motorola moto g3 teardown - ifixit-guide · pdf file步骤 1 — motorola moto g3 teardown...

Motorola Moto G3 TeardownHere comes with detailed steps to do Motorola Moto G3 whole teardown/disassembly.

撰写者: Witrigs

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 1 / 10 页

介绍介绍[video: https://www.youtube.com/watch?v=4039WGldia0]

工具工具:Heat Gun (1)

Suction Handle (1)

Guitar Picks (1)

T4 Torx Screwdriver (1)

Tweezers (1)

Spudger (1)

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 2 / 10 页

步骤步骤 1 — Motorola Moto G3 Teardown

Remove back cover.

Moto G3 plastic panel can be easily removed with the fingernails.

步骤步骤 2

Remove camera&flashlight metal cover. Use tweezers to cut strong adhesives underneath.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 3 / 10 页

步骤步骤 3

Undo 3 screws by T4 Torx screwdriver.

Take away plastic securing part.

步骤步骤 4

Heat up the LCD screen for a while.

Then with the help of suction cup, insert guitar picks to open a gap. Slide guitar picks or plasticopening tool to cut strong adhesives.

There is LCD screen connector on the left side, so be careful to slide guitar picks.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 4 / 10 页

步骤步骤 5

Release LCD screen connector firstly.

Remove LCD screen.

步骤步骤 6

Undo 14 screws by T4 Torx screwdriver

Pry up motherboard assembly.

Battery flex connector is connected with motherboard, so be careful to pry the assembly up.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 5 / 10 页

步骤步骤 7

Release battery flex connector.

Separate motherboard assembly from back cover assembly.

步骤步骤 8

Undo 3 screws here.

Use spudger to cut adhesives and pry the SIM&SD card reader board, then remove it.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 6 / 10 页

步骤步骤 9

Remove front-facing camera.

步骤步骤 10

Remove rear camera.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 7 / 10 页

步骤步骤 11

Remove earpiece.

步骤步骤 12

Remove loudspeaker.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 8 / 10 页

步骤步骤 13

Here is the motherboard.

步骤步骤 14

Use spudger to cut adhesive and pry the battery up.

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 9 / 10 页

此文档最后生成于 2017-12-23 12:11:03 AM。

步骤步骤 15

Take away headphone jack.

步骤步骤 16

Done

Motorola Moto G3 Teardown

© iFixit — CC BY-NC-SA zh.iFixit.com 10 / 10 页