part no. description price part no. description pricegreenhillmfg.com/htdocs/partlist_white.pdf ·...
Post on 04-Feb-2021
14 Views
Preview:
TRANSCRIPT
-
Part No. Description Price Part No. Description Price
ELECTRONIC INTERMINTENT CONTROLDG2100S Digi-Cool Controller $359.00Digital electronic controller, Two Stages adjustable from 0 to 99, OF or OC, On and OffTimes from 0 to 99 minutes, indefinite memory of settings, features Smart-Scan. Comes with G240-15B pressure regulator(15 PSI).DG2100T Real-Time Controller $395.00Same as DG2100S above, but comes with Real Time Clock. Also comes with Enable and Disable Times from 12:00AM to 11:59PM.
DG2100S-CT With Stir Fan Port $479.00
Same as DG2100T above, but comes with stir fan relay port and fuse.
DG2100ST Real-Time Sequencer $435.00Digital electronic controller, up to Four Sequenced Zones adjustable from 0 to 99, OF or OC, On and Off Times from 0 to 99 minutes, indefinite memory of settings, features Smart-Scan. Use with GSV24 valve assembly.
GSV24 Sequencer Valve Assm. $57.9524V valve assembly for DG2100ST. Comes with G240-15B preset pressure regulator(15 PSI), G360-24 24V solenoid valve and GFF3/4 flushable filter.
GC1200 Analog Controller $249.00Three user adjustments: On Time 0 to 60 minutes, Off Time 0 to 60 minutes, Actuation Temperature 40O to 100OF. Comes with G240-15B preset pressure regulator(15 PSI).
GC1212 12 Hour Controller $259.00Three user adjustments: On Time 0 to 15 minutes, Off Time 10 minutes to 12 hours, Actuation Temperature 40O to 100OF. Comes with G240-15B preset pressure regulator(15 PSI).NOTE: All controllers with valves come with 2 G220 ¾” swivel adapters and preset pressure regulator.
Automatic controls save labor !!MANUAL CONTROLLER
GC100 $45.00GFF3/4 flushable filter and G240-15B pressure regulator(15 PSI).
KITS
GK100C Drip Cooling Kit With Close-Off $55.00
Includes 100' of G120 ¼" tubing, 20 G130T 1 GPH drippers, 20 G138 ¼" close-offs, and 20 G210 ¼" connector barbs.GK105C $55.00Same as GK100C, but with G135T ½ GPH drippers.
GK110 Spray Cooling Kit $49.00Includes 12 G140 spray nozzles, 8 G150 rotary spray nozzles, and 12 G440 adjustable nozzles.NOTE: All above kits come with 100’ of G110 ½” tubing, 2 G160 ½” close-offs, G170 ½” tee barb, G190 ½” elbow barb, G200 ½” connector barb, G220 ¾” swivel adapter, 30 G260 loop clamps, 34 G270 screws, G283 economy hole punch, 6 G290 hole plugs, and 25 G320 nylon ties.
WIRE
G100-5050' Galvanized steel wire, 16 gauge. $5.50
TUBING
G110 100' ½" polyethylene (0.620 OD x 0.520 ID). $19.80
G110-1000 1000' ½" polyethylene (0.620 OD x 0.520 ID).$181.5
0
G110-50 50' ½" polyethylene (0.620 OD x 0.520 ID). $15.00
G120100' ¼" soft black vinyl(0.220 OD x 0.160 ID). $8.00
GPT250 ¼" polyethylene (0.35OD x 0.25 ID).$0.19/
foot
GRT250¼" clear reinforced (0.375 OD x 0.250 ID).
$0.49/foot
GRT-250-UV-BLUE
¼" blue, UV-protected, reinforced (0.375 OD x 0.250 ID).
$0.45/foot
GRT500 ½" clear reinforced (0.750 OD x 0.500 ID). $0.58
G125 ¼” semi-rigid poly tubing (0.160 ID). $0.55
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 1www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
:. F ir st Stage
Second Sta ge
1 - Zo ne 1 Acti ve2 - Zo ne 2 Acti ve3 - Zo ne 3 Acti ve+ - Act ive Temp Rea che d
:. F i rs t S t age
S ec on d S t ag e
1 - Z on e 1 A c t i v e2 - Z on e 2 A c t i v e3 - Z on e 3 A c t i v e+ - A c ti v e Tem p R e ac he d
:. First St age
Sec ond Stage
1 - Zone 1 Active2 - Zone 2 Active3 - Zone 3 Active+ - Active Temp Reached
60
10
30
50
60
10
30
50
40 100
50
70
90
-
Part No. Description Price Part No. Description Price
30" lengths. Use with drippers, sprayers, and foggers. Eliminates need for wires, weights, or brackets. Stiff tubing resists swaying—Stays in proper location over pens.
COOLING NOZZLESDRIP NOZZLE
G130TThree-piece take-apart dripper, blue/black disk, 1 GPH @ 15 PSI.
$0.55
G130T-100 G130T, 100 pack. $46.20
G130T-1000 G130T, 1000 pack. $395.00
G135TThree-piece take-apart dripper, white/orange disk, ½ GPH @ 15 PSI.
