oslon signal 80 datasheet version 1.1 lv · pdf file2012-05-21 2 version 1.1 lv ck7p ordering...
Post on 07-Feb-2018
230 Views
Preview:
TRANSCRIPT
2012-05-21
OSLON Signal 80DatasheetVersion 1.1
LV CK7P
2012-05-21 1
Features: Besondere Merkmale: • Package: SMD ceramic package with silicon
resin with lens• Gehäusetyp: SMD Keramik Gehäuse mit
Silikonverguss und Linse• Technology: ThinGaN • Technologie: ThinGaN • Color: verde green (505 nm) • Farbe: verde grün (505 nm)• ESD-withstand voltage: 8 kV acc. to
JESD22-A114-F• ESD-Festigkeit: 8 kV nach JESD22-A114-F
• Viewing angle at 50 % IV: 80° • Abstrahlwinkel bei 50 % IV: 80°
Applications Anwendungen• Traffic Lights and Signaling • Ampel- und Signalanlagen• General Lighting indoor and outdoor • Allgemeinbeleuchtung innen und außen• Medical Lighting • Medizinische Beleuchtung• Marker Lights • Marker Lights
Version 1.1 LV CK7P
Ordering InformationBestellinformation
Type Luminous Flux 1) page 19 Ordering Code
Typ Lichtstrom 1) Seite 19 Bestellnummer
IF = 350 mA
ΦV [lm]
LV CK7P-JYKZ-25 52 ... 112 Q65111A2323
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LV CK7P-JYKZ-25 means that only one group JY, JZ, KX, KY, KZ will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. LV CK7P-JYKZ-25 means that the device will be shipped within the specified limits as stated on page 6 In order to ensure availability, single color chromaticity groups groups will not be orderable (see page 6 for explanation).
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LV CK7P-JYKZ-25 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen JY, JZ, KX, KY, KZ enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. LV CK7P-JYKZ-25 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist (siehe Seite 6 für nähere Informationen). LV CK7P-JYKZ-25 bedeutet, dass das Bauteil innerhalb der auf Seite 6 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.
2012-05-21 2
Version 1.1 LV CK7P
Maximum RatingsGrenzwerte
Parameter Symbol Values Unit
Bezeichnung Symbol Werte Einheit
Operating temperature rangeBetriebstemperatur
Top -40 ... 120 °C
Storage temperature rangeLagertemperatur
Tstg -40 ... 120 °C
Junction temperature for short time applications *Sperrschichttemperatur für Kurzzeitanwendung *
Tj 175 °C
Junction temperatureSperrschichttemperatur
Tj 120 °C
Forward currentDurchlassstrom(TS = 25 °C)
IF 30 ... 1000 mA
Surge currentStoßstrom(t <= 10 μs; D = 0.005; TS = 25 °C)
IFM 2000 mA
Reverse voltageSperrspannung(TS = 25 °C)
VR not designed for reverse operation V
Note: *The LED chip exhibits excellent performance but slight package discoloration occurs at highest temperatures. Exemplary median lifetime for Tj = 175°C is 100h.
Anm: *Auch bei höchsten Temperaturen zeigt der LED Chip sehr gute Leistungsmerkmale, aber es kann eine leichte Verfärbung des Gehäuses auftreten. Die mittlere Lebensdauer bei Tj = 175°C beträgt 100h.
2012-05-21 3
Version 1.1 LV CK7P
Characteristics (TS = 25 °C; IF = 350 mA)Kennwerte
Parameter Symbol Values Unit
Bezeichnung Symbol Werte Einheit
Wavelength at peak emissionWellenlänge d. emittierten Lichtes
(typ.) λpeak 503 nm
Dominant Wavelength 2) page 19
Dominantwellenlänge 2) Seite 19 (min.)(typ.)(max.)
λdom
λdom
λdom
498505512
nmnmnm
Spectral bandwidth at 50% Irel max
Spektrale Bandbreite b. 50% Irel max
(typ.) Δλ 30 nm
Viewing angle at 50 % IVAbstrahlwinkel bei 50 % IV
(typ.) 2ϕ 80 °
Forward voltage 3) page 19
Durchlassspannung 3) Seite 19 (min.)(typ.)(max.)
