ppt of solar naveen' `11

SUMMER INTERNSHIP REPORTON

“SOLAR POWER PLANT & SOLAR ENERGY

GOVERNMENT ENGINEERING COLLEGE BANSWARA,BEHIND MAYUR MILL ,DUNGERPUR ROAD

Rajasthan – 327001

Naveen Bhati

4th Year (B.Tech 7th Semester) ELECTRICAL ENGINEERING

13EGBEE018

GOVERNMENT ENGINEERING COLLEGE BANSWARA (RAJASTHAN)

RTU Kota

Under the guidance of Mr. Bhawani singh

INTRODUCTION ABOUT THE COMPANY

COMPANY PROFILEPrime Vision Automation Solutions Pvt. Ltd.

Prime Vision Automation Solutions Pvt. Ltd. is an ISO Certified 9001: 2008 company, provides complete services & solutions on Industrial Automation, Embedded & robotics system and solar PV system that customers have relied upon for years easy

to use and that gives the flexibility to choose your level of investment.

Prime Vision Automation Solutions Pvt. Ltd. is an ISO Certified 9001: 2008 company, provides complete services & solutions on Industrial Automation, Embedded & robotics system and solar PV system that customers have relied upon for years easy to use and that gives the flexibility to choose your level of investment.

SOLAR RADIATION

The portion of the incident solar radiation which comes directly from the apparent solar disc is called Direct or Beam Radiation.

The solar radiation received from the sun after reflection and scattering by the atmosphere is called Diffuse radiation.

Total radiation=diffused radiation + direct radiation

VIEW OF SOLAR RADIATION

Photo-Voltaic The conversion of solar radiation into electrical energy takes place by exploiting the effect induced by a luminous flux which invests a semiconductor material 'doped', very often silicon. This physical phenomenon is what occurs in photovoltaic cells .

Conversion efficiency The energy exploited depends on the characteristics of the material of the cell: the conversion efficiency (percentage of energy contained in the solar radiation that is converted into electricity available at terminals) for commercial silicon cells is typically between 10% and 17%, while laboratory cells have reached values of 24% .

SOLAR

CELL TECHNOLOGY

Crystalline Silicon solar cells Single, Multi, Ribbon Concentrating solar cells Si, GaAs

PV COMPONENT

CELL MODULE ARRAY STRING

TYPES OF SOLAR PV CELL

CRYSTALLINE SI BASE THIN FILM PV SPECIAL TYPE

MONO-CRYSTALLINE AMORPHOSE GA-AS TYPE

POLY-CRYSTALLINE CD-TE CI-GS

monocrystalline :Solar cell is a dark black colour, and the corners of cells are usually missing as a result of the production process and the physical nature of monocrystalline silicon. The efficiency of mono is 19 -25%.

Polycrystalline :on the other hand, is identifieable by its signature light or dark blue colour, but not uniformly so: some patches are lighter than others. The differences in appearance come about as a result of the manufacturing process. The efficiency of poly is 14 – 18%.

SOLAR COLLECTORSIn most of the devices utilising solar energy, the solar energy in the radiant energy form is converted in to heat energy using mechanical devices known as solar collector. The solar collector absorbs incident solar radiation and transfer the energy to a fluid passing in contact with it.

FLAT PLATE COLLECTOR In flat-plate collectors there is no optical concentration of sunlight and

they are generally stationary . In addition to this their outlet temperature capability is below 100 °C.A flat plate collector is basically a black surface that is placed at a convenient path of the sun.

USE OF FLATE PLATE TYPE CELL

FOCUSSIN COLLECTORS

1. In concentrating solar collectors the incident solar energy is reflected and made to concentrate at a convenient point.They are classified by -

1.1 According to type of reflecting medium:

1.1.1 parabolic, spherical or flat concentrators

1.2 According to the optics :

1.1.2 point focus system, line focus system

parabolic, spherical or flat concentrators

point focus system

line focus system

Solar collecto

r

Hea

t ex

chan

ger

Turbine

~

Condenser

pump

VIEW OF LOW TEMPERATURE COLLECTOR

APPLICATION OF SOLAR PV POWER PLANTS

HOMES

COMMERCIAL USE

STREET -LIGHT

SOLAR PUMPING

SOLAR POWER FOR TELE-COMMUNICATION

WATER HEATING

SOLAR CARS

DAY-LIGHT AGRICULTURE

APPLICATIONS OF SOLAR ENERGY

SOLAR WATER HEATER

SOLAR COOKER

SOLAR STREET LIGHT SOLAR WATER PUMP

SOLAR POWER PLANT MAINLY TWO TYPES

1. OFF-GRID SYSTEM 2.ON-GRID SYSTEM

OFF GRID SYSTEM-

We design and develop a comprehensive range of Off Grid Solar Power Plant – Domestic. This device is attached to a battery through a charge controller. This inverter supplies AC power, allowing the use of normal electrical appliances. This system is ideal for electricity access to isolated areas (mountain huts, developing countries).