$0.55
G135T-100 G135T, 100 pack. $46.20
G135T-1000 G135T, 1000 pack. $434.50
G135PC ½ GPH drip nozzle, pressure compensating. $0.65
G135PC-100 G135PC, 100 pack. $54.45
G131TTwo-piece take-apartdripper, 1 GPH @ 15 PSI.
$0.44
CLOSE-OFF
G138 Close-off/regulate G120 ¼" tubing. $0.28
G138-100 G138, 100 pack. $24.75
G160 Close-off/regulate G110 ½" tubing. $0.33
G160-1000 G160, 1000 pack. $275.00
CAPS FOR 10-32 FITTING
G13911/32" nozzle cap x 10-32 FT. $0.77
G139-18 11/32" nozzle cap x 1/8" FPT. $1.05
G149 ¼” FPT x 10-32 FT. $0.77
G147 ½” FPT x 10-32 FT. $0.44
REDUCER BUSHINGG146 ½” MPT x 10-32 FT. $0.77
SPRAY NOZZLE (180O) 10-32t
G140 3’ radius, 12 GPH @ 15 PSI, black. $0.55
G140-100 G140, 100 pack. $49.50
G143 3’ radius, 17 GPH @ 15 PSI , green. $0.55
G143-100 G143, 100 pack. $49.50
G145 3’ radius, 6 GPH @ 15 PSI, brown. $0.55
G145-100 G145, 100 pack. $49.50SPRAY NOZZLE (90O) 10-32t
G141 3’ radius, 12 GPH @ 15 PSI, black. $0.55
G142 3’ radius, 17 GPH @ 15 PSI , green. $0.55
G144 3’ radius, 6 GPH @ 15 PSI, brown. $0.55
TAP/DRILL BITG148- 10-32T
Drills then taps holes, 10-32t. $22.00
TIP! Use the G148-10-32T tap for big savings by eliminating the glued PVC fittings.
G148-¼NPT Drills then taps holes, ¼" NPT. $82.50
G148-1/8NPTDrills then taps holes, 1/8" NPT. $69.30
ADJUSTABLE 8-STREAM NOZZLE
G440 12" max. diameter, 10-32 MT. $0.45
G440-100 G440, 100 pack. $43.20
G440B 12" max. diameter, ¼" barb. $0.45
ROTARY SPRAY NOZZLE (360O)G150- 10-32T
8' diameter, 9 GPH @ 15 PSI, 10-32t. $2.70
G150-100 G150-10-32T, 100 pack. $251.90
G150-1/2"MPT
8' diameter, 9 GPH @ 15 PSI, ½" MPT. $3.36
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 2www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price
G150-1/2"-100
G150-1/2"MPT, 100 pack. $324.50
G150B 8' diameter, 9 GPH @ 15 PSI, ¼" barb. $2.70
CLEANING NOZZLESROTARY CLEANING NOZZLE(360O)
G151-10-32T
31' diameter, 22.5 GPH@ 30 PSI, 10-32t. $2.81
G151-10-32T-100
G151-10-32T, 100 pack. $262.90
G151-1/2"MPT
31' diameter, 22.5 GPH@ 30 PSI, ½" MPT.
$3.25
G151-1/2"MPT-100
G151-1/2"MPT, 100 pack. $311.30
G151B31' diameter, 22.5 GPH@ 30 PSI, ¼" barb. $2.04
The G150 & G151 series nozzles are available in ½" MPT, 3/8" MPT, 10-32t, and ¼" barb. Please consult factory for different configurations.
BALL*CLEAN NOZZLE
GSC3412½" or ¾" pipe, ¼" MPT outlet, with shut off.
$2.45
G546-14 ¼" x ¼" brass coupling. $0.45
GBC14116-2 Ball*Clean flex nozzle, ¼" MPT x 1/16" nozzle. $6.50
Point the Ball*Clean nozzle at buildup and watch it disappear!! A timer should be used to turn the nozzle onfor 1 (one) minute and off for about 12 hours!!
LEAK PREVENTION DEVICE
G150-10Prevent leakage from G150. Open: 20-25 PSI; Closed: 14-18 PSI.
$2.55
G211 Barbed leak prevention device. $3.36
¼” barb x ¼” barb used in place of G210.
TEEG170 ½” barb(x3), 15 PSI. $0.50
G175 ¼” barb(x3), 15 PSI. $0.33
G180 ½” comp(x3), 60 PSI. $1.05
ELBOW
G185 ½” comp x ½” comp, 60 PSI. $0.99
G190 ½” barb x ½” barb, 15 PSI. $0.50
G195 ¼” barb x ¼” barb, 15 PSI. $0.30
CONNECTOR
G200 ½” barb x ½” barb, 15 PSI. $0.44
G210 ¼" barb x ¼" barb, 15 PSI. $0.28
G330 ½” comp x ½” comp, 60 PSI. $0.94
ADAPTERG215 ¼” barb x 10-32 MT. $0.39
G216 10-32 male x 10-32 MT. $0.39
G220 ½" comp x ¾" FGHT, 60 PSI. $0.94
Adapter with washer. No clamp required.
G230½" comp x ¾" MGHT, 60 PSI. No clamp required.
