october 23, 2013 faculty senate chambers meeting … · faculty fellows qep at a glance qep...
Post on 09-Sep-2018
218 Views
Preview:
TRANSCRIPT
Date: October 23, 2013 Quorum: 12
Meeting schedule: 12:30-2:30 p.m .
Call to Order
Approval of the Minutes
Presenter: Action: Type:
n/a October 9, 2013 Meeting Minutes Minutes
Presenter: Reviewers: Action: Type:
Ghosh Auerbach, Borden, Brothers MT 366-Biotextile Product Dev.
Rev: Content, pre/co-req,
catalog desc., learning
outcome
Ghosh Auerbach, Borden, Brothers TT 327-Yarn Production & Properties New Course
Ghosh Carson, Despain, Nowel TT 401-Textile Tech. Senior Design I New Course
Ghosh Carson, Despain, Nowel TT 402-Textile Tech. Senior Design II New Course
Ghosh Ozturk, Parker, Piedrafita 18TXTECHBS - Undesignated New Concentration
Ghosh Ozturk, Parker, Piedrafita 18TXTECHBS - Medical Textiles Rev in Concentration
Ghosh Ozturk, Parker, Piedrafita 18TXTECHBS - Technical Textiles Rev in Concentration
Ghosh Ozturk, Parker, Piedrafita 18TXTECHBS - Textile Supply Chain Oper. Rev in Concentration
Hessling Woodard, Merrill, Parish ECI 201-Intro to Instruct. Tech for Educators
Rev: Content, cr/contact
hrs, catalog desc., learning
outcomes
Hessling Woodard, Merrill, Parish 13ELMEDBS - Elementary Education Rev. in 8 semester display
Announcements
Instructional format subcommittee to meet directly after meeting.
Major Actions
UCCC AGENDA
Location: Faculty Senate Chambers
Minutes Recorder: Gina Neugebauer
Welcome, Guest Introduction and Remarks - Chair, Robert Warren
Remarks from Dr. Barbara Kirby, Associate Vice Provost (AVP) Academic Programs and Services
1
DRAFT DRAFT
1
UCCC Minutes- October 9, 2013
Room-Faculty Senate Chambers
Call to Order: 12:30 pm
Members Present: Chair Robert Warren; David Auerbach; Ted Branoff; Keith Brannum; Gene Brothers; Susan Carson; Scott
Despain; Tushar Ghosh;; Tom Koch; Melissa Merrill; Andy Nowel; Hatice Ozturk; David Parish; Santiago Piedrafita; Roger
Woodard
Ex Officio Members Present: Charles Clift; Catherine Freeman; Barbara Kirby
Recurring Guests Present: John Harrington; Li Marcus
Members Absent: Roy Borden (E); Gene Brothers (E); Debbie Currie; Katherine Gammon; Rakeshreddy Kesireddy; Gerald
Lucovsky; Kim Outing; Frederick Parker; Rebecca Swanson (E); Holly Swart (E)
Guests: Melissa Williford (proxy for Rebecca Swanson); Meredith Davis (QEP); Pat Spakes (QEP); Marjie Srsic(Office of
Assessment); Carrie Zelna (Office of Assessment)
WELCOME AND INTRODUCTIONS
Remarks from Chair, Robert Warren:
Chair Robert Warren greeted the committee to the UCCC meeting, extending a welcome to the guests in attendance: Meredith Davis
(QEP), Pat Spakes (QEP), Marjie Srsic (Office of Assessment), and Carrie Zelna (Office of Assessment)
QEP Presentation
Meredith Davis presented the goals and expectation of the QEP committee. The purpose of this initiative is to track the confidence of
NCSU students throughout their academic career. What has been documented is that NCSU students arrive as freshman believing they
possess creative and critical thinking skills. However, their confidence appears to lessen once they enter the workplace. QEP hopes to
facilitate NCSU’s students’ confidence and ability in critical and creative thinking skills. Dr. Davis assured the committee that if
changes were to be made to the courses used to assess students, UCCC would be notified. The courses would go through the standard
process for review. She noted that students are not being taught new content, but rather are being taught the standard information in
new ways. Dr. Davis solicited UCCC’s support for the QEP if the committee felt the plan was moving in the right direction. A
member made a motion to support the QEP plan as presented; it was seconded, and APPROVED unanimously.
Reference Items Used In
Presentation
QEP Website
Project Timeline
Faculty Fellows
QEP At a Glance
QEP Director
QEP Timeline
OLD BUSINESS
ISE 352 Fundamentals of Human-Machines Design-APPROVED unanimously.
ISE 452 Advanced Human-Machines Design-APPROVED unanimously.
2
DRAFT DRAFT
2
CONSENT AGENDA
Approval of Consent Agenda:
A motion was made and seconded to approve these courses as a consent agenda, with the exception of the Non-Profits Minor
separately. Without any further discussion, the motion was APPROVED unanimously.
Presenter Action Type
n/a September 25, 2013 Minutes
Koch Hon 101, 102, 201, 343, 351, 361 Drop Courses
Parker LSC (Life Sciences) Course Prefix New Course Prefix
Parker BS Extension Education - Communication conc. Discontinue Concentration
Carson AEC (Applied Ecology) Course Prefix New Course Prefix
Carson BIO 419 (Limnology), BIO/FW 420 (Intr to Fisheries Sci), BIO/FOR 423
(Introduction to Fish.Sci. Lab), BIO 441, BIO 442 Revision: Change BIO Prefix to AEC
Carson AEC 295 Special Topics in Applied Ecology New Special Topics Shell
Carson AEC 495 Advanced Special Topics in Applied Ecology New Special Topics Shell
Parker ALS 110 Academic and Career Skills Seminar Revision: Title, Catalog Description
Parker ENT 172 Vertebrate Pest Management Drop Course
Despain FLS 399 Intensive Spanish Oral Proficiency Wrkshp Revision: Pre-requisite
Auerbach PHI 440 The Scientific Method Revision: Pre-requisite
Auerbach PHI 333 Theory of Knowledge --> Knowledge and Skepticism Revision: Title
Auerbach PHI 330 Metaphysics Revision: Catalog Description
Auerbach PS 315 --> LPS 315 Revision: Prefix to LPS
Despain BA Leadership in the Public Sector Revision: Add PS 201 as elective
Auerbach BA Arts Studies - Visual Arts conc Revision: Add HA 298 as elective
Koch Academic Minor: Military Studies - Army and Navy Add course to elective list
Nowel BS Management -Undeclared --> BS Management - First Year Revision: Title
Parker Certificate: University Associate Certificate in Agribusiness Management Revision: Add ARE 133 as elective
Parker BS Agricultural Science Revision: Add AEE 103 or ALS 303 as
option to ALS 103
Non Profits Study Minor-APPROVED unanimously.
Discussion: One member wanted more information about what the revision to the three courses being added to the minor
would entail. After the presenter, Scott Despain, explained that the three courses would be added to the elective portion of
the minor, the committee member was satisfied. Another member wanted to check that the Accounting Department had
given a consult, and the estimate of students that would take these courses per semester. The committee confirmed that these
courses would only be open to students pursuing Accounting majors and minors and that the necessary consult could be
found in the Agenda & Actions handout. The anticipated number of enrollment is five students per semester. With no more
discussion the action was APPROVED unanimously.
MAJOR ACTIONS
HESD 274- Modern Dance I- APPROVED unanimously.
HESD 275- Modern Dance II- APPROVED unanimously.
AEC 400- Applied Ecology- APPROVED unanimously.
Discussion: One member was concerned with the instructor’s sentiment towards excuses for missed work and unexcused
absences. While she understood the need to explain the attendance policy, she felt that the excuse examples were not
appropriate to list. The committee determined that this was something to be determined by the instructor. With no further
discussion the action was APPROVED unanimously.
HA 310- History of Art and Photography- APPROVED unanimously with friendly suggestions.
Discussion: One member noted that the grading scale did not include an A+. This opens the professor up to students’
challenges to grading. Many members thought that the grading policy was clear on its grading scale +/-. Dr. Kirby explained
that the Grading Policy and Regulation was adopted with the +/- scale being the standard. However, the wording implies that
instead of having to adhere to the standard, faculty and departments are encouraged to. Some faculty and departments take
3
DRAFT DRAFT
3
this to mean that it is optional. Students tend to challenge a professor who does not adhere to the +/- system, especially
when said students are on the borderline of B+ and A-, so some departments have adopted the +/- to avoid these issues.. The
presenter will check to see if the instructor meant to leave off the A+.
Another member noted that the course objectives do not have the correct language. The objectives explain what the instructor
is doing, not what the student will learn or can do. Another member suggested deleting the course objectives and just keeping
the GEP learning outcomes. Because this course is changing in its numbering, once is approved by UCCC, it will go before
CUE for review. However, there is a possibility that the course will not be approved by CUE for the VPA GEP category.
Another member worried that the course objectives may not be specific enough for an upper level course. How will students
be assessed on their skills? The presenter will speak to the instructor on what they would prefer to do.
Without further discussion, the action was APPROVED unanimously Pending clarification of the course outcomes and
GEP outcomes. Friendly suggestions to determine A+ on the grading scale.
LPS 205- International Leadership Strategies for the Public Sector-APPROVED unanimously.
DISCUSSION
400 Level GEP Courses
Dr. Kirby gave an overview of the conversation currently occurring in CUE. She noted that NCSU is going through the SACS
accreditation process, as are two other UNC system institutions. Among the institutions in the UNC system there have been clear
differences in how the General Education Program is administered. For example, at UNC-Chapel Hill they perceive that their students
receive a ‘broad’ education, and can therefore comprehend the subject matter at various levels. Their GE course offeringsmayspan all
levels of courses including graduate level courses. At Chapel Hill, a standard numbering system is used but students are told that they
should not assume the courses are arranged in ascending order of difficulty or specialization. Students are cautioned to check the pre-
requisites to determine if they are prepared to take the course. The numbering scheme is unique to the department. The University of
Tennessee-Chattanooga states the general education courses require no prior level college background in the area of study. UNCG
restricts general education courses to the 100, 200 and 300 level courses. Prerequisites also play into the General Education Program.
How narrow can a course be before a student would need to have discipline specific prerequisite to understand the material in a 400-
level course? Dr. Kirby noted that she has heard from departments that students need to take upper level GEP courses at the senior
level. Waiting until senior year to complete a gen ed requirement creates graduation issues if a senior is unable to enroll in a course
needed for GEP fulfillment.
The concern is that with more advanced courses at the 400-lvel, students will struggle more so than at the 300-level.
More courses are being brought before CUE at the 400 level, or revising existing GEP courses to be at the 400-level. An additional
concern is that some of these 400 level courses are also cross listed with 500 level courses intended for graduate students. One
member asked how often a student receives GEP credit for a 400-level course. The actual number of students who take higher level
courses for GEP credit is being researched with Registration and Records’ help. Dr. Kirby explained that presently, if one ignores the
HES category, thirty percent of GEP courses are at an upper level. One member noted that she supports upper level GEP courses as
she believes it helps students obtain minors and fill requirements. Another member noted that if a student is gaining a minor from
fulfilling a GEP requirement, then it may not be broadening their education. In the case of HA 410 (Formerly HA 310), the status of
their GEP categorization will not be decided until the CUE Task Force gives a recommendation on upper level GEP classes. Thus, its
status will not be determined at this time..
