orb satellite model rbs50 quick start guide · 2016-12-26 · quick start guide if you already set...
Post on 09-Jul-2020
1 Views
Preview:
TRANSCRIPT
1. Connect Your Orbi Router
If you already connected your Orbi router, skip this step.
2. Place Your Orbi Satellite
If this is the first Orbi satellite you are adding to your Orbi network, follow these steps:
a. Place your Orbi satellite in the middle of your house to get the best WiFi coverage.
b. Connect the Orbi satellite to a power source.
The Power LED on the back of the Orbi satellite lights green. If the Power LED does not light, press the Power On/Off button.
Modem
2. Place Your Orbi Satellite (Continued)
Quick Start Guide
If you already set up an Orbi router and satellite on your Orbi network, follow these steps:
a. Place your Orbi satellite in a corner of your house that is far away from your existing Orbi router and satellite, but still within range or your Orbi router and satellite.
If your house has multiple floors, place your Orbi satellite on a different floor than your existing Orbi router and satellite.
b. Connect the Orbi satellite to a power source.
The Power LED on the back of the Orbi satellite lights green. If the Power LED does not light, press the Power On/Off button.
Orbi router
Orbi satellite
INTERNET INTERNETOrbi router
Orbi satellite
Orbi satellite
3. Sync Your Orbi Satellite
a. Wait about two minutes for the Orbi satellite’s ring LED to light solid white.
b. Press the Sync button on the back of your Orbi satellite, and within two minutes, press the Sync button on the back of your Orbi router.
The Orbi satellite’s ring LED lights white, then lights one of the following colors for about three minutes and then turns off:
Blue
The Orbi router and satellite successfully synced, and the connection between the router and satellite is good.
Amber
The Orbi router and satellite successfully synced, and the connection between the router and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.
Magenta
The Orbi router and satellite failed to sync. Move the satellite closer to the router and try again.
Ring LED (not shown in image)
Sync button (also used for WPS connection)
Ethernet ports
USB port
Power On/Off button and Power LED
DC Power connector
Reset button
SupportThank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.NETGEAR INTL LTD
Building 3, University Technology Centre Curraheen Road, Cork, Ireland
NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
December 2016
All Set Up!
Orbi satellite(Model RBS50)
Power adapter (varies by region)
Orbi Satellite OverviewPackage Contents
2
1
3
4
2
1
64
7
5
6
7
3
5
Download the NETGEAR Orbi AppUse the NETGEAR Orbi app to set up and manage your network. To find the app, scan one of the following QR codes or search for NETGEAR Orbi in the Apple App Store or Google Play Store.
top related