oil & gas hmi - rstahl.com · readability even in bright ambient light conditions, e.g. on oil...
Post on 27-Mar-2019
213 Views
Preview:
TRANSCRIPT
2 www.stahl-hmi.de
R. STAHL HMI for Oil & Gas ApplicationsApplications•MobileRigFloorPCs
•FixedMountedRigFloorPCs
• HMIforDrillersCabin
• HMIforWirelineSolutions
•WidescreensforContainerApplications
• HMIforTankfarmApplications
Certificates• ATEXZone1• IECExZone1,Class1• CSA,Gost-R,KGS,Inmetroaswell asDNV/LRcertificatesforships (FPSO,Tankersetc.)according toproducttype
3WWW.EXICOM.DE
R. STAHL HMI InnOvATIOnS
Sunlight Readable-DisplaysOur innovative sunlight readable (SR) displays ensure best readability even in bright ambient light conditions, e.g. on oil rigs. Compared to other standard sunlight-viewable displays, this display type with its innovative pole filter system blocks out any distracting reflections and glare, thus ensuring best image quality
Widescreens / Monitor Walls for "purged" containerIn order to provide a comprehensive visualization of all relevant processes in purged containers, widescreens or monitor walls are frequently used. In an emergency, when the “purged condition” fails, the monitor wall / widescreen can no longer be operated and small, explosion-protected emergency displays are used that visualize a lot less. This is now no longer necessary – our explosion-protected widescreens and office-like keyboard and mouse modules ensure optimum visualization even in emergencies, thus also ensuring that the quality of process visualization is not compromised at any time.
Plug-and-play Full Clients with pre-installed operating systemsAll our Full Clients / Panel PCs can be fully pre-configured ex-factory with a closed multilingual operating system (Windows XP / Windows Embedded / 7 Ultimate, etc.). The systems are designed as OPEN HMI, i.e. they are open for all types of soft-ware applications.
Thin Clients with REMOTE HMI FIRMWAREAll our Thin Client HMIs are fitted with a special firmware that protects the HMI system against outside manipulation and monitors the entire data communication, diagnosing any error messages immediately. The firmware also simplifies IP addressing as well as the entire configuration management.
direct sunlight
4 www.stahl-hmi.de
Why R. STAHL HMI ? R. STAHL HMI has the widest range of displays (10” to 24” WU) and various technologies – Full Client, Thin Client and KVM for the best solution for each individual application. All HMIs are of a modular design and function reliably for years of permanent operation, even at extreme temperatures ranging from -40°C to +50°C. In addition to our professional HMI hardware, our systems are configured with either REMOTE HMI FIRMWARE or READY-TO-RUN Operating Systems, ensuring a high degree of safety from outside manipulation.
Highlights Hardware• PermanentdisplayreadabilitythankstoinnovativeSunlight ReadableTechnologywithpolefiltersystem• Largedisplayrangefrom10“to24“FullHD/24“WU• Speciallyprotectedtouchscreensthatcanalso beoperatedwithglovedfingers• AsFullClient/ThinClientorKVMTechnology• Maintenance-freedesignandeasilyaccessibleconnectors• Easilyrepairableduetomodulardesign• Lightweightdesign>23.6kg• Widetemperaturerangefrom-40°Cupto+50°C• WLAN/RFIDsolutions• Comfortablewallmonitoringwithexplosion-protected widescreen,keyboard,mouseascontainersolution• Customizedenclosures/frontplates• VariousinternationalcertificatesandDNV/ LRcertificatesfortankships/FPSOetc.• Customizedhardwaredevelopmentpossible (CANBus,Joysticketc.)
5WWW.EXICOM.DE
Highlights Software• FullClients(PanelPCs)withWindows7Ultimate orEmbeddedStandard2009etc. - Full configured Ready-to-Run operating system - Open for software applications - Multilingual system with 26 languages - Full touch screen support with mouse and keyboard emulation in runtime and at login - Write-protected boot partition with Embedded Standard 2009 - System setup wizard for fast system setup • ThinClientswithR.STAHLRemoteFirmwarefor maximumsecurityandpermanentdatacontrol - High protection against manipulation by closed system - Defined access via OSD menu or system console - Filtering of all TCP und UDP ports of incoming connections - Redundant Network Fallback connection - Password protection of all OSD entries - Integrated Network diagnostic - Watchdog for data communication - Configuration Management (Import / Export) - Full touch screen support with mouse and keyboard emulation in 24 languages• Backup/Recoverystick• SoftwareSupportCenter
www.stahl-hmi.de6
Mobile Rigfloor HMI ATEXZone1/IECExZone1,Class1
For permanent monitoring of all drilling operations, the EXICOM Rig Floor PC is fitted with an innovative SR display and intelligent pole filter technology that blocks out distracting reflections and glare, thus ensuring optimum readability even in direct sunlight. The operator has everything under control, and is able to quickly respond to any critical event that might occur during drilling operations. Together with this innovative display type the HMI weighs less than 23.6 kg and is available as Full Client or Thin Client.