Departmental Certificates-Change in Title
Dr. Kirby explained that the lack of university oversight concerning departmental certificates is a SACS issue. University sanctioned
certificates are assessed and transcripted. UNC-GA is notified and the certificate is entered into our certificate program inventory on
the general administration website. The current University Undergraduate Certificates are on the OUCC website . A University
Certificate moves through the campus approval routing and is signed by the Chancellor and have assessment plans.
Dr. Kirby noted that there are departmental certificates in existence that UCCC and the administration do not know about. She
believes that many are intended for professional development, but are not shown on a student’s transcript. Students and employers call
wanting to know what a student took to complete a certificate. However, since these certificates do not exist at the university level, it
is up to the department to maintain records. Additionally, departments create their own certificates, and are not supposed to use NCSU
branding.
One member noted that certificates show specialization, and provides confirmation that an individual has expertise in a subject or
skill. Should this not be documented for alumni and/or possible employers? He also believes that if a department is not going to bring
forth a certificate to be assessed, then the university should at least know that the certificate is in existence. The university will need to
4
DRAFT DRAFT
4
know what the department is offering, and what courses constitute the plan of work for a departmental certificate. Another member
wondered if at even the departmental level there should be guidelines, such as credit hour limit. One committee member felt that
guidelines should be outlined, so that students are protected from enrolling in something that is not clearly outlined.
Another member wondered if a departmental certificate cannot be assessed, does it possess the validity to be a certificate at all? If it
cannot be assessed, then it cannot be categorized. Because students are taking courses believing they will receive a university
certificate, should this not be reviewed? Without funding from the department, this certificate would slowly fade out. One member
worried that some of the certificates being offered currently were ‘sketchy’ and only used to be money raisers - if there isn’t some
show of benefit to students, then the certificate is ‘sketchy’. The complete list of the undergraduate certificates presently being offered
is located from the Registration and Records site and also on the OUCC site.
One member asked if the certificate would be called Undergraduate Departmental Certificate and Graduate Departmental Certificate
of Accomplishment. Another member noted that she did not think that Undergraduate needed to be in the title, as the Graduate school
has already made a designation of its certificates. The consensus among the committee was that a change would occur in the naming
of departmental certificates; the only question is how best to reflect the difference between departmental and university certificates.
A motion was made to create a similar recommendation based on the graduate school process adopted in regards to University
Graduate Certificates, translating it to the certificates at the Undergraduate level. This motion was seconded. After some discussion,
an amendment was made stating that departments will still need to provide information concerning programs that departments do not
want to be University Certificates, in order to track them. This was then seconded. It was APPROVED by all, with the exception of
one abstention. An amendment to the amendment was made stating that UCCC accepts the outline and spirit of the graduate school
memo, subject to drafting undergraduate terminology. This motion was seconded. There was some discussion about the use of
Certificate in the title for a departmental ‘certificate of accomplishment’ since SACS does not distinguish between the types of
certificates, only that all certificates should be assessed. Dr. Kirby will discuss with the SACS liaison and the graduate school for
clarification. With no further discussion, the motion was APPROVED unanimously. After the amendments were made, the motion,
with its two amendments, was APPROVED by all, with the exception of one abstention. The passed motion was to create a similar
recommendation based on the graduate school process adopted in regards to University Graduate Certificates, translating it to the
certificates at the Undergraduate level, subject to drafting undergraduate terminology and that departments will still need to provide
information concerning programs that departments do not want to be University Certificates, in order to track them.
The meeting was adjourned at 2:24pm.
Respectfully submitted by Gina Neugebauer
5
N.C. STATE UNIVERSITY
UNDERGRADUATE COURSE ACTION FORM Effective September 2008
NOTE: Click shaded fields to type data and click on boxes to check.
DEPARTMENT/PROGRAM TEXTILE ENGINEERING, CHEMISTRY & SCIENCE / TEXTILE TECHNOLOGY
COURSE PREFIX/NUMBER MT 366
PREVIOUS PREFIX/NUMBER MT 366
COURSE TITLE BIOTEXTILE PRODUCT DEVELOPMENT
ABBREVIATED TITLE BIOTEXTILE PROD DEV
SCHEDULING Fall Spring X Summer Every Year X Alt. Year Odd Alt. Year Even Other
COURSE DELIVERY CHECK ALL THAT APPLY
ON CAMPUS X DISTANCE EDUCATION ONLINE REMOTE LOCATION
COURSE CREDIT/GRADING CREDIT HOURS 3 GRADING ABCDF X S/U
CONTACT HOURS See contact/credit hour
guidelines for detail.
LECTURE 3 SEMINAR LABORATORY PROBLEM STUDIO INDEPENDENT STUDY RESEARCH
INTERNSHIP PRACTICUM FIELD WORK IS COURSE REPEATABLE FOR CREDIT?
Y # REPEATS ALLOWED 2
INSTRUCTOR(S) (NAME/RANK) MARTIN W. KING / PROFESSOR DUAL APPOINTMENT?
ANTICIPATED ENROLLMENT Per semester 30 Per section
Will multiple sections be offered? Yes No X PREREQUISITE(S) COURSE(S) TO BE COMPLETED PRIOR TO ENROLLING
MT105, TT105 OR PCC101, TE200 OR CH 223,
ENFORCE PRE-REQUISITE CHECKING? YES
CO-REQUISITE(S) COURSE(S) TO BE TAKEN CONCURRENTLY WITH THIS COURSE
TT305, TT341 AND TT351
ENFORCE CO-REQUISITE CHECKING? YES
PRE/CO-REQUISITE FOR… LIST COURSE(S) THAT REQUIRE THIS COURSE AS A PRE/CO-REQUISITE
RESTRICTIVE STATEMENT (EX: MA AND AMA MAJORS ONLY)
THE STUDENT WILL BE INTRODUCED TO THE PROCESS OF NEW PRODUCT
DEVELOPMENT AS IT APPLIES TO MEDICAL TEXTILES AND BIOTEXTILES
COURSE IS REQUIRED FOR:
B.S. TEXTILE TECHNOLOGY (TT)
COURSE IS AN ELECTIVE FOR:
LIST DEGREE KEY FOR ALL CURRICULA OR IDENTIFY MINOR IN WHICH COURSE
SERVES OR WILL SERVE AS AN ELECTIVE
PROPOSED EFFECTIVE DATE AUGUST 2013
APPROVED EFFECTIVE DATE
COURSE REVIEW DUE
FOR COURSE ACTION FORM INSTRUCTIONS SEE
HTTP://WWW.NCSU.EDU/UAP/ACADEMIC-
STANDARDS/COURSES/CRSINST.HTML
PAGE 1
TYPE OF PROPOSAL
NEW COURSE DROP COURSE
REVISE COURSE REVISION IN: CONTENT PREFIX/NUMBER TITLE ABBREVIATED TITLE
CREDIT HOURS CONTACT HOURS
GRADING METHOD SCHEDULING
PRE/CO-REQUISITES RESTRICTIVE STATEMENT
CATALOG DESCRIPTION LEARNING OUTCOMES
GEP LEARNING OUTCOMES ONLY DUAL-LEVEL COURSE
GEP COURSE CHECK APPLICABLE CATEGORY BELOW:
HUMANITIES SOCIAL SCIENCES MATHEMATICAL SCIENCES
NATURAL SCIENCES
INTERDISCIPLINARY PERSPECTIVES
VISUAL & PERFORMING ARTS
PE/HEALTHY LIVING
GLOBAL KNOWLEDGE CO-REQ
U.S. DIVERSITY CO-REQ
THEMATIC TRACK DOCUMENTATION AS REQUIRED (CHECK ALL THAT APPLY)
COURSE JUSTIFICATION PROPOSED REVISION(S) WITH REASONS ENROLLMENT LAST 5 YEARS
NEW RESOURCES STATEMENT CONSULTATION WITH DEPARTMENT(S) PROVIDED
SYLLABUS (OLD AND NEW)
GEP CATEGORY OBJECTIVES
GEP STUDENT LEARNING OUTCOMES
MEANS OF ASSESSING GEP OUTCOMES
CATALOG DESCRIPTION: (INCLUDE ANY RESTRICTIVE, TRANSPORTATION, OR FEE STATEMENTS) (100 WORD LIMIT) Overview of the product development process for medical textiles and implantable biotextile devices. FDA classification system for medical and healthcare products. Review steps in identification of healthcare needs, market size and demand, product specifications and design, prototype fabrication and sterilization, in vitro testing of mechanical, chemical, surface and biological properties, in vivo animal testing, regulatory issues, consumer and clinical trials and explant analysis. Examples of medical textiles for personal hygiene, wound care, external support, orthopedic, general surgery, dental and tissue engineering applications.
SIGNATURE PAGE ATTACHED
6
MT 366 – Biotextile Product Development - Course Action May 2013. Justification for Course Action: Reasons for Proposed Revisions: In the revised curriculum all students will take three (3) “Technical Textile Product” courses. The one addressing “Medical Textiles” issues is this existing course: MT366 “Biotextile Product Development”. However, this existing course is currently offered only to Textile Technology students in the Medical Textile Concentration who already have a BIO183 Cell Biology course pre-requisite. The attached revisions to the MT366 course outline are so as to make this course of more general interest to all students in the Textile Technology program, and not require all TT students to take the BIO183 Biology course. To achieve this, the following changes are being proposed: i) The content of the course has been widened to cover all medical textile products
and implantable biotextiles. This is reflected in the revised catalog description and in the revised list of “Student Learning Outcomes”.
ii) The pre-requisites no longer require a cell biology course. Instead, the important concepts of cell biology, as they relate to blood cells, inflammatory cells and micro-organisms will be covered in the revised MT366 course outline (See attached).
iii) The other pre-requisite courses are those required in the revised Textile Technology curriculum, e.g. the polymer materials course, TE200, and the new yarn course, TT327.
Enrolment over Last 5 Years: 2009: 10 2010: 13 2011: 13 2012: 16 2013: 20
Resources Statement: No additional resources will be needed to deliver this revised course. Consultation with Other Departments: Not necessary Student Learning Outcomes: These are the seven (7) student learning outcomes listed in the revised course syllabus.
1. Explain the approach used by the Food and Drug Administration to classify medical textiles and implantable biotextile products into three classes of increasing risk.
2. Explain the product development process from identifying the healthcare need through to product delivery and patient use as it applies to medical textiles and implantable biotextile products.
3. Select the appropriate natural or synthetic, permanent or resorbable polymer for the development of particular healthcare, medical and surgical textile products.
7
4. Select the appropriate woven, nonwoven, knitted or braided textile structure to achieve the desired physical and mechanical performance of particular healthcare, medical and surgical textile products.
5. Select the appropriate surface modification or coating technology that will impart the desirable biological performance for particular healthcare, medical and surgical textile products.
6. Select the appropriate sterilization technique to ensure sterility of particular healthcare, medical and surgical textile products.
7. Discuss current and future uses of bioresorbable and electroactive polymers, drug delivery systems, genetically modified biopolymers and tissue engineering scaffolds in the development of new and innovative healthcare, medical and surgical textile products.
GEP Outcomes and Objectives: Not applicable
8
MT366-001 Spring 2014
BIOTEXTILE PRODUCT DEVELOPMENT
Catalog Overview of the product development process for medical textiles Description: and implantable biotextile devices. FDA classification system for medical
and healthcare products. Review steps in identification of healthcare needs, market size and demand, product specifications and design, prototype fabrication and sterilization, in vitro testing of mechanical, chemical, surface and biological properties, in vivo animal testing, regulatory issues, consumer and clinical trials and explant analysis. Examples of medical textiles for personal hygiene, wound care, external support, orthopedic, general surgery, dental and tissue engineering applications.
