metrapp 2019 - meeting.dlut.edu.cnmeeting.dlut.edu.cn/files/20190917/190917_1643642.pdfhe has been...
Post on 27-Oct-2020
1 Views
Preview:
TRANSCRIPT
MeTrApp 2019 5th IFToMM International Conference on
Mechanisms, Transmissions and Applications
Dalian, China
October 9-11, 2019
SCIENTIFIC PROGRAM
1 / 11
MeTrApp 2019
Organized by
School of Mechanical Engineering, Dalian University of Technology
Under the patronage of
International Federation for Promotion of Mechanism and Machine Science
Conference Co-chairs
Delun Wang, Dalian University of Technology, China
Victor Petuya, University of the Basque Country, Spain
Yan Chen, Tianjin University, China
Shudong Yu, Ryerson University, Canada
International Scientific Committee
Martin Bilek, Technical University of Liberec, Czech Republic
Mehmet Ismet Can Dede, Izmir Institute of Technology, Turkey
Marco Ceccarelli, University of Rome Tor Vergata, Italy
Yan Chen, Tianjin University, China
Burkhard Corves, RWTH Aachen University Aachen, Germany
Jian S. Dai, King’s College of London, UK
Xilun Ding, Beihang University, China
Feng Gao, Shanghai Jiaotong University, China
Ashitava Ghosal, Indian Institute of Science, India
Weizhong Guo, Shanghai Jiaotong University, China
Uwe Hanke, Technische Universität Dresden, Germany
Tian Huang, Tianjin University, China
Gökhan Kiper, Izmir Institute of Technology, Turkey
Chin-Hsing Kuo, University of Wollongong, Australia
Wei Lin, Singapore Institute of Manufacturing Technology, Singapore
Erwin-Christian Lovasz, Politechnica University of Timisoara, Romania
J. Michael McCarthy, University of California (Irvine), US
Domenico Mundo, University of Calabria, Italy
Takaaki Oiwa, Shizuoka University, Japan
Victor Petuya, University of the Basque Country, Spain
Giuseppe Quaglia, Politecnico di Torino, Italy
Jaroslaw Szrek, Wroclaw University of Technology, Poland
Yukio Takeda, Tokyo Institute of Technology, Japan
Hidetsugu Terada, University of Yamanashi, Japan
Monica Urízar, University of the Basque Country, Spain
Miroslav Václavík, Research Institute of Textile Machines, Czech Republic
Shudong Yu, Ryerson University, Canada
Xianmin Zhang, South China University of Technology, China
Local Organizing Committee
Guanglei Wu, Dalian University of Technology, China
Zhi Wang, Dalian University of Technology, China
2 / 11
MeTrApp 2019
Conference Venue
The Conference will be held in:
Hi Chance (Dalian) Science and Technology Center, Dalian, China (海创大连科技交流中心)
Address 507 Huang Pu Road
High-Tech Industrial Zone
Dalian, Liaoning Province
116001 China
中国辽宁省大连市高新园区黄浦507号
Tel. (电话):+ 86 (0) 411 6262 0777
http://meeting.dlut.edu.cn/meeting/index_en.asp?id
=2649
Transportation
Dalian has the international airport to connect the international flights from Europe, North
America with a break at Beijing, Shanghai, Guangzhou, etc. The airport also has the direct
flights to Japan and South Korea. Two high-express train stations (Dalian Bei Station and
Dalian Station) connect the Chinese cities via Shenyang.
Transferring from/to conference site (Subway exit at Haishidaxue (海事大学)):
1. Airport: Taxi (35 CNY); No. 2 and 1 subways with change at Xi'an Road Station
2. Dalian Bei Station: Taxi (50 CNY); No. 1 subway
3. Dalian Station: Taxi (30 CNY); No. 2 and 1 subways with change at Xi'an Road Station; No.
531 Bus
DALIAN
Dalian is a financial, shipping and logistics centre for Northeast Asia. Dalian is a popular
destination among domestic tourists and foreign visitors, especially from Japan, South Korea
and Russia. Its mild climate and multiple beaches as well as its importance in the modern
history of China have attracted tourists. Some of the most famous beaches are Jīnshítān
Golden Coast (金石滩黄金海岸) beach, Fùjiāzhuāng (付家庄) beach, Bàngchuídǎo (棒棰岛)
beach, Xīnghǎi Park (星海公园) beach, Xīnghǎi Bay (星海湾) beach, and Xiàjiāhézi (夏家河子)
beach. It was one of the three cities named "China's best tourist city", along with Hangzhou
and Chengdu, recognized by the National Tourism Administration and the United Nations
World Tourism Organization.
