news letter spe japan section...3 hiroshi ikeda furukawa electric co., 4 shinichi izawa 5 youichi...
Post on 07-Jul-2020
3 Views
Preview:
TRANSCRIPT
ASIATEC2011 Organizing Committee was held over eight times for ASIATEC 2011of preparations in 2010, and the steering committee carried it out in that time.In addition, the seminor of April 11 was postponed by East Japan great earthquake disaster.A contribution was sent to the Japanese Red Cross Society from Mizuho Bank, ordinary account 2188729 to the victim of the East Japan
earthquake disaster mentioned above as SPE Japan Section.It is given to people suffered from by East Japan great
earthquake disaster heartily.
2011 NEWSLETTER SPE JAPAN SECTION
Summer 2011
The main events of 2010 was as follows:ASIATEC2011 was opened on 15,16 February, 2011.The board of director of July 16, 2010, the member general meeting of August 10, 2010, the next year event committee meeting June 16, 2011 were performed in the management of the Japan Section. The steering committee opened eight times with ASIATEC2011 Organizing Committee simultaneously.The regular seminor carried out four times:①ANTEC2010 introduction seminar (plan by Ito) of
ASIATEC2011 Kagami biraki
August 10, 2010.②In the present & the future of the non-petroleum plastics (plan by Nagata) of October 13, 2010. ③The second energy connection plastic material seminar (plan of Baba) of December 10, 2010. ④Plastics for the fourth electronic equipment (plan of Ogiwara) of June 17, 2011.
Mr.Russell Broome of President Elect was reached from the headquarters and held ASIATEC2011 as an international conference on 15,16 February, 2011. The participation number of people was approximately 110 people, (any place other than Japan S.Korea, China, USA, Germany, Thailand, Canada, France, Turky,SaudiArabia,Hongkong,Taiwan).
The settlement of accounts of 2010 was the black of about 710,000 yen including the settlement of accounts of ASIATEC2011. Oida changed the officer of 2011 to Kitano (Treasurer), and Tashiro changed to Kim (Secretary), Inoue were retired. Tashiro is in charge of News Letter Editor with a Web editor sequentially. Kutsuru participated in the Steering committee.Seven times of seminor is planned in 2011.
CONTENT1,2010 OUTLOOK2,Section Chair Greeting Board of Director3,Regular Seminor 4,Membership,Finacial report5, ASIATEC 20116, Steering committee
NEWS LETTER SPE Japan section
Publisher:SPEJapan Section Plastics Age INC. Okouchi Build.5Fl. Kajicho1-10-6,Chiyodaku, Tokyo
The board of directors
General meeting 2010ANTEC introduction seminor
Third Organizing CommitteeBioplastics
Procedural Committee / Organizing Committee
The second energy plastic materialProcedural Committee /
Organizing CommitteeASIATEC2011
postponementNext fiscal year event Committee
Appliance seminar
July 16, 2010
August 10, 2010
August 30, 2010October 13, 2010
Nov.10, 2010
Dec. 10, 2010Dec.13, 2011
Feb., 2011 15-16
April 11, 2011June 17, 2011
Main Events 2010
SPEJapan section Summer 2011
2011 Board of Director SPE Japan section
Kim Baba Katsura KitanoNagaoka Asayama Izawa Tashiro
Without getting a wrong course of the next step Shinichi Izawa
We could finish the big event ,Asiatec2011 successfully with cooperation of members. The international conference of 110 participation including 40 from the foreign countries was thought one proof that plastic in Asia had been watched by with interest. Over all of production, processing, consumption in the plastic industry continue to transfers from the developed country to the developing country around Asia. It may be said that there is the Japanese plastics industry in the suitable geographical convenience in such a trend. A foreseeable manager can watch in the developing country which the consumption enlarges if this changes a viewpoint. And he accelerate an advance to there. A lot of politician and industrialists which have been addicted to protection of the vested interest in Japan. I have felt the sign that they miss Asia shift of Japan heavily. It is clear that both of those results bring domestic hollowing out. We fix our eyes on a world tide from the raw materials into a market at the whole world like to this in a change,The technology of the battery is raising a position not only electricity and electronic field., but also energy, car, house, the center of the very large sector development including aquatic resources. The function of position of plastics have been waited for insulating materiala, high-performance film, including the extra-precision molding in addition to the further break through in the field of the supremeness. In industry to advance of the hollowing out of Japan, the technology of the battery is big technology area to continues staying. The result is expected as not only the developed country but also contribution to the human of the whole world to continue population expansion. The quantitative expansion will continue mainly on security of food and the water in the world plastics industry, We,the plastic engineer of SPE Japan Section gueses the end of the technical flow well. And all energy has wanted to be concentrated on running in the top.
1) It is April Issue, 147-152 pages in a report for Plastics age, 2,011 years.