$0.94
G222 ¼" barb x ¾” FGHT, with G221 hose screen. $1.49
G260 5/8" loop clamp. $0.10
G265 Nail clamp. Holds ¼” tubing. $0.11
G270 #10 x ¾”. $0.11
HOLE PUNCHG283 Economy hole punch. $0.88
G280 Makes ¼” hole in polytube. $2.86
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 3www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
Orange
Green
-
Part No. Description Price Part No. Description Price
G285 For serious hole punching. $31.90
G285-1B Replacement Punch forG285 above. $13.20
G290 Hole plug. $0.06
G320 8” long nylon tie. $0.11
PRESSURE REGULATOR
G240-10 ¾" FGHT x ¾" MGHT, 10 PSI. $10.45
G240-15B ¾" FGHT x ¾" MGHT, 15 PSI. $10.45
G240-20B ¾" FGHT x ¾" MGHT, 19 PSI. $10.45
G240-K3Pressure regulator kit includes 10, 15, and 20 PSI regulators above.
$26.95
G255 0-30 PSI, 1/4” ports and 2 plugs $34.95
G2560-30 PSI, with Schrader Gauge Valve¾” FGHT x ¾” MGHT
$54.95
G257Reg.0-30 PSI, with 0-30 PSI gauge¾” MGHT x ¾” FGHT
$74.95
"Y" CONNECTOR
G340 ¾" MGHT x ¾" MGHT x ¾" FGHT. $1.98
HOSE END
G3495/8" x ¾" FGHT - ¾" hose. $2.50
G3515/8" x ¾" MGHT - ¾" hose. $2.50
GARDEN HOSE WASHERSG221 Hose screen. $0.28
G223 ¾" washer, garden, plain. $0.11
BALL VALVESG348 ½" comp x ½" comp. $2.75
G350 ½" MGHT x ¾" FGHT. $2.50
GBV12T ½" FPT x ½" FPT. $3.19GBV12S ½" slip x ½" slip. $3.19GBV34T ¾" FPT x ¾" FPT. $3.70GBV34S ¾" slip x ¾" slip. $3.70
GBV3434TH45B
¼ turn ball valve, ¾" MGHT x ¾" MPT. $7.75
SOLENOID VALVEG360 110V coil, ¾" FPT. $58.25
G360-2424V coil, ¾" FPT. (Maximum flow rate - 20 GPM.)
$46.75
G360-1-24V
24V coil, 1" FPT. (Maximum flow rate - 40 GPM.)
$117.65
G360-1.5-24V
24V coil, 1.5" FPT. (Maximum flow rate - 150 GPM.)
$167.15
FLUSH VALVE (Quick Dump)
G370-1H ¾" FGHT, 1 PSI, whiteplunger. $3.85
G370-2H ¾" FGHT, 2 PSI, blackplunger. $3.85
FULL FLOW VALVE
G217 ¼" valve, 10-32t x 10-32t. $1.21
G217B ¼" valve, ¼" barb x ¼"barb. $1.21
PVC FITTINGSFor all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100! 100!
PVC CROSS
G420-005 ½" slip x ½" slip x ½" slip x ½" slip. $0.78
G420-007 ¾" slip x ¾" slip x ¾" slip x ¾" slip. $1.33
G420-010 1" slip x 1" slip x 1" slip x 1" slip. $1.60
PVC TEE, SLIP X SLIP X SLIP
G401-005 ½" slip x ½" slip x ½" slip. $0.49
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 4www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price
G401-007 ¾" slip x ¾" slip x ¾" slip. $0.53
G401-010 1" slip x 1" slip x 1" slip. $0.49
G401-074 ½" slip x ½" slip x ¾" slip. $0.65
G401-094 ¾" slip x ½" slip x ½" slip. $0.60
G401-095 ¾" slip x ½" slip x ¾" slip. $0.60
G401-101 ¾" slip x ¾" slip x ½" slip. $0.71
G401-102 ¾" slip x ¾" slip x 1" slip. $1.20
G401-124 1" slip x ¾" slip x ½" slip. $1.20
G401-125 1" slip x ¾" slip x ¾" slip. $1.20
G401-126 1" slip x ¾" slip x 1" slip. $1.20
G401-130 1" slip x 1" slip x ½" slip. $0.70
G401-131 1" slip x 1" slip x ¾" slip. $0.75
For all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!