Credit, Time, 3 hours, 3 hour lectures per week and Place: MWF, 10:40 -11:30 am, Room 2209, College of Textiles Pre- TT105 or MT105 or PCC105, TE 200, and TT327 or their equivalent. Requisites: If you do not have the prerequisites, please see the instructor at the
conclusion of the first class period. It is the student’s responsibility to satisfy course prerequisites, or to obtain permission of the instructor to take the course.
Instructor: Dr. Martin W. King Office: Room 3305, College of Textiles Telephone: Office: 919-515-1011, Cellular: 919-291-2563 E-mail: martin_king@ncsu.edu Office Hours: By appointment (Sign up on weekly schedule by office door) Webpage: https://wolfware.ncsu.edu Student At the completion of this course, students will be able to: Learning Outcomes: 1. Explain the approach used by the Food and Drug Administration to classify medical textiles and implantable biotextile products into three classes of increasing risk. 2. Explain the product development process from identifying the health- care need through to product delivery and patient use as it applies to medical textiles and implantable biotextile products.
3. Apply the appropriate natural or synthetic, permanent or resorbable polymer for the development of particular healthcare, medical and surgical textile products.
4. Apply the appropriate woven, nonwoven, knitted or braided textile structure to achieve the desired physical and mechanical performance of particular healthcare, medical and surgical textile products.
9
5. Apply the appropriate surface modification or coating technology that will impart the desirable biological performance for particular healthcare, medical and surgical textile products.
6. Select the appropriate sterilization technique to ensure sterility of particular healthcare, medical and surgical textile products.
7. Discuss current and future uses of bioresorbable and electroactive polymers, drug delivery systems, genetically modified biopolymers and tissue engineering scaffolds in the development of new and innovative healthcare, medical and surgical textile products.
Textbook & Martin W King, Bhupender S Gupta and Robert Guidoin, "Biotextiles as Readings: Medical Implants”, Woodhead Publishing Ltd, Cambridge, UK, (2013) Additional readings and reference materials will also be available from the course webpage at https://wolfware.ncsu.edu.
Attendance: Attendance in lectures is highly recommended and is rewarded with an additional grade. An attendance roll will be taken during each lecture. The student is responsible for the material covered in class whether or not he/she is present. Three unexcused absences from lectures are allowed during the semester before attendance marks start to be lost. For each unexcused absence after three the student will lose 1% of his/her final grade. Please refer to the policy at: http://policies.ncsu.edu/regulation/reg-02-20-03
Excused When a student is absent for a legitimate medical, compassionate or Absence: University reason, she/he must submit written documentation to the instructor
explaining the reason, preferably in advance, but at least within one week of the event. This will then permit the student to sit a test at an alternative time, or receive a time extension for handing in homework or to delay completion of the course without penalty.
Evaluation: In order for students to be assigned a final grade for the course, she/he must complete the three tests and submit all homework assignments and the independent written project by their expected due date. The final grade for the course will be calculated from the following components:
Three tests (10% each) 30% Attendance 10% Five homework assignments (5% each) 25% Independent project – oral presentation 10% Independent project – written report 25% -------- Total: 100% -------- The final letter grade for the course will be obtained by using the conversion
table below, which gives the percentage range corresponding to each of the 13 letter grades.
10
Changes to The schedule of lectures, readings and assignments listed in the Schedule: proposed schedule is subject to change based on the needs and priorities of
the class. However, once agreed upon, the timing of the three tests cannot be changed.
Conversion A+ 95.00% and above Table: A 91.00 - 94.99% C 66.40 - 70.49% A- 86.90 - 90.99% C- 62.30 - 66.39% B+ 82.80 - 86.89% D+ 58.20 - 62.29% B 78.70 - 82.79% D 54.10 - 58.19% B- 74.60 - 78.69% D- 50.00 - 54.09% C+ 70.50 - 74.59% F 49.99% and below Student The TECS Department is not responsible for property left in the Property: lecture rooms, nor for assignments not given directly to the instructor. Graded
assignments will be returned to students during lecture periods. Disabilities: Reasonable accommodations will be made for students with verifiable
disabilities. In order to take advantage of available accommodations, students must register with Disability Services for Students1 at 1900 Student Health Center, Campus Box 7509, 515-7653. For more information on NC State's policy on working with students with disabilities, please see the Academic Accommodations for Students with Disabilities Regulation (REG -2.20.01)2
Course An on-line course evaluation (also known as a “class evaluation”) will Evaluation: be made available for students to complete during the last 2 weeks of the
Spring Semester; i.e. Wednesday April 16, 2014 at 12 noon through Wednesday April 30, 2014 at 8 am.
Students will receive an email message directing them to the website where
they can login using their Unity ID and complete the evaluation. All evaluations are confidential; instructors will not know how any one student responded to any question, and students will not know the ratings for any instructors.
Evaluation website: https://classeval.ncsu.edu/ Student help desk: classeval@ncsu.edu Academic Students are reminded that cheating or plagiarism in any form is totally Integrity: unacceptable behavior. In the University Policy on Academic Integrity,
http://www.northcarolina.edu/policy/index.php?tag=700.4.2+ academic dishonesty is defined as the "giving, taking, or presenting of
information or material by a student that unethically or fraudulently aids oneself or another on any work which is to be considered in the determination of a grade or the completion of academic requirements or the enhancement of that student's record or academic career". This means that any work submitted in this course for grading must be the work of the student who submits it and whose name is indicated on the assignment as the author.
1 http://dso.dasa.ncsu.edu/ 2 http://policies.ncsu.edu/regulation/reg-02-20-01
11
Copying someone else's work and presenting it as your own, allowing your work to be knowingly copied by someone else who presents it as their own work, and submitting joint work with another student but indicating that you are the sole author, are all examples of plagiarism. Clearly this is dishonest, and is not acceptable.
Penalties for such offences can include a failing grade for the assignment or
for the entire course and will automatically lead to a Report on an Academic Integrity Violation being submitted to the University Office of Student Conduct. Students unsure of what constitutes plagiarism should ask the instructor, call the Office of Student Conduct at 1115 Pullan Hall (919-515-2963), download and consult the University policy: POL11.35.1 and/or download “statements of “Academic Integrity” from the University’s webpage at:
http://policies.ncsu.edu/policy/pol-11-35-01 Policy on Late Missed exams, homework assignments, and any graded assignments And Incomplete as a result of an unexcused absence CAN NOT be made up. It is the Work student’s responsibility to ensure that computer issues do not impact course
deadlines! Students should regularly back up their computer files while working on assignments (refer to the “Course Workspace Lockers” section).. Arrangements for missed exams will be made on an individual basis provided it is an excused absence. Make-up exams may be given orally and ONLY for students with University-approved absences (REG02.20.3)3. Since in-class work is an in-class experience, there are no make-ups for in-class labs, except for University-approved absences.
3 http://policies.ncsu.edu/regulation/reg-02-20-03
12
Revised Course: MT366 – Spring 2014 Proposed Topics Lectures Types of medical textiles and biotextile products 2 Medical textile companies and products 1 Medical textiles supply chain 1 FDA Classification of medical textiles 2 “Medical” grade permanent and resorbable polymers 2 Review of extrusion spinning techniques 1 Woven medical textiles – structure, properties, applications 3 Nonwoven medical textiles – structure, properties, applications 2 Knitted medical textiles – structure, properties, applications 3 Braided medical textiles – structure, properties, applications 2 Blood components and surface thrombogenicity 2
Blood clotting cascade 2 Inflammatory cells, foreign body response and healing 2 Surface coating by wet chemistry, laminating, plasma treatment 2 Micro-organisms, anatomy and function 1 Antimicrobial agents 2 Commercial sterilization techniques 2 New product development process 1 -technical, business and regulatory issues 2 Healthcare hygiene products 1 Orthopedic external support devices 1 Wound closure and wound care products 2 Cardiovascular products 2 Tissue engineering scaffolds 1 Total: 42
13
MT366-001 Spring 2013 Proposed Schedule: ____________________________________________________________________________________________________________ Date Lecture Topic Weekly Readings Assignments ____________________________________________________________________________________________________________ Mon Jan 7 Introduction & course syllabus King, Overview of opportunities Wed Jan 9 Types of biomedical textiles in medical textiles Hand out Homework 1 - Identify Fri Jan 11 FDA Classification of medical textiles Gupta, MedTex2004, pp.76-88 biotextile products & companies Mon Jan 14 Biostable and resorbable polymers Ratner, Polymers, pp.67-79 Wed Jan 16 Melt, solution, dry & e-spun fibers Ratner, Bioresorbable & bio- Fri Jan 18 Biotextile companies, Review websites erodible materials, pp.115-126 Submit Homework 1, Class presentation Mon Jan 21 No lecture – Dr. MLK Jr, Day Holiday Chu, Suture materials, pp.142-164 Hand out Homework 2 – Select product Wed Jan 23 Woven biotextiles Ratner, Medical biotextiles, pp.86-106 polymer and fiber Fri Jan 25 Knitted biotextiles Warner, MedText2004, pp.372-377 Mon Jan 28 Braided biotextiles Hatch, Nonwoven fabrics, pp263-270 Wed Jan 30 Nonwoven biotextiles Ratner, Blood clotting cascade, Submit Homework 2 Fri Feb 1 Surface thrombogenicity, Test review pp332-338 Mon Feb 4 Greg Tourino,”Searching databases” Legendre, Initial Blood Retention Prepare for Test 1 Wed Feb 6 Test 1 Hand out Homework 3 - Select Fri Feb 8 Blood clotting cascade method of fabrication Mon Feb 11 Measuring thrombogenicity Ratner, Inflammation, pp296-303. Wed Feb 13 Inflammatory response Ratner, Surface modification, Fri Feb 15 Surface coatings pp.201-217 Submit Homework 3 Mon Feb 18 Antimicrobial agents Hill, Sterilisation, pp305-317 Hand out Homework 4 – Select coating Wed Feb 20 Guest lecturer, “Industry R&D” Michielsen, MedText2004, pp.262-272 Fri Feb 22 Sterilization methods White, MedsText2004, pp252-261 Mon Feb 25 Sterilization methods Chu, MedText2004, pp142-164 Submit Homework 4 Wed Feb 27 Sutures, biotextiles for wound closure Leung, MedText2004, pp165-183 Hand out Homework 5- Select Fri Mar 1 Designing sutures Jamiolkowski, MedText2004,pp108-141 a sterilization method _________________________________________________________________________________________________________
14
__________________________________________________________________________________________________________ Date Lecture Topic Weekly Reading Assignments __________________________________________________________________________________________________________ Mar 4 - 8 No lectures - Spring Break No readings this week No assignments this week Mon Mar 11 Barbed suture technology. Bendavid, Hernia repair Wed Mar 13 Designing hernia repair mesh King, In vitro study hernia repair mesh Fri Mar 15 In vitro evaluation of hernia mesh Submit Homework 5 Mon Mar 18 In vivo evaluation of hernia mesh King, in vivo study hernia repair mesh Prepare for Test 2 Wed Mar 20 Test 2 Fri Mar 22 Greg Tourino “Creating with WordPress” Mon Mar 25 Dr. Kristin Thoney “MT Supply Chain” Skender, MedTex2004, pp205-215 Hand out group project Wed Mar 27 Designing ACL synthetic ligaments Guidoin, MedTex2004, pp186-204 Fri Mar 29 No lecture, Spring holiday. Edwards, MedText2004, pp273-287 Mon Apr 1 Embolic protection devices King, Knee ligaments Work on group project webpage Wed Apr 3 Designing vascular prostheses Ratner, Burn dressings, pp602-614 Fri Apr 5 Designing endovascular prostheses King, Designing blood vessels Mon Apr 8 Guest Lecturer “New Product Sumanasinghe, Tissue engineering Evaluate group project webpages Commercialization”, Review Wed Apr 10 Test 3 Chung, Tissue engineering Fri Apr 12 Dr. Nancy Cassill: “Business issues”” Mon Apr 15 Tissue engineering products. Ratner, Multidisciplinary approach, Wed Apr 17 FDA and regulatory issues pp.1-9 Revise group project webpage Fri Apr 19 New product development process Mon Apr 22 Presentations of individual projects No readings this week. Finalize group project webpage Wed Apr 24 Presentations of individual projects Fri Apr 26 Presentations of individual projects Submit written independent project report on-line prior to 12 midday (EDT) ____________________________________________________________________________________________________________ MWK/130106
15
MT366-001 Spring 2013
BIOTEXTILE PRODUCT DEVELOPMENT
Catalog Biotextile product development of surgical implants designed for the Description: repair and replacement of tissues in cardiovascular, wound healing,
orthopedic, dental and tissue engineering applications. Mechanical, physical, chemical, surface and biological properties including cell/biotextile interactions of fibers and fibrous structures will be reviewed. Bioresorbable polymers, drug delivery systems, fiber reinforced composites, and strategies for surface modification will be reviewed in the light of material selection and structural design.
