master flame fire pit screens, fire grates, all-steel fire
Post on 16-Mar-2022
20 Views
Preview:
TRANSCRIPT
Master Flame Fire Pit Screens, Fire Grates, All-Steel Fire Pits, Gas Log and Burner Sets
800-642-7254
Catalog MSRP
2021-2022
NEW Low Profile Hinged Square Screen
Made in the USA
Master Flame™ Fire Pit Safety Screen
Helps prevent accidents, contains incendiary sparks, ash and soot. Two hingeddoors (panels with decorative handle) allow access and simple fire management.
• Available in welded carbon steel, stainless steel or hybrid (Refer to chart on page 8.)
• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch;
23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied,
weather-resistant black finish
Twin Access Panels
HINGED ROUNDSafety Screen
HINGED ROUND (TWIN DOORS)
24” THRU 29”MSRP
30” THRU 35”MSRP
36” THRU 41”MSRP
42” THRU 47”MSRP
48” THRU 52”MSRP
53” THRU 60”MSRP
OVER 60”
CS* $684 $847 $871 $907 $949 $1243 Call for quote
HYBRID* $721 $871 $929 $985 $1052 $1395 Call for quote
304 SS* $937 $1135 $1160 $1202 $1247 $1695 Call for quote
TWIN ACCESS FIRE PIT SCREEN
How to determine screen size to order from Master Flame Dealer• For Round: Measure pit inside diameter and add 4”.
Round Hinged Fire Pit Screen Sizing: 24” to 60” Diameter• Height is approximately 17” unless specified• Over 40” diameter includes reinforced bracing strap on bottom rail• OVER 60”: Call for quote.• Custom mounting tabs available
NOTE: Screen Heightis approximately 17”
unless specified.
Both Hinged Access Doors Open
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)
2Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
Dome-Shaped Fire Pit
Screen (Poker Required)
Safety Screen
LIFT OFF DOME
24” THRU 29”MSRP
30” THRU 35”MSRP
36” THRU 41”MSRP
42” THRU 47”MSRP
48” THRU 52”MSRP
53” THRU 60”MSRP
OVER 60”
CS $324 $385 $452 $487 $561 $880 Call for quote
HYBRID $367 $434 $522 $578 $654 $1026 Call for quote
304 SS* $544 $648 $684 $709 $782 $1259 Call for quote
NOTE: Screen Height
is approximately 17” unless specified.
Lift Off Dome
LIFT OFF DOME FIRE PIT SCREEN
How to determine screen size to order from Master Flame Dealer• For Round: Measure pit inside diameter and add 4”.
Master Flame™ Fire Pit Safety Screen
• Available in welded carbon steel, stainless steel or hybrid (Refer to chart on page 8.)
• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch;
23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant
electrostatically applied, weather-resistant black finish
LIFT OFF DOME
Round Dome Fire Pit Screen Sizing: 24” to 60” Diameter
• Height is approximately 17”• OVER 60”: Call for quote.• Custom mounting tabs available
Helps prevent accidents, contains incendiary sparks,ash and soot. Lift off screen to tend fire (poker requiredwhen hot).
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGESingle Door Hinged Access Option - $175 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)
1 ALL UNITS BLACK FINISHRETAIL PRICE LIST
Effective May 1, 2021
Single Hinged AccessPanel Option AvailableMaster Flame™
Outdoor Fire Pit Safety Screens
Custom Mounting Tabsavailable for Fire Bowl FirePits - $25 UPCHARGE.
Safety Screen
HINGED (SINGLE DOOR)
17” HeightTOTAL PERIMETER
Up to 120” MSRP
17” HeightTOTAL PERIMETERFrom 121 up to 144”
MSRP
17” HeightTOTAL PERIMETER
From 145 to 192”MSRP
TOTAL PERIMETER192”+
per inch ADDERAdd to 192” MSRP
CS* $794 $952 $1089 $10HYBRID* $907 $1060 $1259 $15304 SS* $1015 $1219 $1417 $20
HINGED SQUARE / RECTANGLE
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEExample: Carbon Steel 30” x 30” hinged square = $742,304 SS 45” x 45” hinged square = $1325, Hybrid 32” x 50” hingedrectangle = $1177
Hinged Rectangle Model
SINGLE ACCESS FIRE PIT SCREEN
• Available in welded carbon steel, stainless steel or hybrid (Refer to chart on page 8.)
• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied, weather-resistant black finish
Square / Rectangular Fire Pit Screen Sizing: TOTAL PERIMETER (Length + Width x 2)
Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged frontdoor (panel with handle) opens up for access and simple fire management.
Master Flame™ Square / Rectangular Fire Pit Safety Screen
• Two handles on bottom sides and one handle on door • Height is 17” unless specified• Over 191” Perimeter, Use “per inch” adder.• Custom mounting tabs available
Single AccessPanel
How to determine screen size to order from Master Flame Dealer• For Square/Rectangle: Add 2” to inside pit dimensions (2” to length and 2” to width).
NOTE: Screen Height is approximately
17” unless specified.
Safety Screen
HINGED (SINGLE DOOR)
12” Height
24” to 30” SQUAREMSRP
12” Height
From 31” up to 36” SQUAREMSRP
12” Height
From 37” to 48” SQUAREMSRP
OVER 48” Square48”+
per inch ADDERAdd to 48” square MSRP
CS* $794 $952 $1089 $40HYBRID* $907 $1060 $1259 $60304 SS* $1015 $1219 $1417 $80
LOW PROFILE HINGED SQUARE
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEExample: Carbon Steel 30” x 30” hinged square = $742,304 SS 45” x 45” hinged square = $1417, Hybrid 50” x 50” hingedsquare = $1379
Low Profile Brushed Finish
SINGLE ACCESS FIRE PIT SCREEN
• Available in welded carbon steel, stainless steel or hybrid (Refer to chart on page 8.)
• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied, weather-resistant black finish
Not Available in Rectangular Sizes
Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged frontdoor (panel with handle) opens up for access and simple fire management.
Master Flame™ Low Profile Square Fire Pit Safety Screen
Single AccessPanel
• Handle on top and handle on door• Height is 12” unless specified• Over 191” Perimeter, Use “per inch” adder.• Custom mounting tabs available
How to determine screen size to order from Master Flame Dealer• For Square Screen: Add 2” to inside pit dimensions (2” to length and 2” to width).
NOTE: Screen Height is approximately
12” unless specified.
4Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
ALL UNITS BLACK FINISH3 RETAIL PRICE LIST
Effective May 1, 2021
NEW LOW PROFILESquare Fire Pit Screen
NOTE: ScreenHeight is equal to1/2 the diameter.
• Available in welded carbon steel, stainless steel or hybrid(Refer to chart on page 8.)
• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire;
64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied,weather-resistant
black finish
Safety Screen
PIVOT ROUND
24” THRU 29”MSRP
30” THRU 35”MSRP
36” THRU 41”MSRP
42” THRU 47”MSRP
48” THRU 52”MSRP
53” THRU 60”MSRP
OVER 60”
CS* $360 $431 $511 $526 $715 $1049 Call for quote
HYBRID* $402 $486 $612 $635 $846 $1239 Call for quote
304 SS* $581 $697 $786 $812 $1000 $1503 Call for quote
Master Flame™ Fire Pit Safety Screen Round Pivot Fire Pit Screen Sizing:
24” to 60” Diameter• Height is proportional (1/2 of diameter)• All screens up to 47” diameter are 4 panel• All screens over 48” diameter are 8 panel• OVER 60”: Call for Quote.• Custom mounting tabs available
Add Clamps and Stop Tabs for
Fire Bowl Pivot Screen Installation• Bowl Clamps welded to screen• 2 Stop Tabs welded to inside of screen
PIVOT ROUND
PIVOT ACCESS FIRE PIT SCREEN
1/4” x 1” Bar
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)
How to determine screen size to order from Master Flame Dealer• For Round: Measure pit inside diameter and add 4”.
STANDARDBLACK FINISH
OPTIONALHYBRID
STANDARDCARBON STEEL
OPTIONALSTAINLESS STEEL
Helps prevent accidents, contains incendiary sparks, ash andsoot. Open either side of the clamshell styled pivot screen foraccess and simple fire management.
Framework 304 Stainless Carbon Steel Carbon SteelMesh Stainless Steel Stainless Steel Carbon Steel
Hardware Stainless Steel Stainless Steel Stainless Steel
5 6Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
ALL UNITS BLACK FINISHRETAIL PRICE LIST
Effective May 1, 2021
Clamps and Stops for Mounting Pivot Screento Fire Pit Bowl - $25 UPCHARGE.
