national electric gate product · pdf filepart no. * size awg stranding cond. dia (inch)...
Post on 15-Mar-2018
225 Views
Preview:
TRANSCRIPT
National Electric Gate Product Catalog
TABLE OF CONTENTS
GATE ARMS Fiberglass Extendable Roadway Arm ...................................................................................................................................... 4 Alumi-Glass Extendable Roadway Arm ....................................................................................................................................5 High Wind Profile Gate Arm ........................................................................................................................................................ 6 Individual Sections - Hi Intensity Vertical Striping ................................................................................................................8 Articulated Gate Arms .................................................................................................................................................................. 9 Articulated Gate Arm Stangent & Off Stangent .................................................................................................................... 11 Flex Tip Sections ............................................................................................................................................................................ 12 Buffer Leg ........................................................................................................................................................................................ 13
BREAKAWAY CONVERSION Gate-Saver - One way .................................................................................................................................................................. 14 Gate-Saver - Two way .................................................................................................................................................................. 15 Conversion Brackets & Assemblies (Mast-Mounted Gates) .............................................................................................. 16
GATE LAMPS Gate Lamps ..................................................................................................................................................................................... 17 New NEG Light Set........................................................................................................................................................................ 18 Reverse Diode Gate Light Kit ..................................................................................................................................................... 19 LED Gate Arm Light Set .............................................................................................................................................................20
HIGH WIND BRACKETS High Wind Brackets and Mast Extensions .............................................................................................................................. 21
MISCELLANEOUS Electronic Crossing Bell .............................................................................................................................................................. 22 Signage ............................................................................................................................................................................................ 23 M22759 - Tefcel Case Wire......................................................................................................................................................... 24 RR1 Bond Strand Bare & Insulated .......................................................................................................................................... 25 Insulated Test Links and Terminals / Terminal & Bus Connectors .................................................................................. 26 Replacement Gate Tape .............................................................................................................................................................. 27
ABOUT US ................................................................................................................................................................................... 28
CONTACT US ............................................................................................................................................................................. 29
NOTES............................................................................................................................................................................................30
4
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
5
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
Fiberglass Gate Arms 8' to 48'Sidewalk Gates Available
Item Number Description NEG Number
Complete Gate (Length range: 8’-40’) NEG-8001-#
1 Fiberglass 1st section (Length range: 8', 16', 21', 24') NEG-501-#
2 Fiberglass 2nd section (Length range: 4'-16') NEG-502-#
3 Fiberglass 3rd section (Length range: 4'-16') NEG-503-#
4 Base Section Hardware Please Call
5 2nd Section Hardware Please Call
6 3rd Section Hardware Please Call
Insert desired length where the “#” appears in the above part numbers.
Alumi-Glass Gate Arms 8' to 48' (Call for Specific Lengths)Sidewalk Gates Available
Item Number Description NEG Number
Complete Gate Arm NEG-8003-#
1 Aluminum 1st Section (Length range: 8', 16', 21', 24') NEG-2120-#
2 Fiberglass 2nd Section (Length range: 4'-21') NEG-502-#
3 Fiberglass 3rd Section (Length range: 4'-16') NEG-503-#
4 Base Section Hardware Please Call
5 2nd Section Hardware Please Call
6 3rd Section Hardware Please Call
Insert desired length where the “#” appears in the above part numbers.
FIBERGLASS EXTENDABLE ROADWAY ARM
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
ALUMI-GLASS EXTENDABLE ROADWAY ARM
6
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
7
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
Detail on Reflective Pattern
E5Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Insulated Test Links and Terminals / Terminal and Bus Connectors
National Electric Gate Testing Links are utilized for applications to any two post terminal where open or closed circuit tests are needed. The Central Insulated Test Link and Insulated Test Terminals allows open and closed circuit tests to
be made without disturbing connections on either side of the circuit and also provides a convenient means to open and close a circuit for test purposes.
Ordering Information
National Electric Gate Terminal and Bus Connectors are of bright nickel plated copper and are available in a variety of lengths with mounting centers ranging from 1” to 2-3/8”.
Insulated Test Links & Terminals
Terminal & Bus Connectors
4
2
1
3 5 67
Item Part No. Description
1 TW-IM Wrench Terminal Wrench
2 NEG-1SL-1 Offset Insulated Link with Special Nut & Clamp Nut - 1” Centers
3 NEG-1351 Center Control Insulated Test Link - 2 3/8” Mounting Center
4 NEG-872231 Buss Connector (AAR#10763) - 1 1/2” Centers
5 NEG-982238 Buss Connector (AAR#10764) - 2 3/8” Centers
6 NEG-982230 Buss Connector (AAR#10766) - 1” Centers
E4 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
RR1 Bond Strand Bare & Insulated
Applications
For use in low voltage track circuit applications, NECCO Bond Strand is available both bare and insulated.
Construction
A single, tinned over bare cadmiumbronze conductor (7 x 19 concentric strands, each 0.0132 inch) with an overall circular mil area of 22,173 can be insulated with either polyvinyl chloride (PVC) or rubber/neoprene.
Advantages
An extremely flexible, yet rugged cable, our Bond Strand is clean stripping, and the specially tempered cadmium bronze hold its shape while being terminated.
Ordering Information
Part No. * Size AWG StrandingCond. Dia
(Inch)Insul. Thick
(Inch)Insul.
Material
Approx O.D.(Inch)
Approx. Net. Wt.
(Lbs./MFT.)
NEG-2045C 6 133 .200 Bare - .200 78
NEG-133564P 6 133 .200 .062 PVC .325 124
NEG-133B464PO
6 133 .200 .062 PVC .325 124
NEG-133464P 6 133 .200 .062 PVC .325 124
NEG-133664P 6 133 .200 .094.078
PVCRubber
.390 147
NEG-2048C 6 133 .200 and.062 Neoprene
.480 168
A4Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Aluminum/Fiberglass
Detail on Reflective Pattern
High Wind Profile Aluminum/Fiberglass Gate Arms
Alumi-Glass 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-1WC3130
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502C
3 Fiberglass 3rd Section NEG-1WC503B
HIGH WIND PROFILE GATE ARM
E3Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Insulation - ETFE (Extruded)
ETFE - Ethylene-Tetrafluoroethylebe Coparlymer
“Small Diameter”Tin-Coated Stranded Copper Conductor
Military Specifications
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of Specification MIL-W-22759.
Construction Details (Table 1)
* Part No.: The astrisks in the part number column, Tables I & II, shall be replaced by color code designators in accordance with MIL-STD-681. Exam-ples: Size 20, White - M22759/16-20-9; White with Orange Stripe - M22759/16-20-93
1/ : Also for bend tests after immersioin. 2/ : Use mandrel for wire size 2 and larger in “wrap back” test.
Bend Test Mandrels and Test Loads (Table II)
Diameter of StrandedConductors (inches) Finished Wire
Part No. * Wire Size
Stranding (Number of
Strands) x AWG Gage of Strands Min. Max
Resistance at 20°C (68°F)
(ohms/1000 ft.) Max
Diamter(Inches)
Weight(lbs./1000 ft.)
Max
M22759/16-20-* 20 19 x 32 .037 .039 9.88 .060 ± .002 5.36
M22759/16-18-* 18 19 x 30 .046 .049 6.23 .071 ± .002 7.89
M22759/16-16-* 16 19 x 29 .052 .055 4.81 .078 ± .002 9.95
M22759/16-14-* 14 19 x 27 .065 .069 3.06 .093 ± .002 14.9
M22759/16-12-* 12 37 x 28 .084 .089 2.02 .114 ± .003 22.6
M22759/16-10-* 10 37 x 26 .106 .112 1.26 .139 ± .003 35.1
M22759/16-8-* 8 133 x 29 .158 .169 .701 .199 ± .003 63.5
M22759/16-6-* 6 133 x 27 .198 .212 .445 .250 ± .003 99.9
M22759/16-4-* 4 133 x 25 .250 .268 .280 .312 ± .004 157.0
Mandrel Diameter (Inches) (±3%) Test Load (lbs.) (± 3%)
Part No. *
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
Wrap Test 2/
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
M22759/16-20-* .75 1.00 - 2.0 4.0
M22759/16-18-* 1.00 1.25 - 2.0 4.0
M22759/16-16-* 1.00 1.25 - 3.0 5.0
M22759/16-14-* 1.25 2.00 - 2.0 5.0
M22759/16-12-* 2.00 2.00 - 2.0 5.0
M22759/16-10-* 3.00 3.00 - 2.0 5.0
M22759/16-8-* 3.00 4.00 - 3.0 6.0
M22759/16-6-* 4.00 5.00 - 3.0 10.0
M22759/16-4-* 5.00 6.00 - 3.0 10.0
M22759/16-2-* 6.00 8.00 1.25 4.0 15.0
M22759
E2 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
T R A C K S3
These are some of our railroad crossing signs available. Please contact our sales people for further details and part identification numbers for ordering information.
Signage
A6Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 42’ to 46’ Description NEG Number
1 Aluminum Base Section NEG-3130-21
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Alumi-Glass 47’ to 52’ Description NEG Number
1 Aluminum Base Section NEG-3130-24
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Detail on Reflective Pattern
A5 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-3130-8
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503B
E3Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Insulation - ETFE (Extruded)
ETFE - Ethylene-Tetrafluoroethylebe Coparlymer
“Small Diameter”Tin-Coated Stranded Copper Conductor
Military Specifications
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of Specification MIL-W-22759.