VF
VF
VF
2.703.303.70
VVV
Reverse currentSperrstrom
IR not designed for reverse operation
Real thermal resistance junction / solder point 4) page 19
Realer Wärmewiderstand Sperrschicht / Lötpad 4) Seite 19
(typ.)(max.)
Rth JS real
Rth JS real
79.4
K/WK/W
"Electrical" thermal resistance junction / solder point 4) page 19
"Elektrischer" Wärmewiderstand Sperrschicht / Lötpad 4) Seite 19
(with efficiency ηe = 20 %)
(typ.)(max.)
Rth JS el
Rth JS el
68
K/WK/W
2012-05-21 4
Version 1.1 LV CK7P
Brightness GroupsHelligkeits-Gruppierungsschema
Group Luminous Flux 1) page
19 Luminous Flux 1) page
19 Luminous Intensity 5)
page 19
Gruppe Lichtstrom 1) Seite 19 Lichtstrom 1) Seite 19 Lichtstärke 5) Seite 19
(min.) ΦV [lm] (max.) ΦV [lm] (typ.) IV [cd]
JY 52 61 18.6
JZ 61 71 21.7
KX 71 82 25.2
KY 82 97 29.4
KZ 97 112 34.4
Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered.
Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar.
Chromaticity coordinate groups 6) page 19
Farbortgruppen 6) Seite 19
OHA03829
520530
540
550
560
570
580590
600610
620630
00
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
510
500
490
450
Cx
Cy
Cy
Cx
E
0.36
480
460470
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
4
5
3
2
Green EN12368 EU STANDARD 2006Green ITE 2005 USA
2
3
4
5
2012-05-21 5
Version 1.1 LV CK7P
Color Chromaticity Groups 6) page 19
Farbortgruppen 6) Seite 19
Group Name on LabelGruppenbezeichnung auf EtikettExample: JY-2Beispiel: JY-2
GroupGruppe
Cx Cy GroupGruppe
Cx Cy
2 0.0474 0.4618 4 0.0570 0.6080
0.0541 0.4070 0.1250 0.5134
0.0789 0.4000 0.1300 0.5476
0.1150 0.4000 5 0.0570 0.6080
0.1180 0.4537 0.0700 0.6756
3 0.0474 0.4618 0.1300 0.5476
0.0480 0.5134 0.1500 0.6175
0.1180 0.4537
0.1250 0.5134
4 0.0480 0.5134
BrightnessHelligkeit
WavelengthWellenlänge
JY 2
Note: No packing unit / tape ever contains more than one group for each selection.
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2012-05-21 6
Version 1.1 LV CK7P
Relative Spectral Emission - V(λ) = Standard eye response curve 5) page 19 , 1) page 19
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 5) Seite 19 , 1) Seite 19
Φrel = f (λ); TS = 25 °C; IF = 350 mA
Radiation Characteristics 5) page 19
Abstrahlcharakteristik 5) Seite 19
Irel = f (ϕ); TS = 25 °C
LV CK7P
350 400 450 500 550 600 650 700 750 800λ [nm]
0.0
0.2
0.4
0.6
0.8
1.0 Irel: yellowish green: Vλ
LV CK7P
-100°
-90°
-80°
-70°
-60°
-50°
-40°
-30°
-20°-10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
ϕ [°]
0.0
0.2
0.4
0.6
0.8
1.0 Irel
2012-05-21 7