PVC TEE, SLIP X SLIP X FPT
G402-005 ½" slip x ½" slip x ½" FPT. $0.62
G402-007 ¾" slip x ¾" slip x ¾" FPT. $0.95
G402-010 1" slip x 1" slip x 1" FPT. $1.15
G402-071 ½" slip x ½" slip x 1/8"
FPT. $1.13
G402-072 ½" slip x ½" slip x ¼" FPT. $1.70
G402-074 ½" slip x ½" slip x ¾" FPT. $0.87
G402-094 ¾" slip x ½" slip x ½" FPT. $0.62
G402-095 ¾" slip x ½" slip x ¾" FPT. $0.62
G402-101 ¾" slip x ¾" slip x ½" FPT.$0.77
G402-124 1" slip x ¾" slip x ½" FPT. $1.15
G402-125 1" slip x ¾" slip x ¾" FPT. $1.15
G402-130 1" slip x 1" slip x ½" FPT. $1.07
G402-131 1" slip x 1" slip x ¾" FPT. $1.13
G402-071C ½" comp x ½" comp x 1/8" FPT, 60 PSI. $1.30
PVC TEE, SLIP X FPT X SLIP
G403-005 ½"slip x ½" FPT x ½"slip. $0.41
G403-007 ¾" slip x ¾" FPT x ¾"slip $0.63
G403-095 ¾"slip x ½" FPT x ¾"slip. $0.63
PVC SIDE OUTLET
G414-005 ½" slip x ½" slip x ½" FPT. $5.96
PVC ELBOW, SLIP x SLIPG406-005 ½" slip x ½" slip. $0.41G406-007 ¾" slip x ¾" slip. $0.49G406-010 1" slip x 1" slip. $0.77G406-101 ¾" slip x ½" slip. $0.50G406-130 1" slip x ½" slip. $0.73G406-131 1" slip x ¾" slip. $0.87
PVC ELBOW, SLIP x FPTG407-005 ½" slip x ½" FPT. $0.59G407-007 ¾" slip x ¾" FPT. $0.71G407-010 1" slip x 1" FPT. $0.75G407-074 ½" slip x ¾" FPT. $0.75G407-101 ¾" slip x ½" FPT. $0.37G407-130 1" slip x ½" FPT. $1.00G407-131 1" slip x ¾" FPT. $2.65
PVC COUPLING, SLIP x SLIPG429-005 ½" slip x ½" slip. $0.32G429-007 ¾" slip x ¾" slip. $0.40G429-010 1" slip x 1" slip. $0.62G429-101 ¾" slip x ½" slip. $0.40G429-131 1" slip x ¾" slip. $0.68PVC FEMALE ADAPTER, SLIP x FPT
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 5www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price
G435-005 ½" slip x ½" FPT. $0.49G435-007 ¾" slip x ¾" FPT. $0.62G435-010 1" slip x 1" FPT. $0.62G435-074 ½" slip x ¾" FPT. $0.54G435-101 ¾" slip x ½" FPT. $0.54G435-102 ¾" slip x 1" FPT. $0.65G435-130 1" slip x ½" FPT. $0.65G435-131 1" slip x ¾" FPT. $0.65
PVC UNIONG457-005 ½" slip x ½" slip. $2.38G457-007 ¾" slip x ¾" slip. $4.55G457-010 1" slip x 1" slip. $4.45
For all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!
PVC REDUCER BUSHING, SLIP x FPTG438-071 ½" slip x 1/8" FPT. $0.57G438-072 ½" slip x ¼" FPT. $0.57G438-073 ½" slip x 3/8" FPT. $0.57G438-098 ¾" slip x ¼" FPT. $0.59G438-101 ¾" slip x ½" FPT. $1.61G438-130 1" slip x ½" FPT. $0.65G438-131 1" slip x ¾" FPT. $0.65
PVC ADAPTER, SLIP x MPTG436-005 ½" slip x ½" MPT. $0.40G436-007 ¾" slip x ¾" MPT. $0.53G436-010 1" slip x 1" MPT. $0.71G436-101 ½" slip x ¾" MPT. $0.40G436-074 ¾" slip x ½" MPT. $0.45G436-131 ¾" slip x 1" MPT. $1.33G436-102 1" slip x ¾" MPT. $0.62
½" SLIP ADAPTER
GA2-620 ½" slip x 0.620" comp, green. $0.35
GA2-350 ½" slip x 0.350" comp, black. $0.35
GA2-250 ½" slip x 0.250" comp, red. $0.35
GA2-500 ½" slip x 0.500" comp, grey. $0.35
PVC CAPG447-005 ½" slip. $0.40G447-007 ¾" slip. $0.49G447-010 1" slip. $0.98
STRAINER BOWL ASSEMBLY
GS100Four piece clear strainer bowl assembly. ½" MPT x ½" MPT. 80 mesh screen.
$8.95
GS100-1 Clear bowl (see through). $4.45
GS100-1B Black bowl (not see through). $4.75
GS100-2 Screen, 80 mesh. $3.75GS100-3 Gasket. $0.75
FLUSHABLE FILTER
GFF3/4 ¾" MPT x ¾" MPT, back flush valve FGHT. $18.95
No need for costly replacement filter cartridges. Just by flicking the valve handle 90O every few days, water rushes across the filter, flushing the collected debris off the filter surface and renewing the filter.
REPLACEMENT FILTER ELEMENTSGFFRFE-50 50 mesh poly, blue. $13.95GFFRFE-75 75 mesh, white. $13.95GFFRFE-150
150 mesh, black, standard. $5.79
GFFRFE-150SS
150 mesh stainless steel. $6.49
WINTER SYSTEM PARTSCROSS
CRG1/2 ½" galvanized cross. $5.98CRG3/4 ¾" galvanized cross. $9.30CRP ½" plastic cross. $10.98Special plastic cross with valve ports angled down at 20O for good drainage to help prevent freezing.
YG1/2 ½" galvanized "Y". $7.89YG3/4 ¾" galvanized "Y". $9.49
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 6www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price
GROUND FAULT INTERRUPTER
GROUND FAULT INTERR
GFIO15A15 amp capacity, fits into standard electrical box.