Construction Details (Table 1)
* Part No.: The astrisks in the part number column, Tables I & II, shall be replaced by color code designators in accordance with MIL-STD-681. Exam-ples: Size 20, White - M22759/16-20-9; White with Orange Stripe - M22759/16-20-93
1/ : Also for bend tests after immersioin. 2/ : Use mandrel for wire size 2 and larger in “wrap back” test.
Bend Test Mandrels and Test Loads (Table II)
Diameter of StrandedConductors (inches) Finished Wire
Part No. * Wire Size
Stranding (Number of
Strands) x AWG Gage of Strands Min. Max
Resistance at 20°C (68°F)
(ohms/1000 ft.) Max
Diamter(Inches)
Weight(lbs./1000 ft.)
Max
M22759/16-20-* 20 19 x 32 .037 .039 9.88 .060 ± .002 5.36
M22759/16-18-* 18 19 x 30 .046 .049 6.23 .071 ± .002 7.89
M22759/16-16-* 16 19 x 29 .052 .055 4.81 .078 ± .002 9.95
M22759/16-14-* 14 19 x 27 .065 .069 3.06 .093 ± .002 14.9
M22759/16-12-* 12 37 x 28 .084 .089 2.02 .114 ± .003 22.6
M22759/16-10-* 10 37 x 26 .106 .112 1.26 .139 ± .003 35.1
M22759/16-8-* 8 133 x 29 .158 .169 .701 .199 ± .003 63.5
M22759/16-6-* 6 133 x 27 .198 .212 .445 .250 ± .003 99.9
M22759/16-4-* 4 133 x 25 .250 .268 .280 .312 ± .004 157.0
Mandrel Diameter (Inches) (±3%) Test Load (lbs.) (± 3%)
Part No. *
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
Wrap Test 2/
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
M22759/16-20-* .75 1.00 - 2.0 4.0
M22759/16-18-* 1.00 1.25 - 2.0 4.0
M22759/16-16-* 1.00 1.25 - 3.0 5.0
M22759/16-14-* 1.25 2.00 - 2.0 5.0
M22759/16-12-* 2.00 2.00 - 2.0 5.0
M22759/16-10-* 3.00 3.00 - 2.0 5.0
M22759/16-8-* 3.00 4.00 - 3.0 6.0
M22759/16-6-* 4.00 5.00 - 3.0 10.0
M22759/16-4-* 5.00 6.00 - 3.0 10.0
M22759/16-2-* 6.00 8.00 1.25 4.0 15.0
M22759
E2 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
T R A C K S3
These are some of our railroad crossing signs available. Please contact our sales people for further details and part identification numbers for ordering information.
Signage
Detail on Reflective Pattern
ALUMI-LITE HIGH WIND PROFILE GATE - utilizes aluminum for every section of the gate
Length Range Description NEG Number
8' – 40' Alumi-Lite High Wind Profile Gate NEG-8007A-#
8', 16', 2', 24' High Wind Profile Aluminum 1st Section NEG-3130-#
4' – 16' High Wind Profile Aluminum 2nd Section NEG-1WCA502-#
4' – 16' High Wind Profile Aluminum 3rd Section NEG-1WCA503-#
ALUMI-GLASS HIGH WIND PROFILE GATE - utilizes an aluminum 1st section, a fiberglass 2nd section, and a fiberglass 3rd section
Length Range Description NEG Number
8' – 40' Alumi-Glass High Wind Profile Gate NEG-8007-#
8', 16', 21', 24' High Wind Profile Aluminum 1st Section NEG-3130-#
4' – 16' Fiberglass High Wind Profile Aluminum
2nd Section NEG-1WC502-#
4' – 16' Fiberglass High Wind Profile Aluminum
3rd Section NEG-1WC503-#
FIBERGLASS HIGH WIND PROFILE GATE - utilizes fiberglass for all sections of the gate
Length Range Description NEG Number
8' – 40' Fiberglass High Wind Profile Gate NEG-8005-#
8', 16', 21', 24' Fiberglass High Wind Profile 1st Section NEG-1WC501-#
4' – 16' Fiberglass High Wind Profile 2nd Section NEG-1WC502-#
4' – 16' Fiberglass High Wind Profile 3rd Section NEG-1WC503-#
Insert desired length where the “#” appears in the above part numbers.
Our High Wind Profile Gates are designed to withstand higher wind speeds than other gates we offer. The inner strength member allows for the gate to withstand impact; and the “step” design significantly decreases the sur-face area of each section allowing more tolerance for high wind speeds. All of our High Wind Profile Gates can be ordered in any length ranging from 8’ to 40’.
• Our Alumi-Lite High Wind Profile Gate utilizes aluminum for every section of the gate.
• Our Alumi-Glass High Wind Profile Gate utilizes an aluminum 1st section, a fiberglass 2nd section, and a fiberglass 3rd section.
• Our Fiberglass High Wind Profile Gate utilizes fiberglass for all sections of the gate.
HIGH WIND PROFILE GATE ARM
8
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
9
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
INDIVIDUAL GATE SECTIONS - HI INTENSITY VERTICAL STRIPING
Standard Aluminum Base Sections NEG Part #s
8 Ft Aluminum Base Section NEG-2120HV-8S?
16 Ft Aluminum Base Section NEG-2120HV-16S?
21 Ft Aluminum Base Section NEG-2120HV-21S?
24 Ft Aluminum Base Section NEG-2120HV-24S?
"?" Replace with desired sleeve length EX. 2 for 2ft Sleeve
Standard Fiberglass Base Sections NEG Part #s
8 Ft Fiberglass Base Section NEG-501HV-8S?
16 Ft Fiberglass Base Section NEG-501HV-16S?
"?" Replace with desired sleeve length EX. 2 for 2ft Sleeve
Standard Fiberglass 2nd Sections NEG Part #s
8 Ft Fiberglass 2nd Section NEG-502HV-8
12 Ft Fiberglass 2nd Section NEG-502HV-12
16 Ft Fiberglass 2nd Section NEG-502HV-16
21 Ft Fiberglass 2nd Section NEG-502HV-21
Standard Fiberglass 3rd Sections NEG Part #s
8’ Ft Fiberglass 3rd Section NEG-503HV-8
12 Ft Fiberglass 3rd Section NEG-503HV-12
16 Ft Fiberglass 3rd Section NEG-503HV-16
Sleeve Reinforcements NEG Part #s
2 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-2SL
4 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-4SL
6 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-6SL
8 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-8SL
10 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-10SL
12 Ft Aluminum Sleeve Insert for Base Section Gates
NEG-12SL
High Wind Profile Aluminum Base Sections NEG Part #s
8 Ft HWP Aluminum Base Section NEG-3130HV-8S?
16 Ft HWP Aluminum Base Section NEG-3130HV-16S?
21 Ft HWP Aluminum Base Section NEG-3130HV-21S?
24 Ft HWP Aluminum Base Section NEG-3130HV-24S?
"?" Replace with desired sleeve length EX. 2 for 2ft Sleeve
High Wind Profile Fiberglass Base Sections NEG Part #s
8 Ft HWP Fiberglass Base Section NEG-1WC501AHV-S?
16 Ft HWP Fiberglass Base Section NEG-1WC501BHV-S?
"?" Replace with desired sleeve length EX. 2 for 2ft Sleeve
High Wind Profile Aluminum 2nd Sections NEG Part #s
10 Ft HWP Aluminum 2nd Section NEG-1WCA502BHV
16 Ft HWP Aluminum 2nd Section NEG-1WCA502CHV
High Wind Profile Fiberglass 2nd Sections NEG Part #s
8 Ft HWP Fiberglass 2nd Section NEG-1WC502BHV
16 Ft HWP Fiberglass 2nd Section NEG-1WC502CHV
High Wind Profile Aluminum 3rd Sections NEG Part #s
10 Ft HWP Aluminum 3rd Section NEG-1WCA503BHV
12 Ft HWP Aluminum 3rd Section NEG-1WCA503CHV
High Wind Profile Fiberglass 3rd Sections NEG Part #s
10 Ft HWP Fiberglass 3rd Section NEG-1WCA503BHV
12 Ft HWP Fiberglass 3rd Section NEG-1WCA503CHV
*articulate 30% of original length.
E1Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Electronic Crossing Bell
Features
Item Description NEG Number
1 Bell Part NEG-1210EBL
1A Bell Part with a lighting arrestor included on the circuit board NEG-1210EBL/S
The tone of the bell is on a microchip and is sounded thru an outdoorspeaker. The warning sound is a duplicate of the mechanical bell sound. It utilizes the same electrical leads as the mechanical bell and is positioned on top of the mast pole. The electronic bell meets or exceeds all the arema specifications. The bell circuit draws less than 0.15 amps, which is 10 percent of the current draw of the mechanical bell. Sound reading range of 85 to 95 decibels in a 180 degree plane. 250 strokes per minute. Operating voltage of 10 + - 25 % volts dc . Mounts to a 4 or 5 inch mast pole. There is access to the volume control. Dimensions of bell upon request. Weight is less than 10 pounds.
D1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Brackets and Mast Extensions
Stub Mast
Item Description NEG Number
1 High Wind Bracket 30” Mouth WIG-191030
2 High Wind Bracket 36” Mouth WIG-191036
3 High Wind Bracket 48” Mouth WIG-191048
4 High Wind Bracket 60” Mouth WIG-191060
5 Drilling Fixture for Mast Extension Installation FIX-EX-121001
Not Shown Mast Extension to Convert Stub Mast to 15 ft. WIG-EX-121000
1
2
3
4
5
WIG-1910060
WIG-1910030
A8Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Articulated Gate Arms
24 - Not in drawin
25 - Drawing upon request
ORDERING INFORMATIONItem Number Section Description Requirements
1 2nd Section NEG 502 - Add Length Plus A.G.T.
