multistack world-wide headquarters sparta, wisconsin

MULTISTACK WORLD-WIDE HEADQUARTERS

SPARTA, WISCONSIN

MULTISTACK OVERVIEW

•2009 is the 20th Anniversary for Multistack•Multistack is the recognized world leader in modular chillers•Customer service is the main priority at Multistack. If you need it and we don’t make it, we will try to make it for you•Multistack has a team of service technicians that travel the world for start-ups•Available in individual modules or pre-assembled into arrays on lifting frames•Multistack offers both sales and service schools in our Sparta, Wisconsin facility•In-house test stands for Witness Testing•In-stock standard modules make for very quick shipments for emergency retrofit installations

AHRI CERTIFICATIONAir-Conditioning, Heating, and Refrigeration Institute

Multistack is AHRI Certified and continues to certify products as they are developedAHRI Certification provides real performance dataMultistack has AHRI approved and certified test stands in-house

What are modular chillers and why do you want them in your building?

•Compact Design•Easy Installation—Fits Through Office Door•No Crane Required•Retrofit or Replacement•Built-in Redundancy•Critical Cooling•Future Capacity•Low Maintenance•Low Sound Signature•Stock Availability for Short Lead Time Shipping•Energy Efficiency—Only Run The Modules You Need•Multistack Production Chillers are AHRI Certified

The future of modern building efficiency is modular because… There is nothing more efficient than off

Water-to-Water MS50Air-to-Water ASP30

MULTISTACK MODULES

Multistack is not just about Modular Chillers--2009 brought the introduction of full-size Flooded Units

•Flooded Units available in 90-540 tons•Built to order in wide or tall designs

Theory of Modular Chillers

•Multiple smaller chillers connected in parallel allow array to meet building demands at peak times, but shut down modules when demand is lower. Modules use screw, scroll and centrifugal compressors

•Modular systems can easily be expanded for future building growth

•Redundancy is built-in. No need for a back-up chiller system when you have multiple compressors in parallel

•Installation is easy—individual units fit through office doorways and on elevators. No need for a crane or demolition

•Small footprint, low sound signature, AHRAE 15 compliance and more

•Dedicated Heat Recovery Chillers and Water-to-Water Heat Pumps integrate into arrays

COMPLETE MULTISTACK MODULAR CHILLER ARRAY

•20, 30, 50 and 70-Ton Modules•Chillers from 20 to 600-Tons•410A Scroll Compressors •.740 kW/Ton•As quiet as 60 dB (A)

Scroll Modules

• 70, 90 and 125 Ton Modules• Copeland Screw Compressor• 140 to 1000-ton arrays• .75 kw/ton• Quiet @ 72dB(A)• Currently Available in R-22, with

134A In Design Now

Large Screw Modules

•Magnetic bearings; no oil•IPLV .435 kW/ton •Quieter than background noise•2 A peak current inrush•R-134A refrigerant

Magnetic Levitation TechnologyMagLev™ for Multistack

Flooded Units

• Energy Efficient• MagLev™ Technology• Best Part-Load Efficiency• Industry Leading Control Panel• Available 90-540 Tons

Water-To-Water Heat Pump Chiller

• 20,30, 50 & 70 Ton Modules• Arrays from 20-600 Tons• Single Point Water Connection• Single Point Power Connection• EER’S > 17 at 45 Degrees• COP’S > 4.0 at 120 Degrees

Dedicated Heat Recovery Chiller

• High Temperature Chiller Boiler• Available in 140-, 160- and 180-Degree Modules•Typically Three Times More Efficient Than Gas Boilers•Compatible With High-Temp Hot Water System

Air Cooled Modules

• Split Version of W/C• Remote A/C Condenser• Refrigeration Specialties Installed Within Cabinet Dimensions in Factory Controlled Environment• Same Size as W/C

High Efficiency Air-Cooled 410A

•Scroll Modules Available in 10-, 15-, 20-, 30 and 60-Ton Modules•Industry Leading Efficiency•Incredibly Low Sound Signature•Critical Cooling Applications•Environmentally Responsible Refrigerant•Single Point Control System•MagLev™ Modules available•End-To-End or Side-By-Side •Can Be Packaged To Create Chillers Up To 600-Tons•High-Static Condenser Fans Available

Aero Thermal Air-to-Water Heat Pump

•Three Times Cost Savings Versus Natural Gas•Economically Friendly Upgrade For Two-Pipe Systems•Available in 10-, 15-, 20- and 30-Ton Modules•Cost Reduction By Eliminating Well Drilling

• Minimal refrigerant charge is safer for the environment and less

costly.

• Significantly quieter operation than a full-sized chiller.

• Oil-free refrigerant system means that oil cannot make its way onto

the heat transfer surfaces and degenerate the efficiency of the

system.

• Required electrical startup current for MagLev compressor is just 2

amps versus a full size compressor requiring 500-600 amps.

• A MagLev compressor’s weight is one-third of what a conventional

compressor of similar capacity would be. It requires significantly less

material and energy to manufacture a MagLev compressor, adding

positively to carbon footprint reduction process.

Magnetic Levitation (MagLev) Compressor Highlights

The heart of a Multistack

MagLev Chiller is the

Magnetic Levitation High

Speed Compressor. Capable

of spinning up to 40,000 rpm,

the Multistack control system

allows the compressor to

offer maximum efficiency at

almost any level of building

demand.

Two stage impeller offers exceptional part load efficiency

MagLev™ Compressor Highlights

Built-in computer to constantly monitor

operation and diagnostic systems

•Variable Simultaneous Heating and Cooling•Dramatically Reduces Piping and Electrical Costs•Installed Footprint Meets Architectural Limitations•Fully Expandable Modular System•Multistack Controls Simplify System Operation

Virtual MoveableEnd Cap--VME

Virtual Moveable End Cap (VME)

GEOTHERMAL HEAT PUMP WITH VME TECHNOLOGY

•Simultaneous Chilled and Hot Water•Easy Addition to any Hydronic System•One to Four Year Payback•75% Reduction in CO2 Emissions•10 Tons to 1000 Tons•Hot Water Temps as High as 180°F•Use Heat Created Cooling Your Data To Make Hot Water

DEDICATED HEAT RECOVERY CHILLERS

DHRC

180-Degreee DHRC

CRITICAL COOLING APPLICATIONSAnywhere Redundancy is Required

•Data Centers•Hospitals•Operating Rooms•Industrial Process Applications•Manufacturing Applications•Telecommunications•Pharmaceutical

Multiple Modules in Array Eliminate the Possibility of Single Point FailureN-1 is Always Greater than ZeroN+1 is an Additional Module, Not Another Chiller System

REDUCE INSTALLATION COSTS WITH MODULAR CHILLERS

•Multistack Modules fit Through Standard Doorway•Multistack Modules Designed to Ride Elevator•No Crane Needed for Installation of Individual Modules•Demolition and Construction Avoidance•ASHRAE-15 Compliant Without Costly Mechanical Room Upgrades•Single Point Power and Water Connections Standard

www.multistack.com

Multistack1065 Maple AveSparta, WI 54656(608) 366-2400