Credit, Time, 3 hours, 3 hour lectures per week and Place: MWF, 10:40 -11:30 am, Room 2209, College of Textiles Pre- TT105 or MT105 or PCC105, MT323, PCC203 or CH221, ZO160 or Requisites: BIO183, PY211 or PY205, or their equivalent. If you do not have the
prerequisites, please see the instructor at the conclusion of the first class period. It is the student’s responsibility to satisfy course prerequisites, or to obtain permission of the instructor to take the course.
Instructor: Dr. Martin W. King Office: Room 3305, College of Textiles Telephone: Office: 515-1011, Cellular: 291-2563, Home: 676-4331 E-mail: martin_king@ncsu.edu Office Hours: By appointment (Sign up on weekly schedule by office door) Webpage: http://moodle.wolfware.ncsu.edu Student At the completion of this course, students will be able to: Learning Outcomes: 1. Explain the host reaction to implantable biotextiles in terms of their inflammatory and immunological responses, as well as the blood coagulation pathway. 2. Explain the role of proteins, biotextile surface properties and cell / material interactions on the short and long term performance of biotextiles in various biological environments.
3. Describe the basic requirements for designing biotextile prostheses so that they can be delivered to function efficaciously in the repair and reconstruction of tissues in cardiovascular, wound healing, orthopedic, dental and tissue engineering applications.
4. Select the appropriate natural or synthetic polymers and fibers in the development of biotextile products for particular medical and surgical applications.
5. Select the appropriate flexible or rigid fibrous and textile structures for the design of biotextile products developed for particular medical and surgical applications.
16
- 2 - 6. Select the appropriate surface modification or coating technology for
the passivation and/or bioactivation of biotextile products developed for particular medical and surgical applications.
7. Discuss current and future uses of bioresorbable polymers, drug delivery systems, fiber reinforced composites and tissue engineering scaffolds in the development of new and innovative biotextile products.
Textbook & Readings will be taken form BS Gupta and MW King, "Medical Textiles Readings: 2004: Advances in Biomedical Textiles and Healthcare Products",
Industrial Fabrics Association International, Roseville, MN, 2004, ISBN: 0-935803-15-7.
If this title is not available at the Campus Bookstore then electronic copies of each chapter will be available to download from the Moodle Wolfware website. Additional readings and reference materials will also be available from this course webpage.
Attendance: Attendance in lectures is highly recommended and is rewarded with an additional grade. An attendance roll will be taken during each lecture. The student is responsible for the material covered in class whether or not he/she is present. Three unexcused absences from lectures are allowed during the semester before attendance marks start to be lost. For each unexcused absence after three the student will lose 1% of his/her final grade. Please refer to the policy at: http://policies.ncsu.edu/regulation/reg-02-20-03
Excused When a student is absent for a legitimate medical, compassionate or Absence: University reason, she/he must submit written documentation to the
instructor explaining the reason, preferably in advance, but at least within one week of the event. This will then permit the student to sit a test at an alternative time, or receive a time extension for handing in homework or to delay completion of the course without penalty.
Evaluation: In order for students to be assigned a final grade for the course, she/he
must complete the three tests and submit all homework assignments and the independent written project by their expected due date. The final grade for the course will be calculated from the following components:
Three tests (10% each) 30% Attendance 10% Five homework assignments (5% each) 25% Independent project – oral presentation 10% Independent project – written report 25% -------- Total: 100% --------
17
- 3 - The final letter grade for the course will be obtained by using the
conversion table below, which gives the percentage range corresponding to each of the 13 letter grades.
Changes to The schedule of lectures, readings and assignments listed in the Schedule: proposed schedule is subject to change based on the needs and
priorities of the class. However, once agreed upon, the timing of the three tests cannot be changed.
Conversion A+ 95.00% and above Table: A 91.00 - 94.99% C 66.40 - 70.49% A- 86.90 - 90.99% C- 62.30 - 66.39% B+ 82.80 - 86.89% D+ 58.20 - 62.29% B 78.70 - 82.79% D 54.10 - 58.19% B- 74.60 - 78.69% D- 50.00 - 54.09% C+ 70.50 - 74.59% F 49.99% and below Student The TECS Department is not responsible for property left in the Property: lecture rooms, nor for assignments not given directly to the instructor.
Graded assignments will be returned to students during lecture periods.
Disabilities: Reasonable accommodations will be made for students with verifiable
disabilities. In order to take advantage of available accommodations, students must register with Disability Services for Students at 1900 Student Health Center, Campus Box 7509, Voice: (919-515-7653), TTY: (919-515-8830), Fax: (919-513-2840), and URL: http://www.ncsu.edu/provost/offices/affirm_action/dss/.
For more information on NC State University policy on working with
students with disabilities, please see: http://policies.ncsu.edu/regulation/reg-02-20-01. Course An on-line course evaluation (also known as a “class evaluation”) will Evaluation: be made available for students to complete during the last 2 weeks of
the Spring Semester; i.e. Wednesday April 17, 2013 at 12 noon through Wednesday May 1, 2013 at 8 am.
Students will receive an email message directing them to the website
where they can login using their Unity ID and complete the evaluation. All evaluations are confidential; instructors will not know how any one student responded to any question, and students will not know the ratings for any instructors.
Evaluation website: https://classeval.ncsu.edu/ Student help desk: classeval@ncsu.edu
18
- 4 - Academic Students are reminded that cheating or plagiarism in any form is totally Integrity: unacceptable behavior. In the University Policy on Academic Integrity,
http://www.northcarolina.edu/policy/index.php?tag=700.4.2+ academic dishonesty is defined as the "giving, taking, or presenting of
information or material by a student that unethically or fraudulently aids oneself or another on any work which is to be considered in the determination of a grade or the completion of academic requirements or the enhancement of that student's record or academic career". This means that any work submitted in this course for grading must be the work of the student who submits it and whose name is indicated on the assignment as the author.
Copying someone else's work and presenting it as your own, allowing
your work to be knowingly copied by someone else who presents it as their own work, and submitting joint work with another student but indicating that you are the sole author, are all examples of plagiarism. Clearly this is dishonest, and is not acceptable.
Penalties for such offences can include a failing grade for the
assignment or for the entire course and will automatically lead to a Report on an Academic Integrity Violation being submitted to the University Office of Student Conduct. Students unsure of what constitutes plagiarism should ask the instructor, call the Office of Student Conduct at 1115 Pullan Hall (919-515-2963), download and consult the University policy: POL11.35.1 and/or download “statements of “Academic Integrity” from the University’s webpage at:
http://policies.ncsu.edu/policy/pol-11-35-01 MWK/mwk/130107
19
N.C. STATE UNIVERSITY
UNDERGRADUATE COURSE ACTION FORM Effective September 2008
NOTE: Click shaded fields to type data and click on boxes to check.
DEPARTMENT/PROGRAM 18TECS / TEXTILE TECHNOLOGY
COURSE PREFIX/NUMBER TT 327
PREVIOUS PREFIX/NUMBER N/A
COURSE TITLE YARN PRODUCTION AND PROPERTIES
ABBREVIATED TITLE YARN PRODUCTION AND PROPERTIES
SCHEDULING Fall X Spring Summer Every Year X Alt. Year Odd Alt. Year Even Other
COURSE DELIVERY CHECK ALL THAT APPLY
ON CAMPUS X DISTANCE EDUCATION ONLINE REMOTE LOCATION
COURSE CREDIT/GRADING CREDIT HOURS 4 GRADING ABCDF X S/U
CONTACT HOURS See contact/credit hour
guidelines for detail.
LECTURE 3 SEMINAR LABORATORY 2 PROBLEM STUDIO INDEPENDENT STUDY RESEARCH
INTERNSHIP PRACTICUM FIELD WORK IS COURSE REPEATABLE FOR CREDIT?
N # REPEATS ALLOWED
INSTRUCTOR(S) (NAME/RANK) WILLIAM OXENHAM / PROFESSOR DUAL APPOINTMENT? N
ANTICIPATED ENROLLMENT Per semester 30 Per section 30
Will multiple sections be offered? Yes No X PREREQUISITE(S) COURSE(S) TO BE COMPLETED PRIOR TO ENROLLING
TMS 211, MA 231 OR MA 241
ENFORCE PRE-REQUISITE CHECKING? YES
CO-REQUISITE(S) COURSE(S) TO BE TAKEN CONCURRENTLY WITH THIS COURSE
PY 212
ENFORCE CO-REQUISITE CHECKING? YES
PRE/CO-REQUISITE FOR… TT 341, TT 351
RESTRICTIVE STATEMENT (EX: MA AND AMA MAJORS ONLY)
COURSE IS REQUIRED FOR:
BS Textile Technology
COURSE IS AN ELECTIVE FOR:
PROPOSED EFFECTIVE DATE AUGUST 2013
APPROVED EFFECTIVE DATE
COURSE REVIEW DUE
FOR COURSE ACTION FORM INSTRUCTIONS SEE
HTTP://WWW.NCSU.EDU/UAP/ACADEMIC-
STANDARDS/COURSES/CRSINST.HTML
PAGE 1
TYPE OF PROPOSAL
NEW COURSE DROP COURSE
X
REVISE COURSE REVISION IN: CONTENT PREFIX/NUMBER TITLE ABBREVIATED TITLE
CREDIT HOURS CONTACT HOURS
GRADING METHOD SCHEDULING
PRE/CO-REQUISITES RESTRICTIVE STATEMENT
CATALOG DESCRIPTION LEARNING OUTCOMES
GEP LEARNING OUTCOMES ONLY DUAL-LEVEL COURSE
GEP COURSE CHECK APPLICABLE CATEGORY BELOW:
HUMANITIES SOCIAL SCIENCES MATHEMATICAL SCIENCES
NATURAL SCIENCES
INTERDISCIPLINARY PERSPECTIVES
VISUAL & PERFORMING ARTS
PE/HEALTHY LIVING
GLOBAL KNOWLEDGE CO-REQ
U.S. DIVERSITY CO-REQ
THEMATIC TRACK DOCUMENTATION AS REQUIRED (CHECK ALL THAT APPLY)
COURSE JUSTIFICATION X PROPOSED REVISION(S) WITH REASONS ENROLLMENT LAST 5 YEARS
NEW RESOURCES STATEMENT X CONSULTATION WITH DEPARTMENT(S) PROVIDED
SYLLABUS (OLD AND NEW) X
GEP CATEGORY OBJECTIVES
GEP STUDENT LEARNING OUTCOMES
MEANS OF ASSESSING GEP OUTCOMES
CATALOG DESCRIPTION: (INCLUDE ANY RESTRICTIVE, TRANSPORTATION, OR FEE STATEMENTS) (100 WORD LIMIT) THE PROCESSING OF NATURAL AND MAN-MADE, FIBERS AND FILAMENTS INTO YARNS. THE IMPACT OF FIBER SELECTION AND PROCESSING PARAMETERS ON THE QUALITY OF THE YARN AND SUBSEQUENT PRODUCTS. MAJOR PROCESSING ROUTES FOR STAPLE FIBERS AND FILAMENTS TOGETHER WITH RECENT DEVELOPMENTS IN APPLICABLE TECHNOLOGIES.