2 3rd Section NEG 503 - Add Length Plus A.G.T.
3 Spacer Block 3/4 x 1 1/2 x 4 34 Aluminum Flat 4 Required
4 Extension Plate 1/4 x 4 x 24 Aluminum Flat 2 Required
5 Stop Bar 1/4 x 1 1/2 x 5 Aluminum Flat 1 Required
6 Hinge Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
7 Swivel Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
8 Cable Plate 1/8 x 10 x 13 1/2 Steel Plate 2 Required
9 Striker Support 1 1/2 x 4 x 3/16 x 1 1/2 Steel Angle 2 Required
10 Brass Bushing See Detailed Drawing 2 Required
11 Steel Shaft See Detailed Drawing 1 Required
12 Hex Nut 1/2 - 13 Hex Stainless Steel 2 Required
13 Cotton Pin 1/8 x 1 1/2 Stainless Steel 2 Required
14 Hex Head Cap Screw 1/4 - 20 x 3/4 Stainless Steel 6 Required
15 Split Lock Washer 1/4 Stainless Steel 6 Required
16 Internal Lock Washer 5/16 Stainless Steel 24 Required
17 Hex Head Cap Screw 5/16 - 18 x 1 3/4 Stainless Steel 8 Required
18 Hex Head Cap Screw 5/16 - 18 x 1 Stainless Steel 16 Required
19 Hex Head Cap Screw 1/2 - 13 x 3 1/2 Stainless Steel 2 Required
20 Hex Jam Nut 1/2 - 13 Stainless Steel 8 Required
21 Threaded Rod 1/2 - 13 x 3 1/2 Stainless Steel 1 Required
22 Guye Wire Cable Assembly NEG (Length of Gate Arm)
23 Pully System NEG (Length of Gate Arm)
24 Offset Stangent NEG (5 A.G.T. - 10 NEG / 5 A.G.T.-12)
25 Regular Stangent NEG (5 A.G.T. - 5)
ARTICULATED GATE ARMS
We have had over 20 years experience with articulated gates and now offer a standard arm for your special requirements. Articulated gates are used in areas of overhead power lines and cantilevers that would otherwise obstruct a gate arm in its upright position. Articulated gates fold at one third the length as to decrease the vertical position, so the gate does not get hung up with aforementioned items.
Please use the following parts list to order specific replacement items for maintenance. See detailed drawings on following page.
10
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
11
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
24 - Not in drawing25 - Drawing upon request
ARTICULATED GATE ARMS
A7 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Articulated Gate Arms
Ordering Information
We have had over 20 years experience with ar ticulated gates
and now offer a standard arm for your special requirements.
Articulated gates are used in areas of overhead power lines
and cantilevers that would otherwise obstruct a gate arm in
its upright position. Articulated gates fold at one third the
length as to decrease the vertical position, so the gate does
not get hung up with aforementioned items.
Please use the following parts list to order specific
replacement items for maintenance.
See detailed drawings on following page.
Item Number Section Description Requirements
1 2nd Section NEG 502 - Add Length Plus A.G.T.
2 3rd Section NEG 503 - Add Length Plus A.G.T.
3 Spacer Block 3/4 x 1 1/2 x 4 34 Aluminum Flat 4 Required
4 Extension Plate 1/4 x 4 x 24 Aluminum Flat 2 Required
5 Stop Bar 1/4 x 1 1/2 x 5 Aluminum Flat 1 Required
6 Hinge Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
7 Swivel Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
8 Cable Plate 1/8 x 10 x 13 1/2 Steel Plate 2 Required
9 Striker Support 1 1/2 x 4 x 3/16 x 1 1/2 Steel Angle 2 Required
10 Brass Bushing See Detailed Drawing 2 Required
11 Steel Shaft See Detailed Drawing 1 Required
12 Hex Nut 1/2 - 13 Hex Stainless Steel 2 Required
13 Cotton Pin 1/8 x 1 1/2 Stainless Steel 2 Required
14 Hex Head Cap Screw 1/4 - 20 x 3/4 Stainless Steel 6 Required
15 Split Lock Washer 1/4 Stainless Steel 6 Required
16 Internal Lock Washer 5/16 Stainless Steel 24 Required
17 Hex Head Cap Screw 5/16 - 18 x 1 3/4 Stainless Steel 8 Required
18 Hex Head Cap Screw 5/16 - 18 x 1 Stainless Steel 16 Required
19 Hex Head Cap Screw 1/2 - 13 x 3 1/2 Stainless Steel 2 Required
20 Hex Jam Nut 1/2 - 13 Stainless Steel 8 Required
21 Threaded Rod 1/2 - 13 x 3 1/2 Stainless Steel 1 Required
22 Guye Wire Cable Assembly NEG (Length of Gate Arm)
23 Pully System NEG (Length of Gate Arm)
24 Offset Stangent NEG (5 A.G.T. - 10 NEG / 5 A.G.T.-12)
25 Regular Stangent NEG (5 A.G.T. - 5)
*articulate 30% of original length.
E1Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Electronic Crossing Bell
Features
Item Description NEG Number
1 Bell Part NEG-1210EBL
1A Bell Part with a lighting arrestor included on the circuit board NEG-1210EBL/S
The tone of the bell is on a microchip and is sounded thru an outdoorspeaker. The warning sound is a duplicate of the mechanical bell sound. It utilizes the same electrical leads as the mechanical bell and is positioned on top of the mast pole. The electronic bell meets or exceeds all the arema specifications. The bell circuit draws less than 0.15 amps, which is 10 percent of the current draw of the mechanical bell. Sound reading range of 85 to 95 decibels in a 180 degree plane. 250 strokes per minute. Operating voltage of 10 + - 25 % volts dc . Mounts to a 4 or 5 inch mast pole. There is access to the volume control. Dimensions of bell upon request. Weight is less than 10 pounds.
D1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Brackets and Mast Extensions
Stub Mast
Item Description NEG Number
1 High Wind Bracket 30” Mouth WIG-191030
2 High Wind Bracket 36” Mouth WIG-191036
3 High Wind Bracket 48” Mouth WIG-191048
4 High Wind Bracket 60” Mouth WIG-191060
5 Drilling Fixture for Mast Extension Installation FIX-EX-121001
Not Shown Mast Extension to Convert Stub Mast to 15 ft. WIG-EX-121000
1
2
3
4
5
WIG-1910060
WIG-1910030
A9 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Flex Tip Sections
Ordering Information
National Electric Gate has realized a usage for a short tip section that is flexible in use and can be used to fit in the second or third sections of the crossing gate arm in usage today. This section allows the crossing gate arm to remain in place if a car or truck illegally passes a crossing gate arm in a down position. This section then returns to its original position. We use a copolymer that is excellent in extreme cold and hot conditions that might occur outdoors.
“Alumi-Glass” Crossing Gate Arms NEG 504-SLHigh Wind Profile Crossing Gate Arms NEG 504-TP
*These items come in a kit and allow you to adapt your tip section to the gate arm of either a second or third section.
Please Call the factory for quantity price breaks. All material is in stock ready for immediate shipment.
36”
36”
NEG 504-SL
NEG 504-TP
C5Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
LED Gate Arm Light Set
National Electric Gate Company has an LED Array Gate Arm Light Set for the most demanding railroad crossing applications. “Yours”!! National Electric Gates LED light set is practically indestructible and mounts on top of your gate arm for great visibility. Made of polycarbonate, which gives this light box the durability for continued abuse in most knockdown traffic conditions, the LED array gate arm lights are in stock and ready for your toughest crossing applications.
Ordering Information
Item Description NEG Number
1 LED Array Base and Middle Head Lamp NEG-2018-LED1
2 LED Array Unit NEG-2018-LED-E
3 Total LED Assembly(Complate with Coil Cords and Connectors)
NEG-2018-3LEDARR
4 Coil Cord Cables and Commectors(Only with Fittings Package)
NEG-203CCARRY
2
3
4
4
4
1
C4 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Bayonet BA15s
REF.
1.7 [43.6mm]
0.98 [24.9mm]
1.60 [40.6mm] 0.100 [2.5mm]
0.595 [15.1mm]
1
2
DESIGNFOR 10VDC
ALTERNATE 10VDCAND 10VAC
10V, 350mA INPUT
LEDPart No.
ChipBXA-1032 Electro-Optical Data
@ 14-32 VDCLamp
ViewingAngle(Deg)Material Emitted Color
Dominant WaveLength λd(nm)
Pd(W)2.7
Lumes@1 LED/Side
Typ.
BDL-1199 AllnGaP RED 620 645 30 140
Operating Temperature Range: -25°C ~ 85°C
Storage Temperature: -30°C ~ 100°C
Operating DC Voltage: 14V ~ 32V
Operating AC Voltage: 10V ~ 22V
Lamp Absolute Maximum Ratings
Standard Tolerance(Unless Otherwise Specified) National Electric Gate Company ��
�����
����������������������
�����
��������������������
252 Pine Barren Rd. P.O. Box 706 Pooler, GA 31322
TEL: 912.748.5090 FAX: 912.748.7542 Decimals.X ±.1
.XX ±.02.XXX ±.010
X° ±1°
Part No:NEG-
Title: Gate Arm Lamp2 1W-LED, BA 15S, 24vdc
Item QTY Part No. Part Description
1 1 PCBA-1063 PCB Lamp Assembly
2 2 CLP-1041 Light Pipe Lens
3 2 BDL-1199 1Ww LED Red
24 Volt LEDFor European gate lamp application
A9 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Flex Tip Sections
Ordering Information
National Electric Gate has realized a usage for a short tip section that is flexible in use and can be used to fit in the second or third sections of the crossing gate arm in usage today. This section allows the crossing gate arm to remain in place if a car or truck illegally passes a crossing gate arm in a down position. This section then returns to its original position. We use a copolymer that is excellent in extreme cold and hot conditions that might occur outdoors.
