools needed.
Verdi Twin Package includes10 Utility Blades, Saw Blade, Wall Mounting Kit, 2 Hp Dust Collector.
For all Verdi Twin CuttersPneumatic blade operation Saw blade: 250 x 30 mm/Z80 Engine power: 1.5 hp Speed: 2700 RPM
Verdi Twin 2-in-1 Vertical Cutter for Precision Mass Production
122 cm Price = $ 9,510.00
157 cm Price = $ 9,915.00
210 cm Price = $13,490.00
244 cm Price = $14,075.00
305 cm Price = $15,170.00
MaterialsSaw Blade for Rigid Panels on LeftWood
Aluminum
Aluminum Composites
Corrugated Plastic
PVC
Acrylic
MDF
Utility Blade for Semi-Rigid Panels on RightFoamboard
Gatorboard ®
Cardboard
Mat Board
Honeycomb board
Mountboard
Verdi Twin 728550 - 122 cm 728551 - 157 cm 728554 - 210 cm 728552 - 244 cm 728553 - 305 cm
Saw operation Manual Manual Electronic Electronic Electronic
Cutting max height 122 cm / 48 ” 157 cm / 61.8” 210 cm / 82.7” 244 cm / 96.1” 305 cm / 120.1”
Thicknesses allowedRigid/semi-rigid/glass
22 / 22 /1.5-3 mm
22 / 22 /1.5-3 mm 22 / 22 22 / 22 22 / 22
Dimensions in cm 212 x 250 x 50 242 x 250 x 50 298 x 250 x 50 345 x 250 x 50 395 x 250 x 50
Weight 138 Kg / 304 lb 161 Kg / 355 lb 186 Kg / 410 lb 203 Kg / 448 lb 233 Kg / 514 lb
- 25 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
Verdi Cutter AccessoriesVERDI CUTTER BLADES AND ACCESSORIES
Laser beam: Aligned with one or both cutting areas.
Arm extension: 1 m extended mea-suring arm for either cut-ting area.
Dust collector included in package: Minimal dust production resulting from backside blade cover. Requires 230 V.
Verdi Twin and Basic Accessories and BladesCode Description Price
728511 Verdi pneumatic cutter accessory 122 cm 2,600.00
728516 Verdi pneumatic cutter accessory 157 cm 2,700.00
728533 Verdi pneumatic cutter accessory 210 cm 2,840.00
728531 Verdi pneumatic cutter accessory 244 cm 3,098.00
728541 Verdi pneumatic cutter accessory 305 cm 3,448.00
140743 Cutting wheel for glass with support 24.75
130115 Blades for Verdi pneumatic cutters /100 units 221.00
451780 Cutting head for glass 188.00
451133 Knife holder set 157.00
142006 Laser beam for cutting head 800.00
142002 Arm extension Verdi -1 m 400.00
451111 Extra measure TAB for Verdi - RIGHT 120.00
451175 Extra measure TAB for Verdi - LEFT 120.00
140370 Saw blade / 250x30 / Z80 / widia 132.00
140330 Saw blade for wood / 250x30 / Z80 141.00
140322 Saw blade for aluminium / 250x30 / Z80 / widia 150.00
140360 Saw blade for plastic / 250X30 / Z80 165.00
- 26 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sINBEST CUTTER BARS --- NEW !!!
InBe
st C
utte
r Bar
s
The Best Investment For Your Workshop
The new InBest range of cutter bars has been developed and constructed to satisfy all cutting requirements of a wide range of graphic materials; covering from the most delicate flexible material to any semi-rigid material.
The unique feature of using a linear bearing system to guide the cutting head guarantees an excellent perfor-mance and extreme precision, unmatched by any other cutter in the market.
All InBest models are available in five different sizes: 110 cm (44”), 160 cm (63”), 210 cm (82”), 260 cm (102”) and 320 cm (126”).
COMMON FEATURES OF ALL INBEST CUTTERS:
• User-friendly machine easy and simply to install.