Plenary Session: 15 min. Presentation + 5 min. Discussion
3 / 11
MeTrApp 2019
Program at a Glance
Onsite registration from 16:00 on October 8 2019
October 9 2019
8:00-8:30 Registration
8:30-8:50 Opening Ceremony
8:50-9:35 Keynote Speaker 1: Prof. Feng Gao
9:35-10:20 Keynote Speaker 2: Prof. Xianmin Zhang
10:20-10:50 Group photo, Coffee break
10.50-12.10 Engineering Applications I Robots and Mechatronics I
12:10-13:30 Lunch
13:30-15:10 Linkage Synthesis Parallel Manipulators I
15:10-15:30 Coffee break
15:30-17:30 Lab. visiting
18:30-21:30 Reception
October 10 2019
8:30-9:50 Compliant Mechanism Machinery Dynamics
9:50-10:10 Coffee break
10:10-11:50 Control Application Robots and Mechatronics II
11:50-13:30 Lunch
13:30-14:30 Poster session EC meeting
14:30-18:00 Sightseeing tour
18:30-21:30 Banquet
October 11 2019
8:30-10:10 Engineering Applications II Mechanical Transmission
10:10-10:30 Coffee break
10:30-11:50 Parallel Manipulators II Robots and Mechatronics III
11.50-13.30 Lunch
13.30-15.10 Education on Theory of Machines and Mechanisms
15.10-15.30 Farewell
4 / 11
MeTrApp 2019
Keynote Speech 1
Supper Large Parallel Robots for Ground-based Simulation of
Space Collision and Docking Dynamic Process
Abstract
The dynamic collisions are the typical physical phenomena for spacecraft rendezvous and
docking, space robot operation, interplanetary spacecraft landing, rocket landing, and so
on. The ground-based simulation equipment of the real space collision and operation
dynamic process is the foundation of development of the space operation systems mentioned
above. This speech will introduce the research on both mechanism design and real time control
of the supper large parallel robots for the ground-based simulation equipment of the real space
collision and operation dynamic process, which is the ground-based semi-physical simulator of
space collision and operation dynamic process. The main contents are the key science and
technological issues, including the design of the supper large 9-DOF parallel robots for the space
collision and operation dynamic semi-physical simulator, the equipment dynamics parameter
matching (e.g., stiffness, mode and frequency), distortion modeling and compensation methods
of the semi-physical simulation system, and real-time control system and control algorithms
and so on. The supper large 9-DOF parallel robots developed by us is the one that cannot be
replaced for the simulation of space collision and operation dynamic process as well as the
verification of the effectiveness and feasibility of the docking and operation mechanisms in
China's Manned Spaceflight, space station project, and so on.
Bibliography
Feng Gao is a Chair Professor at the Shanghai Jiao Tong
University. He earned his Ph.D. in mechanical engineering at
Beijing University of Aeronautics and Astronautics in 1991, and
his Master in Mechanical Engineering at Northeast Heavy
Machinery Institute in 1982. From 1995 to 1997, he was a
postdoctoral research associate in the School of Engineering
Science at Simon Fraser University. He was a full professor at
Yanshan University from 1995 to 1999. He served first as Vice
President and then as President of Hebei University of
Technology from 2000 to 2004. He served as the director of the
State Key Laboratory of Mechanical Systems and Vibration at
Shanghai Jiao Tong University from 2008 to 2013. Since 2004, he
has been a full professor at Shanghai Jiao Tong University.
He has been serving as an Associate Editor of Mechanism and Machine Theory since 2008
and the ASME Journal of Mechanical Design since 2012, and the General Member of the ASME
Mechanisms and Robotics Committee since 2012. He gave the Keynote Speeches on the
conferences of the ASME 2012 and IFToMM 2015, respectively. He won the 2013 China
National Natural Science Award because of his contributions in parallel mechanism design and
the 8 items of awards from the provincial science and technology invention prizes in China. And
he won the ASME Leonardo Da Vinci Award for his invention of parallel manipulators in USA
in 2014. He has been granted 120 patents and has published 3 research books on mechanisms
and robotics, as well as 120 papers in international journals.