“Alumi-Glass” Crossing Gate Arms NEG 504-SLHigh Wind Profile Crossing Gate Arms NEG 504-TP
*These items come in a kit and allow you to adapt your tip section to the gate arm of either a second or third section.
Please Call the factory for quantity price breaks. All material is in stock ready for immediate shipment.
36”
36”
NEG 504-SL
NEG 504-TP
C5Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
LED Gate Arm Light Set
National Electric Gate Company has an LED Array Gate Arm Light Set for the most demanding railroad crossing applications. “Yours”!! National Electric Gates LED light set is practically indestructible and mounts on top of your gate arm for great visibility. Made of polycarbonate, which gives this light box the durability for continued abuse in most knockdown traffic conditions, the LED array gate arm lights are in stock and ready for your toughest crossing applications.
Ordering Information
Item Description NEG Number
1 LED Array Base and Middle Head Lamp NEG-2018-LED1
2 LED Array Unit NEG-2018-LED-E
3 Total LED Assembly(Complate with Coil Cords and Connectors)
NEG-2018-3LEDARR
4 Coil Cord Cables and Commectors(Only with Fittings Package)
NEG-203CCARRY
2
3
4
4
4
1
C4 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Bayonet BA15s
REF.
1.7 [43.6mm]
0.98 [24.9mm]
1.60 [40.6mm] 0.100 [2.5mm]
0.595 [15.1mm]
1
2
DESIGNFOR 10VDC
ALTERNATE 10VDCAND 10VAC
10V, 350mA INPUT
LEDPart No.
ChipBXA-1032 Electro-Optical Data
@ 14-32 VDCLamp
ViewingAngle(Deg)Material Emitted Color
Dominant WaveLength λd(nm)
Pd(W)2.7
Lumes@1 LED/Side
Typ.
BDL-1199 AllnGaP RED 620 645 30 140
Operating Temperature Range: -25°C ~ 85°C
Storage Temperature: -30°C ~ 100°C
Operating DC Voltage: 14V ~ 32V
Operating AC Voltage: 10V ~ 22V
Lamp Absolute Maximum Ratings
Standard Tolerance(Unless Otherwise Specified) National Electric Gate Company ��
�����
����������������������
�����
��������������������
252 Pine Barren Rd. P.O. Box 706 Pooler, GA 31322
TEL: 912.748.5090 FAX: 912.748.7542 Decimals.X ±.1
.XX ±.02.XXX ±.010
X° ±1°
Part No:NEG-
Title: Gate Arm Lamp2 1W-LED, BA 15S, 24vdc
Item QTY Part No. Part Description
1 1 PCBA-1063 PCB Lamp Assembly
2 2 CLP-1041 Light Pipe Lens
3 2 BDL-1199 1Ww LED Red
24 Volt LEDFor European gate lamp application
ARTICULATED GATE ARM -STANGENT & OFF-SET STANGENT
ARTICULATED GATE ARM - STANGENTItem Description Qty. Required
1 5” Mast Pole X
2 Cast Aluminum Mast Bracket 1
3 1/2” Stainless Steel U-Bolt 1
4 1/2” x 3” Eye Bolt 1
5 1/2” - 13 Hex Nut Stainless Steel 4
6 1/2” Washer - Split Lock Stainless Steel 3
7 1/2” Washer - Medium Flat Stainless Steel 4
ARTICULATED GATE ARM - OFF-SET STANGENTItem Description Qty. Required
1 Mast Pole X
2 Steel Strap 2
3 Steel Extension Arm 1
4 1/2” x 3” Eye Bolt 1
5 1/2’ - 13 Hex Nut Stainless Steel 4
6 1/2” Washer - Split Lock 3
7 1/2” Washer - Medium Flat 6
8 1/2” - 13 x 3 1/2 Screw - Hex Head Cap 1
9 1/2” - 13 x 4 1/2 Screw - Hex Head Cap 1
12
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
13
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
National Electric Gate has realized a usage for a short tip section that is flexible in use and can be used to fit in the second or third sections of the crossing gate arm in usage today. This section allows the crossing gate arm to remain in place if a car or truck illegally passes a crossing gate arm in a down position. This section then returns to its original position. We use a copolymer that is excellent in extreme cold and hot conditions that might occur outdoors.
“Alumi-Glass” Crossing Gate Arms NEG 504-SL
High Wind Profile Crossing Gate Arms NEG 504-TP
*These items come in a kit and allow you to adaptyour tip section to the gate arm of either a second orthird section.
Please Call the factory for quantity price breaks. Allmaterial is in stock ready for immediate shipment.
ORDERING INFORMATION
FLEX TIP SECTIONS
36”
36”
NEG 504-SL
NEG 504-TP
C5Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
LED Gate Arm Light Set
National Electric Gate Company has an LED Array Gate Arm Light Set for the most demanding railroad crossing applications. “Yours”!! National Electric Gates LED light set is practically indestructible and mounts on top of your gate arm for great visibility. Made of polycarbonate, which gives this light box the durability for continued abuse in most knockdown traffic conditions, the LED array gate arm lights are in stock and ready for your toughest crossing applications.
Ordering Information
Item Description NEG Number
1 LED Array Base and Middle Head Lamp NEG-2018-LED1
2 LED Array Unit NEG-2018-LED-E
3 Total LED Assembly(Complate with Coil Cords and Connectors)
NEG-2018-3LEDARR
4 Coil Cord Cables and Commectors(Only with Fittings Package)
NEG-203CCARRY
2
3
4
4
4
1
C4 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Bayonet BA15s
REF.
1.7 [43.6mm]
0.98 [24.9mm]
1.60 [40.6mm] 0.100 [2.5mm]
0.595 [15.1mm]
1
2
DESIGNFOR 10VDC
ALTERNATE 10VDCAND 10VAC
10V, 350mA INPUT
LEDPart No.
ChipBXA-1032 Electro-Optical Data
@ 14-32 VDCLamp
ViewingAngle(Deg)Material Emitted Color
Dominant WaveLength λd(nm)
Pd(W)2.7
Lumes@1 LED/Side
Typ.
BDL-1199 AllnGaP RED 620 645 30 140
Operating Temperature Range: -25°C ~ 85°C
Storage Temperature: -30°C ~ 100°C
Operating DC Voltage: 14V ~ 32V
Operating AC Voltage: 10V ~ 22V
Lamp Absolute Maximum Ratings
Standard Tolerance(Unless Otherwise Specified) National Electric Gate Company ��
�����
����������������������
�����
��������������������
252 Pine Barren Rd. P.O. Box 706 Pooler, GA 31322
TEL: 912.748.5090 FAX: 912.748.7542 Decimals.X ±.1
.XX ±.02.XXX ±.010
X° ±1°
Part No:NEG-
Title: Gate Arm Lamp2 1W-LED, BA 15S, 24vdc
Item QTY Part No. Part Description
1 1 PCBA-1063 PCB Lamp Assembly
2 2 CLP-1041 Light Pipe Lens
3 2 BDL-1199 1Ww LED Red
24 Volt LEDFor European gate lamp application
A10Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Articulated Gate Arm - Stangent & Off-Set Stangent
Articulated Gate Arm - Stangent
Item Description Qty. Required
1 5” Mast Pole X
2 Cast Aluminum Mast Bracket 1
3 1/2” Stainless Steel U-Bolt 1
4 1/2” x 3” Eye Bolt 1
5 1/2” - 13 Hex Nut Stainless Steel 4
6 1/2” Washer - Split Lock Stainless Steel 3
7 1/2” Washer - Medium Flass Stainless Steel 4
Articulated Gate Arm - Off-Set Stangent
Item Description Qty. Required
1 Mast Pole X
2 Steel Strap 2
3 Steel Extension Arm 1
4 1/2” x 3” Eye Bolt 1
5 1/2’ - 13 Hex Nut Stainless Steel 4
6 1/2” Washer - Split Lock 3
7 1/2” Washer - Medium Flat 6
8 1/2” - 13 x 3 1/2 Screw - Hex Head Cap 1
9 1/2” - 13 x 4 1/2 Screw - Hex Head Cap 1
BUFFER LEG
ORDER ITEM NUMBER: NEG 130B
14
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
15
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
GATE-SAVER - ONE-WAY
ORDERING INFORMATIONGate-Saver is the most versatile gate arm saver in the railroad industry. It allows gate arms, hit by a moving vehicle, to rotate out of the way and return to the original position without damaging the arm.
The all-new Gate-Saver can handle gate lengths up to 38 feet long in all types of applications, eliminating the need to carry more than one type of Gate-Saver in your inventory.
A few of the benefits of this “Gate-Saver” breakaway is that it works with gate arms up to 42 feet, also it will disengage, so as to allow the maintainer to fix or install a new gate arm off to the side of the road but still be installed and affixed to the counterweight arms. This is a real safety factor for the maintainer. Another point of interest, is that our “Gate-Saver” has a counter attached to it so it will actually give you feed back as to the number of times a vehicle hits the gate arm. And last but not least, the “Gate-Saver works on exit and entrance applications.
