product end-of-life disassembly instructionsh22235.€¦ · 2. remove gfx and cpu cooler (see...
Post on 19-Oct-2020
1 Views
Preview:
TRANSCRIPT
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions Product Category: Personal Computers
Marketing Name / Model [List multiple models if applicable.]
OMEN X by HP Desktop PC 900
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description Notes
Quantity of items included in product
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
5
Batteries All types including standard alkaline and lithium coin or button style batteries
1
Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm
Includes background illuminated displays with gas discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height
7
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)
HDD Fan 170g and PCI Fan 170g and PSU fan and CPU LC FAN 290g and GFX LC FAN 170g
6
Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing refractory ceramic fibers
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Tool Description Tool Size (if applicable)
Screw driver Hex 2.5
Micro shear
Screw driver PH2
Screw driver PH1
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove Top cover. (see Figure 1-2) 2. Remove Gfx and CPU cooler (see Figure 3-6 ) 3. Remove MB (see Figure 7-9) 4. Remove the DIMM,CPU and Battery (see Figure 10-13) 5. Remove the MB tray (see Figure 14) 6. Remove the Function Board (see Figure 15-16) 7. Remove the HDD (see Figure 17-18) 8. Remove the ODD (see Figure 19-21) 9. Remove the Voodoo grille light board (see Figure 22-23) 10. Remove the Front lighting board (see Figure 24-26) 11. Remove the Rear Bezel (see Figure 27-30) 12. Remove the Antenna cable (see Figure 31) 13. Remove the HDD FAN (see Figure 32) 14. Remove the FRONT_TOP_FILTER (see Figure 33) 15. Remove the PCI FAN (see Figure 34) 16. Remove the ODD SATA cable (see Figure 35-41) 17. Remove the HDD SATA cable (see Figure 42-43) 18. Remove the EXTEND POWER CORD (see Figure 44) 19. Remove the PSU from chassis (see Figure 45-48) 20. Remove the Electrolytic Capacitors from PSU board HP P/N: 854201-003 (DPS-1300AB-5 A) (see Figure 49-60) 21. Remove the Electrolytic Capacitors from PSU board HP P/N: 854200-004 (Niagara 600W) (see Figure 61-73) 22. Remove the CPU LC FAN (see Figure 74-75) 23. Remove the GFX LC FAN (see Figure 76)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure1 Press the button on rear bezel
Figure2 Remove the top cover
Figure3 Release 12 screws
Figure4 Release GXF and GFX bracket screw and cable then remove GFX card LC
Figure5 Unplug the cable of fan and pump
Figure6 Release the CPU Pump screw to remove CPU LC
EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure7 Unplug all cable conn from PCA.
Figure8 Release 8 pcs screws from PCA
Figure9 Remove PCA from chassis
Figure10 Push the hooks on both sides and then pick up the memory
Figure11 Rotate the handle and open it up
Figure12 Remove the CPU from board
EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure13 Remove the battery from the PCA
Figure14 Release 2 pcs screws from MB tray and take off MB tray
Figure15 Unplug all cable conn from function board PCA
Figure16 Release 5 pcs screws from function board PCA
Figure17 Open HDD Door and PUSH HDD locker to left
Figure18 Pull up HDD cage and release 4 screws to remove HDD
EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure19 Use pin to open ODD Tray
Figure20 Release ODD latch and hold
Figure21 Press ODD unlock bar to PUSH off ODD
Figure22 Open Voodoo grill cover
Figure23 Disconnect cable
Figure24 Remove Front bezel
EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure25 Remove Tape and unplug cable connect
Figure26 release 14 screws to remove 3 front light board
Figure27 Release 4 screws from rear cover
Figure28 Remove Rear PSU Grille
Figure29 Release 1 screws from AC_IN connect
Figure30 Remove Rear cover
EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure31 Release 4 screws from 2 Antenna cable and remove it
Figure32 Release 4 screws from HDD FAN and remove it
Figure33 Remove FRONT_TOP_FILTER
Figure34 Release 4 screws from PCI FAN and remove it
Figure35 Release 1 screw and take off cable holder
Figure36 Release 2 screws from rear side
EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure37 Release 2 screw at front side
Figure38 Arrange all the cables those through the POWER PARTITION
Figure39 Release 2 screw at the bottom of power partition
Figure 40 Rotate and take off power partition
Figure41 Release 2 screw from power partition and remove ODD cable
Figure42 Release 4 screw to remove 2 HDD SATA BKT
EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure43 Release 4 screw and remove 2 HDD SATA cable
Figure44 Release 1 screws and unplug connect to remove extend power cord
Figure45 Release 3 screws
Figure46 Pull out PSU
Figure47 Release 4 screw and remove psu bkt
Fig 48
EL-MF877-00 Page 11
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Fig 49 Remove screws for top
Figure50 Remove screws for back
Figure51 Remove screw for profile
Figure52 Disconnect fan connector
Figure53 Cut the cable tie
Figure54 Cut the cable tie
EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure55 Remove FG screw
Figure56 Remove MAIN PCB screw
Figure57 Remove AC inlet screw
Figure58 Remove component for MAIN PCB (C801A/C801B/C801C diameter or height are more than 25mm)
Figure59 Remove fan screw
EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure61 Cut the cable tie
Figure62 Remove screw for bottom
Figure63 Remove screw for top
Figure64 Remove cover
Figure65 Remove FG screw
Figure66 Remove PCB2 screw
EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure67 Remove plastic cover for PCB2
Figure68 Remove L/N wire & jump wire use solder iron
Figure69 Disconnect fan connector
Figure70 Remove PCB1 screw
Figure71 Remove plastic cover for PCB1
Figure72 Remove AC inlet & Fan screw
EL-MF877-00 Page 15
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure73 Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it
Figure74 Release 4 screw from CPU LC Fan Guard
Figure75 Release 4 screw between Fan and radiator then remove CPU LC FAN
Figure76 Release 4 screw between Fan and radiator then remove GFX LC FAN
top related