2011201120112011role name org *1
President Shinichi Izawa TIT ○President Elect Motohiro Asayama Plastics-Age ○Council Hiroshi Itou Yamagata University ○Treasure Ryuichirou Kitano Sumitomo Bakelite Co.,Ltd. ○Membership Manabu Ogiwara Nippon Zeon Co., ○Secrtary YoonHoon Kim Furukawa Electric Co.,Ltd. ○WebNL Masahide Tashiro MSAI ○
planning (Hiroshi Itou) Yamagata Universityplanning Kazuya Nagata Asahi Kasei Chemicals Co.,Ltd.○planning Fumiaki Baba Mitsubishi Electric CorporationMitsubishi Electric Corporationplanning Takeshi Nagaoka Kobe Steel Ltd. ○planning (Manabu Ogiwara) Nippon Zeon Co.,planning (Masahide Tashiro) MSAI
Director Yoshiyuki Suetsugu Idemitsu Industrial Co.,Ltd.Idemitsu Industrial Co.,Ltd.Director Tadahiko Katsura Hoso Kagaku Kenkyusho ○Director Kiyotaka Tomari Osaka Municipal Tech. Res. Inst.Osaka Municipal Tech. Res. Inst.
role name Org. *1Auditor Kazuhiko.Ogino Ogino Engineering OfficeOgino Engineering OfficeAuditor Toshihiko Harada Pla Techno Research
ADVISER N.TAKASHIMA (Past President 76~80)ADVISER S.NAGAI (Past President 87~88)
*1:Steering committee
SPEJapan section Summer 2011
2010 Regular meeting SPE Japan Section
If ASIATEC2011 was excluded, the regular meeting was able to carry out only four times of events.The Nano/SPE Joint seminar of February was the adjournment due to Asiatec2011.and the plastics for car seminar of April was postponed due to an earthquake disaster.As a result, except 110 people of Asiatec2011, the total participant was 123 people in 2010.ANTEC2010 introduction seminar in August 2010,the present and the future of the non-petroleum plastics in October,the second energy connection plastics material seminar in December,The 4th Plastics for appliance in June,2011.
2010.08.10 ANTEC2010 Introduction
Reports on outlines for Nano/Micro Molding SIG, Extrusion DIV, and Joining of Plastics and Composites SIG
Miyata of Yamagata University
Yamagata University
2010.08.10 ANTEC2010 Introduction
Composites, Engineering Properties & Structure, and Polymer Analysis
Mr.Kotaki of Kyoto Institute of Technology
Kyoto Institute of Technology
2010.08.10 ANTEC2010 Introduction
ANTEC2010 Report including Injection,Thermoplastics, Foam .
Mr.Hiroshi Itoh of Yamagata University
Yanagata University
2010.10.13 The Future of Plastics made from non-petroleum materials
Trend on Development of PLA. Mr.Katsuhiko Hironaka
Teijin Co.Ltd.2010.10.13 The Future of Plastics made from non-petroleum materials
DuPont's approach and current status for Nonpetroleum-based material
Mr.Hiroyuki Sumi Dupont Japan Co Ltd.,
2010.10.13 The Future of Plastics made from non-petroleum materials
Bio-based polyurethane (summary and characteristics)
Yasuhiro Matsuzaka Mitsu Chemical Co. Ltd.2010.12.10 2nd. Plastics
materials for Energy
Nanofiber nonwoven Yoshinori Kishimoto Hirose Paper Mfg Co.,Ltd.
2010.12.10 2nd. Plastics materials for Energy Molecular designed Organic Inorganic
Hybrid materials and their applications.Hideki Goda Arakawa
Chemical Industries, Ltd.
2010.12.10 2nd. Plastics materials for Energy
Polyurethane rigid foam in the field of renewable energy.
Masayuki Fujidai Sumika Bayer Urethane Co., Ltd.pressu
2010.12.10 2nd. Plastics materials for Energy
PV cell encapselant of EVA Masashi Segawa SANBIC2011.02.15 ASIATEC 20112011.04.11 4th,Composites for
auto postpone2011.06.172011.06.17
4th.Plastics for appliance
Introduction of the resin for LED illumination
Kazuhiro Okuyama Idemitsu Kosan Co., Ltd.
2011.06.172011.06.17
4th.Plastics for appliance
Developed Innovative LCP Resins Applied into LED Usages.
Dr. Satoshi Okamoto Sumitomo Chemical Company, Limited
SPEJapan section Summer 2011
2010 Membership list of SPE Japan Section 2010 Financial report (¥)
Editor’s Script
Tokyo Big Site was wrapped by pure white snow on the morning of February 15, 2011 .However, the attendants increased smoothly, and the conference of 2 days was success. We were hitted by East Japan earthquake disaster at past 3:00 on the afternoon of March 11 not to awake from the lingering sound.We suffered with an earthquake, a tsunami and a radioactivity leak of the Fukushima Nuclear Power Plant.
After the success of ASIATEC2011, The SPE Japan Section, as a whole, became younger and were able to invite 2011 of the year in the new threshold.