$19.00
When there is water and electricity in the same area a Ground Fault Interrupter should be used. Because of the potential forshock, HEATSOCKS & HEATTAPES must be connected to a ground fault interrupter circuit!
ADAPTER KIT
GHB 3412K
¾" MPT x ½" polyethylene pipe compression.
$19.95
Allows heatsock to be used with ½" black poly pipe. Replaces PVC barbed fitting with brass (¾" MPT) compression.
HEATSOCKHS3 3 ft, 30 Watts. $62.95HS4 4 ft, 40 Watts. $71.95HS5 5 ft, 50 Watts. $81.95HS6 6 ft, 60 Watts. $90.95HS7 7 ft, 70 Watts. $100.95HS8 8 ft, 80 Watts. $109.95HS9 9 ft, 90 Watts. $119.95HS10 10 ft, 100 Watts. $128.95HS25 25 ft, 125 Watts. $270.95HS50 50 ft, 250 Watts. $506.95Please consult factory for other lengths.
Greenhill states that because of the ever present potential for shock when you have water and electricity in the same area, the above circuits must be connected to a ground fault interrupter circuit.
HEATTAPESHT10 10 ft, 100 Watts. $93.00HT25 25 ft, 250 Watts. $198.00HT50 50 ft, 500 Watts. $373.00
HT125 125 ft, 1250 Watts. $898.00
NYLON FITTINGS
For all nylon parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!
STREET ELBOWGSE1414 ¼" MPT x ¼" FPT. $3.10GSE1212 ½" MPT x ½" FPT. $2.60GSE3434 ¾" MPT x ¾" FPT. $3.20GSE100100 1" MPT x 1" FPT. $4.50SWIVEL, BARBED ADAPTER (Ball)
GNC1414 ¼" FPT x ¼" barb. $0.55GNC3814 3/8" FPT x ¼" barb. $0.70GNC3838 3/8" FPT x 3/8" barb. $0.65GNC1214 ½" FPT x ¼" barb. $0.75GNC1238 ½" FPT x 3/8" barb. $0.75GNC1212 ½" FPT x ½" barb. $0.75
SWIVEL, BARBED ADAPTER, FPT(Washer)
GNC 1214W
½" FPT x ¼" barb. $0.95
GNC1214W-SS
½" FPT x ¼" stainless steel barb. $1.65
GNC1214-WASHER
Replacement washer for GNC1214W. $0.45
SWIVEL, BARBED ADAPTER,GARDEN HOSE (Washer)
GB3414 ¾" FGHT x ¼" barb. $0.90GB3438 ¾" FGHT x 3/8" barb. $0.90GB3412 ¾" FGHT x ½" barb. $0.90GB3458 ¾" FGHT x 5/8" barb. $0.95GB3434 ¾" FGHT x ¾" barb. $0.95For more washers, see GARDEN HOSE WASHERS.
BARBED ADAPTER, MALETHREAD, NYLON
GA18316 1/8" MPT x 3/16" barb. $0.40(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 7www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
N E W !
-
Part No. Description Price Part No. Description Price
GA1814 1/8" MPT x ¼" barb. $0.40GA18516 1/8" MPT x 5/16" barb. $0.40GA1838 1/8" MPT x 3/8" barb. $0.40GA14316 ¼" MPT x 3/16" barb. $0.40GA1414 ¼" MPT x ¼" barb. $0.40GA14516 ¼" MPT x 5/16" barb. $0.40GA1438 ¼" MPT x 3/8" barb. $0.40GA1412 ¼" MPT x ½" barb. $0.45GA3814 3/8" MPT x ¼" barb. $0.45GA38516 3/8" MPT x 5/16" barb. $0.45GA3838 3/8" MPT x 3/8" barb. $0.45GA3812 3/8" MPT x ½" barb. $0.45GA3858 3/8" MPT x 5/8" barb. $0.45GA12316 ½" MPT x 3/16" barb. $0.45GA1214 ½" MPT x ¼" barb. $0.45GA1238 ½" MPT x 3/8" barb. $0.45GA1212 ½" MPT x ½" barb. $0.50GA1258 ½" MPT x 5/8" barb. $0.50GA1234 ½" MPT x ¾" barb. $0.55GA12100 ½" MPT x 1" barb. $0.55GA3414 ¾" MPT x ¼" barb. $0.55GA3438 ¾" MPT x 3/8" barb. $0.55GA3412 ¾" MPT x ½" barb. $0.55GA3458 ¾" MPT x 5/8" barb. $0.55GA3434 ¾" MPT x ¾" barb. $0.55GA34100 ¾" MPT x 1" barb. $0.70GA10034 1" MPT x ¾" barb. $0.70GA100100 1" MPT x 1" barb. $0.75GD3414 ¾" MGHT x ¼" barb. $0.65GD3438 ¾" MGHT x 3/8" barb. $0.65GD3412 ¾" MGHT x ½" barb. $0.65GD3458 ¾" MGHT x 5/8" barb. $0.70GD3434 ¾" MGHT x ¾" barb. $0.75GD34100 ¾" MGHT x 1" barb. $1.00
For all nylon parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!
