opg regulated facilities payment amounts regulated facilities payment amounts tom mitchell chief...
Post on 08-Mar-2018
223 Views
Preview:
TRANSCRIPT
OPG Regulated Facilities Payment Amounts
Tom MitchellChief Nuclear Officer
Nuclear
Stakeholder Meeting #1November 2, 2007
Nuclear Business Overview
2 Regulated Facilities Payment Amounts
1. Nuclear facilities
2. Business Overview
I. Performance
II. Programs
III. Risks
3. Nuclear Refurbishment & New Build
Presentation Outline
3 Regulated Facilities Payment Amounts
Nuclear Generating Stations – Base loadPickering A & B
Pickering A2 X 542 MW gross
Date in-service: 1971 to 1973
Units 1 & 4 in-service
Units 2 & 3: shut down & being placed into safe storage
Pickering B4 X 540 MW gross
Date in-service: 1983 to 1986
4 units in-service
Darlington 4 X 935 MW gross
Date in-service: 1989 to 1992
4 units in-service
Bruce A & B Owned by OPG but leased to Bruce Power
Six Units in operation, two being refurbished
OPG operates nuclear waste site
On a steady state basis the output from OPG’s 10 units at PA, PB and DN is expected to produce in the range of 50-51 TWh / year.
4 Regulated Facilities Payment Amounts
Technology While there are major design and operating differences CANDU vs typical US (PWR & BWR) reactors – there are also differences in Pickering A (PA), Pickering B (PB) and Darlington (DN) reactors reflecting different generations of design –mostly in improved containment design, computers & safety systems.
Components Pickering A
Pickering B
Darling -ton
PWR (900MW)
BWR(500MW)
ReactorHorizontal
pressure tubes
Horizontal pressure
tubes
Horizontal pressure
tubesPressure
vesselPressure
vessel
Reactor coolant and associated systems Heavy water Heavy water Heavy water Light water Light water
Generator Output 540MW 540MW 900MW 900MW 500MW
Steam Generators (SG)/unit 12 12 4 3 NA
Main Coolant Pumps/unit 16 16 4 3 2
Large Isolation valves Main Circuit 40/unit 40/unit 0 0 4/unit
Standby Generators & EPG’s 6 fo r 4 units 8 for 4 units 6 for 4 units 2/unit 2/unit
Computers/unit 2 2 8 0 0
Shut Down Systems/unit 2 2 2 1 1
On line Fuelling Machines 8 for 4 units 8 for 4 units 6 for 4 units NA NA
H -3 Removal Facility 0 0 1 NA NA
Heat Transport System Carbon steel Carbon steel Carbon steel Stainless Stainless
5 Regulated Facilities Payment Amounts
CANDU Technology
Heavy Water ModeratorHeavy Water Moderator Heavy Water HeatTransport System
SteamSteam WaterWater
CANDU Pressurized Heavy Water ReactorCANDU Pressurized Heavy Water ReactorCANDU Pressurized Heavy Water Reactor
Pressure ReliefDuct and Valves
Vacuum Building
Dousing Sprays
Dousing Tank
Pressure ReliefDuct and Valves
Vacuum Building
Dousing Sprays
Dousing Tank
CoolingWater
Condenser
CondensateExtractionPump
FeedPump
Powerhouse Switchyard
GENERATOR
TURBINE
CoolingWater
Condenser
CondensateExtractionPump
FeedPump
Powerhouse Switchyard
GENERATOR
TURBINE
Calandria
Reactor
Reactor Building
STEAMGENERATORS
FUELLINGMACHINES
PUMPS
COOLING
Calandria
Reactor
Reactor Building
STEAMGENERATORS
FUELLINGMACHINES
PUMPS
COOLING
6 Regulated Facilities Payment Amounts
Organization [1]CHIEF NUCLEAR OFFICER
STATION OPERATIONS
Pickering A
Pickering B
Darlington
NUCLEAR SUPPORT
Nuclear Supply Chain
Nuclear Programs and Training- Radiation Protection- Training - Facilities and Administration- Security
Engineering and Modifications- Safety Analysis- Specialized Engineering - Projects
- Nuclear Safety- Operations and Maintenance- Planning and Control- System and Equipment Engineering- Environment- Nuclear Regulatory Affairs
(Canadian Nuclear Safety Commission)- Business Support
Performance Improvement and Oversight
[1] NUCLEAR GENERATION DEVELOPMENT AND SERVICES (NGD&S) PROVIDES SUPPORT (INSPECTION AND MAINTENANCE SERVICES) TO STATION OPERATIONS. ALL NGD&S COSTS INCLUDED IN NUCLEAR BASE OM&A
7 Regulated Facilities Payment Amounts
Federal
Canadian Nuclear Safety Commission (CNSC) – all nuclear construction requirements, equipment, safety systems, security, operating limits, licences, security, emergency response, decommissioning and waste management are subject to CNSC approval. The requirement to meet nuclear safety regulations and standards is imposed by the Federal Nuclear Safety and Control Act (NSCA).