• Permanentdisplayreadabilitythankstoinnovative SunlightReadabletechnologywithpolefiltersystem• Lightweightdesign>23.6kg• Customizedenclosures/frontplates• Fastassemblyduetosimpleplug-inconnections•Widetemperaturerangefrom-40°Cupto+50°C• FullClients(PanelPCs)withWindows7Ultimateor EmbeddedStandard2009etc• ThinClientswithspecialRemoteHMIfirmware forextrasecurity• OptionalWLAN,USBRecoveryStick
WWW.EXICOM.DE 7
R. STAHL HMI InnOvATIOnS
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
new sunlight readable display technology Our innovative sunlight readable (SR) displays ensure best readability even in bright ambient light conditions, e.g. on oil rigs. Compared to other standard sunlight-viewable displays, this display type with its innovative pole filter system blocks out any distracting reflections and glare, thus ensuring best image quality.
polarizationfilter package
direct sunlight
display light
displayglass panel
www.stahl-hmi.de8
Fixed Mounted Rigfloor HMI ATEXZone1/IECExZone1,Class1
For all fixed mounted Rig Floor PCs, we have developed an enclosure type that allows the operator to adjust the monitor to the optimal position, both horizontally and vertically. The enclosure is fitted with the innovative SR display with intelligent pole filter technology that blocks out distracting reflections and glare, thus ensuring best readability even in direct sunlight – in other words: This is today's state-of-the art technology. The ope-rator has everything under control and is able to quickly respond to any critical event that might occur during drilling operations.
• Lightweight,compactenclosuresthat areeasilyinstalled• Optimumreadabilityduetoverticaland horizontalrotation.• Innovative15"SunlightReadabledisplay forglare-freemonitoring• 19"ashighbrightnessdisplayswithsuncanopy/ customizedenclosures• FullClients(PanelPCs)withWindows7Ultimate orEmbeddedStandard2009etc• ThinClientswithR.STAHLRemoteFirmwarefor maximumsecurityandpermanentdatacontrol• Fail-safeduetoUSBback-up/recoverystick
WWW.EXICOM.DE 9
R. STAHL HMI InnOvATIOnS
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. Enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
Fail-safe due to USB back-up / recovery stick Our intrinsically safe USB back-up / recovery stick contains all information required to get an HMI up and running again in case the Full Client / Thin Client has been damaged by external sources. The recovery of the HMI is very simple, it is menu-controlled and works without any particular network expertise or additional software. The USB stick is intrinsically safe and can be plugged and unplugged directly inside the hazardous area.
www.stahl-hmi.de10
HMI for Driller Cabin ATEXZone1/IECExZone1,Class1
The new SR displays are ideally suited to display any control and monitoring process in the driller cabin. The SR display's intelligent pole filter technology blocks out distracting reflections and glare, thus ensuring best readability even in direct sunlight. The operator has everything under control and is able to quickly respond to any critical event that might occur during drilling operations.
• Innovative15"SunlightReadabledisplay forglare-freemonitoring• 19"ashighbrightnessdisplayswithsuncanopy• Widerangeofdisplaysfrom15"to24"• Alldisplaysalsoascontrolpanelinsertmodule.• Optimumcursorcontrolduetoinnovative joystickdesign• Customizedcommunicationdesignpossible (CANBus,etc.)
R. STAHL HMI InnOvATIOnS
Customised Joystick SolutionsBased on their excellent knowledge, R. STAHL HMI Experts are able to design customised joystick solutions for hazardous areas – offering a bespoke cursor operation in the rig control room.