SIGNATURE PAGE ATTACHED
20
1. Course Justification
The course is required as a key component of the revised curriculum in Textile Technology. This new offering will consolidate the contents of previously offered courses in yarn production, into one integrated course. This measure was taken to avoid the duplication which was evident in earlier course offerings which consisted of:
o TT 221 – an introductory level course, covering the processing of staple fibers.
o TT 321 –this treated the topics introduced in TT 221 at a more advanced level
o TT 425 – an elective course which focused on the processing of filament yarns.
The combination of the contents of these into a single course (with increased credit hours) should benefit the students by illustrating that the principles of processing are similar for filament and staple fibers. Furthermore this will naturally lead to the growth area of composite yarns, where staple and filament yarns are combined into one structure. An added advantage is that this will make better use of available resources.
The course will be taken by sophomore students and will provide them with the required knowledge to advance through the curricula, as they move through the progression of stages in the textile supply chain.
2. Resources statement
The consolidation of two other classes into this single offering should afford some savings in resources. The course will be taught by the instructor who has to date been teaching TT 321. As soon as the current cohort of TT has passed TT 321, TT 321 and TT 425 will be dropped from course catalog.
3. Enrollment N/A
4. Proposed Syllabus
See Attached
5. General Education Course
N/A
6 Consultation correspondence
N/A
21
TT 327 Course Syllabus
TT 327 – Yarn Production and Properties
Section 001
FALL 2013
4 Credit Hours
Course Description
The processing of natural and man-made, fibers and filaments into yarns. The impact of fiber
selection and processing parameters on the quality of the yarn and subsequent products.
Major processing routes for staple fibers and filaments together with recent developments in
applicable technologies.
Learning Outcomes
Students will be able to:
Discuss the different methods of producing staple yarns
Outline and describe the various processes in textured yarn production, including the
evolution in processing and product.
Explain the effects of fiber selection and processing parameters on process and product
quality.
Categorize different yarn types and demonstrate their potential areas of application.
Course Structure
The course will consist of lectures and a laboratory section. For the laboratory the class will be
divided into groups with each group carrying out a slightly different project. It is intended that
the laboratory projects will involve all stages of processing from fiber to yarns and will include
material testing at each stage, and each group will submit interim and final project reports.
Course Policies
The College of Textiles has a policy of no food or drink in classrooms and students must also
be aware of the policies for each laboratory.
Instructors
William Oxenham (woxenham) - Instructor
Email: woxenham@ncsu.edu
Web Page: www.tx.ncsu.edu/woxenham
Phone: 919 515 6573
Fax: 919 515 8578
Office Location: 3409 College of Textiles
Office Hours: As arranged
Course Meetings
None.
22
Course Materials
Textbooks
The Technology of Short Staple Spinning - W. Klein
Edition: 6 volumes
ISBN: 0 900739 91 6
Cost: N/A
This textbook is optional.
Yarn Texturing Technology - Hearle, Hollick & Wilson
Edition: 1
ISBN: 1 85573 575 X
Cost: N/A
This textbook is optional.
Synthetic Filament Yarn - Demir & Behery
Edition: 1
ISBN: 0 13 440025 9
Cost: N/A
This textbook is optional.
Short Staple Yarn Manufacturing - McCreight, Feil, Booterbaugh & Backe
Edition: 1
ISBN: 0 89089 853 7
Cost: N/a
This textbook is optional.
Expenses
None.
Materials
None.
Requisites and Restrictions
Prerequisites
TMS 211
MA 231
Co-requisites
PY 212
Restrictions
None.
General Education Program (GEP) Information
GEP Category
This course does not fulfill a General Education Program category.
GEP Co-requisites
This course does not fulfill a General Education Program co-requisite.
Transportation
23
This course will not require students to provide their own transportation. Non-scheduled class
time for field trips or out-of-class activities is NOT required for this class.
Safety & Risk Assumptions
Students will work in laboratory spaces with industrial scale equipment. For your safety it is
essential that you exercise caution and adhere to all the rules and regulations of the
laboratory.
Grading
Grade Components
Component Weight Details
Quizzes 60% Four quizzes will be given during the semester and the three highest scores will be used in calculating the final grade.
Laboratory 20% Laboratory reports will be graded and account for up to 20% of the final grade
Homework assignments and Class Journal
20% Homework will be assigned and graded and every student is required to create a journal of their lecture notes and submit this for grading
Letter Grades
This Course uses Standard NCSU Letter Grading:
97 ≤ A+ ≤ 100
93 ≤ A < 97
90 ≤ A- < 93
87 ≤ B+ < 90
83 ≤ B < 87
80 ≤ B- < 83
77 ≤ C+ < 80
73 ≤ C < 77
70 ≤ C- < 73
67 ≤ D+ < 70
63 ≤ D < 67
60 ≤ D- < 63
0 ≤ F < 60
Requirements for Credit-Only (S/U) Grading
In order to receive a grade of S, students are required to take all exams and quizzes,
complete all assignments, and earn a grade of C- or better. Conversion from letter grading
to credit only (S/U) grading is subject to university deadlines. Refer to the Registration and
Records calendar for deadlines related to grading. For more details refer to
http://policies.ncsu.edu/regulation/reg-02-20-15.
24
Requirements for Auditors (AU)
Information about and requirements for auditing a course can be found at
http://policies.ncsu.edu/regulation/reg-02-15-04.
Policies on Incomplete Grades
If an extended deadline is not authorized by the instructor or department, an unfinished
incomplete grade will automatically change to an F after either (a) the end of the next
regular semester in which the student is enrolled (not including summer sessions), or (b)
the end of 12 months if the student is not enrolled, whichever is shorter. Incompletes that
change to F will count as an attempted course on transcripts. The burden of fulfilling an
incomplete grade is the responsibility of the student. The university policy on incomplete
grades is located at http://policies.ncsu.edu/regulation/reg-02-50-03.
Late Assignments
Assignments which are turned in late will be penalized at 15% per day.
Attendance Policy
Attendance
Students are expected to attend all classes and assigned laboratories.
For complete attendance policies, please see http://policies.ncsu.edu/regulation/reg-02-
20-03
Absences
None.
Makeup Work
None.
Additional Excuses Policy
None.
Academic Integrity
Academic Integrity
Students are required to comply with the university policy on academic integrity found in
the Code of Student Conduct found at http://policies.ncsu.edu/policy/pol-11-35-01
None.
Academic Honesty
See http://policies.ncsu.edu/policy/pol-11-35-01 for a detailed explanation of academic
honesty.
None.
Honor Pledge
Your name or ID number on any test or assignment indicates "I have neither given nor
received unauthorized aid on this test or assignment."
Electronically-Hosted Course Components
There are no electronically-hosted components for this course.
25
Accommodations for Disabilities
Reasonable accommodations will be made for students with verifiable disabilities. In order
to take advantage of available accommodations, student must register with the Disability
Services Office (http://www.ncsu.edu/dso), 919-515-7653. For more information on NC
State's policy on working with students with disabilities, please see the Academic
Accommodations for Students with Disabilities Regulation at
http://policies.ncsu.edu/regulation/reg-02-20-01.
Non-Discrimination Policy
NC State University provides equality of opportunity in education and employment for all
students and employees. Accordingly, NC State affirms its commitment to maintain a work
environment for all employees and an academic environment for all students that is free
from all forms of discrimination. Discrimination based on race, color, religion, creed, sex,
national origin, age, disability, veteran status, or sexual orientation is a violation of state
and federal law and/or NC State University policy and will not be tolerated. Harassment of
any person (either in the form of quid pro quo or creation of a hostile environment) based
on race, color, religion, creed, sex, national origin, age, disability, veteran status, or sexual
orientation also is a violation of state and federal law and/or NC State University policy and
will not be tolerated. Retaliation against any person who complains about discrimination is
also prohibited. NC State's policies and regulations covering discrimination, harassment,
and retaliation may be accessed at http://policies.ncsu.edu/policy/pol-04-25-05 or
http://www.ncsu.edu/equal_op/. Any person who feels that he or she has been the subject
of prohibited discrimination, harassment, or retaliation should contact the Office for Equal
Opportunity (OEO) at 919-515-3148.
Course Schedule
NOTE: The course schedule is subject to change.
Week 1 — TBD - TBD
Review – significance of fiber properties on process and product quality
Week 2 — TBD - TBD
Fiber and Yarn specifications, General processing routes for filament and staple
week 3 — TBD - TBD
Short staple opening cleaning blending
Week 4 — TBD - TBD
Short staple carding, drafting irregularities
26
Week 5 — TBD - TBD
Short staple combing and drawing
Week 6 — TBD - TBD
Long Staple opening, cleaning blending and carding
Week 7 — TBD - TBD
Long staple combing and drawing
Week 8 — TBD - TBD
Roving and ring spinning
Week 9 — TBD - TBD
Compact spinning and alternatives to ring spinning
Week 10 — TBD - TBD
Rotor spinning, jet and vortex spinning
Week 11 — TBD - TBD
Winding and twisting
Week 12 — TBD - TBD
Filament yarns – introduction to texturing - minor techniques plus hot fluid jet
Week 13 — TBD - TBD
False twist texturing
27
Week 14 — TBD - TBD
Air texturing and intermingling, core and covered yarns
Week 15 — TBD - TBD
Yarn types and their areas of application
28
N.C. STATE UNIVERSITY
UNDERGRADUATE COURSE ACTION FORM Effective September 2008
NOTE: Click shaded fields to type data and click on boxes to check.
DEPARTMENT/PROGRAM TEXTILE ENGINEERING, CHEMISTRY AND SCIENCE
COURSE PREFIX/NUMBER TT/401
PREVIOUS PREFIX/NUMBER
COURSE TITLE TEXTILE TECHNOLOGY SENIOR DESIGN I
ABBREVIATED TITLE TT SENIOR DESIGN I
SCHEDULING Fall Spring Summer Every Year Alt. Year Odd Alt. Year Even Other
COURSE DELIVERY CHECK ALL THAT APPLY
ON CAMPUS DISTANCE EDUCATION ONLINE REMOTE LOCATION
COURSE CREDIT/GRADING CREDIT HOURS 4 GRADING ABCDF S/U
CONTACT HOURS See contact/credit hour
guidelines for detail.