5 / 11
MeTrApp 2019
Keynote Speech 2
Origami-inspired Compliant Mechanisms
Abstract
Origami is an ancient art of paper folding. In the field of engineering, many deployable
structures, metamorphic mechanisms and compliant mechanisms are inspired from it. On
one hand, the kinematic motions of rigid origami can be mapped to the rigid mechanisms
isomorphically. Origami providing convenient design thought for the complex spatial
mechanisms. On the other hand, the potential energy of actual origami can also reflect
some characteristics of the compliant mechanisms, such as the multistable performances
and underactuated behaviors. Inspired from the origami-kaleidocycles, we have proposed a
kind of multi-DOF compliant mechanisms with multistability. The mechanisms can not
only inherit the continuous rotation of origami-kaleidocycles but also present the
underactuated kinematic motions. In this presentation, a novel flexural lamina emergent
spatial(LES) joint is also proposed to simplify the manufacturing process of the origami
kaleidocycles inspired compliant mechanisms. Since the LES joint can be considered as a
kind of nonstandard hook hinge, it provides new possibilities for the design of more complex
spatial compliant mechanisms, including Delta mechanisms and Spherical mechanisms.
Bibliography
Prof. Xianmin Zhang received the Ph.D. degree in
mechanical engineering from the Beijing University of
Aeronautics and Astronautics, Beijing, China, in 1993. He
has been the Director of the Guangdong Provincial Key
Laboratory of Precision Equipment and Manufacturing
Technology since 2010, and has been the Dean and the
Chair Professor with the School of Mechanical and
Automotive Engineering, South China University of
Technology since 2013. His research interests include
robotics, analysis and design of compliant mechanisms,
dynamics and vibration control of mechanisms. He has
finished more than 50 projects and authored or
coauthored more than 400 technical papers and more
than 100 patents. Dr. Zhang has been serving as the Chair
of China Committee of the International Federation for
the Promotion of Mechanism and Machine Science since
June 2016.
6 / 11
MeTrApp 2019
Wednesday 09/10/2019
8:00-8:30 Registration
8:30-8:50 Opening Ceremony
Welcome by Prof. Yongqing Wang, Dean of School of Mech. Eng. (DUT)
Welcome for MeTrApp 2019 by Prof. Delun Wang, Conference Chair
8.50-9:35 Keynote speech (Room-Songheting) Chairman: Victor Petuya
Supper Large Parallel Robots for Ground-based Simulation of Space Collision and
Docking Dynamic Process, Prof. Feng Gao
9:35-10:20 Keynote speech (Room-Songheting) Chairman: Hidetsugu Terada
Origami-inspired Compliant Mechanisms, Prof. Xianmin Zhang
10:20-10:50 Group photo, Coffee break
10:50-12:10 Engineering Applications I (Room-Zhongguancun)
Co-chairs: Zhi Wang, Guoguang Jin
10:50-11:10 Kinematics Analysis and Dynamics Simulation Optimization of Lower Limb
Rehabilitation Robot for the Stroke
Li Dong, Lu Li, and Shouqi Chen
11:10-11:30 Simulation analysis on key mechanisms of the automatic tobacco harvester
based on ADAMS
Jie Yu, Jinkui Chu, and Yang Li
11:30-11:50 Design and Analysis of a Novel Primary and Secondary Embedded Deployable
Offshore Cage
Zi-Yu Liu, Lu-Bin Hang, Le-Le Bai, Xiao-Bo Huang, Peng-Cheng Zhang, Su-Long Li,
Shi-Sen Lin, Jun-Rong Chen, and Ming-Yuan Wang
11:50-12:10 An active/passive joint for reconfiguration applications