2011/2 HQ=14959, Japan=105
InputInput OutputOutputsubject ¥ subject ¥
Member fee for HQ 30,000 Member fee for HQ 178,795Member fee for Section 390,000 Member fee for Section12316Member fee for Section 10478,380ember fee for Section 72,220Rebate 31,175 Rebate Exchange 5,000Meeting Fee 462,000 Meeting expense 393,410ASIATEC 3,787,000 ASIATEC 3,580,123Magazine & Materials 0 Magazine & Materials 0Interesting 803 Communication 0
Advertisement 263,000materials 700office 1805miscellaneous 103,045
Total 5,251,578 Total 4,538,194Revenue at June 31,2010713,384
Previous Term 571,105 The next Term 1,284,489
No Name Company1 Motohiro Asayama Plastics Age Co.,2 Toru Arai Denki Kagaku Kogyou Co.,3 Hiroshi Ikeda Furukawa Electric Co.,4 Shinichi Izawa5 Youichi Ishizaki Toyo Seikann Co.,Ltd.6 Shinji Ishida Seikisui Chemical Co.,ltd.7 Jyunya Ishibashi Yamagata University8 Hiroshi Itoh Yamagata University9 Takashi Inoue Yamagata University
10 Masao Iwano PTBDL11 Ryuichirou Kitano Sumitomo Bakelite Co.,Ltd.12 Kazuhiko Ogino Ogino Engineer Office13 Manabu Ogiwara Nippon Zeon Co.,14 Tadahiko Katsura Hoso Kagaku Kenkyusho15 Kiyoo Kato Asahi Chemical Co.,16 Toshitaka Kanai Idemitsu Kosan Co.,17 Masaya Kurokawa Starlite Co.,18 Tadamoto Sakai Shizuoka University19 Masaaki Sasaki Sekisui Plastics Co.,20 Kenichi Shinohara Depont Co.,Ltd.21 Yoshiyuki Suetsugu Idemitsu Kosan Co.,Ltd.22 Masao Sumita Tokyo Institute of Technology23 Naoichi Takashima Takashima Engineer office24 Yuji Takeda Mitsubishi Gas Chemical Co.,Ltd.25 Masahide Tashiro MSAI26 Nobuyuki Tsujiwaki Sekisui Plastics Co.,27 Shigeo Tsuyama JAICI28 Kiyotaka Tomari Osaka Municipal Tech. Res. Inst.29 Ritsuji Toyotate Nippon A & L INC.30 Susumu Nagai Techno Search31 KTakeshi Nagaoka KOBELCO Co.,32 Kazuya Nagata Asahi Chemical Co.,33 Keiichi Nosaka Daiei Co.,34 Fumiaki Baba Mitsubishi Electric Co.,35 Toshihiko Harada Starlite Co.,36 Mikio Fukumura37 Yuuzou Furukawa Sekisui Kouki Co.,Ltd.38 YoonHoon Kim Furukawa Electric Co.,Ltd.39 Takahisa Oida Sumitomo Bakelite Co.,
SPEJapan section Summer 2011
Country Area
Company University Total
JapanSouth KoraChinaUSAGermanyThailandCanadaFranceMiddle East(Turky, Saudi Arabia)ASia(Hongkong,Taiwan,India)
Total
61 9 704 10 145 1 63 3 64 42 2
1 11 1
each,1 2
each,1 4
86 24 110
Session JapanJapan foreign Total
Plenary lecture 44 1 5
Plastics industry in Asian countries 11 4 5
offered Posting offered
New development of ploymer processing3 5 5 13
Properties & structure 2 6 8
Advanced materials 4 3 4 11
Plastics for Automotive 2 1 1 4
Total 2525 21 46
SUMITOMO BAKELITE Company LimitedMitsui Chemicals Inc.,NPO Research Association of Nano Structure PolymerShowa Denko Kabushiki KaishaTeijin Chemical Company LimitedSteer Japan Company LimitedZeon CorporationPolyplastics Company LimitedHitachi Chemical Company LimitedToyoSeiki Company LimitedFujifilm company LimitedToshiba Machine Company LimitedTeijin LimitedBridgestone Company LimitedSABIC Japan Company LimitedToray Industries Inc.,Sumitomo Technical Information Service Inc.Sumitomo Chemical Company LimitedSekisui Chemical Company Limited
The following show supporter list of ASIATEC2011:
The following show participant by country ASIATEC2011:
The following show reports of ASIATEC2011:
SPEJapan section Summer 2011
ASIATEC2011Organization committee
ASIATEC2011 Thank you
letter
The following shows Organization committee of ASIATEC2011:
Organizing committee and donation Committee of ASIATEC2011 were almost held every month from July, 2010 to February, 2011 and carried out preparations of ASIATEC2011 and preparations for regular seminar.We prepared the subscription for donations, preparation of call for paper, program, cataloging of the Japan Section, USB preparation for documents, name tag, documents.In this conference, labor saving was planned in intelligence (a lecturer, a participant) overall by Internet.
2011/02/07 9th.ASIATEC2011Organization Committee2011/01/19 8th.ASIATEC2011Organization Committee2010/12/13 7th.ASIATEC2011Organization Committee2010/11/10 6th.ASIATEC2011Organization Committee2010/10/04 5th.ASIATEC2011Organization Committee2010/08/30 4th.ASIATEC2011Organization Committee2010/07/27 3th.ASIATEC2011Organization Committee2010/07/01 2th.ASIATEC2011Organization Committee
top related