Master Flame™Outdoor Fire Pit SafetyScreens
Pivot
Pivot ScreenRight Side Open
For Larger or Customized Screensand Grates, see Back Cover
Pivot ScreenLeft Side Open
Spark Arresting 8 x 8 per inch 23 Gauge Steel Wire Mesh
FIRE PIT GRATE
ROUND
24”MSRP
27” MSRP
30”MSRP
33”MSRP
36”MSRP
38”MSRP
Over 38” per inchADDER
to 38” MSRP5/8” CARBON STEEL $191 $210 $239 $274 $350 $440 $15
5/8” STAINLESS STEEL $612 $612 $771 $828 $880 $936 $30
CHAR-GUARD
Ember Catch Option
24” GrateAdder
to MSRP
27” GrateAdder
to MSRP
30” GrateAdder
to MSRP
33” GrateAdder
to MSRP
36” GrateAdder
to MSRP
38” GrateAdder
to MSRP
Over 38”Adder
to MSRP$36 $42 $52 $67 $100 $100 $100
Approx. Weight of Grate: 43 lbs 54 lbs 64 lbs 70 lbs 77 lbs 82 lbs
Round FireGrate
• Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock
• Standard Sizes - Tip to Tip (Tine): 38”, 36”, 33, ”30”, 27”, 24”
• 4” standard leg height; 4” standard tine height(8” floor to top of tine)
• Optional Char-Guard Ember Catch
5/8”Bar
Round Fire Grate with Char-Guard Ember Catch
Master Flame™ Round Fire Pit Grate
Round grate shape is ideal for campfires, fire pits or cornerwood-burning fireplaces. Master Flame grates are a greatupdate for old cast iron grates.
WELDED STEEL FIRE PIT GRATES
Master Flame™Outdoor Fire Pit Grates
FIRE PIT GRATE
SQUARE
24”x24”MSRP
27”x27” MSRP
30”x30”MSRP
33”x33”MSRP
36”x36”MSRP
38x38””MSRP
Over 38” per inchADDER
to 38” MSRP5/8” CARBON STEEL $197 $216 $239 $280 $350 $420 $15
5/8” STAINLESS STEEL $612 $660 $760 $937 $930 $963 $30
CHAR-GUARD
Ember Catch Option
24” GrateAdder
to MSRP
27” GrateAdder
to MSRP
30” GrateAdder
to MSRP
33” GrateAdder
to MSRP
36” GrateAdder
to MSRP
38” GrateAdder
to MSRP
Over 38”Adder
to MSRP$36 $42 $52 $67 $100 $100 $100
• Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock
• Square Sizes - 24” x 24”, 27” x 27”, 30” x 30”,36” x 36”, 38” x 38”
• 4” legs for optimal air circulation (longer or shorter legs available for $10 UPCHARGE)
• Optional Char-Guard Ember Catch
SQUARE GRATES
5/8”Bar
Master Flame™ SquareFire Pit Grate
For square fire pits, these fire grates are weld steelbar design. Master Flame grates are a great updatefor old cast iron grates.
Char-Guard Models
Char-Guard Option improves complete burn consistency, simplifies ash clean-up and allows youthe choice of using charcoal. Char-Guard is heavy duty expanded metal fitted and welded to the underside of the grate.
Char-Guard Models
Char-Guard Option improves complete burn consistency, simplifiesash clean-up and allows you the choiceof using charcoal.Char-Guard is heavyduty expanded metalfitted and welded tothe underside of thegrate.
Approx. Weight of Grate: 45 lbs 56 lbs 66 lbs 72 lbs 79 lbs 89 lbs
Square Fire Grate with Char-Guard Ember Catch
SquareGrate
7 8Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
Brushed Finish Available for Stainless Steel Models - $75 UPCHARGE
The TeePee Grate allows kindling or firewood to be leaned up against itself in a tepee shaped cone or pyramid. As thewood burns and falls into the middle it willcreate a "core of heat" of hot wood embers.
TEEPEE
GRATE
MSRPAbout 15 lbs
5/8” Carbon Steel
$95• Welded 5/8" carbon steel bar stock• 17" Tall (Top to bottom)
TeePee FIRE GRATE 15-1/4”
17”Tall
ROUND GRATES
DISPLAY
STANDHolds 10 Pokers
MSRP
Display ONLY $100Purchase 10
Poker FREEWeight of poker - 3 lbs. each
Stainless Steel Pokers (40” Long)• Welded 304-Stainless steel rod,
3/8" diameter• Vinyl foam handle (Closed Cell)
• Hook-back tip• Custom Lengths Available
STAINLESS
STEEL POKER
3/8” DIA. STAINLESS
STEEL 40” LENGTH
WITH CLOSED CELL
VINYL HANDLE
Hook Back Design
MSRP $50
with HOOK-BACK Tip
POKER
DIsplay Stand
3/8”Dia.