LECTURE 4 SEMINAR LABORATORY PROBLEM 2 STUDIO INDEPENDENT STUDY RESEARCH
INTERNSHIP PRACTICUM FIELD WORK IS COURSE REPEATABLE FOR CREDIT?
Y # REPEATS ALLOWED 1
INSTRUCTOR(S) (NAME/RANK) JULIE A WILLOUGHBY, ASSISTANT PROFESSOR DUAL APPOINTMENT?
ANTICIPATED ENROLLMENT Per semester 25 Per section 25
Will multiple sections be offered? Yes No PREREQUISITE(S) COURSE(S) TO BE COMPLETED PRIOR TO ENROLLING
TT 331, SENIOR STANDING
ENFORCE PRE-REQUISITE CHECKING? YES
CO-REQUISITE(S) COURSE(S) TO BE TAKEN CONCURRENTLY WITH THIS COURSE
N/A
ENFORCE CO-REQUISITE CHECKING? NO
PRE/CO-REQUISITE FOR… TT402
RESTRICTIVE STATEMENT (EX: MA AND AMA MAJORS ONLY) TT MAJORS ONLY COURSE IS REQUIRED FOR:
TEXTILE TECHNOLOGY
COURSE IS AN ELECTIVE FOR: NA
PROPOSED EFFECTIVE DATE FALL 2012
APPROVED EFFECTIVE DATE
COURSE REVIEW DUE
FOR COURSE ACTION FORM INSTRUCTIONS SEE
HTTP://WWW.NCSU.EDU/UAP/ACADEMIC-
STANDARDS/COURSES/CRSINST.HTML
PAGE 1
TYPE OF PROPOSAL
NEW COURSE DROP COURSE
REVISE COURSE REVISION IN: CONTENT PREFIX/NUMBER TITLE ABBREVIATED TITLE
CREDIT HOURS CONTACT HOURS
GRADING METHOD SCHEDULING
PRE/CO-REQUISITES RESTRICTIVE STATEMENT
CATALOG DESCRIPTION LEARNING OUTCOMES
GEP LEARNING OUTCOMES ONLY DUAL-LEVEL COURSE
GEP COURSE CHECK APPLICABLE CATEGORY BELOW:
HUMANITIES SOCIAL SCIENCES MATHEMATICAL SCIENCES
NATURAL SCIENCES
INTERDISCIPLINARY PERSPECTIVES
VISUAL & PERFORMING ARTS
PE/HEALTHY LIVING
GLOBAL KNOWLEDGE CO-REQ
U.S. DIVERSITY CO-REQ
THEMATIC TRACK DOCUMENTATION AS REQUIRED (CHECK ALL THAT APPLY)
COURSE JUSTIFICATION PROPOSED REVISION(S) WITH REASONS ENROLLMENT LAST 5 YEARS
NEW RESOURCES STATEMENT CONSULTATION WITH DEPARTMENT(S) PROVIDED
SYLLABUS (OLD AND NEW)
GEP CATEGORY OBJECTIVES
GEP STUDENT LEARNING OUTCOMES
MEANS OF ASSESSING GEP OUTCOMES
CATALOG DESCRIPTION: (INCLUDE ANY RESTRICTIVE, TRANSPORTATION, OR FEE STATEMENTS) (100 WORD LIMIT) This is Part 1 of 2 for the Senior Capstone Design Course. Students work in cross-functional teams to research and solve real-world problems in fibers, polymers and textile science utilizing their foundation skills in Textile Technology. TT401 and TT402 must be taken in the same academic year as the class is project and team dependent.
SIGNATURE PAGE ATTACHED
29
TT401/ TT402: TT Senior Design I & II
Justification This course is the capstone design course for all concentrations of Textile Technology. It applies
knowledge skills acquired from the classroom to solve real-world issues targeting the fiber,
polymer science, and textile industries. The objectives incorporate responsible design with the
aim of improving the well-being of society through economic development, streamlined
globalization, and commercial viability. Students in the Textile Engineering, Science, and
Chemistry Department are expected to graduate with the skills necessary to conceive, specify,
implement, test, produce, and market complex engineering systems. The capstone senior design
course provides them with the opportunity to creatively synthesize a solution for problems
outside the classroom. They work on teams, study commercialization processes, utilize project
management tools, think globally, determine intellectual property and apply patent mapping
principles. We cooperate with local industries and campus research units to obtain real-life
design projects for the students to analyze, understand the “State of Technology”, and deliver a
working prototype to address the engineering challenge.
This course is a two semester sequence TT401 and TT402. It is necessary to do upfront
research, project concept development, and reiteration of concept design over the academic year.
All other senior capstone design instructors that attempt to complete this in one semester,
typically believe that a two-semester sequence is a more complete experience for the students.
As such, students will be in the design laboratory in both semesters with lectures provided
throughout the year. They will also be work on cross-functional teams that will, at a minimum,
comprise textile engineers but based on the complexity of their project may expand into other
disciplines (both in and outside COT).
Enrollment N/A
New Resources An innovation lab has already been renovated for senior design (RM 1204). The vision of this
lab is to provide the students an environment that enables their success as we launch them into
"the new economy". We are a multi-disciplinary college. People thrive in work spaces that are
conducive to innovation. For example, in TE401/402 (the sister course for TT401/402) the
students have brought in ECE students to their teams, EEP students, and are in the process of
recruiting COT design students. Our company sponsors want to see this collaboration in action.
Having a secure place akin to the IDEO workplace empowers the students to reach their full
potential. As we bring sponsors through the college and recruit new companies, this space will
prove invaluable. The goal is to have cross disciplinary teams consisting of technologists and
engineers. Therefore, the current instructor for TE 401/402 will be teaching TT 401/402 as well.
TT 499 will be dropped from the program as these two classes will be replacing TT 499 which
has been offered every semester. The freeing up of this instructor will facilitate assisting Julie
Willoughby in the combination class.
30
Consultation with Other Departments No duplication or overlap of content was cited in consultation with other departments in the
College of Textiles. This course will be co-taught with TE401/402. The engineers on the teams
will have extra project requirements to satisfy ABET guidelines.
31
Class Meeting Time: Monday, Wednesday: 12:50-2:05 COT Room 2209 Friday: 12:50-2:40 COT Room 2209
Instructors: Dr. Julie Willoughby (3316) jacrowe@ncsu.edu 919-515-1884 Office Hours: MW 11-12 Prerequisites: Senior Standing
Contents Text Suggestions ................................................................................................................................................................................................................................... 1 Catalog Course Description .................................................................................................................................................................................................................. 2 Project Guidelines ................................................................................................................................................................................................................................ 3 Assignment Submission ........................................................................................................................................................................................................................ 4 Grading ................................................................................................................................................................................................................................................. 4 Exams (presentations) .......................................................................................................................................................................................................................... 5 Attendance Policy ................................................................................................................................................................................................................................. 5 Academic Integrity ............................................................................................................................................................................................................................... 5 Students with Disabilities ..................................................................................................................................................................................................................... 6 Lecture Schedule and Deliverables ...................................................................................................................................................................................................... 7 Skill Expectations .................................................................................................................................................................................................................................. 8 TT 401: list of assignments for the Fall Semester ................................................................................................................................................................................. 9
Text Suggestions: Due to the open nature of this course, there is not a required text. Lecture material will be presented and made available weekly. Reading
assignments will be available via moodle site. Recommended Text:
Johnson, Mark A., Seizing the white space: Business Model Innovation For Growth and Renewal available from Amazon Dyer, Jeff, Gregersen, Hal, and Christensen Clayton M., The Innovator’s DNA: Master the Five Skills of Disruptive Innovators available from Amazon Ulrich, Karl T. and Steven D. Eppinger, Product Design and Development, McGraw-Hill, Fourth Edition. Text Web Site: http://www.ulrich-eppinger.net/
32
Catalog Course Description: • The design process including initial specification, design constraints, sources of information, and design strategy. • Development of fact-finding ability in areas unfamiliar to the student. • Analysis of existing designs and the development of improved designs.
TT401/ 402 are the capstone design sequence for the Textile Technology undergraduate curriculum. You are expected to take all the skills acquired from your education and apply them to this course. The course is designed not to have a yes/ no answer. Real-life industrial/ business problems are rarely black and white situations. It is the job of the responsible employee to effectively evaluate a problem and deliver a solution. This course can have a high degree of frustration for the student wanting a closed-end solution. It is the instructor’s goal to prepare you for your next career phase by providing tools and techniques for defining seemingly open-ended problems. By the end of the TT401/ 402 design sequence you will
Learning Outcomes: Students will be able to: 1. Communicate effectively (and concisely) their project problem, objectives, and proposed solutions through written and oral presentations, 2. Work efficiently in teams to deliver high-performing results, 3. Assess the state-of-the-art technology for your given project and be able to translate these skills to any subject matter, 4. Analyze your project and solution from an initial financial, economic, technical, ethical, and commercial perspectives, 5. Protect and develop your ideas with appropriate patent mapping and intellectual property assessment, and 6. Design, develop, and deliver proof of concept(s) for your project sponsor based on analysis. Course Strategy: The course is divided into two parallel activities to achieve the objectives.
1. Lectures and individual assignments will provide new concepts and materials. 2. Design teams will solve a real-world problem.
Team Dynamics: A significant part of this course is team dynamics. Teams must learn to integrate differing styles and opinions into a common strategy/direction shared by all members of the team. There will be ample information provided to support teams throughout the course.
33
Meetings: Teams will be expected to identify a scheduled meeting time for weekly meetings outside the normal class hours. Each team should use conventions that promote successful meetings. Methods for structuring and analyzing information, and decision-making will be discussed throughout the semester. Attendance at team meetings is expected and must be reported. Field Trip(s) and off-campus activities: Students will be expected to participate in various off-campus field trips and activities for successful completion of the project. Project Guidelines: The project is divided into four Phases: Research/Explore Organization Output/Decisions Phase 1. Problem Definition
Understand customer
Collecting information
Identify Customer/product Requirements
Phase 2. Concept Ideation
Identify market Opportunities
Idea Generation Identify Multiple Product Options
Phase 3. Concept Selection
Gather Data Gain Insight
Multiple Data Sets and Perspectives
Select Product Concept
Phase 4. Concept Refinement (mostly TE 402)
Translation Visualization
Testing, Modeling, Economic Analysis
Proving, Selling the Product
Project Evaluation to include (but not limited): • A “living” Google Site per team to have at a minimum weekly entries • Active participation in the entire process • Prepared presentations and posters • Assignments as described on Moodle
34
Assignment Submission Please submit assignments on Moodle (http://moodle.wolfware.ncsu.edu). Each student is asked to keep electronic copies of all work. Unexcused late assignments will not be graded. Any makeup work must be approved by the instructor. Grading:
ITEM % of Your Course Grade Sponsor/ Customer Grade 15 Individual Assessments & Monthly Peer Reviews (Individual Grade)
• 30% Peer Review • 35% Oral Presentation • 35% Exam
25
Safety Training 5 Project Work (Group Grade)
• 20% Google Site • 20% Standalone documents • 20% Final Prospectus • 40% Oral presentations and Design Day Poster
55
GRADING SCALE: The following +/- grading scheme will be employed:
97 ≤ A+ ≤ 100 93 ≤ A < 97 90 ≤ A- < 93 87 ≤ B+ < 90 83 ≤ B < 87 80 ≤ B- < 83 77 ≤ C+ < 80 73 ≤ C < 77 70 ≤ C- < 73 67 ≤ D+ < 70 63 ≤ D < 67 60 ≤ D- < 63 0 ≤ F < 60
35
Exams (presentations): Oral presentations: See Fall 2011 Teaching Schedule on Moodle Individual Exam: See Fall 2011 Teaching Schedule on Moodle Final poster presentation: December 2, 2011 Attendance Policy: In keeping with the NCSU Attendance Regulations students are required to attend all lectures and seminars. . University policies as set forth in the Academic Policies and Regulations (REG02.20.3)1 will be used to determine whether an absence will be considered excused. Only the following reasons will be considered excused: 1) death in the family, 2) personal illness, 3) representing the university at an event, or 4) prior arrangement with the instructor. Attendance in class, at seminars, field trips, design day, and symposiums is mandatory. For each unexcused absence 1/3 letter grade will be deducted from your final course grade. The penalty is severe due to no formal examinations Academic Integrity: Students are expected to follow the University policy on academic integrity as set forth in the Code of Student Conduct (POL11.35.1)2. Dishonesty is unfair to everyone, especially those who do their work honestly. Academic dishonesty will be fully prosecuted and given to the Judicial System, and can result in a failing grade in this course. All work turned in with your name is assumed to be only your own work. Use of Facilities: (a) The Textile Engineering Design Laboratory can be used during posted hours. (b) You are not permitted to work in any non-computer laboratory space alone! Always lock the Lab if you are the last person to leave. (c) Tools are provided and marked. Each team is responsible for replacing any tools lost. A weekly inventory of the tools must be taken. (d) Computers: The Computers in Room 1218 are reserved primarily for CAD users. Do not install any software on the computers. Do not copy
any licensed software. Store all data, reports, and drawings on your personal space or drives. No food or drinks are allowed in the computer lab. The lab is not available for personal use.
