printable grad party pack...print and then cut out the circles on the following pages. adhere...

GRADUATION CELEBRATION Facebook Live | #TCUgrad2020

PRINTABLE GRAD

PARTY PACK Water Bottle labeL

CUPCAKE TOPPERS

SPECIALTY DRINK RECIPES

Class of 2020 BANNER

Picture frame mat

MORTAR BOARD DECOR TEMPLATES

SHARABLE INVITE

PHOTO BOOTH PROPS

Water Bottle labeL

Cupcake toppers

DirectionsPRINT and THEN CUT OUT THE CIRCLES

ON THE FOLLOWING PAGES.

Adhere TOOTHPICKS TO BACK WITH tAPE.

Place in cupcake. TADA.

Frog-a-ritaIngredients• 1-1.5 oz premium Tequila

• .5 cup sweet and sour mix

• 1-1.5 OZ raspberry flavored liqueur

(such as Chambord)• 1 lime wedge

• Ice

• Coarse Salt

DirectionsSalt the rim of a large margarita glass.

To do so, pour salt onto a small plate, moisten

the rim of the glass on a damp towel and press

into the salt. In a cocktail mixer full of

ice, combine tequila, Sweet and sour mix,

raspberry liqueur and shake vigorously.

strain into salted rimmed glass. Garnish

with lime wedge.

THE 1873 Ingredients• 1 oz Chambord

• 1 oz premium Tequila

• 1 oz Triple Sec

• 1 oz fresh-squeezed lime juice

• Crushed ice

DirectionsCombine all of the ingredients in

a cocktail shaker. Shake well and

strain into a chilled glass.

Yield: 1 serving

SPECIALTY DRINK RECIPES

Lavender Lemon

FROG SPritzIINGREDIENTS6 cups water divided

1/2 cup sugar

1/4 cup honey

3 Tbsp dried lavender

2 cups lemon juice

Lemon slices and

lavender petals for garnish

Purple food coloring (optional)

Directions 1. Over medium heat, combine two cups of water and sugar,

bringing to a boil until sugar is dissolved. Turn off of the

heat and stir in honey and lavender.

2. Allow mixture to steep for 2 hours (less if you want less of

a lavender taste). Strain the liquid, pressing the lavender

down to make sure you get all of those juices into your

mixture!

3. In a large pitcher, combine freshly squeezed lemon juice,

lavender mixture and water.

4. Feel free to add a couple drops of purple food to give it a

TCU flair.

5. Serve over ice.

SPECIALTY DRINK RECIPES

CL A S

S

OF

2 0 20

CLASS Of 2020 banner

CL

AS

SOF

20

20

8 x 10 frame 5 x 7 area for photo

either cut this center piece outor tape your 5 x 7 photo here

8 x 1

0 fr

ame

5 x 7

area

for p

hoto

eithe

r cut

this

cent

er p

iece o

utor

tape

your

5 x

7 ph

oto

here

MORTAR BOARD DECOR TEMPLATES

MORTAR BOARD DECOR TEMPLATE 1.1

Graduation Cap Template for 8.5”x11” Paper

Print both of the template sides at 100% scale.

Cut along the dotted lines. Connect both pieces of the template

and make sure to leave a slit open between an edge and the button hole in order to slide on to your cap.

Attach to your cap with double-sided tape or glue.

You can use decorative ribbon, tape,

etc. to cover the space between the raw edge and sides.

MORTAR BOARD DECOR TEMPLATES 1.2

MORTAR BOARD DECOR TEMPLATE 2.1

Graduation Cap Template for 8.5”x11” Paper

Print both of the template sides at 100% scale.

Cut along the dotted lines. Connect both pieces of the template

and make sure to leave a slit open between an edge and the button hole in order to slide on to your cap.

Attach to your cap with double-sided tape or glue.

You can use decorative ribbon, tape,

etc. to cover the space between the raw edge and sides.

MORTAR BOARD DECOR TEMPLATE 2.2

MORTAR BOARD DECOR TEMPLATE 3.1

Graduation Cap Template for 8.5”x11” Paper

Print both of the template sides at 100% scale.

Cut along the dotted lines. Connect both pieces of the template

and make sure to leave a slit open between an edge and the button hole in order to slide on to your cap.

Attach to your cap with double-sided tape or glue.

You can use decorative ribbon, tape,

etc. to cover the space between the raw edge and sides.

MORTAR BOARD DECOR TEMPLATE 3.2

PHOTO BOOTH PROPS