WWW.EXICOM.DE 11
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
KvM Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C
Display Sizes 19“ | 22“ | 24“ | 24“ WU
Hardware
KVM Box data transmission: Copper - up to 150m (Standard) / 500m optionallyFiber optic – Multi mode up to 500m / Single mode up to 10km
Interfaces
Data Ex e or Fiber optic Ex op is, USB Ex ia, USB Ex ia, RS-232 / RS-422 / RS-485 Ex e, Reader card readers / barcode scanners, FBAS Ex Audio line out Ex e, WLAN via USB Ex e, KVM-BOX
www.stahl-hmi.de12
HMI for Wireline Applications ATEXZone1/IECExZone1,Class1
In wireline applications permanent monitoring and control of the cable routing in the drilling hole is of particular importance – any distracting reflections and glare could affect the monitoring and control process. The new, innovative SR display and its intelligent pole filter technology blocks out distracting reflections and glare, thus ensuring best readability even in direct sunlight. The operator has everything under control and is able to quickly respond to any critical event that might occur during drilling operations.
• Innovative15"SunlightReadabledisplay forglare-freemonitoring• 19"ashighbrightnessdipslayswithsuncanopy• Widerangeofdisplaysfrom15"to24"• Alldisplaysalsoascontrolpanelinsertmodule.• Individualandcustomizedenclosures• Customizedcommunicationdesignpossible (CANBus,etc.)• FullClients(PanelPCs)withWindows7Ultimateor EmbeddedStandard2009etc• ThinClientswithR.STAHLRemoteFirmwarefor maximumsecurityandpermanentdatacontrol
WWW.EXICOM.DE 13
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
R. STAHL HMI InnOvATIOnS
HMI with pre-installed operating systemsAll Panel PCs are ready-to-run worldwide, with pre-installed, multilingual Windows Embedded Standard 2009, XP Professional MUI or -7 Ultimate operating system (QNX, Linux optional) – without time-consuming installation of drivers or operating systems. All pre-installed operating systems are protected against external manipulations. In the rare case of a system failure, the BACKUP/RECOVERY solution via USB stick enables users to immediately restore the original state.
www.stahl-hmi.de14
Widescreens for Container Applications
R. STAHL HMI is the only provider of widescreen monitor solutions for container applications in hazardous areas, Zone 1. Even in the event of an explosive atmosphere, the widescreens are able to remain functional and ensure optimal visualization and operation. The high brightness widescreens that can also be arranged in a dual-monitor setup allow comprehensive monitoring of processes, analyses and applications such as the Workover Control System. Keyboard and mouse modules meet ergonomics standards (EN ISO 9241-400) and help to minimize fatigue while working in the container.
• Large-scalevisualizationwithwidescreensorwallmonitoring• 19“to24“FullHD/24”WU(1920x1200)• Simpleworkingwithexplosion-protectedstandardkeyboard/mouse• Variousdataprocessingtechnologies(FullClient,ThinClient,KVM)• FullClients(PanelPCs)withWindows7UltimateorEmbeddedStandard2009etc• ThinClientswithR.STAHLRemoteFirmwareformaximumsecurityandpermanentdatacontrol
R. STAHL HMI InnOvATIOnS
Explosion-protected standard mouse / keyboardTo ensure a fast and reliable operation of processes in containers we have developed explosion-protected mouse / keyboard modules that are very similar to those used in normal offices. This makes operation easier and helps the operators, since they do not have to first get used to industrial pointers and keyboards.
WWW.EXICOM.DE 15
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
KvM Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C
Display Sizes 19“ | 22“ | 24“ | 24“ WU
Hardware
KVM Box data transmission: Copper - up to 150m (Standard) / 500m optionallyFiber optic – Multi mode up to 500m / Single mode up to 10km
Interfaces
Data Ex e or Fiber optic Ex op is, USB Ex ia, USB Ex ia, RS-232 / RS-422 / RS-485 Ex e, Reader card readers / barcode scanners, FBAS Ex Audio line out Ex e, WLAN via USB Ex e, KVM-BOX
www.stahl-hmi.de16
HMI for Tankfarm & Refinery Applications
R. STAHL HMI offers the full product range for operating stations for installation in refineries and tankfarms. Be it as Full Client / Thin Client or as EAGLE Operator Interface – many designs are available that are suitable for each application. The Full Clients (Panel PCs) are designed as OPEN HMIs and, with their pre-configured operating systems, are able to run each software. The Thin Clients are designed for the incorporation in a network structure and are supplied with Remote HMI firmware, ensuring simple operation, maximum security and permanent data control. All EAGLE Operator Interfaces are designed as “closed units” with their own real-time operating system, making them safe from outside viruses. As a further option, EAGLE HMIs can process as part of PLC applications or can be used for identification purposes in tankfarms.