• Plastic strip for sight line to visualize the cutting line and avoid guesswork need.
• Cutting thickness up to 20 mm for semi-rigid materials.
• Dust free operation to safely work close to printers
InBest Cutter Bars
The InBest Basic, which is the entry-level model, is equipped with a useful and easy-to-use single cutting head holder. The cut requires a soft downward hand pressure.
110 cm Price = $ 950.00; 160 cm Price = $ 1,020.00
210 cm Price = $ 1,120.00; 260 cm Price = $ 1,205.00
320 cm Price = $ 1,295.00
The InBest Twin features a revolutionary dual cutting head system to allow the customer to have two different cutting heads installed at one time and block them if required. The different cutting heads available provide the equipment with a great versatility and pro-ductivity.
110 cm Price = $ 1,175.00; 160 cm Price = $ 1,240.00
210 cm Price = $ 1,340.00; 260 cm Price = $ 1,425.00
320 cm Price = $ 1,515.00
The InBest Pro adds to the equipment an integrat-ed aluminum base with two different cutting tracks: one with a narrow groove for general purposes, to be used with the knife blade; and another with a built-in cutting strip, to be used with the circular blade.
The InBest Pro is also equipped with an integral lift and hold mechanism, which can be used from both sides, to facilitate the material loading.
110 cm Price = $ 1,745.00; 160 cm Price = $ 1,835.00
210 cm Price = $ 1,970.00; 260 cm Price = $ 2,135.00
320 cm Price = $ 2,295.00
- 27 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
InBest Cutter BarsNEW!! --- INBEST CUTTER BARS
Materials Maximum
SEMI-RIGID MATERIALS Thickness (mm)
Foamboard 13 mm / 20 mm*
Cardboard 13 mm / 20 mm*
PVC 5 mm / 10 mm**
Honeycomb 13 mm / 20 mm*
Corrugated Plastic 13 mm
Mountboard 3.5 mm
RIGID MATERIALSAcrylic / Plexiglas 4 mm*
FLEXIBLE MATERIALSFabric / Textiles
Plastic Film
Banner Materials
Paper
Vinyl
Magnetic sheet
* Optional Accessory Required** Possible but not as a daily use
InBest AccessoriesCode Description Price45 22 92 Acrylic Cutting Head - Up to 4 mm 93.0045 22 93 Reverse Cutting Head - Cut from right to left 87.0045 22 94 Extra Blade Cutting Head - Up to 20 mm 89.00
45 22 01 Table Mount Elevator for InBest & Inbest Twin (1 set), to offer an easy operation, raising the cutter above the material for positioning the cutting line. 220.00
13 01 30 Trapezoid Blades (100 units) 32.0013 01 46 Circular Blade (1 unit) 8.0013 01 47 Acrylic Scoring Blade (5 units) 29.10
Acrylic Cutting Head Reverse Cutting Head Extra Blade Cutting Head
Table Mount Elevator
- 28 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sBLADES FOR MATBOARD CUTTERS
Blad
es fo
r Mat
boar
d Cu
tter
s
“Keen Set” Blades for Matboard Cutters
Double-bevel edge for high-precision cuts on matboard
AMS “Keen Set” blades may be used in these cutters:Fletcher 2000, 2100 & Matmate; C&H after 1980; Keeton Delux Head; Alto Deluxe Hand Cutter
Code ThicknessSingle Box Full Cartons
Blades / Box 1 - 29 BX Code Boxes / Carton 1 - 5 CTN 6+ CTN* CB21-1H 0,30 mm (0.012”) 100/box 12.55 CB21-1H30C 30 boxes/carton 322.50 207.00
(5 per wrapper) Price per box 10.75 6.90Weight per carton 14.9 lb./6.8 kg
CB22-1H 0,38 mm (0.015”) 100/box 12.55 CB22-1H30C 30 boxes/carton 322.50 207.00(5 per wrapper) Price per box 10.75 6.90
Weight per carton 14.9 lb./6.8 kg1 - 5 BX 1 CTN 2+ CTN*
CB21-AM 0,30 mm (0.012”) 1250/box 123.50 CB21-AM6C 6 boxes/carton 544.00 480.00Price per 100 blades 9.88 Price per 100 Blades 8.40 6.40
Weight per carton 32.4 lb./14.7 kg
CB22-AM 0,38 mm (0.015”) 1250/box 123.50 CB22-AM6C 6 boxes/carton 544.00 480.00Price per 100 blades 9.88 Price per 100 Blades 8.40 6.40
Weight per carton 32.4 lb./14.7 kg
AMS blades have a height of 18.8 mm compared to the C&H 19 mm. This shorter height does not compromise function.