Mykhailo Riabtsev, Victor Petuya, Aitor Riera, and Mónica Urízar
10:50-12:10 Robots and Mechatronics I (Room-Songheting)
Co-chairs: Yuan Chen, Dong Liang
10:50-11:10 Dimensional Synthesis for the Chang’e-Type Legged Mobile Lander Based on
Performance Atlas
Youcheng Han and Weizhong Guo
11:10-11:30 Kinematic Modeling and Simulation of a Leg-wheel Robot for Unexplored Rough
Terrain Environment
Xu Cai, Jun He, and Feng Gao
11:30-11:50 Four-legged robot mechanism design and leg kinematics analysis
G. M. Wang, G. Y. Ma, Y. L. Yao, and R. C. Liu
11:50-12:10 Optimization Design and Analysis of an Adaptive Variable Magnetic Adsorption
Climbing Robot
Denghui Guo and Yuan Chen
7 / 11
MeTrApp 2019
12:10-13:30 Lunch
13:30-15:10 Linkage Synthesis (Room-Zhongguancun)
Co-chairs: Gökhan Kiper, Xiangyun Li
13:30-13:50 Optimized design of an RSSR mechanism for an unpowered assistive aid
Juewei He, Guangshun Liang, Zhi Lan, and Zhixiu Hao
13:50-14:10 Kinematic Acquisition of Quadratic Curve Constraints for Finite Position
Generation of Planar Mechanisms
Hao Lv, Ke Shi, and Xiangyun Li
14:10-14:30 Dimensional synthesis of non-periodic function generation of a spatial RSSR
mechanism using a numerical atlas method
Wenrui Liu, Jianwei Sun, and Jinkui Chu
14:30-14:50 Path Synthesis of Crank-Rocker Mechanism Using Fourier Descriptors Based
Neural Network
Xiaojuan Mo, Wenjie Ge, Donglai Zhao, and Yaqing Zhang
14:50-15:10 Function Generation Synthesis with Planar 4-bar Linkage as a Mixed Problem of
Correlation of Crank Angles and Dead-Center Design
Gökhan Kiper and Melih Erez
13:30-15:10 Parallel Manipulators I (Room-Songheting)
Co-chairs: Guanglei Wu, Yanbin Zhang
13:30-13:50 Kinematics and Dynamics Simulation Analysis of a 3-DOF Parallel Mechanism for
Application in Hybrid Machine
Haiqiang Zhang, Hairong Fang, Dan Zhang, Xueling Luo, and Fuqun Zhao
13:50-14:10 Kinematics and Singularity Analysis of a Novel Uncoupled 2-DOF Rotational
Parallel Mechanism
Keming Wang, Yanbin Zhang, and Xianling Jing
14:10-14:30 Performance analysis and comparison of three planar parallel manipulators
Xiaoyong Wu, Ran Yan, Zhaowei Xiang, Fangyan Zheng, and Rulong Tan
14:30-14:50 Singularity Loci of a New Four-limb Parallel Schönflies-Motion Generator
Guanglei Wu, Huiping Shen, Wenkang Zhao, and Zirong Lin
14:50-15:10 Kinematics and Multi-mode Application of a novel self-assembling robot with
parallel structure
Fuqun Zhao, Sheng Guo, Xiangyang Wang, and Majun Song
15:10-15:30 Coffee break
15:30-17:30 Lab. visiting
18:30-21:30 Reception
8 / 11
MeTrApp 2019
Thursday 10/10/2019
8:30-9:50 Compliant Mechanism (Room-Zhongguancun)
Co-chairs: Haiyang Li, Fan Zhang
8:30-8:50 Design of a Controlled-stiffness Flexure Mechanism Based on the Fact Method
Kaiyu Wu, Fan Zhang, Minhua Zheng, Hecheng Li, and Jing Sun
8:50-9:10 Modelling and Prediction of Lifetime of Metal Rubber Isolator under Random
Vibration
Hongrui Ao, Yong Ma, Xianbiao Wang, and Hongyuan Jiang
9:10-9:30 Compliant Mechanism based Backbones for Continuous Manipulators and Robots
Haiyang Li, Qiaoling Meng, Guangbo Hao, Shujun Li, Yunpeng Gong, and Yong Zhao
9:30-9:50 A Recursive Integral-Based Dynamic Stiffness Matrix for Notch Flexure Hinges
Using in Compliant Mechanisms
Mingxiang Ling
8:30-9:50 Machinery Dynamics (Room-Songheting)
Co-chairs: Huimin Dong, Yutao Yan
8:30-8:50 A directly coupled finite element – meshless method with varying dilation