Let us put one at your busiest intersection/crossing and show you the immediate cost savings Gate-Saver can provide.
ORDER ITEM NUMBER: NEG 385102GS | NEG 74GS “shear bolt”
GATE-SAVER - TWO-WAY
ORDERING INFORMATIONGate-Saver 2-WAY is the most versatile gate arm saver in the railroad industry. It allows gate arms, hit by a moving vehicle from either direction, to rotate out of the way and return to the original position without damaging the arm.
The all-new Gate-Saver 2-WAY can handle gate lengths up to 38 feet long in all types of applications, eliminating the need to carry more than one type of Gate-Saver in your inventory.
A few of the benefits of this “Gate-Saver” breakaway is that it works with gate arms up to 42 feet, also it will dis-engage, so as to allow the maintainer to fix or install a new gate arm off to the side of the road but still be installed and affixed to the counterweight arms. This is a real safety factor for the maintainer. Another point of interest, is that our “Gate-Saver” has a counter attached to it so it will actually give you feed back as to the number of times a vehicle hits the gate arm. And last but not least, the “Gate-Saver works on exit and entrance applications.
Let us put one at your busiest intersection/crossing and show you the immediate cost savings Gate-Saver 2-WAY can provide.
ORDER ITEM NUMBER: NEG385102GS-2W | NEG74GS-2W “shear bolt” | NEG74GS-2W1 “long shear bolt”
16
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
17
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
CONVERSION BRACKETS & ASSEMBLIESMAST-MOUNTED GATES
ORDERING INFORMATIONReference Description NEG Number
A Complete Conversion Bracket (with Cast Adapter) 385102
B Complete Conversion Bracket (with Fabricated Adapter) 681040
REPLACEMENT PARTSReference Description NEG Number
1 Conversion Bracket Only (Ref. A) 385102C
2 Cast Adapter (Ref. A) 385102ADP
3 Shear Bolt Assembly 74
4 Conversion Bracket Only (Ref. B) 681040C
5 Fabricated Adapter (Ref. B) 681040ADP
Ref. A
Ref. B
Conversion Bracket(Break down)
King Pin (upclose)
Conversion Brackets & Assemblies Mast-Mounted Gates
C1Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Gate Lamp
4 Inch Diameter
Item Description NEG Number
1Complete Conversion Bracket (with Cast Adapter)Complete with All Hardware
NEG-2018
1A Lens Replacement Kit - Includes One Lens, One Gasket and Mounting Screws - Red NEG-215
1B Junction Box with Cover and Fitting NEG-202
1C 4” Lamp Head Complete (Bulb Not Included) NEG-214
For complete signal bulb order information see full line brochure
1C
1
1B
B1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Gate-Saver - One-way
Gate-Saver is the most versatile gate arm saver in the railroad industry. It allows gate arms, hit by a moving vehicle, to rotate out of the way and return to the original position without damaging the arm.
The all-new Gate-Saver can handle gate lengths of 10 feet to over 42 feet long in all types of applications, eliminating the need to carry more than one type of Gate-Saver in your inventory.
A few of the benefits of this “Gate-Saver” breakaway is that it works with gate arms up to 42 feet, also it will disengage, so as to allow the maintainer to fix or install a new gate arm off to the side of the road but still be installed and affixed to the counterweight arms. This is a real safety factor for the maintainer. Another point of interest, is that our “Gate-Saver” has a counter attached to it so it will actually give you feed back as to the number of times a vehicle hits the gate arm. And last but not least, the “Gate-Saver works on exit and entrance applications.
Let us put one at your busiest intersection/crossing and show you the immediate cost savings Gate-Saver can provide.
Ordering Information
Order item number:NEG385102GS | NEG74GS “shear bolt”
C3Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Ordering Information
Item Description NEG Number
1a Includes Coil Cords, Lamp Head Set by 3, and Straight Cord with Connectors NEG-2018-3DC
2a Lamp Head Only NEG-2018D
3a Coil Cord Assemly with Connectors NEG-183CCD
Bulb Information
Item Description NEG Number
1b Double Sided - Clear NEG-18200-R
2b Red NEG-18200-SSR
3b Green NEG-18200-SSG
4b Amber NEG-18200-SSA
Advantages
• No disconnect necessary to adjust light sequencing.
• Uses set screws for easy and fast change-outs in
maintenance repairs.
• All parts are available from our inventory for
immediate shipment.
• Highly durable lamp head with crush and impact
resistant compounds.
• Lamp Head adjustments for offsetapplications available.
• Vandal resistant disconnect on Digital Lamp Head connector.
Bulbs are available in four colors: Clear, Red Frost, Green, Red.
Coil Cord Options:
3a
Singled Sided LEDs
Used for hump yard applications
1b 2b 3b 4b
Digital Lamp Heads and LED Bulbs
NEG-SLB500 NEG-SLB5TA NEG-SSW NEG-183CC
B2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Gate-Saver - Two-way
Gate-Saver 2-WAY is the most versatile gate arm saver in the railroad industry. It allows gate arms, hit by a moving vehicle from either direction, to rotate out of the way and return to the original position without damaging the arm.
The all-new Gate-Saver 2-WAY can handle gate lengths of 10 feet to over 42 feet long in all types of applications, eliminating the need to carry more than one type of Gate-Saver in your inventory.
A few of the benefits of this “Gate-Saver” breakaway is that it works with gate arms up to 42 feet, also it will disengage, so as to allow the maintainer to fix or install a new gate arm off to the side of the road but still be installed and affixed to the counterweight arms. This is a real safety factor for the maintainer. Another point of interest, is that our “Gate-Saver” has a counter attached to it so it will actually give you feed back as to the number of times a vehicle hits the gate arm. And last but not least, the “Gate-Saver works on exit and entrance applications.
Let us put one at your busiest intersection/crossing and show you the immediate cost savings Gate-Saver 2-WAY can provide.
Ordering Information
Order item number:NEG385102GS-2W | NEG74GS-2W “shear bolt” | NEG74GS-2W1 “long shear bolt”
LIGHT BRACKET
Our new sliding light bracket is an added dimension to the already existing telescoping adjustable gate arms of ours. The sliding light bracket along with our coil, cord assembly makes this gate arm unit a very simple maintenance free assembly to install and maintain. The sliding light bracket (SLB) makes the installation of the gate arms and light a very easy process. Adjustments are timeless, using the set screws, and all parts are interchangeable and can be pur-chased piecemeal. Your installation time now for the gate arms should save your maintainer 50% of his time. The SLB spacers allows a firm fit on any section of the gate arms.
NEG-SLB500 NEG-SLB5TA NEG-SSW NEG-183CC
18
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
19
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
NEW NEG LIGHTSET
ORDERING INFORMATIONNEG Order Number Description
NEG--2018-3DCLED Complete light kit
NEG-2018-1DCLED Individual Lamp heads
NEG-2018-CC-L Long Coil Cords
NEG-2018-CC-S Short Coil Cords
NEG-2018-SC Straight Cord
NEG-2018-L Replacement Lens
NEG-2018-G Replacement Gasket
NEG-2018-TLC Tip Lamp Cap
COMPARISON CHARTParameter NEG
Input Voltage Range AC/DC 8-18V
Avg. Current 12VDC Input @25 deg. C 280ma
Max Current @ Max Input Voltage <320ma @ 18V
Light Output @ 12V Input Light output very consistent as light stays on.
Approximately 35% more light output at 12V
Heat Dissipation Approximately 20 deg. C less heat dissipation
Tips light pulsing None
REVERSE DIODE GATE LIGHT KIT
LIGHT ELECTRICAL SPECIFICATIONSParameter NEG Competitor
Input Voltage Range AC/DC 8-18V 8-15V
Avg Current 12VDC Input @25 deg. C 280ma 330ma
Max Current @ Max Input Voltage < 320ma @ 18V < 350ma @ 15V
Light Output @ 12V Input Light output very consistent as light stays on. Light output decreases as light stays on.
Approximately 35% more light output at 12V Less light output
Heat Dissipation Approximately 20 deg C less heat dissipation Approximately 20 deg C more heat dissipation
Tip light pulsing None Slight pulse
The purpose of these 2 different lamp heads is to maintain proper current flow to the LED Tip Lamp. The IXC, CCU-2, and XLC crossing controllers are some crossing controllers that require a special diode setup in the Tip Lamp to ensure proper functionality. Some symptoms of erratic behavior include not being able to sync the lights correctly (Tip light not staying solid), flickering lights, and lights not fully extinguishing when flashing.
Installation InstructionsUnlike our competitor you are not required to purchase any additional parts to make these Tip Lamps function. We have internally wired the fix for you and all you will need to do is replace your current tip lamp with the new RD-A or RD-B. You can order an individual head to retro fit an existing light set or you can order a complete reverse diode light kit. In either instance make sure that the tip lamp that is labeled RD-A or RD-B is positioned as the TIP LAMP or it will not function correctly and could cause an LED failure. *Note* The Mid and Base lamp heads will not be marked at all, so position those in their normal location.
Please contact our sales team if you need further technical assistance.
