precursor-derived nanostructured sic-based materials for ... · 21/04/2016  · precursor-derived...

Precursor-Derived Nanostructured SiC-Based Materials for MHD Electrode Applications

Program Manager: Dr. Jason Hissam

YiHsun Yang*, Fumio S. Ohuchi (PI)*, Amir H. Tavakoli**, and Rajendra K. Bordia(Co-PI)**

Department of Materials Science and Engineering*University of Washington

Box 352120, Seattle, WA 98195

** Clemson UniversityClemson, SC 29634

Grant No. DE-FE0023142April 21, 2016

• Withstand MHD environments:– Oxidation resistivity at high temperature– ion bombardment – plasma impingement– Mechanical thermal stability

• Conformal process• Low resistivity

1

Technology advancements may bring newopportunities for legacy projects1974SiC

Reference: R-1656-ARPA Dec 1974 report by George Rudins)

ZrB2+SiC• Withstand MHD environments:– Oxidation resistivity at high temperature– ion bombardment – plasma impingement– Mechanical thermal stability

• Conformal process• Low resistivity

Hot plasma

To develop a novel class of SiC based ceramic composite materials with tailored compositions for channel applications in MHD generators.

Controlling and understanding the effect of the nature of the excess carbon and boron additive on the structural and electrical properties.

Role of excess carbon and boron Polymer based synthesis Structural information Electrical resistivity Work function from thermionic emission

2

Long term goal

Today’s Focus

Lead: Prof. R. Bordia

Lead: Prof. F. Ohuchi

TASK 1: PROCESSING AND STABILITY OF NANOSTRUCTURED SI-C-X CERAMICSSub-Task 1.1: Effect of stoichiometry and temperature on the nanostructureSub-Task 1.2: Effect of temperature and stress on the stability of the nanostructure

TASK 2: MECHANICAL AND THERMAL PROPERTIES OF NANOSTRUCTURED SI-C-X CERAMICSSub-Task 2.1: Modulus, strength toughness, and thermal diffusivity Sub-Task 2.2: Compressive creep

TASK 3: ELECTRICAL PROPERTIES OF NANOSTRUCTURED SI-C-X CERAMICSSub-Task 3.1: Effect of C/Si ratio on room and elevated temperature electrical

conductivitySub-Task 3.2: Combinatorial selection of X and effect of X on room and elevated

temperature electrical conductivity

TASK 4: SURFACE ENGINEERING OF NANOSTRUCTURED SI-C-X CERAMICSSub-Task 4.1: Surface modification to enhance thermionic emissionsSub-Task 4.2: Changes of surface/sub-surface structure and chemistry by high

density plasma irradiation.

Sub-Task 4 3: Simulation of plasma interactions

Project Team Tasks

3

4

Diversity of silicon based precursors• Liquid form polymer can be mixed homogeneously• Silicon / carbide ratio could be adjusted through precursors• Boron, nitrogen and oxygen can be easily incorporated• Relatively low process temperature

Easy of Process for Polymer DerivedCeramics (PDCs)

5P. Colombo, G. Mera, R. Riedel, and G. D. Sorarù, J. Am. Ceram. Soc. 93, 1805 (2010)

Process temperature:

Selection of polymer and processing• Precursor: SiC forming Allylhydridopolycarbosilane (Starfire® SMP-10)• Two processes has been developed

6

Hot press

Polymer infiltration pyrolysis

SiC forming polymer(polycarbosilane SMP-10)

Carbon additive(divinylbenzene)

Sintering aid additive(decaborane)

Thermal cross-linking T = 400 oC

Cured polymer

Polymer power

grinding

SiC/C composite Pressed pellet

Pyrolysis T = 900 oC

Ultrafine powder

milling

SiC/C monolith

SiC/C monolith

Cold press

Hot pressing T = 2130 oC

Polymer infiltration Pyrolysis (PIP)

T = 1700 oC

Carbon additive:Improve electric conductivity

Boron additive:densification

Effects of different additives for polymer derived ceramics (PDCs)