Version 1.1 LV CK7P
Forward Current 5) page 19
Durchlassstrom 5) Seite 19
IF = f (VF); TS = 25 °C
Relative Luminous Flux 5) page 19 , 7) page 20
Relativer Lichtstrom 5) Seite 19 , 7) Seite 20
ΦV/ΦV(350 mA) = f(IF); TS = 25 °C
Chromaticity Coordinate Shift 5) page 19
Farbortverschiebung 5) Seite 19
Cx, Cy = f(IF); TS = 25 °C
LV CK7P
2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8UF [V]
200
400
600
800
1000IF [mA]LV CK7P
200
400
600
800
1000
IF [mA]
0.0
0.5
1.0
1.5
2.0
ΦV ΦV(350 mA )
LV CK7P
200
400
600
800
1000
IF [mA]
0.1
0.2
0.3
0.4
0.5
0.6
CxCy : Cx
: Cy
2012-05-21 8
Version 1.1 LV CK7P
Relative Forward Voltage 5) page 19
Relative Vorwärtsspannung 5) Seite 19
ΔVF = VF - VF(25°C) = f(Tj); IF = 350 mA
Relative Luminous Flux 5) page 19
Relative Lichtstrom 5) Seite 19
ΦV/ΦV(25 °C) = f(Tj); IF = 350 mA
Chromaticity Coordinate Shift 5) page 19
Farbortverschiebung 5) Seite 19
Cx, Cy = f(Tj); IF = 350 mA
LV CK7P
-40 -20 0 20 40 60 80 100 120Tj [°C]
-0.4
-0.2
0.0
0.2
0.4
ΔUF [V]LV CK7P
-40 -20 0 20 40 60 80 100 120Tj [°C]
0.0
0.2
0.4
0.6
0.8
1.0
1.2Φv Φv(25 °C)
LV CK7P
-40 -20 0 20 40 60 80 100 120Tj [°C]
0.1
0.2
0.3
0.4
0.5
0.6CxCy : Cx
: Cy
2012-05-21 9
Version 1.1 LV CK7P
Max. Permissible Forward Current 8) page 20
Maximal zulässiger Durchlassstrom 8) Seite 20
IF = f (T)
Permissible Pulse Handling CapabilityZulässige Impulsbelastbarkeit IF = f(tp)D: Duty cycle, TS = 25 °C
Permissible Pulse Handling CapabilityZulässige Impulsbelastbarkeit IF = f(tp)D: Duty cycle, TS = 85 °C
LV CK7P
0 20 40 60 80 100 120TS [°C]
0
100
200
300
400
500
600
700
800
900
1000
1100IF [mA]
Do not use below 30 mA
: TS
0.8-5
FIA
tp
s
OHL04184
-410 -310 -210 -110 010 110 21010
Pt=D TT
tP
IF
0.01
0.330.5
0.20.1
0.02
D0.005
=
0.05
1
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.1
0.8-5
FIA
tp
s
OHL04183
-410 -310 -210 -110 010 110 21010
Pt=D TT
tP
IF
0.01
0.330.5
0.20.1
0.02
D0.005
=
0.05
1
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.1
2012-05-21 10
Version 1.1 LV CK7P
Package Outline 9) page 20
Maßzeichnung 9) Seite 20
Approximate Weight: 20 mg
Gewicht: 20 mg
Mark: Cathode
Markierung: Kathode
ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip.
ESD Information: Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschalten ist.
2012-05-21 11
Version 1.1 LV CK7P
Recommended Solder Pad 9) page 20 Reflow solderingEmpfohlenes Lötpaddesign 9) Seite 20 Reflow-Löten
Notes: Package not suitable for ultra sonic cleaning.
Anmerkungen: Das Gehäuse ist für Ultraschallreinigung nicht geeignet.