POKER
RETAIL PRICE LIST
Effective May 1, 2021
• 18 Gauge Galvanized Metal Plated Finish• High heat-resistant electrostatically
applied, weather-resistant black finish• Welded stainless steel handle• Edge Trim• Sizes to fit 28” diameter, 34 diameter, 42”
diameter and 46” diameter fire pit openings
• #304 Stainless Steel, 16 Gauge• 44” Diameter Size covers fire
pits up to 42” diameter• Edge Trim • High heat-resistant
electrostatically applied, weather-resistant black finish on topside
Stylish Octagonal Shape Resists High Winds!
This Snuffer Lid helps put out the fire in a shorter period of time and not only keeps outside debrisfrom getting into your fire pit...it keeps the unburnedwood dry for the next time you build a fire.
Round Covers fit up to 46” opening
Round and Square Pit Cover helps snuff outthe fire in a shorter period of time and keepsdebris and rain out of your fire pit.
FOLDING Fire Pit Cover
Octagonal / Round
SNUFFER LID
30” Dia. MSRP
36” Dia.MSRP
42” Dia. MSRP
48” Dia. MSRP
Galvanized Steel Platedwith Black Finish
$190(for 28” Opening)
$218(for 34” Opening)
$235(for 40” Opening)
$260(for 46” Opening)
FOLDING FIRE
PIT COVER
44” x 44” DiameterMSRP
44” SquareMSRP
STAINLESS STEEL $499 $499
OCTAGONAL or ROUND
ROUND or SQUARE Welded StainlessSteel Handles
OctagonalShape
Fire Pit Cover - Snuffer Lid
FIRE PIT COVERS and SNUFFERS
Master Flame™Outdoor Fire Pit Covers, Snuffers,Fire Rings and Accessories
Weight of the octagonal and round snuffer covers - 17 lbs. each
Weight of the square and round folding covers - 40 lbs. each
Dome Fire Pit Cover helps snuff out the fire in a shorter period of time andkeeps debris and rain out of your fire pit.
42” Diameter and 12” High
36” Diameter and 8” High
DOME FIRE PIT COVER 36” DiameterMSRP
42” DiameterMSRP
CARBON STEEL $425 $450
DOME COVER
Welded Top and Side Stainless Steel Handles
Weight of dome covers - 45 lbs. each
Folds in Half forEasy Storage
Welded StainlessSteel Handles
RoundShape
• Turned Carbon Steel, 14 Gauge• 42” Diameter Size covers fire
pits up to 40” diameter; 12” dome height• 36” Diameter Size covers fire
pits up to 34” diameter; 8” dome height• Edge Trim• High heat-resistant electrostatically applied,
weather-resistant black finish on topside
SQUARE OR RECTANGULAR FIRE PITS
Master Flame™Welded Steel Outdoor Fire Pits
Note: Images of customized Master Flame Steel Fire Pit taken on restaurant’spatio. Also seen on catalog cover.
Enjoy the warmth, mood and glow of an outdoor fire in your gathering area. This durable and lasting fire pit design comeswith steel fire grate and optional hinged fire pit safety screen forsimple fire management. Available in 5 sizes.
Customization: Steel fire pit can be customize by plasma cutting the steel plate base, side panels or paintingartwork on metal plate or ember screen. Plasmacut artwork is limited to silhouette cutting or stenciled logo.