Effect of dopants on the density of the hot-pressed samples:

7

Sample ID Extra carbon Boron Bulk Density (g/cm3)

Relative Density (%)

nominal measured nominal measured0B0C 0 0 1.76 54.80B1C 1 0 2.8 87.2

1B2.9C 0 1.7(2.9)* 1 0.4 (0.8) 3.05 ± 0.09 95.9 ± 2.8*1B3.9C 1 2.2(3.9) 1 0.4 (0.8) 3.15 ± 0.03 99.4 ± 0.9*1B9.5C 5 5.6(9.5) 1 0.4 (0.8) 2.93 ± 0.06 94.2 ± 1.9*

wt%, mol% in parenthesis. Error is two standard deviation of the mean*Excess carbon from polymer precursor**Density is calculated based on the theoretical density of silicon carbide and graphite

Two phases matrices and elongated grains by Scanning Electron Microscopy (SEM)

8

Polishedsurface

~ 1500 X

FracturedSurface~1000 X

1B2.9C 1B3.9C 1B9.5C

Boron wt%

Carb

on w

t%

9.5%

3.9%2.9%

Grain morphology and local crystallinity by Transmission electron microscopy (TEM)

9

1B2.9C

1 μm

(fully crystalline) (Mostly crystalline) (Minor amorphous regions)

1B9.5C

1 μm

1 μm

1B9.5C

0.5 μm

1B2.9C

0.5 μm

1B9.5C

Boron wt%

Carb

on w

t%

9.5%

3.9%2.9%

The XRD analysis confirms the existence of 6H-SiC but is not enough for the complete identification of SiC polytypes.

Provides information for crystallized part; what if it is not fully crystallize? 10

Bulk crystallinity –X-Ray Diffraction

SiC1B9.5C

SiC1B3.9C

SiC1B2.9C

graphite

Solid state NMR provides bulk information for the chemical environment of the interested element.

Three characteristic chemical shift for 6H polytype.

Minor 3C polytype was found in some samples.

No silicon oxide peak. The NMR characterization

confirms the dominance of 6H-SiC for the three samples.

12

Structural analysis by nuclear magnetic resonance (NMR) spectroscopy

SiC1B0CSiC1B1CSiC1B5C

6H-SiC

3C-SiC

1B2.9C

1B3.9C

1B9.5C

• We need to have the ability to measure the electrical conductivity / resistivity at elevated temperature.

• Standard commercial equipment does not lead us to over 700 oC – ZEN-3 Seebeck Coefficient / Electric Resistance

Measuring System from ULVAC Technologies, Inc.

13

How is the ceramic going to behave above 1000 oC ?

We make one on our own!!!

Development of an “in-situ” measurement technique of dc-conductivity

Ma, F. Ph.D. Thesis 2015

Version 0 Version 1

Operation condition:

Version 0: Custom made box furnace, made with nichrome heating filament and aluminum cage with active water cooling. Capable up to 700 oC.

Version 1: Alumina plate, Moly screws and nuts, design for tube furnace. Capable up to 1000 oC.

14

Development of an “in-situ” measurement technique of dc-conductivity Commercial 1700 C tube furnace Platinum lead, graphite contact

and alumina support Pseudo-four-point probe (Kelvin

probe) technique is applied. Control by LabVIEW

1700oCTube furnace

Ar Tank

Electrometer and current

source

PC for data acquisition

15

Boron wt%

Carb

on w

t%

Effect of boron and carbon additive on electrical resistivity

0.1

1

10

100

1000

Res

istiv

ity (Ωc

m)

18001600140012001000800600400

Temp. (K)

1B2.9C (96%)

1B3.9C (99%)

1B9.5C (94%)0B1C(87%)