parameter
Yaqing Zhang, Wenjie Ge, Ziang Zhang, Xiaojuan Mo, and Yonghong Zhang
8:50-9:10 A New Dynamic Model to Predict Vibration of Cylindrical Roller Bearings with
Clearance and Off-sized Roller Defects
Huimin Dong, Kui Zhang, and Chu Zhang
9:10-9:30 The Analysis for Stress Intensity Factor of Three-Dimensional Crack under
Combined Action of Friction Force and Tension
Yutao Yan, Yibo Zhang, Xin Wu, and Wendong Li
9:30-9:50 Numerical Simulations of the Dynamic Pressure Oil-Gas Separator
Yutao Yan, Yao Yu, Zhili Sun, and Xulei Su
9:50-10:10 Coffee break
10:10-11:50 Control Application (Room-Songheting)
Co-chairs: Jin Xie, Xiaoyan Yu
10:10-10:30 Passivity-based Force/Position Active Disturbance Rejection Control of Dual-arm
Space Robot Clamping Capture Spacecraft
Ai Haiping, Chen Li, and Yu Xiaoyan
10:30-11:50 Motion Planning of a 5-DOF Anthropomorphic Robotic Arm under ROS
Environment
Sida Zhang, Zirong Lin, and Guanglei Wu
11:50-11:10 Terminal Sliding Mode Adaptive Fuzzy Controller of A Free-floating Space
Manipulator Based on Time Delay Estimation
Jianyu Zhang, Xiaoyan Yu, and Li Chen
11:10-11:30 T-S Fuzzy Compensation Based Sliding Mode Control for a Free-floating Space
Manipulator
9 / 11
MeTrApp 2019
Zihao Chen, Xiaoyan Yu, and Li Chen
11:30-11:50 Controlling Strategy of Rail Grinding Mechanism for the Constant Working Power
Jin Xie, Zhongqing Yi, and Zhaohui Liu
10:10-11:50 Robots and Mechatronics II (Room-Zhongguancun)
Co-chairs: Wei Wang, Koji Makino
10:10-10:30 Study on the Development of Toner Xerography Digital Printing Technology
Gaosheng He and Yan Li
10:30-10:50 Research on Knowledge Template Technology for Body Design of Transfer Robot
Wei Wang, Wenlin Gao, and Hongmin Yu
10:50-11:10 Development of Conductive Hydrogel Driven Dielectric Elastomer
Xiaoru Niu, Jianzhong Shang, Zirong Luo, and Tao Jiang
11:10-11:30 Development of Robotic Wiping System for Piezo Components
Lulu Chu, Yi Luo, and Xiaodong Wang
11:30-11:50 Position and Pose Optimization of Work Piece Based on Image Processing Data
Feng Qian, Sichen Cai, and Huimin Dong
11:50-13:30 Lunch
13.30-14:30 Poster session (Room-Songheting)
Project-Oriented Learning/Teaching Applied to Theory of Mechanisms and
Machines
Guanglei Wu, Delun Wang, Huimin Dong, Yuan Gao, and Feng Qian
APP Based Teaching/Learning Mode and Quality Evaluation of MMT Course
Huimin Dong, Delun Wang, Yuan Gao, Feng Qian, and Guanglei Wu
Experimental Study on Mechanical System Dynamics Performance
Yuan Gao, Hong Zhang, Delun Wang, Huimin Dong, and Cong Chen
U-Joint Induced Torsional Instabilities of a Family of 3-DOF Partially-Decoupled
Spherical Parallel Manipulators
Guanglei Wu and Stéphane Caro
13.30-14:30 TC meeting, Chaired by Prof. Delun Wang (Room-Zhongguancun)
14.30-18.00 Sightseeing tour
18:30-21:30 Banquet
10 / 11
MeTrApp 2019
Friday 11/10/2019
8:30-10:10 Engineering Applications II (Room-Songheting)
Co-chairs: Erwin-Christian Lovasz, Guangying Ma
8:30-8:50 A Configuration Synthesis Method of Deployable Mechanism Cellulars Used for
Large Supporting Structures in Space
Chenhan Guang, Zilu Chen, and Yang Yang
8:50-9:10 Parameter Analysis and Optimal Design of Energy Storage Device for Non-Powered
Walking Aid
Fanyu Meng, Wenxiang Zhao, Rui Wang, and Zhixiu Hao
9:10-9:30 The design and analysis of Autonomous Underwater Pipeline Inspection Robots
Fujie Yu and Yuan Chen