Welded Steel Fire Pit • 9 gauge steel plate • smaller footprint• 20” Fire Pit Height (37” Height with safety screen)• Heat and weather-resistant black finish
Welded Steel Square Fire Pit Grate• 5/8” steel bar stock• 2” legs• Heat and weather-resistant black finish
OPTIONAL Hinged Fire Pit Safety Screen• Fitted square or rectangular model• Screen height is approximately 17”• 1/4 x 1” solid welded steel framework• Steel wire screen mesh (8 x 8 per/sq.inch; 23 gauge)• Choice of carbon steel, hybrid or all stainless steel
Square orRectangle
Fire Pit
BASE CHOICE
MSRPFire Pit
(Drop-in Drink Railnot included)
HINGED Safety Screen
Adder
24” 3LG,5 $XXX $600 Mild Steel$695 Hybrid$780 Stainless
30” Choice of $XXX $600 Mild Steel$695 Hybrid$780 Stainless
36” Choice of $XXX $660 Mild Steel$725 Hybrid$845 Stainless
24” x 24” $499STANDARDor CUSTOM
30” x 30” $569STANDARDor CUSTOM
36” x 36” $799STANDARDor CUSTOM
30” Choice of $XXX $660 Mild Steel$725 Hybrid$845 Stainless$550 Mild Steel$625 Hybrid$700 Stainless
36” x 30” $620STANDARDor CUSTOM
30” x 24” $559STANDARDor CUSTOM
Example Weight (36” x 36”square fire pit shown above):Approximately 266 lbs. (Fire PitScreen is approximately 56 lbs.;Grate 50 lbs.; and Fire Pit alone160 lbs.)
Master Flame™ Square or Rectangular Fire Pit
36” x 36” SquareSteel Fire Pit withGrate and Standard MetalPlate Base
9 10Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
RETAIL PRICE LIST
Effective May 1, 2021
Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com11
ROUND BOWL FIRE PITS
Master Flame™Welded Steel Outdoor Fire Pits
RoundBowlFire Pit
BASE CHOICE
MSRPFire Pit
(Includes bowl,grate and base)
DOME SafetyScreenAdder
PIVOT SafetyScreen Adder
$225 Mild Steel $255 Mild Steel$255 Hybrid $285 Hybrid
$375 Stainless $410 Stainless
$265 Mild Steel $305 Mild Steel
$300 Hybrid $345 Hybrid
$450 Stainless $495 Stainless$315 Mild Steel $360 Mild Steel
$365 Hybrid $435 Hybrid$475 Stainless $555 Stainless
24”dia.
$344TRIPOD, 4LG-SQ, 4LG-R,
XBASE, SWN,RING
30”dia.
$439TRIPOD, 4LG-SQ, 4LG-R,
XBASE, SWN,RING
36”dia.
$765TRIPOD, 4LG-SQ, 4LG-R,
XBASE, SWN,RING
TRIPOD Base
(TRIPOD)FOUR LEG BASE-ROUND
(4LG-R)
FOUR LEG BASE-SQUARE
(4LG-SQ)Standard X BASE
(XBASE)
BLACK SWAN BASE
(SWN)RING BASE
(RING)
OPTIONAL Dome or Pivot Model
Fire Pit Safety Screen• Screen height: Dome is
approximately 17”; Pivot Model is approximately half the diameter of bowl
• 1/4 x 1” solid welded steel framework
• Steel wire screen mesh (8 x 8 per/sq.inch; 23 gauge)
• Choice of carbon steel, hybrid or all stainless steel
Welded Steel Fire Pit • 9 gauge mild steel bowl• Expanded steel metal mesh welded to center drain• 30” bowl approximately 18” fire pit height; 36” bowl
approximately 20” height (17” screen height)• Heat and weather-resistant black finish
Welded Steel Fire Pit Grate• Welded 5/8” steel bar stock• Heat and weather-resistant black finish
Steel round bowl fire pits are available in 24”diameter, 30” diameter and 36” diameter with a choice from six base styles.Drained bowl design includes steel grate. Optional pivot ordome fire pit safety screen is available in mild steel, hybrid or all stainless steel models.
Master Flame™ Fire Bowl Fire Pit
36” Fire Pit Bowl and grate shown
with 4 Leg Square Base and with
Dome Fire Pit Safety Screen
RETAIL PRICE LIST
Effective May 1, 2021
ROYAL SERIES COAL EFFECT PAN BURNER
• 12" Front X 6-3/4" Rear X 6" Deep Tray• 14" Front X 8-3/4" Rear X 6" Deep Tray• Burner supplied with dispersion medium (non-burning)
• 30-piece coal set (glowing non-consummable for pan)
ROYAL SERIES
Coal Effect
Burner
MODEL WITH MMV-READY
MSRP
WITH MMV/HHR
MSRP
WITH EIR
MSRP#B 401 12 NG 12” Burner
- NG
$660 $800 $900
#B 401 12 LP 12” Coal
- LP
#B 401 14 NG 14” Burner
- NG
#B 401 14 LP 14” Burner
- LP
BURNER SUPPLIED WITH COAL (Non-Burning Synthetic)
SAME PRICING FOR ALL MODELS!