Environmental legislation includes the Canadian Environmental Protection Act, the Fisheries Act and the Canadian Environmental Assessment Act.
Provincial/Municipal
OPG is subject to provincial and municipal legislation including the Ontario Energy Board Act, the Electricity Act, the Environmental Protection Act, and the Ontario Water Resources Act, etc.
Regulatory Framework
8 Regulated Facilities Payment Amounts
Key Characteristics impacting Operations
SAFETY in terms of Nuclear and worker safety is the highest priority – hence the processes to operate, maintain our plants are highly prescriptive. Our plants are major industrial facilities with large sources of mechanical and electrical energy, process steam and chemicals. In addition, we have radioactive materials and radiation sources. All of these require stringent measures in the form of administrative controls and protective equipment for our workers. Safety practices are subject to frequent audits and industry reviews. Facility Security is also a major component of the business.
COMPLEXITY plants are technologically sophisticated facilities, with a large number of Nuclear safety and process systems, and a high level of redundancy for critical components within the plant.
MATERIALS used in the plant are subject to very high quality and stringent standards and pedigree, especially those used to handle high pressure radioactive materials.
TRAINING - OPG hire staff with special skills and provide extensive, ongoing training. There are extensive requirements which are CNSC mandated for nuclear operators and certain maintainers.
9 Regulated Facilities Payment Amounts
Nuclear Objectives
Continued focus on high Safety performance
Continued improvements in Human Performance by addressing leadership and demographics/knowledge transfer issues.
Improving Plant performance from Reliability improvement through material condition enhancements and outage efficiencies.
Value for Money - getting the right work and parts to the line to improve efficiency (supply chain improvements) and reducing infrastructure costs
10 Regulated Facilities Payment Amounts
2007 Performance and Near Term Plan
Darlington:DN’s recent operational performance has been outstanding . DN ranks high among CANDU reactors and other nuclear reactors world-wide, e.g. high Nuclear Performance Index (a standard industry measure of good, sustainable performance) and in recent WANO (World Association of Nuclear Operators) assessment.
Recent achievements include completion of major component work (e.g. steam generators, feeders and turbines) and industry leading implementation of three-year outage cycle mode.
Major work ahead is execute vacuum building outage in 2009.
Pickering A:PA return to service successfully addressed several regulatory and safety concerns with very large scale modifications.
Performance in 2007 impacted by emerging issues and reliability remains a concern.
11 Regulated Facilities Payment Amounts
2007 Performance and Near Term PlanPickering A (Cont’d):
Major work ahead:– Complete the Safe Storage Project on Units 2/3.
– Assess and resolve reliability issues and execute major component programs (feeder, turbines).
– Plan the vacuum building outage in 2010.
Pickering B:PB has completed major fuel channel inspection campaigns, safetymodifications (fire and environmental qualification), and reliability improvements.
Major work ahead to achieve and sustain target capacity factors in the mid 80s and Forced Loss Rate in the 5 % range:
– Working to reduce maintenance backlogs to industry standards.
– Outage improvement plan including moving to standard shorter outage
– Plan for vacuum building outage in 2010.
12 Regulated Facilities Payment Amounts
Major CANDU Technology Fleet issues being managed
Reactor
-
Steam Generator TubeAging Issues
Pump
Feeder Aging Issues
Pressure Tube Aging Issues
Wider Nuclear industry issue
Issues unique to CANDU
Life Cycle Plans in place and operational (major inspection and maintenance programs) to manage the known risks around these issues
13 Regulated Facilities Payment Amounts
Managing Business Risks
Technology risks
“Discovery type” risks – that could result in high cost of remediation and /or threat to generation output. Specific current technology ‘discovery’ areas could be realized in Feeder problems, turbine blade degradation, PA Calandria vault, Pickering Vacuum Building material degradation.
Changing Regulatory Requirements
There is an ongoing risk around changing regulatory requirements, especially in the Security area – susceptibility to world events.
Human resource development and planning
Demographic profile and shrinking replacement pool challenge ability to sustain performance. In the next 5 years, a significant part of the highly skilled trades and technical staff have the option to retire.
14 Regulated Facilities Payment Amounts
Refurbishment and New Development
Government direction June 2006:
Begin feasibility studies on refurbishing existing plants and begin an Environmental Assessment on refurbishing Pickering B
Begin investigating new nuclear development at an existing site
Estimated end of production life:
Pickering B: 2014 – 2016
Darlington: 2018 – 2020
Current work:
Pickering B refurbishment – Currently conducting assessment and developing viability recommendation for decision for OPG Board of Directors in 2008
Darlington refurbishment – Phase 1 work planned to begin in early 2008
Darlington new development – conducting pre-development work including work on an environmental assessment and other regulatory approvals and a technology assessment
top related