NEG Part Number
Tip Lamp Assembly for CCU-2 & XLC NEG-2018-1DCLED-RD-A
Tip Lamp Assembly for IXC NEG-2018-1DCLED-RD-B
Complete Light Kit with RD-A (Short Cords) NEG-2018-3DCLEDSC-RD-A
Complete Light Kit with RD-B (Short Cords) NEG-2018-3DCLEDSC-RD-B
Complete Light Kit with RD-A (Long Cords) NEG-2018-3DCLEDLC-RD-A
Complete Light Kit with RD-B (Long Cords) NEG-2018-3DCLEDLC-RD-B
20
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
21
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
National Electric Gate Company has an LED Array Gate Arm Light Set for the most demanding railroad crossing applications. “Yours”!! National Electric Gates LED light set is practically indestructible and mounts on top of your gate arm for great visibility. Made of polycarbonate, which gives this light box the durability for continued abuse in most knockdown traffic conditions, the LED array gate arm lights are in stock and ready for your toughest crossing applications.
LED GATE ARM LIGHT SET
ORDERING INFORMATIONItem Description NEG Number
1 LED Array Base and Middle Lamp NEG-2018-1LEDARR
2 LED Array Tip Lamp NEG-2018-1LEDARR-TIP
3 Straight Cord NEG-2018-203SCARR
4 Individual Coil Cords NEG-2018-203CCARR
5 Hardware Pack NEG-2018-LEDARR-HW
6 Complete Light Kit NEG-2018-3LEDARR
OPERATING SPECIFICATIONSOperating Voltage 8.5V AC/DC - 18V AC/DC
Minimum Forward Current 10mA
Typical Max Current Draw (At 10V DC) 0.30A
Typical Max Power Consumption (At 10V DC Per Light)
-3.0W
Dominant Wavelength 0.629mm (RED)
PERFORMANCE STANDARDSVibration (X,Y and Z Axis) A.R.E.M.A. 2006,
MIL-STD 810F
Operating Temperature -40° C to 70° C
IP Rating IP 65
Electronic Noise A.R.E.M.A. 2006
Storage Temperature -40° C to 85° C
3
4
4
5
6 - Part #: NEG-2018-3LEDARR
2
1
1
3
4
4
5
6 - Part #: NEG-2018-3LEDARR
2
1
1
STUB MASTItem Description NEG Number
1 High Wind Bracket 30” Mouth WIG-191030
2 High Wind Bracket 36” Mouth WIG-191036
3 High Wind Bracket 48” Mouth WIG-191048
4 High Wind Bracket 60” Mouth WIG-191060
5 Drilling Fixture for Mast Extension Installation FIX-EX-121001
Not Shown Mast Extension to Convert Stub Mast to 15 ft. WIG-EX-121000
HIGH WIND BRACKETS AND MAST EXTENSIONS
A7 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Articulated Gate Arms
Ordering Information
We have had over 20 years experience with ar ticulated gates
and now offer a standard arm for your special requirements.
Articulated gates are used in areas of overhead power lines
and cantilevers that would otherwise obstruct a gate arm in
its upright position. Articulated gates fold at one third the
length as to decrease the vertical position, so the gate does
not get hung up with aforementioned items.
Please use the following parts list to order specific
replacement items for maintenance.
See detailed drawings on following page.
Item Number Section Description Requirements
1 2nd Section NEG 502 - Add Length Plus A.G.T.
2 3rd Section NEG 503 - Add Length Plus A.G.T.
3 Spacer Block 3/4 x 1 1/2 x 4 34 Aluminum Flat 4 Required
4 Extension Plate 1/4 x 4 x 24 Aluminum Flat 2 Required
5 Stop Bar 1/4 x 1 1/2 x 5 Aluminum Flat 1 Required
6 Hinge Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
7 Swivel Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
8 Cable Plate 1/8 x 10 x 13 1/2 Steel Plate 2 Required
9 Striker Support 1 1/2 x 4 x 3/16 x 1 1/2 Steel Angle 2 Required
10 Brass Bushing See Detailed Drawing 2 Required
11 Steel Shaft See Detailed Drawing 1 Required
12 Hex Nut 1/2 - 13 Hex Stainless Steel 2 Required
13 Cotton Pin 1/8 x 1 1/2 Stainless Steel 2 Required
14 Hex Head Cap Screw 1/4 - 20 x 3/4 Stainless Steel 6 Required
15 Split Lock Washer 1/4 Stainless Steel 6 Required
16 Internal Lock Washer 5/16 Stainless Steel 24 Required
17 Hex Head Cap Screw 5/16 - 18 x 1 3/4 Stainless Steel 8 Required
18 Hex Head Cap Screw 5/16 - 18 x 1 Stainless Steel 16 Required
19 Hex Head Cap Screw 1/2 - 13 x 3 1/2 Stainless Steel 2 Required
20 Hex Jam Nut 1/2 - 13 Stainless Steel 8 Required
21 Threaded Rod 1/2 - 13 x 3 1/2 Stainless Steel 1 Required
22 Guye Wire Cable Assembly NEG (Length of Gate Arm)
23 Pully System NEG (Length of Gate Arm)
24 Offset Stangent NEG (5 A.G.T. - 10 NEG / 5 A.G.T.-12)
25 Regular Stangent NEG (5 A.G.T. - 5)
*articulate 30% of original length.
E1Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Electronic Crossing Bell
Features
Item Description NEG Number
1 Bell Part NEG-1210EBL
1A Bell Part with a lighting arrestor included on the circuit board NEG-1210EBL/S
The tone of the bell is on a microchip and is sounded thru an outdoorspeaker. The warning sound is a duplicate of the mechanical bell sound. It utilizes the same electrical leads as the mechanical bell and is positioned on top of the mast pole. The electronic bell meets or exceeds all the arema specifications. The bell circuit draws less than 0.15 amps, which is 10 percent of the current draw of the mechanical bell. Sound reading range of 85 to 95 decibels in a 180 degree plane. 250 strokes per minute. Operating voltage of 10 + - 25 % volts dc . Mounts to a 4 or 5 inch mast pole. There is access to the volume control. Dimensions of bell upon request. Weight is less than 10 pounds.
1
2
3
4
5
WIG-1910060
WIG-1910030
A8Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Articulated Gate Arms
24 - Not in drawin
25 - Drawing upon request
22
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
23
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
A5 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-3130-8
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503B
E3Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Insulation - ETFE (Extruded)
ETFE - Ethylene-Tetrafluoroethylebe Coparlymer
“Small Diameter”Tin-Coated Stranded Copper Conductor
Military Specifications
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of Specification MIL-W-22759.
Construction Details (Table 1)
* Part No.: The astrisks in the part number column, Tables I & II, shall be replaced by color code designators in accordance with MIL-STD-681. Exam-ples: Size 20, White - M22759/16-20-9; White with Orange Stripe - M22759/16-20-93
1/ : Also for bend tests after immersioin. 2/ : Use mandrel for wire size 2 and larger in “wrap back” test.
Bend Test Mandrels and Test Loads (Table II)
Diameter of StrandedConductors (inches) Finished Wire
Part No. * Wire Size
Stranding (Number of
Strands) x AWG Gage of Strands Min. Max
Resistance at 20°C (68°F)
(ohms/1000 ft.) Max
Diamter(Inches)
Weight(lbs./1000 ft.)
Max
M22759/16-20-* 20 19 x 32 .037 .039 9.88 .060 ± .002 5.36
M22759/16-18-* 18 19 x 30 .046 .049 6.23 .071 ± .002 7.89
M22759/16-16-* 16 19 x 29 .052 .055 4.81 .078 ± .002 9.95
M22759/16-14-* 14 19 x 27 .065 .069 3.06 .093 ± .002 14.9
M22759/16-12-* 12 37 x 28 .084 .089 2.02 .114 ± .003 22.6
M22759/16-10-* 10 37 x 26 .106 .112 1.26 .139 ± .003 35.1
M22759/16-8-* 8 133 x 29 .158 .169 .701 .199 ± .003 63.5
M22759/16-6-* 6 133 x 27 .198 .212 .445 .250 ± .003 99.9
M22759/16-4-* 4 133 x 25 .250 .268 .280 .312 ± .004 157.0
Mandrel Diameter (Inches) (±3%) Test Load (lbs.) (± 3%)
Part No. *
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
Wrap Test 2/
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
M22759/16-20-* .75 1.00 - 2.0 4.0
M22759/16-18-* 1.00 1.25 - 2.0 4.0
M22759/16-16-* 1.00 1.25 - 3.0 5.0
M22759/16-14-* 1.25 2.00 - 2.0 5.0
M22759/16-12-* 2.00 2.00 - 2.0 5.0
M22759/16-10-* 3.00 3.00 - 2.0 5.0
M22759/16-8-* 3.00 4.00 - 3.0 6.0
M22759/16-6-* 4.00 5.00 - 3.0 10.0
M22759/16-4-* 5.00 6.00 - 3.0 10.0
M22759/16-2-* 6.00 8.00 1.25 4.0 15.0
M22759
T R A C K S3
A6Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 42’ to 46’ Description NEG Number
1 Aluminum Base Section NEG-3130-21
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Alumi-Glass 47’ to 52’ Description NEG Number
1 Aluminum Base Section NEG-3130-24
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Detail on Reflective Pattern
ELECTRONIC CROSSING BELL
FEATURESItem Description NEG Number
1 Electronic Crossing Bell NEG-1210EBL
Not Shown 2 Loud Tone Bell (109 DD’s) NEG-1210EBL-L
Not Shown 3 Directional Bell (180 Degree) NEG-1210EBL-D
The tone of the bell is on a microchip and is sounded thru an outdoor speaker. The warning sound is a duplicate of the mechanical bell sound. It utilizes the same electrical leads as the mechanical bell and is positioned on top of the mast pole. The electronic bell meets or exceeds all the arema specifications. The bell circuit draws less than 0.15 amps, which is 10 percent of the current draw of the mechanical bell. Sound reading range of 85 to 95 decibels in a 180 degree plane. 250 strokes per minute. Operating voltage of 10 + - 25 % volts dc . Mounts to a 4 or 5 inch mast pole. There is access to the volume control. Dimensions of bell upon request. Weight is less than 10 pounds.
