μms³ μmodular substrate sampling system μms³ μ modular substrate sampling system

μμMSMS³³ μμ MModular odular SSubstrate ubstrate SSampling ampling SSystemystem

μμMSMS³³ Presentation Presentation

Product Description Building Block Simplicity Building Blocks into

Systems Features & Benefits Specifications Conventional to Modular

Sampling Systems Pricing Structure

μMS³ Product DescriptionProduct Description The μMS³ System…

Designed to maximize efficiency and minimize costs

Developed specifically for the Process Analytical Instrumentation market

Incorporates a single block and tubeset architecture for simplicity

The perfect solution for most gas or liquid sample conditioning systems

One Building Block for all system configurations. Standard Flow Tubesets are pre-welded and allow for

flexibility in system design. Simple building block approach allows for assembly

and/or reassembly into virtually any configuration.

μMS³ Block & Tube ArchitectureBlock & Tube Architecture

Building BlockStandard Flow Tubes

μMS³ Simple Assembly StepsSimple Assembly Steps

From Building Blocks & Tubes to From Building Blocks & Tubes to Sampling SystemSampling System

Assembly RequirementsOne tool, screw type & sealµMS³ blocksµMS³ prefabricated

interconnecting tubesetsµMS³ standoffs.

Step 1 – Determine number of components required for each flow stream. For each flow stream, assemble µMS³ blocks together using #8-32 x 7/16” Socket Head Cap Screws. No seals are required.

From Building Blocks & Tubes to From Building Blocks & Tubes to Sampling System (cont.)Sampling System (cont.)

Step 2 – Based on User’s flow schematic, place seal in block counter bore and attach µMS³ prefabricated tubesets to each manifold block using #8-32 x 7/16” Socket Head Cap Screws.

Step 3 – Based on User’s flow schematic, place seal in block counter bore and assemble µMS³ prefabricated manifold to manifold tubesets to each flow manifold using #8-32 x 7/16” Socket Head Cap Screws.

From Building Blocks & Tubes to From Building Blocks & Tubes to Sampling System (cont.)Sampling System (cont.)

Step 4 – Connect µMS³ standoffs to the bottom of each end of each modular substrate manifold using #8-32 x 7/16” Socket Head Cap Screws.

Step 5 – Based on User’s flow schematic, attach surface mount components to top of modular substrate using #10-32 x 7/16” Socket Head Cap Screws.

Tubed System Flow Schematic

μMS³ Flow Schematic

μMS³ System

NeSSI / SP76 History/StandardsNeSSI / SP76 History/Standards Initially Semiconductor Industry Concept Center for Process Analytical Chemistry

Washington State UniversityNew Sampling / Sensor Initiative (NeSSI)

Ad Hoc group of manufacturers, end users, integrators worked together to improve technology and achieve ‘Smart’ systems.

ANSI / ISA Standard 76.00.02 ( 2002 ) for Industrial and Analytical Application

Conventional Sampling SystemsConventional Sampling Systems

Conventional Sampling SystemsNot SimpleExpensive to MaintainTime Consuming to Design and BuildNo Standardization; all “Black Art Designs”Space ConsumingSize of components yields greater internal

volume

μMS³ Sampling System Sampling System

Modular Sampling SystemSimple / Standard / Small / Smart (Future)Standardization

ANSI / ISA SP76.00.02 ( 2002 )

Ease of MaintenanceLower Internal VolumesExternal Space Savings

μMS³ Pricing The µMS³ system is a ‘build to order” modular solution

with pricing and availability based on customer specific design requirements and strict compliance to

ANSI/ISA 76.00.02 (2002).

Component pricing is as follows: Modular Building Blocks Modular Tubesets ANSI/ISA 76 Surface Mount Components