Fact: Carbon additive

lowers resistivity Boron additive helps

densification

Finding Boron additive tends

to increase resistivity unless huge amount

of extra carbon to compensate

9.5%

3.9%2.9%

Commercial SiC

50 s/m

Integrated HV chamber for surface modification and analysis

CMA

Retarding Grid

XPS

Sample apparatus

AES

TE

K source

Optical pyrometer

Integrated HV system:• Retarding grid spectroscopy to measure

thermionic emission (TE)• X-ray photoelectron spectroscopy (XPS)• Auger electron spectroscopy (AES)• K deposition for work function

engineering• R-type TC and optical pyrometer for

temperature measurement• Ion gun for surface cleaning

Capable of measuring: • Surface composition at elevated temp.• Total current and kinetic energy

distribution of thermionic emission.• Work function

17

Ar

Ion gun

Surface self-regenerate under high temperature annealing

Ar

18

40

30

20

10

0

-10

dN(E

)/dE

, Int

ensi

ty (A

rb. U

nit)

500400300200100Electron Energy (eV)

PDC-SiC

Thin oxideThin oxideSurface organics

PDC-SiC

Self-regenerated graphite layer!!

Si LVV C KVV N KVV O KVV

As installedSputtered 30 mins

Sputtered 60 mins560 oC660 oC700 oC750 oC800 oC850 oC

5 Å10 Å

Auger electron spectroscopy for 1B9.5C

Ar

• Electric arcing or arc discharge: An electrical breakdown of gas.– It produces plasma discharge and often damage

the surface.

• Thermionic emission: an electron emission due to thermal activation.– A physical process that the amount of emitted

electron is determined by work function.

19

A common failure reason for MHD channel electrodes - Arcing

What is work function and how do we measure it experimentally?

Energy

EF

Vacuum level

1.0 0.0 Fermi-Dirac Distribution

Population Density

E0

Φ

Energy

V0

Thermionic emission (TE) and Richardson-Dushman eq.

20

A0-200V

-

-+

+

+20V

ComputerLabVIEWe

sample

Front view of electron grid

Workstation for data acquisition

-44

-42

-40

-38

-36

-34

-32

-30

-28

LN(I t

h/T2 ) (

A/K2 )

950x10-69008508007507006506001/Temp. (1/K)

'SiCSC_ab_2_LN(Ith/Tsq)'Φ = 4.00 eV

'SiCSC_ab3_1_LN(Ith/Tsq)'Φ = 4.02 eV

'SiCSC_ab_1_LN(Ith/Tsq)'Φ = 4.39 eV

-44

-42

-40

-38

-36

-34

-32

-30

-28

LN(I t

h/T2 ) (

A/K

2 )

950x10-69008508007507006506001/Temp. (1/K)

'SiC_D_3_LN(I/T2)'Φ = 4.14 eV

'SiC_D_1_LN(I/T2)'Φ = 5.52 eV / 4.36 eV (at HT zone)

'SiC_D_2_LN(I/T2)'Φ = 4.34 eV

1000x10-12

800

600

400

200

0

Em

issi

on C

urre

nt (A

)

140012001000800Temp. (

oC)

800x10-9

600

400

200

0

Em

issi

on C

urre

nt (A

)

140012001000800

Temp. (oC)

Work function converges for all samples after annealing

As installed

Annealed

Sputtered

4.39 eV

4.00 eV

4.02 eV

5.52 eV

4.34 eV

4.14 eV

As installed

Annealed

sputtered

Single crystal SiC

Work function:

Work function gradually converged to ~4 eV (graphite)

Work function:

SiC: 1B3.9C

22

Future plan for further tailoring work functionIn-situ potassium deposition

C.-K. Choo, D. Suzawa, and K. Tanaka, Surf. Sci. 600, 1518 (2006)

• Potassium deposition on Si substrate

23

• A new type of silicon carbide / carbon composite synthesized from polymer derived synthesis.

• Electrical resistivity of PDC SiC/C can be tailored by different carbon contain.

• The surface of SiC/C composite has unique property that grows graphite and can be self-regenerated.

• Work function measured through thermionic emission.

• High temperature mechanical properties is on going.• In-situ alkali metal deposition for work function

engineering is on going.• ICE plasma source has been constructed, ready to be

incorporated.

Summary of this project

Thank you!

24