OFF GRID SYSTEM

On Grid Solar Power Plant

Clients can avail from us a very inclusive variety of On Grid Solar Power Plant –Industrial. This range Creates huge photovoltaic electricity at aparticular point. The scope of these plants varies from several hundred kilowatts to several megawatts. This device finds application in large industrial buildings such as airport terminals or railways stations..

1. ASSURE GENUINE SPARES

2. LONG LIFE UP TO 25 YEARS

3. CENTRAL MONITERING SYSTEM

4. LOW MAINTANANCE, HIGH EFFICENCY

5. INVESTMENT RETURN 6 YEARS

6. NO POLLUTION, ECO FRIENDLY

7. CENTRAL SCADA MONITERING SYSTEM

8.ELECTRICAL BACK UP FOR NON SUNNY DAYS

On Grid Solar Power Plant

VIEW OF ON GRID POWER PLANT

• Jawaharlal Nehru National Solar Mission is one of the major global initiatives in promotion of solar energy technologies, announced by the Government of India under National Action Plan on Climate Change.

• Mission aims to achieve grid tariff parity by 2022 through

• Large scale utilization and rapid diffusion and deployment of solar technologies across the country at a scale which leads to cost reduction

• R&D

• Local manufacturing and support infrastructure

Jawaharlal Nehru National Solar Mission

Advantages of Solar Energy• Clean

• Sustainable

• Free

• Provide electricity to remote places

Disadvantages of Solar Energy

• Less efficient and costly equipment

• Part Time

• Reliability Depends On Location

• Environmental Impact of PV Cell

Outline SCADA

What is SCADA??

History of Scada

Common Components of Scada

System Components of Scada

Future trends in Scada

SupervisoryControl AndDataAcquisition

Scada is ” SCADA is a system operating with coded signals over communication channels so as to provide control of remote equipment (using typically one communication channel per remote station).”

Main Functions of

SCADA Data

AcquisitionNetworked Data Communication

Data Presentation Control

SCADA SYSTEM

RTU(remote terminal unit)

User interface (HMI)

PLC

CommunicationsEquipment and software

Data Acquisition Server

System Concept of SCADA

FUTURE TRENDS IN SCADAFirst generation: "Monolithic“

Second generation: "Distributed“

Third generation: "Networked"

FUTURE

USE OF SCADA IN ELECTRICAL POWER SYSTEM

Automation Tasks

• Data acquisition• Power System

Supervision• Power System

Control• Power System

Automation• I&C System IEDs

INTELLIGENT ELECTRONICS DEVICS

Any device incorporating one or more processors with the capability to receive or send data/control from or to an external source (e.g., electronic multifunction meters, digital relays, controllers)

Instrument Transformers

Instrument transformers are used to sense power system current and voltage values. They are physically connected to power system apparatus and convert the actual power system signals, which include high voltage and current magnitudes, down to lower signal levels

Transducer

Transducers convert the analog output of an instrument transformer from one magnitude to another or from one value type to another, such as from an ac current to dc voltage.

Communications Port Switch

A communications switch is a device that switches between several serial ports when it is told to do so. The remote user initiates communications with the port switch via a connection to the substation, typically a leased line or dial-up telephone connection. Once connected, the user can route their communications through the port switch to one of the connected substation IEDs. The port switch merely “passes through” the IED communications.

Meter

A meter is an IED that is used to create accurate measurements of power system current, voltage, and power values. Metering values such as demand and peak are saved within the meter to create historical information about the activity of the power system.

Digital Fault Recorder

A digital fault recorder (DFR), is an IED that records information about power system disturbances.It is capable of storing data in a digital format when triggered by conditions detected on the power system. Harmonics, frequency, and voltage are examples of data captured by DFRs.

Load Tap Changer (LTC)

Load tap changers are devices used to change the tap position on transformers. These devices work automatically or can be controlled via another local IED or from a remote operator or process.

Automation Process

Advantages Flexible

simple

reliable

Efficient with less manpower

Self-checking and readability

Disadvantages

Troubled alarms

Lack of trained personals

Initial capital investments

Automatic generation control

In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load.

Conclusion

So the solar plant is the most convenient part of the india we should all together work for this project. As my view I want to you interest in solar power plant to save the energy. The government of India has decided to integrate all the state power utilities. Unified load dispatch Centre has to be build. So automation has lot more advantages as it increases efficiency and increase standardization. India is moving ahead toward automation are you??

ANY QUERIES ???

To all kind and attention