BARBED ADAPTER, FEMALETHREAD, NYLON
GAF1414 ¼" FPT x ¼" barb. $1.40GAF1438 ¼" FPT x 3/8" barb. $1.40
GAF3814 3/8" FPT x ¼" barb. $1.50GAF3838 3/8" FPT x 3/8" barb. $1.50GAF3812 3/8" FPT x ½" barb. $1.50GAF1214 ½" FPT x ¼" barb. $1.50GAF1238 ½" FPT x 3/8" barb. $1.55GAF1212 ½" FPT x ½" barb. $1.05GAF1258 ½" FPT x 5/8" barb. $1.55GAF1234 ½" FPT x ¾" barb. $1.55GAF3438 ¾" FPT x 3/8" barb. $1.65GAF3412 ¾" FPT x ½" barb. $1.70GAF3458 ¾" FPT x 5/8" barb. $1.70GAF3434 ¾" FPT x ¾" barb. $1.75
BARBED ADAPTER, ELBOWGEL1814F 1/8" FPT x ¼" barb. $1.55GEL1838F 1/8" FPT x 3/8" barb. $1.55GEL14316F ¼" FPT x 3/16" barb. $1.55GEL1414F ¼" FPT x ¼" barb. $1.55GEL1438F ¼" FPT x 3/8" barb. $1.60GEL3814F 3/8" FPT x ¼" barb. $1.65GEL3838F 3/8" FPT x 3/8" barb. $1.65GEL3812F 3/8" FPT x ½" barb. $1.65GEL1258F ½" FPT x 5/8" barb. $1.75GEL1234F ½" FPT x ¾" barb. $1.75GEL3412F ¾" FPT x ½" barb. $1.30GEL3458F ¾" FPT x 5/8" barb. $1.30GEL3434F ¾" FPT x ¾" barb. $1.30GEL1414HB ¼" barb x ¼" barb. $0.55GEL3814HB 3/8" barb x ¼" barb. $0.90GEL3838HB 3/8" barb x 3/8" barb. $0.55GEL1214HB ½" barb x ¼" barb. $0.60GEL1238HB ½" barb x 3/8" barb. $0.60GEL1212HB ½" barb x ½" barb. $0.60GEL5858HB 5/8" barb x 5/8" barb. $0.60GEL3458HB ¾" barb x 5/8" barb. $0.95GEL3434HB ¾" barb x ¾" barb. $0.70GEL100100HB
1" barb x 1" barb. $1.15
HOSE MENDERS, NYLONGHM1818 1/8" barb x 1/8" barb. $0.35GHM14316 ¼" barb x 3/16" barb. $0.35GHM1414 ¼" barb x ¼" barb. $0.40GHM516516 5/16" barb x 5/16" barb. $0.40
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 8www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price
GHM3814 3/8" barb x ¼" barb. $0.45GHM1214 ½" barb x ¼" barb. $0.35GHM1238 ½" barb x 3/8" barb. $0.45GHM1212 ½" barb x ½" barb. $0.55GHM5838 5/8" barb x 3/8" barb. $0.35GHM5858 5/8" barb x 5/8" barb. $0.60
TEE, NYLON
GT18 1 2 3 1/8"
barb OD(x3). $0.85
GT14 ¼” barb OD(x3). $0.70GT38 3/8" barb OD(x3). $0.75GT12 ½" barb OD(x3). $0.80GT58 5/8" barb OD(x3). $0.80GT34 ¾" barb OD(x3). $1.00GT100 1" barb OD(x3). $1.40GT1438 ¼" x 3/8" x 3/8" OD. $0.80GT3812 3/8" x ½” x ½” OD. $0.75GT3858 3/8" x 5/8" x 5/8" OD. $0.75GT1238 ½" x 3/8" x 3/8" OD. $0.80GT3412 ¾" x ½" x ½" OD. $1.50
GTY14 "Y," ¼" x ¼" x ¼” barb
$0.90
GTY38 “Y,” 3/8”x3/8”x-3/8” barb $1.35
GTY12 "Y," 1/2”x 1/2”x1/2” barb $1.65
REDUCER BUSHING, NYLONGRB1810 1/8" MPT x 10-32t. $0.85GRB1418 ¼" MPT x 1/8" FPT. $0.85GRB3818 3/8" MPT x 1/8" FPT. $0.90GRB3814 3/8" MPT x ¼" FPT. $0.85GRB1218 ½" MPT x 1/8" FPT. $0.85GRB1214 ½" MPT x ¼" FPT. $0.95GRB1238 ½" MPT x 3/8" FPT. $0.90GRB3418 ¾" MPT x 1/8" FPT. $1.15GRB3414 ¾" MPT x ¼" FPT. $0.95GRB3438 ¾" MPT x 3/8" FPT. $1.00GRB3412 ¾" MPT x ½" FPT. $0.95GRB10012 1" MPT x ½" FPT. $1.40GRB10034 1" MPT x ¾" FPT. $1.65
For all nylon parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!