SIGNAGE
These are some of our railroad crossing signs available.Please contact our sales people for further details and part identification numbers for ordering information
NEG-3350-2 3350-3
NEG-3366NEG-3380H
NEG-3385NEG-3348
A7 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Articulated Gate Arms
Ordering Information
We have had over 20 years experience with ar ticulated gates
and now offer a standard arm for your special requirements.
Articulated gates are used in areas of overhead power lines
and cantilevers that would otherwise obstruct a gate arm in
its upright position. Articulated gates fold at one third the
length as to decrease the vertical position, so the gate does
not get hung up with aforementioned items.
Please use the following parts list to order specific
replacement items for maintenance.
See detailed drawings on following page.
Item Number Section Description Requirements
1 2nd Section NEG 502 - Add Length Plus A.G.T.
2 3rd Section NEG 503 - Add Length Plus A.G.T.
3 Spacer Block 3/4 x 1 1/2 x 4 34 Aluminum Flat 4 Required
4 Extension Plate 1/4 x 4 x 24 Aluminum Flat 2 Required
5 Stop Bar 1/4 x 1 1/2 x 5 Aluminum Flat 1 Required
6 Hinge Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
7 Swivel Plate 1/4 x 6 1/4 x 7 1/8 Aluminum Flat 2 Required
8 Cable Plate 1/8 x 10 x 13 1/2 Steel Plate 2 Required
9 Striker Support 1 1/2 x 4 x 3/16 x 1 1/2 Steel Angle 2 Required
10 Brass Bushing See Detailed Drawing 2 Required
11 Steel Shaft See Detailed Drawing 1 Required
12 Hex Nut 1/2 - 13 Hex Stainless Steel 2 Required
13 Cotton Pin 1/8 x 1 1/2 Stainless Steel 2 Required
14 Hex Head Cap Screw 1/4 - 20 x 3/4 Stainless Steel 6 Required
15 Split Lock Washer 1/4 Stainless Steel 6 Required
16 Internal Lock Washer 5/16 Stainless Steel 24 Required
17 Hex Head Cap Screw 5/16 - 18 x 1 3/4 Stainless Steel 8 Required
18 Hex Head Cap Screw 5/16 - 18 x 1 Stainless Steel 16 Required
19 Hex Head Cap Screw 1/2 - 13 x 3 1/2 Stainless Steel 2 Required
20 Hex Jam Nut 1/2 - 13 Stainless Steel 8 Required
21 Threaded Rod 1/2 - 13 x 3 1/2 Stainless Steel 1 Required
22 Guye Wire Cable Assembly NEG (Length of Gate Arm)
23 Pully System NEG (Length of Gate Arm)
24 Offset Stangent NEG (5 A.G.T. - 10 NEG / 5 A.G.T.-12)
25 Regular Stangent NEG (5 A.G.T. - 5)
*articulate 30% of original length.
D1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Brackets and Mast Extensions
Stub Mast
Item Description NEG Number
1 High Wind Bracket 30” Mouth WIG-191030
2 High Wind Bracket 36” Mouth WIG-191036
3 High Wind Bracket 48” Mouth WIG-191048
4 High Wind Bracket 60” Mouth WIG-191060
5 Drilling Fixture for Mast Extension Installation FIX-EX-121001
Not Shown Mast Extension to Convert Stub Mast to 15 ft. WIG-EX-121000
1
2
3
4
5
WIG-1910060
WIG-1910030
A8Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Articulated Gate Arms
24 - Not in drawin
25 - Drawing upon request
AREMACOMPLIANT
ADJUSTABLE VOLUME
24
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
25
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
A5 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-3130-8
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502B
3 Aluminum 3rd Section NEG-1WCA503B
Alumi-lite 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503B
Insulation - ETFE (Extruded)
ETFE - Ethylene-Tetrafluoroethylebe Coparlymer
“Small Diameter”Tin-Coated Stranded Copper Conductor
E2 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
T R A C K S3
These are some of our railroad crossing signs available. Please contact our sales people for further details and part identification numbers for ordering information.
Signage
A6Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Alumi-Lite “All Aluminum”
High Wind Profile Aluminum Gate Arms
Alumi-lite 42’ to 46’ Description NEG Number
1 Aluminum Base Section NEG-3130-21
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Alumi-Glass 47’ to 52’ Description NEG Number
1 Aluminum Base Section NEG-3130-24
2 Aluminum 2nd Section NEG-1WCA502C
3 Aluminum 3rd Section NEG-1WCA503C
Detail on Reflective Pattern
M22759 - TEFCEL CASE WIRE
MILITARY SPECIFICATIONS
CONSTRUCTION DETAILS (TABLE 1)Diameter of Stranded Conductors (inches) Finished Wire
Part No. * Wire Size
Stranding (Number of Strands) x AWG
Gage of Strands Min. Max
Resistance at 20°C (68°F)
(ohms/1000 ft.) Max
Diameter (Inches)
Weight (lbs./1000 ft.)
Max
M22759/16-20-* 20 19 x 32 .037 .039 9.88 .060 ± .002 5.36
M22759/16-18-* 18 19 x 30 .046 .049 6.23 .071 ± .002 7.89
M22759/16-16-* 16 19 x 29 .052 .055 4.81 .078 ± .002 9.95
M22759/16-14-* 14 19 x 27 .065 .069 3.06 .093 ± .002 14.9
M22759/16-12-* 12 37 x 28 .084 .089 2.02 .114 ± .003 22.6
M22759/16-10-* 10 37 x 26 .106 .112 1.26 .139 ± .003 35.1
M22759/16-8-* 8 133 x 29 .158 .169 .701 .199 ± .003 63.5
M22759/16-6-* 6 133 x 27 .198 .212 .445 .250 ± .003 99.9
M22759/16-4-* 4 133 x 25 .250 .268 .280 .312 ± .004 157.0
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of Specification MIL-W-22759.
Bend Test Mandrels and Test Loads (Table II)Mandrel Diameter (Inches) (±3%) Test Load (lbs.) (± 3%)
Part No. *Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
Wrap Test 2/
Life Cycle Test and Short Term Thermal
Stability Test 1/
Cold Bend Test
M22759/16-20-* .75 1.00 - 2.0 4.0
M22759/16-18-* 1.00 1.25 - 2.0 4.0
M22759/16-16-* 1.00 1.25 - 3.0 5.0
M22759/16-14-* 1.25 2.00 - 2.0 5.0
M22759/16-12-* 2.00 2.00 - 2.0 5.0
M22759/16-10-* 3.00 3.00 - 2.0 5.0
M22759/16-8-* 3.00 4.00 - 3.0 6.0
M22759/16-6-* 4.00 5.00 - 3.0 10.0
M22759/16-4-* 5.00 6.00 - 3.0 10.0
M22759/16-2-* 6.00 8.00 1.25 4.0 15.0
* Part No.: The asterisks in the part number column, Tables I & II, shall be replaced by color code designators in accordance with MIL-STD-681. Examples: Size 20, White - M22759/16-20-9;White with Orange Stripe - M22759/16-20-93
1/ : Also for bend tests after immersion.
2/ : Use mandrel for wire size 2 and larger in “wrap back” test.
RR1 BOND STRAND BARE & INSULATED
ORDERING INFORMATION
Part No. * Size AWG Stranding Cond. Dia (Inch)
Insul. Thick (Inch) Insul. Material Approx O.D.
(Inch) Approx. Net. Wt.
(Lbs./MFT.)
NEG-2045C 6 133 .200 Bare - .200 78
NEG-133564P 6 133 .200 .062 PVC .325 124
NEG-133B464PO 6 133 .200 .062 PVC .325 124
NEG-133464P 6 133 .200 .062 PVC .325 124
NEG-133664P 6 133 .200 .094 .078
PVC Rubber
.390 147
NEG-2048C 6 133 .200 and .062
Neoprene .480 168
APPLICATIONS
CONSTRUCTION
ADVANTAGES
For use in low voltage track circuit applications, NECCO Bond Strand is available both bare and insulated.
A single, tinned over bare cadmium bronze conductor (7 x 19 concentric strands, each 0.0132 inch) with an overall circular mil area of 22,173 can be insulated with either polyvinyl chloride (PVC) or rubber/neoprene.
An extremely flexible, yet rugged cable, our Bond Strand is clean stripping, and the specially tempered cadmium bronze hold its shape while being terminated.
A3 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Profi le - Fiberglass
Detail on Reflective Pattern
High Wind Profile Fiberglass Gate Arms
Fiberglass 16’ to 26’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501B
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Fiberglass 16’ to 33’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501C
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Fiberglass 16’ to 42’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501C
2 Fiberglass 2nd Section NEG-1WC502C
3 Fiberglass 3rd Section NEG-1WC503B
E5Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Insulated Test Links and Terminals / Terminal and Bus Connectors
National Electric Gate Testing Links are utilized for applications to any two post terminal where open or closed circuit tests are needed. The Central Insulated Test Link and Insulated Test Terminals allows open and closed circuit tests to
be made without disturbing connections on either side of the circuit and also provides a convenient means to open and close a circuit for test purposes.
Ordering Information
National Electric Gate Terminal and Bus Connectors are of bright nickel plated copper and are available in a variety of lengths with mounting centers ranging from 1” to 2-3/8”.