Ask about future availability of AMS blades with single-bevel edge and 0.43 mm (0.019”) thick blades.
AMCE10 Blades for Computerized Matboard Cutters
AMCE10 blades may be used in these computerized matboard cutters:Eclipse™ Classic, Eclipse™ PRO, Eclipse™ XL, Eclipse™ LT;
MatMaestro/iMat, MatWRITER™; SpeedMat®; Wizard® 5000
Code ThicknessSingle Box Full Cartons
Blades / Box 1 - 9 BX Code Boxes / Carton 1+ CTNAMCE10 500/box 75.00 AMCE10 10 boxes/carton 650.00
Price per box 65.00
- 29 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
UNDERPINNERS TO JOIN WOOD AND MDF FRAMESU
nderpinners
CS One "UNI" Wedge Underpinner and Accessories
The CS ONE Underpinner is a foot-operated machine with an aluminum profile struc-ture and stainless steel table. Its strokes are 140mm (5-1/2") wide and joins mouldings up to 100mm (4"). It is fast and easy to use -- perfect for any shop where compressed air may not be available, or retail locations where compressor noise is not an option.For use with "UNI" wedges. Call for quote
Included Accessories3 Stapling Heads for 7, 10 and 15mm Wedges + 1 Chevron Pressor Set
Optional Accessories Code Description Price
Z25147 Wedges & Accessories Shelf for CS ONE Call
Z25510 Ergonomic and Easy Sliding Stainless Steel Tablefor CS ONE for
Z25496Z25500
Stapling Head for 5mm WedgesStapling Head for 15mm Wedges Quote
Z18065 Magnetic Round Rubber Holder
Z1783Z1791
Yellow Round Rubber for SoftwoodGreen Round Rubber for Hardwood
Common Spare Parts Code Description
Z22003 Wedge Driver for CS ONE
Z22002 Wedge Driver Guide for CS ONE
Z1521 Foot Pedal Cable
Z25494 Adjustable Top Clamp
Z24703 Magnetic Holder for Chevron Pressor
Z21525 Magnetic Chevron Pressor
Z21524 Rubber for Chevron Pressor
Z468 Wedge Positioning Handle
Call for quote
- 30 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sUNDERPINNERS AND ACCESSORIES
Und
erpi
nner
s
Cassese “XL” and “UNI” Underpinners -- All Air-Operated and 190mm Stroke
CS199MXL / UNI Call for quote
CS299MXL2 / UNI Call for quote
CS4008XL / UNI Call for quote
The Cassese “XL” and “UNI” Series of Underpinners features the famous Ultra™ Clamping system. These machines allow a very wide joining capacity -- 190mm stroke (7-1/2”) for mouldings up to 150mm wide (6”).
“UNI” Underpinners use Masters UNI Wedges.Although each of these underpinners is equipped with equally superb state-of-the-art technology, each model is tailored to the requirements of different type of framers.