ADAPTER, GARDEN HOSE TO PIPEGE3438 ¾" MGHT x 3/8" MPT. $0.45GE3412 ¾" MGHT x ½" MPT. $0.45GE3434 ¾" MGHT x ¾" MPT. $0.50GG3414 ¾" MGHT x ¼" FPT. $1.45GG3412 ¾" MGHT x ½" FPT. $1.30GG3434 ¾" MGHT x ¾" FPT. $1.30GH3434 ¾" MPT x ¾" FGHT. $1.70GI3434 ¾" MGHT x ¾" FGHT. $1.30
COUPLING, NYLONGFC1212 ½" FPT x ½" FPT. $1.80GFC3434 ¾" FPT x ¾" FPT. $1.85GFC100100 1" FPT x 1" FPT. $2.25GRC3814 3/8" FPT x ¼" FPT. $1.80GRC3412 ¾" FPT x ½" FPT. $1.85GRC111618 11/16" thread x 1/8" FPT. $0.95GJ3412 ¾" FGHT x ½" FPT. $1.40
REDUCING NIPPLE, NYLONGRM1418 ¼" MPT x 1/8" MPT. $0.65GRM3818 3/8" MPT x 1/8" MPT. $0.75GRM3814 3/8" MPT x ¼" MPT. $0.80GRM1218 ½" MPT x 1/8" MPT. $0.75GRM1214 ½" MPT x ¼" MPT. $0.80GRM1238 ½" MPT x 3/8" MPT. $1.05GRM3438 ¾" MPT x 3/8" MPT. $1.40GRM3412 ¾" MPT x ½" MPT. $1.05
CLOSE NIPPLES, NYLONGM1818 1/8" MPT x 1/8" MPT. $0.45GM1414 ¼" MPT x ¼" MPT. $0.50GM3838 3/8" MPT x 3/8" MPT. $0.60GM1212 ½" MPT x ½" MPT. $0.60GM3434 ¾" MPT x ¾" MPT. $0.70GM100100 1" MPT x 1" MPT. $1.15
PIPE PLUG/CLOSE OFF BUSHINGGF18 1/8" MPT. $0.45GF14 ¼" MPT. $0.50GF38 3/8" MPT. $0.50GF12 ½" MPT. $0.55
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 9www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
3
1
2
-
Part No. Description Price Part No. Description Price
GF34 ¾" MPT. $0.55GF100 1" MPT. $0.70
FLOOD STOPPER
GFS34 ¾" MGHT x ¾" FGHT. $9.95
GFS34K Flood stopper kit. $13.951 GE3434, 1 GFS34 flood stopper, 1 GG3434, and 1 two foot hose assembly with ¾" FGHT x ¾" MPT.
FOG NOZZLE, 1/8" MPT
G554FL 0.44 GPH @ 60 PSI, with filter, white. $4.50
G560FL 1.0 GPH @ 60 PSI, with filter, grey. $2.10
G560FL-100 G560FL, 100 pack. $200.00
G565FL 1.5 GPH @ 60 PSI, with filter, cream. $2.10
G565FL-100 G565FL, 100 pack. $200.00
G567FL 1.9 GPH @ 60 PSI, with filter, blue. $2.10
G567FL-100 G567FL, 100 pack. $200.00
G559FL Foam filter, 80 micron, 0.875" long. $0.30
G559FL-100 G559FL, 100 pack. $19.00
GORING-01E
O-ring for GRC111618and Greenhill 1/8" fog nozzles above.
$0.15
GORING-01E-100
GORING-01E, 100 pack. $13.50
GRC111618Use GRC111618 coupling to adapt 1/8" MPT fog nozzle to 11/16" thread.
$0.95
GRC111618-100
GRC111618, 100 pack. $90.00
FOG NOZZLE LINE
GFA-412P
Complete fog nozzle line with swaged ferrules, standard ½" FPT swivel, and 4 nozzles.
$19.50
GFA-612P
Complete fog nozzle line with swaged ferrules, standard ½" FPT swivel, and 6 nozzles.
$31.50
GFA-812P
Complete fog nozzle line with swaged ferrules, standard ½" FPT swivel, and 8 nozzles.
$33.50
GFA-1012P
Complete fog nozzle line with swaged ferrules, standard ½" FPT swivel, and 10 nozzles.
$37.50
Please consult factory for other lengths.
NOTE: All fog nozzle lines come with 3 times as many G320 nylon ties as nozzles.
DROP-IN SYSTEM
GND-F2.0 Flat nozzle, .20 GPM @ 10 PSI, red. $1.25
GND-F2.5 Flat nozzle, .25 GPM @ 10 PSI, brown. $1.25
GND-F3.0 Flat nozzle, .30 GPM @ 10 PSI, gray. $1.25
GND-F4.0 Flat nozzle, .40 GPM @ 10 PSI, white. $1.25
GND-F5.0 Flat nozzle, .50 GPM @ 10 PSI, light blue. $1.25
GND-F7.5 Flat nozzle, .75 GPM @ 10 PSI, lime green. $1.25
GSCN-1.4GPH
Drop-in fog nozzle, 1.4GPH @ 100 PSI, white. $2.10
GSCN-1.8NGPH
Drop-in fog nozzle, 1.8GPH @ 100 PSI, cream.
$2.10
GSCN-2GPH
Drop-in fog nozzle, 2 GPH @ 100 PSI, green. $2.10
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 10www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
N E W !