Safety: SAFETY IS MOST IMPORTANT! You will be required to complete safety training via TECS safety videos and assessment before working in the lab. (a) Never use tools unless there at least two people in the lab. (b) Safety glasses must be worn in designated areas.
1http://policies.ncsu.edu/regulation/reg-02-20-03 2 http://policies.ncsu.edu/policy/pol-11-35-01
36
(c) Loose clothing, jewelry, ties, and gloves should not be worn when using shop equipment. (d) Long hair should be pulled back and appropriate footwear should be worn. (e) Never use machine shop equipment without proper training and supervision from the machinists. (f) Never work alone in any non-computer laboratory. (g) Report any accidents immediately to staff listed above or Public Safety (515-3333). (h) Safety is mostly common sense. Think before you act, then act safely. Students with Disabilities:
Reasonable accommodations will be made for students with verifiable disabilities. In order to take advantage of available accommodations, student must register with the Disability Services Office (http://www.ncsu.edu/dso), 919-515-7653. For more information on NC State's policy on working with students with disabilities, please see the Academic Accommodations for Students with Disabilities Regulation at http://policies.ncsu.edu/regulation/reg-02-20-01.
Non-Discrimination Policy
NC State University provides equality of opportunity in education and employment for all students and employees. Accordingly, NC State affirms its commitment to maintain a work environment for all employees and an academic environment for all students that is free from all forms of discrimination. Discrimination based on race, color, religion, creed, sex, national origin, age, disability, veteran status, or sexual orientation is a violation of state and federal law and/or NC State University policy and will not be tolerated. Harassment of any person (either in the form of quid pro quo or creation of a hostile environment) based on race, color, religion, creed, sex, national origin, age, disability, veteran status, or sexual orientation also is a violation of state and federal law and/or NC State University policy and will not be tolerated. Retaliation against any person who complains about discrimination is also prohibited. NC State's policies and regulations covering discrimination, harassment, and retaliation may be accessed at http://policies.ncsu.edu/policy/pol-04-25-05 or http://www.ncsu.edu/equal_op/. Any person who feels that he or she has been the subject of prohibited discrimination, harassment, or retaliation should contact the Office for Equal Opportunity (OEO) at 919-515-3148.
37
Lecture Schedule and Deliverables
Class Schedule & Due Dates Deliverables WEEK of MONDAY WEDNESDAY FRIDAY Due Date Item
8/15 Class Organization & Innovation Introduction “IDEO”
No Class 8/19 CATME, Skill Assessment and Interest Survey
8/22 Project Overviews
Teamwork & Google Apps
Project Overviews
THE GARAGE 8/26 Project Selection Survey
8/29 Project team assignments
What is State-of-the-Art?
Lab: Set-up Google site & how-to on searching for state-of-the-art technology
8/30
9/2
Project Agreement Form
Website launched per group
9/5 Labor Day (No Class)
Intellectual Property (OTT)
Patent mapping and non-disclosures
9/12 Identification of Project/ customer Needs
Specifications, Marketing, Pull versus Push, Business Models
Work Session
9/16 Current state-of-technology report
9/19 Defining Customer Needs
State of The Art Feedback
Work Session:
Safety Traing 1 and more feedback
Stream-tools How to write in a team environment
9/26 Value Proposition and Economics
Economic Evaluations cont’d
Work Session:Fire Safety training
9/28 Project Needs and Specifications defined
10/3 Class Presentations 1
Class Presentations 1 Fall Break—no class
10/10 Ideation of Concepts Concept Generations & Pugh Matrix
Work Session: 10/12
10/17 Work Session/ Feedback
Stage Gate Process (Dr. Fred Renk)
Innovation Revisited_Open Innovation (Dr. Fred Renk)
10/19 Concept Descriptions
10/24 Robust Design Robust Design cont’d. Work Session
38
Class Schedule & Due Dates Deliverables WEEK of MONDAY WEDNESDAY FRIDAY Due Date Item
10/31 Delivering Effective Presentations (Oral vs Poster), Stream tools
The Executive Summary
Work Session 11/4 Concept Selection
11/7 Developing a contingency plan
Work Session Work Session 11/7
11/14 Work Session* Class Presentation II Work Session 11/16 Economic Analysis for Selected Concept: Phase 1
11/21 Work Session Thanksgiving Holiday (No Class)
11/28 Wrapping it up Work Session Poster Presentations to College
12/2 Final Reports/ website complete
*may have lecture—to be determined
Skill Expectations (Seek outside tutorial help if needed) • Citation Manager (refworks/ Zotoro workshop) • Literature searching (Web of Science, Summon, Google Scholar, Dewent Patent Index, Textile Technology Index)
39
TT 401: list of assignments for the Fall Semester Group Grades (55% of your course grade)
40
Google Site (20% of group grade): All members of team to be given edit access to website for collaboration and project management. Example site is https://sites.google.com/site/demoncsuteseniordesign/ The components in the demo site are the skeleton requirements needed for your project. These include
• Title of Project • Who is the Customer/ sponsor with contact info • Team members with contact info • Project Definition • Project Boundaries or constraints • Task tracker with to-do list and item ownership; it is essential that you demonstrate each members contributions on the project • Calendar of activities with project milestones. A Gantt chart or excel spreadsheet (Viewpath works nicely) • Project blog and updates • Project files
All the other assignments feed into the Google Site. A well-functioning website will streamline your project. Instructor will be reviewing progress on site weekly. Stand-alone Documents (20% of Group Grade)
• State of Technology: Analysis of state of technology including pertinent engineering principles associated with the project. The state of the technology paper should include jargon, theory, terms, and methods that are pertinent to the understanding of the project scope. It should reference patent literature, open literature (including journals, books, trade magazines, etc.) and web resources. In addition, you should identify other technologies or application areas that you could potentially use as a “benchmark” for your project. A minimum of 30 references should be included in your assessment. The 30 references should comprise of at least 10 technical peer-reviewed journal articles, 5 patents, and 5 business journal articles. This paper should be at least 4000 words, 4 high-quality figures, and 2 tables. Do NOT exceed 15 pages total (11 pt times roman, 1 inch margins)
• Product Needs and Specifications: Format should be a technical sales brochure (at least 1-page long and not longer than 2 pages). Must include success metrics for performance and sponsor (or marketplace) acceptance
• Concept Descriptions: This is your innovation log-book. Concisely describe ideas (1 page per idea with paragraph explanation and sketch). Minimum requirement is three thoroughly described ideas.
• Concept Justification: The work from descriptions, economic analysis, and budgets will feed this work
41
In some cases in order to justify a concept it is obvious that economics and budgets must be carried out. An Economic Analysis for the selected concept is due after the Concept Selection and Justification but it is likely you have them completed in parallel.
Final Prospectus (20% of Group Grade): If you run your project successfully, you will have to only compile the components of above with an intro and conclusion. This document will be refined in TE402 Oral Presentations I and II plus poster (40% of Group Grade/ 20% of Individual Grade)
• Oral Presentation I : Project Scope/ Objective/ Needs, State of the Art • Oral Presentation II: Presentation of Ideas • Poster for Design Day: Your final prospectus in poster format
42
43
44
45
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
1
Class Meeting Time: Monday, Wednesday: 2:55-4:00 COT Room 2208 (1st day of class and when announced otherwise Senior Design Lab) Friday: 9:35-10:50 COT Senior Design Lab
Instructors: Dr. Julie Willoughby (3316) jacrowe@ncsu.edu 919-515-1884
Office Hours: See available appointment times with NCSTATE Google Apps Calendar (Calendar ID: jacrowe@ncsu.edu) or follow this link
Prerequisites: TT 401
Contents
Text Suggestions .................................................................................................................................................. 1 Course Costs: ....................................................................................................................................................... 1 Catalog Course Description ................................................................................................................................. 2 Course Objectives: ................................................................................................ Error! Bookmark not defined. Project Guidelines ................................................................................................................................................ 3 Assignment Submission ....................................................................................................................................... 3 Skill Expectations ................................................................................................................................................. 3 Grading ................................................................................................................................................................ 5 Broader Impact Activity: East Cary Middle School Outreach Activity ................................................................. 5 Attendance Policy ................................................................................................. Error! Bookmark not defined. Academic Integrity ................................................................................................ Error! Bookmark not defined. Students with Disabilities ..................................................................................... Error! Bookmark not defined. Example Lecture Schedule and Deliverables ....................................................................................................... 8
Text Suggestions: Due to the open nature of this course, there is not a required text. Lecture material will be presented and
made available weekly. Reading assignments will be available via moodle site. Johnson, Mark A., Seizing the white space: Business Model Innovation For Growth and Renewal available from
Amazon Dyer, Jeff, Gregersen, Hal, and Christensen Clayton M., The Innovator’s DNA: Master the Five Skills of Disruptive
Innvoators available from Amazon Ullman, David G., The Mechanical Design Process Hoffman, Edward G., Student's Shop Reference Handbook Woodson, Wesley E., Human Factors Design Handbook Ulrich, Karl T. and Steven D. Eppinger, Product Design and Development, McGraw-Hill, Fourth Edition. Text Web Site: http://www.ulrich-eppinger.net/ Course Costs: Only project materials and poster printing costs will be covered by the department. Printing
costs for assignment hardcopies are the responsibility of the student
46
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
2
Catalog Course Description:
The design process including initial specification, design constraints, sources of information, and design strategy.
Development of fact-finding ability in areas unfamiliar to the student.