• Therightterminalforeachapplication–FullClient, ThinClient,EAGLEOperatorInterface• AllHMIswithvariousRFIDavailable• EAGLEformodernEthernetprotocols:Profinet/ EthernetIP/ModbusTCP,optionalwithaffordable SPSPlusWinsoftware• Canbeinstalledworldwideintemperaturesranging from-30°C…+50°C
R. STAHL HMI InnOvATIOnS
various RFID optionsSECURITY and ACCESS CONTROL are key functions in petrochemical plants. For the control of access to the HMI of authorised persons we provide various RFID solutions: Mifare card readers, Wiegand card readers and customized solutions for identification in hazardous areas.
WWW.EXICOM.DE 17
Therighttechnologiesforyourapplications:
Full Client (Panel PC) Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°C Operation with heater and protection screen -40°C … + 50°C
Display Sizes 10.4“ | 15“ SR | 19“ | 22“ | 24“ | 24“WU
HardwareATOM 1.6 GHz, 1/2 GB RAM, 4/16 GB (Solid StateCard), SHD 100 GB, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Operating Systems
Multilingual Windows Embedded Standard 2009, XPProfessional MUI, Windows 7 Ultimate, QNX & Linuxoptional
Thin Client Technology
Operation -20°C … + 60°C (perm. oper. +50°C)Operation with heater -30°C … + 50°COperation with heater and protection screen -40°C … + 50°C
Display Sizes 15“ SR | 19“ | 22“ | 24“ | 24“WU
Hardware GEODE / ATOM processor, > 23.6 kg incl. enclosure
Interfaces
Ethernet 10/100BaseTx Ex e, Fiber Optic 100BaseFx,100 Mbit Ex op is. USB Ex ia, USB Ex e, RS-232/RS-422/ RS-485 Ex e, Reader box for card reader /barcode scanner, FBAS Ex e (video), Audio line out Ex e, WLAN via USB Ex e
Security / Firmware
Remote HMI firmware based on Windows EmbeddedStandard 2009 / Backup Recovery Stick
EAGLE Operator Interface
Operation -20°C … + 55°COperation with heater -30°C … + 55°COperation with heater, enclosure insulation and protection screen -40 °C up to +55 °C
Display Sizes 10“ | 15“ SR
Hardware
Display with touchscreen and function keys, external keyboard Ex i 105 keys, Processor LX800 266MHz, RAM 256 Mbyte, Special closed operating system, global multilingual support
InterfacesData Ex e or Fiber optic Ex op is, USB Ex ia, USB Ex e, RS-232 / RS-422 / RS-485 Ex e, RSi interface for card readers / barcode scanners, Audio line out Ex e, WLAN via USB Ex e
www.stahl-hmi.de18
R. STAHL HMI Performance for the Oil & Gas Industry Software / Firmware• Variousmulti-lingualoperatingsystemspre-installed• Ownreal-timeoperatingsystems• RemoteHMIFirmwarefornetworkstructures• EngineeringsoftwareSPSPlusWin
Hardware• Displayaspanelmountmodules10”to24”WU• Standardkeyboards• Customizedkeyboards• Back-up/RecoveryStick• RFIDsolutions• Barcodescanners
Standard Enclosures / Panel Mount Modules
Customized Enclosures
WWW.EXICOM.DE 19
ProductionOur highly specialised production sites provide standard products as well customer-specific HMI solutions. High quality standards, professional production methods and short communication paths are the basis for our highly reliable Human-Machine Interfaces for permanent operation in hazardous areas.
Hardware / Software Support CentreIn the rare event of any problems arising with our HMIs these require immediate solution. Our Support Centre experts are highly specialised and trained and will find a speedy solution for your problem.
ConsultationApplication for drilling rigs, refineries or tank farms require special expertise: our oil and gas specialists are available to help you find the right HMI, software and accessories for your application.
Oil & Gas Sales Specialist Please contact our experts directly at:
sales@stahl-hmi.de
+49 (0) 221 59808 53 (8.30 – 12.00 / 13.00 – 16.30 CET)
top related