N E W !
N E W !
-
Part No. Description Price Part No. Description Price
GAD 111614M
Adapter, 11/16" to ¼" MPT. $0.45
*G271 Screw, #14 x ¾" stainless steel. $0.45
GSC12-1 Saddle clamp, ½" pipe. $2.19
GSC34-1 Saddle clamp, ¾" pipe. $2.19
*GSC- O-RING Saddle clamp o-ring. $0.55
*GSC-Adapter
Adapter, 11/16" to saddle clamp. $1.79
*GSC-NUT Nut, attaches nozzle to 11/16" clamp. $0.30
GSC-CAP Cap. $0.50
GSC-WNUT
Optional, instead of GSC-NUT. $0.75
*GSC12-ASSM
Assembly: Comes with all * and GSC12-1. $4.75
*GSC34-ASSM
Assembly: Comes with all * and GSC34-1. $4.75
GSC-SCRN-50
Optional, screen 50 mesh. $1.05
GSC-SCRN-100
Optional, screen 100 mesh. $0.90
GSC-SCRN-50C
Optional, screen 50 mesh with check. $2.55
GSC-SCRN-100C
Optional, screen 100 mesh with check. $2.55
SADDLE CONNECTOR
GSC3412½" or ¾" pipe, ¼" MPT outlet, with shut off.
$2.45
GSC 3412W-1
Replacement washer for GSC3412.
$0.45
PINCH HOSE CLAMP
GHC63/8" diameter, steel, foruse with GPT250. $0.10
GHC8 ½" diameter, steel, for use with GRT250. $0.15
GHCN8 ½" diameter, nylon, foruse with GRT250. $0.30
GHCN12 ¾" diameter, nylon, foruse with GRT500. $0.70
DROP LINE
GDR-6 6' reinforced clear. $9.50+0.49foot
GDR-6-UV 6' reinforced blue, UV resistant.$5.25 +
0.35/foot
QUANTITY DISCOUNTS ON ALL PARTS FOR 100 AND 1000 PACKS. CALL FOR PRICING.
COMP = Compression connector MGHT = Male garden hose threadFGHT = Female garden hose thread MPT = Male pipe threadFPT = Female pipe thread MT = Male threadFT = Female thread OD = Outer diameterGPH = Gallons per hour SLIP = PVC glueID = Inner diameter
Terms are: Payment with order or C.O.D.; Orders shipped by U.P.S.; If a check is enclosed with order, Greenhill Manufacturing will pay the U.P.S. Charges.
WI residents add 5% sales tax or WI Tax Exempt Form S206.
SHIPPING ADDRESSName: ____________________________
Address: __________________________
City: _________ State: _____ Zip: _____
Phone: __________
ONE YEAR WARRANTY: Greenhill Manufacturing warrants its controller and system parts against defects in material or workmanship for one (1) year after the purchase date. If a defect is found during the warranty period, simply return it prepaid, and the controller will be repaired or replaced. For the second year of operation the unit will be
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 11www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
-
Part No. Description Price Part No. Description Price repaired at a flat fee of $45.00. The above coverage is void if damage is caused by freezing or chewing. Specifications subject to change.
(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 12www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420
1/2“ Polytube System
G220swiveladapter
G1601/2“ close-off
G1101/2“ polytube
Make hole inpolytube w/hole punch
G285(seriouspunch)
G280(betterpunch)
G283(goodpunch)
Push in:
G130TG135T
, 1 GPHor , 1/2 GPH @ 15 PSI drip nozzle
G151B, 22.5 GPH @ 30 PSI, 31’ Dia360 nozzleo
G150B, 9 GPH@ 15 PSI, 8’Dia 360 nozzleo
PVC System, Glued, 3/4“ Pipe
Screw in ,1/2“ MPT x 10-32Treducer bushing
GRB1210
Screw in , 12 GPH @ 15 PSI, 3’ Rad 180 nozzle
G140o
Glue PVC tee to 3/4“PVC pipe
G402-101
Note: Reducer bushing ornipple & cap convert system for use with 10-32T parts.
G402-1013/4“S x 3/4”Sx 1/2” FPT
Screw in:
G151-1/2“MPT,9 GPH @ 15PSI, 8’ Dia360 nozzleo
G150-1/2“MPT,9 GPH @ 15PSI, 8’ Dia 360nozzle
o
Screw in , 1/2“ MPT x 1/2” MPT nipple
GM12
Screw on , 1/2“ FPT x 10-32 FT cap
G147
PVC Econo System
Drill/tap hole in PVC pipe using
tap/drill bitG148-10-32T
G429-0073/4“ PVCcoupling
3/4“ PVC pipe
Push in:
G150-10-32T,8’ Dia, 9 GPH@ 15 PSI360 nozzleo
G140 G143G145
, , or ,3’ Rad, @ 15 PSI180 nozzleo
G440,adjustable8-streamnozzle, 12“max. dia
Screw in:
G130TG135T
, 1 GPH or , 1/2 GPH @ 15 PSI drip nozzle
(10-32 thread)
G151-10-32T,22.5 GPH @ 30 PSI, 31’ Dia360 nozzleo
top related