Analysis of existing designs and the development of improved designs. TT401/ 402 are the capstone design sequence for the Textile Technology curriculum. You are expected to take all the skills acquired from your education and apply them to this course. The course is designed not to have a yes/ no answer. Real-life industrial/ business problems are rarely black and white situations. It is the job of the responsible employee (in your case the student) to effectively evaluate a problem and deliver a solution. This course can have a high degree of frustration for the student wanting a closed-end solution. It is the instructor’s goal to prepare you for your next career phase by providing tools and techniques for defining seemingly open-ended problems. By the end of the TT401/ 402 design sequence you will
Learning Outcomes: Students will be able to: 1. Communicate effectively (and concisely) their project problem, objectives, and proposed solutions through
written and oral presentations, 2. Work efficiently in teams to deliver high-performing results, 3. Assess the state-of-the-art technology for your given project and be able to translate these skills to any
subject matter, 4. Analyze your final project solution from financial, economic, technical, ethical, and commercial
perspectives, 5. Protect and develop your ideas with appropriate patent mapping and intellectual property assessment,
and 6. Design, develop, and deliver proof-of-principles prototype(s) for your project sponsor. Course Strategy: The course is divided into two parallel activities to achieve the objectives.
1. Lectures and individual assignments will provide new concepts and materials. 2. Design teams will solve a real-world problem.
Team Dynamics: A significant part of this course is team dynamics. Teams must learn to integrate differing styles and opinions into a common strategy/direction shared by all members of the team. There will be ample information provided to support teams throughout the course. Meetings: Teams will be expected to identify a scheduled meeting time for weekly meetings outside the normal class hours. Each team should use conventions that promote successful meetings. Methods for structuring and analyzing information and decision-making will be discussed throughout the semester. Attendance at team meetings is expected and must be reported.
47
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
3
Time Commitment Expectations: This class is designed to give flexibility with responsibility to students as they conduct and complete the course objectives. This class is designed to simulate the industrial environment. This is a 3 hour credit course. It is a general expectation of college courses to spend 2-3 hours per credit hour outside of class for results at the A level. In reality, this class should be approached as a “do-whatever-it -takes” to get the job done. Class time is lab-time, attendance will be noted. Written contracts will be handed out for all team members to sign. Each team is to keep a log of their meeting times via a calendar system. Attendance will be taken in class. Due to the nature of project work, you will likely need to be somewhere besides the design lab for your project. It is imperative that you clearly document the activity that kept you out of the lab. Class time and scheduled calendar times give you ample opportunity to work with your professor--make use of it. Last minute cramming of the project will not be tolerated. Field Trip(s) and off-campus activities: Students will be expected to participate in various off-campus field trips and activities for successful completion of the project. Project Guidelines: The TT401/ TT402 is divided into four topics:
Research/Explore Organization Output/Decisions
1. Problem Definition
Understand customer
Collecting information
Identify Customer/product Requirements
2. Concept Ideation Identify market Opportunities
Idea Generation Identify Multiple Product Options
3. Concept Selection
Gather Data Gain Insight
Multiple Data Sets and Perspectives
Select Product Concept
4. Concept Refinement (mostly TE 402)
Translation Visualization
Testing, Modeling, Economic Analysis
Proving, Selling the Product
Project Evaluation to include (but not limited):
A “living” Google Site per team to have at a minimum weekly entries
Active participation in the entire process
Prepared presentations and posters
Assignments as described on Moodle Assignment Submission Please submit assignments on Moodle (http://moodle.wolfware.ncsu.edu). Each student is asked to keep electronic copies of all work. Unexcused late assignments will not be graded. Any makeup work must be approved by the instructor.
Skill Expectations (Seek outside tutorial help if needed):
48
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
4
• Citation Manager (refworks/ Zotoro workshop) • Literature searching (Web of Science, Summon, Google Scholar, Dewent Patent Index, Textile
technology Index
49
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
5
Grading:
ITEM % of Your Course Grade
Sponsor/ Customer Grade 15 Individual Grade (100 points total)
Peer Review (2 CATME Surveys) (40 points)
Participation and Instructor Assessment including (but not limited to) (60 points)
ECMS Broader Impact Activity Participation
Resume/ Business Cards
1-page TT401 Assessment
Google site activity
Seminar Critiques
Class/ Group Participation
Catme participation
20
Broader Impact Activity 5 Project Work (Group Grade—100 points total)
TT401 Report Revamp (15 points)
Google Site (15 points)
Invention Disclosure (10 points)
Progress reports (10 points)
Final Prospectus (20 points)
Prototype Outcome and Design Day Poster (30 points)
60
GRADING SCALE: The following +/- grading scheme will be employed:
97 ≤ A+ ≤ 100
93 ≤ A < 97
90 ≤ A- < 93
87 ≤ B+ < 90
83 ≤ B < 87
80 ≤ B- < 83
77 ≤ C+ < 80
73 ≤ C < 77
70 ≤ C- < 73
67 ≤ D+ < 70
63 ≤ D < 67
60 ≤ D- < 63
0 ≤ F < 60
Broader Impact Activity: East Cary Middle School Outreach Activity It is imperative for our nation’s economy and global security that we train the next generation of STEM professionals. Each team has been scheduled for presenting their project with a related activity for the ESL (English as a second language) student club at East Cary Middle School. This is MANDATORY and reflects both in your individual grade and overall grade.
50
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
6
Exam Schedule: Final poster presentation is the final requirement for TT402. You will be officially done with senior design after this date! Mandatory Attendance: If you have a class conflict that will not be allowed by the professor to miss please inform Prof. Willoughby by Jan 20th. No Exceptions Attendance Policy: In keeping with the NCSU Attendance Regulations students are required to attend all lectures and seminars. . University policies as set forth in the Academic Policies and Regulations (REG02.20.3)
1 will be used to
determine whether an absence will be considered excused. Only the following reasons will be considered excused: 1) death in the family, 2) personal illness, 3) representing the university at an event, or 4) prior arrangement with the instructor. Attendance in class, at seminars, field trips, design day, and symposiums is mandatory. For each unexcused absence 1/3 letter grade will be deducted from your final course grade. The penalty is severe due to no formal examinations Academic Integrity: Students are expected to follow the University policy on academic integrity as set forth in the Code of Student
Conduct (POL11.35.1)2. Dishonesty is unfair to everyone, especially those who do their work honestly.
Academic dishonesty will be fully prosecuted and given to the Judicial System, and can result in a failing grade
in this course. All work turned in with your name is assumed to be only your own work.
Use of Facilities: (a) The Textile Technology Design Laboratory can be used during posted hours. (b) You are not permitted to work in any non-computer laboratory space alone! Always lock the Lab if you are
the last person to leave. (c) Tools are provided and marked. Each team is responsible for replacing any tools lost. A weekly inventory
of the tools must be taken. (d) Computers: The Computers in Room 1218 are reserved primarily for CAD users. Do not install any
software on the computers. Do not copy any licensed software. Store all data, reports, and drawings on your personal space or drives. No food or drinks are allowed in the computer lab. The lab is not available for personal use.
Safety: SAFETY IS MOST IMPORTANT! You will be required to complete safety training via TECS safety videos and assessment before working in the lab in TT 401. (a) Never use tools unless there at least two people in the lab. (b) Safety glasses must be worn in designated areas. (c) Loose clothing, jewelry, ties, and gloves should not be worn when using shop equipment. (d) Long hair should be pulled back and appropriate footwear should be worn. (e) Never use machine shop equipment without proper training and supervision from the machinists. (f) Never work alone in any non-computer laboratory. (g) Report any accidents immediately to staff listed above or Public Safety (515-3333). (h) Safety is mostly common sense. Think before you act, then act safely.
1http://policies.ncsu.edu/regulation/reg-02-20-03
2 http://policies.ncsu.edu/policy/pol-11-35-01
51
Spring Syllabus TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
7
Students with Disabilities:
Reasonable accommodations will be made for students with verifiable disabilities. In order to take advantage of
available accommodations, student must register with the Disability Services Office (http://www.ncsu.edu/dso),
919-515-7653. For more information on NC State's policy on working with students with disabilities, please see
the Academic Accommodations for Students with Disabilities Regulation at
http://policies.ncsu.edu/regulation/reg-02-20-01.
Non-Discrimination Policy NC State University provides equality of opportunity in education and employment for all students and
employees. Accordingly, NC State affirms its commitment to maintain a work environment for all employees
and an academic environment for all students that is free from all forms of discrimination. Discrimination based
on race, color, religion, creed, sex, national origin, age, disability, veteran status, or sexual orientation is a
violation of state and federal law and/or NC State University policy and will not be tolerated. Harassment of
any person (either in the form of quid pro quo or creation of a hostile environment) based on race, color,
religion, creed, sex, national origin, age, disability, veteran status, or sexual orientation also is a violation of
state and federal law and/or NC State University policy and will not be tolerated. Retaliation against any person
who complains about discrimination is also prohibited. NC State's policies and regulations covering
discrimination, harassment, and retaliation may be accessed at http://policies.ncsu.edu/policy/pol-04-25-05 or
http://www.ncsu.edu/equal_op/. Any person who feels that he or she has been the subject of prohibited
discrimination, harassment, or retaliation should contact the Office for Equal Opportunity (OEO) at 919-515-
3148
52
Spring Class Schedule TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
8
Proposed Class Meeting Time: Monday, Wednesday: 2:55-4:00 COT Room 2208 (1st day of class and when announced otherwise Senior Design Lab) Friday: 9:35-10:50 COT Senior Design Lab
Example Lecture Schedule and Deliverables
Class Schedule & Due Dates (subject to change) Deliverables
WEEK of MONDAY WEDNESDAY FRIDAY Due Date Item
1/09 Course overview and Ethics Video
Meet in 1204 Engineering & Design Lab
Last day to add a course
1/13 1-page individual document on TT401 Assessment
1/16 MLK Holiday No Class
1/20 Revamped reports from TT401
1/23 Last day to drop a course
1/25 Resume and business cards due
1/30 Willoughby in Turkey—independent work
Willoughby in Turkey—independent work
2/06 ECMS: Acute Wound Care Team
3 pm Seminar The New Economy and the Impact of Education and Socio-Demographics (John Bardo (Chancellor Emeritus of Western Carolina University) (Convocation Room)
2/6 Progress Report 1
2/13 ECMS: Vans Team
3 pm Seminar COT 2207 Textile Innovation at Milliken and Company Shulong Li (Milliken)
2/20 ECMS: Bennett Aerospace Team 2/20 Progress Report 2
2/27 ECMS: VSX Team
3/5 SPRING BREAK
3/12 ECMS: Bottle Team 3/14 Progress Report 3
53
Spring Class Schedule TT 402 TEXTILE TECHNOLOGY SENIOR DESIGN
9
Class Schedule & Due Dates (subject to change) Deliverables
WEEK of MONDAY WEDNESDAY FRIDAY Due Date Item
3/19
3/26 ECMS: Windlift Team 3/26 Progress Report 4
4/02 ECMS: EEP Team No Class 4/4 Poster Draft Due (11 X17 printout)
4/09 Poster Draft Feedback
3 pm Seminar 2207 COT on 4/11 “Engineering Nonwoven Surfaces from Responsive Systems to Renewable Resources” Julie A. Willoughby, PhD
Critique on 4/11 Seminar
4/16 4/20 Final Prospectus
4/23 APRIL 26th THURSDAY MCKINNON CENTER 11am- 4pm Engineers& Entrepreneurs Symposium Day Poster Presentations and prototype display (40ft of parking space available for Windlift) Mandatory Attendance: If you have a class conflict that will not be allowed by the professor to miss please inform Prof. Willoughby by Jan 20, 2012
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
top related