Underpinner Options Code Description Price
Z7835 Hanger Fixing kit for CS79 Call
Z3212Z3203
6-sided frame adaptator for CS88/89/199/299/40088-sided frame adaptator for CS88/89/199/299/4008
for
Z21476
Z8247
Bar code kit for CS4008XL (includes scanner, cables + connections)Bar code Software + Key for CS 4008XL
Quote
Z22662 Rotating table for CS 199MXL/CS 299MXL2/CS 4008XL
Z21486 Extension arms for CS 199MXL/CS 299MXL2 (already
provided with CS 199MXL and CS 299MXL)
Z22555 Special kit to work at 45° for CS 4008XL & CS 4008 UNI
- 31 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
UNDERPINNER ACCESSORIESU
nderpinner Accessories
Cassese Underpinner Usual Accessories Code Description Price Code Description Price
Z506 Short hammer for all (except CS276, CS810) Call Z21524 Rubber for Chevron
presser Call
Z52 Long hammer for CS276 & CS810 for Z1813 White rubber triangle
for soft wood for
Z1394 Hammer retaining screw Quote Z1814 Black rubber triangle
for hardwood Quote
Z1401 Pedal Z1865 Reversed white rubber triangle for soft wood
Z1406 Pedal Z1866 Reversed black rubber triangle for hardwood
Z1662 Electrical Pedal Z1783 Yellow 30mm rubber bung for softwood
Z3556 Cable for foot pedal of CS59 & CS79 Z1791 Green 30mm rubber
bung for hardwood
Z1521 Cable for foot pedal of CS 88 Z1800 Yellow 45mm rubber
bung for softwood
Z1804 Green 45mm rubber bung for hardwood
Cassese Underpinner Other Accessories Code Description Price Code Description Price
Z420 Wedge Pusher Spring Z6624 Triangle support for CS79
Z772 Wedge Pusher Spring Z6625 Round rubber support for CS79
Z772 Wedge Pusher Spring Z21500 Support for magnetic holders for XL underpinners
Z817 Wedge distribution sub-assembly Z18065 Magnetic round rubber
holder (fits Z21500)
Z1020 Assy Removable Finger Stop Z20027 Magnetic triangle holder
(fits Z21500)
Z826 Assy Wire and Ball Z21523 Magnetic holder for Chevron presser (Z21500)
Z634 Assy Wire and Ball Z21522 Magnetic Chevron presser (fits Z21523)
Z3579 Round rubber holder for CS59/CS85/CS88/CS89 Z6532 Locking pin for Z6624,
Z6625 and Z21500
Z816 Triangle holder + screw for CS59/CS85/CS88/CS89
- 32 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aM
sCUTTING MACHINES FOR FRAME MOULDINGS
Mou
ldin
g Sa
ws
Cassese CS55M Foot-Operated Chopper
The CS55M incorporates the highest standards and engineering experience which rank it among the best foot-operated choppers in the world. The CS55M chopper is the heart of any custom picture framing business -- and where accuracy and quality matter the most, no compromise can be made.
FEATURES OF THE CS55M CHOPPER• Patented spring-loaded rebate supports system• Direct measuring scale• Easy to read• Double width foot pedal• Tool-less, front blade height adjustment• Quiet operation• No dust• Built-in waste chute• Safety Features: Protective safety guards, locator support pins for
blades, anti-slip rubber grip foot pedal
Code Description Price Code Description PriceCS55M CS55M foot operated chopper (in cm) Call Z4465 Comfort rebate measuring system (in mm) CallCS55M-IMP CS55M foot operated chopper (in inches) for Z7743 Removable stop forZ3326 Standard Blades (a pair) in wooden box Quote Z9942 Rebate supports for Morso choppers QuoteZ3327 Reversible Blades (a pair) in wooden box
Z4000 Rebate supports - Jyden/Hansen choppersZ3269 Left-hand moulding supportZ4055 Right-hand measuring extension (+80cm)Z4209 Right-hand measuring extension (+32'')
Cassese CS960 Hand-Operated Double Mitre Saw
The CS960 is the new generation of saws from Cassese: wider and higher cuts, concrete base and cast iron cutting heads for perfect quality cuts and maximum reliability. CS960 is the safest and most accurate hand operated double mitre saw available in the market.