Insulated Test Links & Terminals
Terminal & Bus Connectors
4
2
1
3 5 67
Item Part No. Description
1 TW-IM Wrench Terminal Wrench
2 NEG-1SL-1 Offset Insulated Link with Special Nut & Clamp Nut - 1” Centers
3 NEG-1351 Center Control Insulated Test Link - 2 3/8” Mounting Center
4 NEG-872231 Buss Connector (AAR#10763) - 1 1/2” Centers
5 NEG-982238 Buss Connector (AAR#10764) - 2 3/8” Centers
6 NEG-982230 Buss Connector (AAR#10766) - 1” Centers
A4Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Aluminum/Fiberglass
Detail on Reflective Pattern
High Wind Profile Aluminum/Fiberglass Gate Arms
Alumi-Glass 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-1WC3130
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502C
3 Fiberglass 3rd Section NEG-1WC503B
26
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
27
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
INSULATED TEST LINKS AND TERMINALS / TERMINAL AND BUS CONNECTORS
INSULATED TEST LINKS & TERMINALS
TERMINAL & BUS CONNECTORS
National Electric Gate Testing Links are utilized for applications to any two post terminal where open or closed circuit tests are needed. The Central Insulated Test Link and Insulated Test Terminals allows open and closed circuit tests to be made without disturbing connections on either side of the circuit and also provides a convenient means to open and close a circuit for test purposes.
*These items come in a kit and allow you to adapt your tip section to the gate arm of either a second or third section.
ORDERING INFORMATIONItem Part No. Description
1 TW-IM Wrench Terminal Wrench
2 NEG-1SL-1 Offset Insulated Link with Special Nut & Clamp Nut - 1” Centers
3 NEG-1351 Center Control Insulated Test Link - 2 3/8” Mounting Center
4 NEG-872231 Buss Connector (AAR#10763) - 1 1/2” Centers
5 NEG-982238 Buss Connector (AAR#10764) - 2 3/8” Centers
6 NEG-982230 Buss Connector (AAR#10766) - 1” Centers
A3 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
High Wind Profi le - Fiberglass
Detail on Reflective Pattern
High Wind Profile Fiberglass Gate Arms
Fiberglass 16’ to 26’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501B
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Fiberglass 16’ to 33’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501C
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Fiberglass 16’ to 42’ Description NEG Number
1 Fiberglass Base Section NEG-1WC501C
2 Fiberglass 2nd Section NEG-1WC502C
3 Fiberglass 3rd Section NEG-1WC503B
4
2
1
3 5 67
E4 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
RR1 Bond Strand Bare & Insulated
Applications
For use in low voltage track circuit applications, NECCO Bond Strand is available both bare and insulated.
Construction
A single, tinned over bare cadmiumbronze conductor (7 x 19 concentric strands, each 0.0132 inch) with an overall circular mil area of 22,173 can be insulated with either polyvinyl chloride (PVC) or rubber/neoprene.
Advantages
An extremely flexible, yet rugged cable, our Bond Strand is clean stripping, and the specially tempered cadmium bronze hold its shape while being terminated.
Ordering Information
Part No. * Size AWG StrandingCond. Dia
(Inch)Insul. Thick
(Inch)Insul.
Material
Approx O.D.(Inch)
Approx. Net. Wt.
(Lbs./MFT.)
NEG-2045C 6 133 .200 Bare - .200 78
NEG-133564P 6 133 .200 .062 PVC .325 124
NEG-133B464PO
6 133 .200 .062 PVC .325 124
NEG-133464P 6 133 .200 .062 PVC .325 124
NEG-133664P 6 133 .200 .094.078
PVCRubber
.390 147
NEG-2048C 6 133 .200 and.062 Neoprene
.480 168
A4Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
High Wind Profi le - Aluminum/Fiberglass
Detail on Reflective Pattern
High Wind Profile Aluminum/Fiberglass Gate Arms
Alumi-Glass 16’ to 26’ Description NEG Number
1 Aluminum Base Section NEG-1WC3130
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 33’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502B
3 Fiberglass 3rd Section NEG-1WC503B
Alumi-Glass 16’ to 42’ Description NEG Number
1 Aluminum Base Section NEG-3130-16
2 Fiberglass 2nd Section NEG-1WC502C
3 Fiberglass 3rd Section NEG-1WC503B
REPLACEMENT GATE TAPE
HI INTENSITY VERTICAL CUT TAPE (NEW STANDARD
• Replacement Hi Intensity Vertical Striped Gate Tape
• 1 Roll will re-tape roughly 8 complete 16' gate arms (Front and Back)
• Rolls come in the following dimensions: 150'x4'',150'x3'',150'x2''
HI INTENSITY ANGLED CUT TAPE (OLD STANDARD )
• Replacement Hi Intensity Left/Right Angel Striped Tape
• 1 Roll will re-tape roughly 8 complete 16' gate arms (Front and Back)
• Rolls come in the following dimensions: 150'x4'',150'x3'',150'x2''
HI INTENSITY VERTICAL CUT TAPEItem Number Description NEG Number
1 Hi Intensity Vertical 150' x 4'' NEG-150HV-4
2 Hi Intensity Vertical 150' x 3'' NEG-150HV-3
3 Hi Intensity Vertical 150' x 2'' NEG-150HV-2
HI INTENSITY ANGLED CUT TAPEItem Number Description NEG Number
1 Hi Intensity Horizontal Right Angle 150' x 4'' NEG-150H-R-4
2 Hi Intensity Horizontal Right Angle 150' x 3'' NEG-150H-R-3
3 Hi Intensity Horizontal Right Angle 150' x 2'' NEG-150H-R-2
4 Hi Intensity Horizontal Left Angle 150' x 4'' NEG-150H-L-4
5 Hi Intensity Horizontal Left Angle 150' x 3'' NEG-150H-L-3
6 Hi Intensity Horizontal Left Angle 150' x 2'' NEG-150H-L-2
28
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
29
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
CONTACT US
ADDRESS: 252 Pine Barren Road P.O. Box 706 Pooler, GA 31322
PHONE: 912.748.5090
CELL: 912.596.7426
FAX: 912.748.7542
EMAIL: RSass@NationalElectricGate.com RyanSass@NationalElectricGate.com
ABOUT US
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
About Us
Our newest LED’s are interchangeable in the field with incandescents, are constant voltage regulated and work from 4 volts up to 20 volts. AC/DC. Our “Gate-Saver” Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia. 912.748.5090 email: MartyJr@NationalElectricGate.com, RSass@NationalElectricGate.com, or RyanSass@NationalElectricGate.com or fax us at 912.748.7542.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
A1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
Fiberglass Extendable Roadway Arm
Fiberglass Gate Arms 12’ to 38’
12’ to 18’ Description NEG Number
1 Fiberglass Base Section (Designate Length) NEG-501-?
2Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
3Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
4 Hardware Pack NEG-1PK
5 Sleeve (Not Shown) (Designate Length) NEG-?SL
19’ to 38’
1 Fiberglass Base Section 16 Feet NEG-501-16
2 Fiberglass 2nd Section (Designate Length) NEG-502-?
3 Fiberglass 3rd Section (Designante Length to 16 Feet) NEG-503-?
3Retro-Reflective Sheeting - Red Engineer Grade High Intensity
NEG-150NEG-158
4Retro-Reflective Sheeting - White Engineeer Grade High Intensity
NEG-151NEG-159
5 Hardware Pack NEG-2PK
6 Sleeve (Not Shown) (Designate Length) NEG-?SL
*? = indicates length needed per Gate Arm Section
F1 National Electric Gate Company NA
TIO
NAL ELECTRIC G
AT
E C
O.
NA
TIO
NAL ELECTRIC G
AT
E C
O.
About Us
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bondstrand, tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
A2Call: 912.748.5090 Fax: 912.748.7542 Click: www.NationalElectricGate.com
Alumi-Glass Extendable Roadway Arm
Alumi-Glass Gate Arms 18’ to 46’’*
18” to 46’ Description NEG Number
1 Aluminum Base Section 16 Feet NEG-2120
2 Fiberglass 2nd Section (Designate Length to 16 Feet) NEG-502-?
3 Fiberglass 3rd Section (Designate Length to 16 Feet) NEG-503-?
4Retro Refl ective Sheeting Red Engineer Grade High Intensity
NEG-150NEG-158
5Retro Refl ective Sheeting White Engineer Grade High Intensity
NEG-151NEG-159
6Hardware Pack 2 Piece Gate Arm 3 Piece Gate Arm
NEG-2PKNEG-3PK
7 Sleeve (Not Shown) (Designate Length) NEG-?SL
8 Optical Buffer Leg with Bracket (Not Shown) NEG-130B
*? = indicates length needed per Gate Arm Section
National Electric Gate Company is the leading manufacturer of crossing warning protection materials for the past 30 years.
Our products range from all types of gate arms, such as, “Alumi-Glass”, “Alumi-Lite”, “High Wind Profile” to articulated gates, conversion brackets in all configurations, to new digital light sets, LEDs, bus bars, insulated test links, insulated tools, bond-strand, Tefcel case wire, and signage. All our gates use diamond grade, high intensity or engineer grade reflective sheeting per customer specifications. Our fiberglass gates exceed 7400 PSI crush & impact test for extended usage in the field.
Conversion Bracket is the industry leader in saving gate arms in the field. All items are normally available from stock with a short delivery time.
For further information, please call email or fax us at our sales and manufacturing facility in Savannah, Georgia.
30
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
31
Phone: 912.748.5090 | Fax: 912.748.7542 | www.NationalElectricGate.com
NOTES NOTES
top related