2012-05-21 12
Version 1.1 LV CK7P
Reflow Soldering ProfileReflow LötprofilPreconditioning JEDEC Level 1 acc. to J-STD-020D.01
00
s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300t
T
˚C
St
t
Pt
Tp240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
OHA04612
Profil-CharakteristikProfile Feature
Ramp-up Rate to Preheat*)
25 °C to 150 °C2 3 K/s
Time tS TSmin to TSmax
tS
tL
tP
TL
TP
100 12060
10 20 30
80 100
217
2 3
245 260
3 6
Time25 °C to TP
Time within 5 °C of the specified peaktemperature TP - 5 K
Ramp-down Rate*TP to 100 °C
All temperatures refer to the center of the package, measured on the top of the component* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Ramp-up Rate to Peak*)
TSmax to TP
Liquidus Temperature
Peak Temperature
Time above Liquidus temperature
SymbolSymbol
EinheitUnit
Pb-Free (SnAgCu) Assembly
Minimum MaximumRecommendation
K/s
K/s
s
s
s
s
°C
°C
480
2012-05-21 13
Version 1.1 LV CK7P
Method of Taping 9) page 20
Gurtung 9) Seite 20
2012-05-21 14
Version 1.1 LV CK7P
Tape and ReelGurtverpackung12 mm tape with 600 pcs. on ∅ 180 mm reel
Tape dimensions in mm (inch)Tape dimensions in mm (inch)
Reel dimensions in mm (inch) Reel dimensions in mm (inch)
W P0 P1 P2 D0 E F
12 +0.3/-0.1 4 ± 0.1(0.157 ± 0.004)
4 ± 0.1(0.157 ± 0.004)or8 ± 0.1(0.315 ± 0.004)
2 ± 0.05(0.079 ± 0.002)
1.5 ± 0.1(0.059 + 0.004)
1.75 ± 0.1(0.069 ± 0.004)
5.5 ± 0.05(0.217 ± 0.002)
A W Nmin W1 W2max
180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079)
18.4 (0.724)
D0
2P
P0
1P
WFE
Direction of unreeling
N
W1
2W
A
OHAY0324
Label
Gurtvorlauf:Leader:
Trailer:Gurtende:
13.0
Direction of unreeling
±0.2
5
160 mm160 mm
400 mm400 mm
2012-05-21 15
Version 1.1 LV CK7P
Barcode-Product-Label (BPL)Barcode-Produkt-Etikett (BPL)
Dry Packing Process and MaterialsTrockenverpackung und Materialien
Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
ML2
Temp ST260 °C R
Pack: R18
DEMY 022
B_R999_1880.1642 R
9999(Q)QTY:
SemiconductorsOSRAM Opto
XX-XX-X-X
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately afterbag opening.
Discard if circles overrun.Avoid metal contact.
WET
Do not eat.
Comparatorcheck dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%bake units
bake units
If wet,
change desiccant
If wet,
Humidity IndicatorMIL-I-8835
If wet,
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
2012-05-21 16
Version 1.1 LV CK7P
Transportation Packing and MaterialsKartonverpackung und Materialien
Dimensions of transportation box in mm (inch)
Width / Breite Length / Länge Height / Höhe
195 ±5 (7,677 ±0,1968) 195 ±5 (7,677 ±0,1968) 30 ±5 (1,181 ±0,196)
Notes Hinweise
The evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Moderate risk (exposure time 0,25 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Moderate risk (Expositionsdauer 0,25s). Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen.
OHA02044
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
OSRAM
Packing
Sealing label
Barcode label
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Barcode label
2012-05-21 17
Version 1.1 LV CK7P
Disclaimer Disclaimer
Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Components used in life-support devices or systems must be expressly authorized for such purpose!Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.**) Life support devices or systems are intended(a) to be implanted in the human body,or(b) to support and/or maintain and sustain human life.If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Bitte beachten!Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb.Falls Sie diese Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet.VerpackungBenutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung.Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, müssen für diese Zwecke ausdrücklich zugelassen sein!Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt.
*) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt.**) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.
2012-05-21 18
Version 1.1 LV CK7P
Glossary Glossar1) Brightness: Brightness values are measured
during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3).
1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
2) Wavelength: The wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of ± 0,5 nm and an expanded uncertainty of ± 1 nm (acc. to GUM with a coverage factor of k=3).
2) Wellenlänge: Die Wellenläge wird während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,5 nm und einer erweiterten Messunsicherheit von ± 1 nm gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
3) Forward Voltage: The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3).
3) Durchlassspannung: Vorwärtsspannungen werden während eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
4) Thermal Resistance: Rth max based on statistic values (6ó)
4) Wärmewiderstand: Rth max basiert auf statistischen Werten (6ó)
5) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
5) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
6) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to GUM with a coverage factor of k = 3).
6) Farbortgruppen: Farbkoordinaten werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,005 und einer erweiterten Messunsicherheit von +/- 0,01 gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
2012-05-21 19
Version 1.1 LV CK7P
7) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit.
7) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden.
8) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size 16mm2 per pad)
8) Wärmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgröße 16mm2 je pad)
9) Tolerance of Measure: Dimensions are specified as follows: mm (inch).
9) Maßtoleranz: Maße werden wie folgt angegeben: mm (inch).
Glossary Glossar
2012-05-21 20
Version 1.1 LV CK7P
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.2012-05-21 21
top related