FEATURES OF THE CS960 SAW• Wider cuts : 160mm (6” 1/3)• Higher cuts : 110mm (4” 1/3)• Available in 400V triple phase or 230V triple phase• Horizontal cutting stroke• Foot-operated pneumatic clampings• Hand-operated cutting stroke• 45° measuring scale.... And much more...
Code Description PriceCS960 Hand-operated Double Mitre Saw 400V 3-phase CallCS960220T Hand-operated Double Mitre Saw 230V 3-phase forZ15730 Right and Left-hand vertical clamps - NO LONGER OPTIONAL, included in CS960 QuoteZ1570 Carbide blade 350mm (14'')Z14484 Removable stop for shorter cutsZ15731 Additional right-hand measuring extension + 100cm (40'')Z15732 Additional right-hand measuring extension + 200 cm (80'')Z16146 Plug for dust collector for CS 960 230V or 400V 3-phase
- 33 -Art Materials Service • 625 Joyce Kilmer Avenue • New Brunswick, NJ 08901 • USA
Phone: 732-545-8888 or USA free 888-522-5526 Fax: 732-545-9166 Web: www.ArtMaterialsService.com29.Nov.21
aMs
MITRE SAWS FOR FRAME MOULDINGSM
oulding Saws
Cassese CS969 Automatic Double Mitre Saw
The CS969 is usefully succeeding the very popular CS 939: wider and higher cuts, concrete base and cast iron cutting heads for perfect quality cuts and maximum reliability. CS969 is the safest and most accurate automatic double mitre saw available in the market.
FEATURES OF THE CS969 SAW• Wider cuts : 160mm (6” 1/3)• Higher cuts : 110mm (4” 1/3)• Available in 400V (± 5%) triple phase or 230V (± 5%) 1x or 3x
phase• Horizontal and Automatic cutting stroke• 4 pneumatic clamps and 45° measuring scale... And more...
Code Description PriceCS969 Electro-Pneumatic Double Mitre Saw 400V 3-phase CallCS969220T Electro-Pneumatic Double Mitre Saw 230V 3-phase forZ1570 Carbide blade 350mm (14'') QuoteZ14484 Removable stop for shorter cutsZ15731 Additional right-hand measuring extension + 100cm (40'')Z15732 Additional right-hand measuring extension + 200 cm (80'')Z24300 SmartStop™ automatic measuring stop for CS 969 (measuring capacity = 2m / 80'')Z18220 Extension of 1m for SmartStop™ (total measuring capacity = 3m / 120'')Z24250 Numeric and Programmable Vertical Clamps for SmartStop™Z8241 Bar code kit for CS 969 SmartStop (includes scanner + cables and connections)Z8247 Bar code Software + Key for CS 969 SmartStopZ19147 Left and right clamps for aluminium
Cassese CS999 High-Speed Double Mitre Saw
The Cassese CS999 Saw has been specifically designed for the high-volume contract framers. This saw delivers the fastest production capacity possible from a single machine, and has been recognized as the fastest automated double mitre saw on the market. The CS999 offers the highest level of productivity, without compromising quality.
FEATURES OF THE CS999 SAW• Fast and Adjustable speed control• 350mm (14” inches) blades• Vertical cutting stroke• Cast iron internal structure and Concrete base• Horizontal & Vertical pneumatic clampings• 45° measuring scale... And much more...
Code Description PriceCS999 High-Speed Double Mitre Saw 400V 3-phase CallCS999220T High-Speed Double Mitre Saw 230V 3-phase forZ1570 Carbide blade 350mm (14'') QuoteZ14484 Removable stop for shorter cutsZ15809 Additional right-hand measuring extension + 78cm (+30'')Z15810 Additional right-hand measuring extension + 2 m (+80'')Z15751 SmartStop™ automatic measuring stop for CS 999 (measuring capacity = 2m / 80'')Z18220 Extension of 1m for SmartStop™ (total measuring capacity = 3m / 120'')Z19310 Bar code kit for CS 999 SmartStop (includes scanner + cables and connections)Z8247 Bar code Software + Key for CS 999 SmartStop
top related