off depending on the offer - chauvin arnoux metrix · • analysis and report creation software...
Post on 12-Jul-2020
5 Views
Preview:
TRANSCRIPT
Power and energy analyser
C.A 8336 + MA193
Thermal cameraC.A 1950
+ Android tablet
Digital ammeter with flexible sensorMA4000D-350
FREE + processing software
Oscilloscope with isolated channelsOX 5042-CK
TRMS multimeter
clampF403
€ 379ex-VAT
€ 492 ex-VAT
€ 4,640 ex-VAT
€ 6,161 ex-VAT
€ 2,072 ex-VAT
€ 1,650 ex-VAT
TRMS multimeter clamp F403
DUO PACKup to
25%depending on the offer
AUTUMN 2015
OFFERS3EXCLUSIVE
from 1st October 2015 to 15th January 2016DUO PACK OFFERSIndustrial Maintenance
High performance for your applications at exclusive prices!
OFF
FREE
NEW
*Tablet: offer valid only for the Lenovo A8-50 model valued at € 159 inc-VAT or similar model.
F403 clamp
Ideal with its measurement and troubleshooting functions • Current: 1,000 AAC / 1,500 ADC
• TRMS AC/DC voltage: 1,000 V• Measurement: resistance, frequency,
temperature, overcurrents• Ø: 48 mm
DigiFLEX MA4000D-350Ideal with its flexible sensor for measuring in confined spaces and its extended current measurement• TRMS AC current: 4,000 AAC
• Bandwidth: up to 3 kHz• Direct reading of current• Ø: 100 mm
1000 V CAT IIIIP54
1000 V CAT III IP54
HANDSCOPE OX 5042-CKIdentify any electrical signal faults3-in-1 multifunction instrument with 2 channels:• 40 MHz oscilloscope• Double multimeter• Power and harmonics analyser• Integrated multilingual interactive help function
F403 clampDetect any load anomalies• Current: 1,000 AAC / 1,500 ADC
• TRMS AC/DC voltage: 1,000 V• Measurement: resistance, frequency,
temperature, overcurrents• Ø: 48 mm
IP54
DUO PACK TRMS multimeter clamp & Digital ammeter with flexible sensor
DUO PACK Handheld oscilloscope with 2 isolated channels & TRMS multimeter clamp
F403 & MA4000D-350 Pack
Offer ref.: P01299957
SOLUTIONS Industrial Maintenance
Tip : store your reports to facilitate your work in the field!
OX 5042-CK & F403 PACKOffer ref.: P01299959
+ FREE GIFT Android tablet
8’’ – 16 GB*
FREE
€ 379ex-VAT
€ 492 ex-VAT
20%OFF
more than
20%OFF
more than
€ 2,072 ex-VAT
€ 1,650 ex-VAT
DUO PACK New thermal camera & Power and energy quality analyser
Three-phase network and energy analyser Qualistar+ C.A 8336 with 4 current sensors (Ø : 70 mm)
Measure, analyse and fine-tune your electrical network.This high-performance instrument can be used for a comprehensive energy survey of your installation• 5 voltage inputs & 4 current inputs • Inrush mode over 10 minutes• Calculation of distorting power• Network analyser compliant with the EN 50160 standard• Menu and help function available in 27 languages
1000 V CAT III600 V CAT IV
IEC 61010IEC 61000-4-30
Industrial MaintenanceSOLUTIONS
Thermal camera Diacam2 C.A 1950 Perform accurate thermal inspections and quickly identify any faults on your installations (poor connections, damaged fuses, faulty circuits)• Camera with 80x80-pixel matrix plus real image• Voice annotation function • Temperature up to 250°C• Field of view 20°x20°, (Focus-Free)• Resolution 320×240• Battery life: 13 hours• Analysis and report creation software included
C.A 1950 & C.A 8336 Packwith 4 Mini FLEX™ MA193 sensorsOffer ref.: P01299958
+ FREE GIFT
processing software
This allows you to print reports in
compliance with the voltage
quality standards.
25%OFF
FREE
€ 4,640 ex-VAT
€ 6,161 ex-VAT
IP54 warranty2 2
m NEW
Chauvin Arnoux International190, rue Championnet75876 PARIS Cedex 18 - FRANCETel. : +33 01 44 85 44 38Fax : +33 01 46 27 95 59export@chauvin-arnoux.frwww.chauvin-arnoux.com
Your distributor
Day-to-day use of your Packs�Inspection and maintenance of tertiary or industrial electrical installations and machinery, troubleshooting and/or sizing of the electrical power supply, thermal inspections, etc. Discover the specific features of each Pack and choose the one which meets your needs.
SOLUTIONS
Examples of applications This list is not exhaustive
F403 & MA4000D PACK
OX 5042-CK & F403 PACK
C.A 1950 & C.A 8336 PACK
€ 379 ex-VAT € 492 ex-VAT
€ 1,650 ex-VAT € 2,072 ex-VAT
€ 4,640 ex-VAT € 6,161 ex-VAT
Pow
er s
uppl
y
Testing of electrical power supply Electrical maintenance Checking of installation sizing:connections, AC and DC measurement, process synchronization
Current measurement in confined spaces Machinery inrush current measurement Motor operation test RCD maintenance
Elec
troni
c pr
oces
s
Electronic maintenancel�detect signal fluctuation or driftl�detect induced noise and disturbancesl�verification of PLC synchronization
Analysis of signals in machine command-control systems Verification of mechanical linkage Electronic circuit testing and qualification PCB testing Metrological verification
Ener
gy p
erfo
rman
ce &
ne
twor
k qu
ality
Search for network disturbances:detection and measurement of harmonics
(Measurement up to
31st order)
(Measurement up to
50th order)
Measurement of transients Comprehensive power survey of an installation Voltage quality diagnostics on an installation Load surveys before adding extra instruments Energy performance Energy audit
Ther
mal
in
spec
tion Thermographic inspections
and troubleshooting l� Locate hot spots in electrical systems
and components and in mechanical systemsl� Detect heat loss in buildings
Industrial Maintenance
DP34
95 -
June
201
5 - N
on-c
ontra
ctua
l doc
umen
t – L
enov
o is
a re
gist
ered
trad
e m
ark
of L
enov
o; (L
enov
o is
not
a p
artn
er o
f thi
s pr
omot
iona
l offe
r) -
Plea
se c
onfir
m s
peci
ficat
ions
w
hen
orde
ring.
Thi
s of
fer c
anno
t be
com
bine
d w
ith o
ther
offe
rs a
nd is
val
id fr
om 1
st O
ctob
er 2
015
to 1
5th J
anua
ry 2
016,
exc
ept i
n m
etro
polit
an F
ranc
e an
d Sw
itzer
land
.
top related