9:30-9:50 Novel Solution for the Mechanism Used in the Actuation of Intelligent Roof
Windows
Carmen Sticlaru, Petrisor Laurentiu Tuca, Erwin-Christian Lovasz, Corina-Mihaela Gruescu,
Inocenţiu Maniu, and Cristian Emil Moldovan
9:50-10:10 Design and kinematic analysis of a novel wire-driven spherical scissors mechanism
for shoulder rehabilitation
Ruiqin Li, Ziwei Liu, Wenbo Mi, Shaoping Bai, and Jianwei Zhang
8:30-10:10 Mechanical Transmission (Room-Zhongguancun)
Co-chairs: Ligang Yao, Yongqiang Zhao
8:30-8:50 Contact analysis for spiral bevel gear based on machine parameters
Yongqiang Zhao, Xiangyang Liu, and Ming Liu
8:50-9:10 Transmission design and experimental research of a non-contact nutation reducer
Jiaxin Ding, Ligang Yao, Yongwu Cai, Xiaqi Shan, and Jun Zhang
9:10-9:30 Modal Analysis of Nutation Drive with Double Circular Arc Spiral Bevel Gear
Simin Ouyang, Ligang Yao, Yongwu Cai, Jun Zhang, and Zhiyu Xie
9:30-9:50 Releasable Locking Mechanism using Friction and a Cuneus for Holding Posture
Koji Makino, Tatsuya Kaneko, Kenji Matsumura, and Hidetsugu Terada
9:50-10:10 Optimization Design of Flange Bolt Set Connection under Complicated Working
Conditions
Huimin Dong, Jing Wang, and Delun Wang
10:10-10:30 Coffee break
10:30-11:50 Parallel Manipulators II (Room-Songheting)
Co-chairs: Xiaoyong Wu, Huiping Shen
10:30-10:50 Design and analysis of a new 5-DOF hybrid serial-parallel manipulator
Yundou Xu, Zhenghe Xu, Fan Yang, Youen Mei, Yi Yue, Yulin Zhou, Jiantao Yao, and
Yongsheng Zhao
10:50-11:10 Kinematics research of chewing robot based on six-axis parallel mechanism
Xingyu Zhou and Jinghu Yu
11:10-11:30 Dynamic Model and Simulation Analysis of a 3-DOF Parallel Mechanism
11 / 11
MeTrApp 2019
Jiaxun Li, Jian Liu, Hongjuan Hou, and Liyong Huang
11:30-11:50 Conceptual Design of a 2-DoF Planar High-Speed Industrial Parallel Manipulator Emre Uzunoğ lu, Merve Özkahya, Erkan Paksoy, Barış Taner, M. İ . Can Dede, and Gökhan
Kiper
10:30-11:50 Robots and Mechatronics III (Room-Zhongguancun)
Co-chairs: Inocenţiu Maniu, Ruiqin Li
10:30-10:50 Kinematics Analysis and Reconfiguration Planning of The Reconfigurable Robot
Bin Ye, Feng Gao, and Weixing Chen
10:50-11:10 Kangaroo-inspired jumping robot with controllable takeoff
Yonghong Zhang, Sizhe Liu, Lei Zheng, Xiaojuan Mo, and Wenjie Ge
11:10-11:30 Hydrodynamic coefficients calculation of complex-shaped AUV based on lattice
Boltzmann method
Yinpo Yan and Yuan Chen
11:30-11:50 The design of a kind of two-joint mechanical fish
Hui-hui You, Chang-tang You, Xiao-yan Yu, Chang-ling Zhang, and Kai-long Wang
11.50-13.30 Lunch
13.30-15.30 Education on Theory of Mechanisms and Machines (Room-Songheting)
Co-chairs: Weizhong Guo, Yuan Gao
13.30-13.50 Construction of Golden Course Group for the Innovative Talent Cultivation in New
Engineering of Machinery
Kedong Bi, Yajing Kan, Ruiming Qian, Guodong Yin, and Zhonghua Ni
13.50-14.10 Exploration and Practice of Project-based Teaching in the Course Theory of
Machine Design and Mechanism
Yuanxiong Cheng, Jiajun Yang, Jianfeng Xu, and Kuanmin Mao
14.10-14.30 Project-based Teaching Skills for University Course of Mechanism and Machine
Science
Weizhong Guo
14.30-14.50 An Approach to Foster Student Creative Thinking Ability in the Lectures of
Mechanical Principles
Yunpeng Gong, Shujun Li, Zhang Yu, Haiyang Li, Cuiling Li, and Yu Guo
14.50-15.10 Farewell
top related