ACCESSORY DESCRIPTION MSRP#COAL B Bag of COAL (Non-Burning):
Enough to Fill 14” Burner Tray
$37.00
Model GV34MMV/HHRShown
INDOOR SPECIALTY BURNER
12
Fully VentedSpecialty Burner
36” Fire Pit Bowl
shown with 4 Leg
Round Base and
Pivot Fire Pit
Safety Screen
Hi to Lo Modulating
with ACCUMEN
REMOTE CONTROL
Hi to LoModulating
with Electronic
Ignition and REMOTE
CONTROL
FITS MOST Basket Designs
Hi Lo ModulatingMMV/HHR
MERTIK GV34 - Hi Lo
Specify Natural Gas (NG) or Propane Gas (LP) for each model ordered. Be sure to specify log style – Red Oak (RO), Charred Split Oak (CSO) Enchanted Evening (EE) or Aged Oak (AO) – along with the burner size.
Examples: #EL24-NG-AO, #EL21-LP-CSO, #EL36-NG-RO
Log Styles Apply to ALL GAS LOG Models as noted in descriptions.
ELITE Burner
with Log set
18” Burner
(#EL18)
MSRP
21” Burner
(#EL21)
MSRP
24” Burner
(#EL24)
MSRP
30” Burner
(#EL30)
MSRP
36” Burner
(#EL36
MSRPMATCH LIT $630 $660 $700 808 $1400
Log Style Choice RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO RO
Burner ONLY $511 $541 $581 $662 $1118INSTALLATION KIT includes Black Lava Rock, Glowing Embers, Vermiculite Medium, Bendable Gas Line with Fittings and 10 Scent Sticks.Damper Clamp not supplied with Match-Lit Burner.
Raised Rear Log Support
Raised Rear LogSupport
Grate FacadeSeparates forEasy Installation
Rear Burner withDiverters
Front Burnerwith Baffles Center Grate Tine
Holds“Scent Sticks”
Ember Burner through Lower Pan
• Cleanest, most realistic burn in the industry• Straight port injection• Sandless - Specifically designed diverters and baffles
disperse gas to provide a livelier, more natural-looking fire. No sand maintenance required.
• One piece burner construction• Separate logs - can be configured to the owner's
preference (number of logs depends on system size)• Choice of Log Style• High heat-resistant electrostatically applied, black finish• Optional log accessory kit available to hide electronics,
hook ups, etc.
Master Flame™Indoor Fully Vented Gas LogFireplace Systems
ELITE TRIPLE BURNER with LOGS
Red Oak Logs (RO)Charred Split Oak Logs (CSO)
Aged Oak Logs (AO)
GAS LOG BURNERS
GAS
SAFETY PILOTMatch Light VALVE (Manual)
Natural GasONLY
Hi to Lo MANUAL MODULATING
MILLIVOLT READY
Hi to LoModulating
with
Remote
ELECTRONICIGNITION
With REMOTE
Master Flame™ EliteTriple Burner with Logs
Ordering Gas Log Burner and Logs
Optional: Specify Gas Control Valve
Upgrade of installed gas valves.
MANUAL VALVE
MATCH LIGHT(NG ONLY)
MANUAL VALVE
SAFETYPILOT
(NG or LP)
MANUAL MODULATING VALVE
KIT* (NG or LP)
MILLIVOLTREADY
VALVE KIT* (NG or LP)
Hi to Low MODULATING
with REMOTE
CONTROL
Hi to Low MODULATING
REMOTE CONTROL and ELECTRONIC
IGNITION*(NG or LP)
Add
$178
Add
$435
Add
$502
Add
$671
Add
$925
UPGRADE KIT ONLY - Dealer Conversions
$103 $145 $303 $364 $495 $645
UPGRADE: Factory Installed Gas Valve
The Elite Series is the preferred choice of thosewho want the fullest, most natural looking flame,and the only choice for those who want the luxuryand esthetic appeal of a real wood fire. Optionalconveniences like hi-lo flame modulation, remotecontrols and even electronic ignition give theowner the ultimate in comfort and mood control.
Weight of Burner: 35 lbs 40 lbs 45 lbs 50 lbs 55 lbsWeight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs 100 lbs
The Master Flame Elite TRIPLEBURNER design feature MASTERFLAME’s SANDLESS STRAIGHTPORT INJECTION SYSTEM andrear-elevated back log supportsfor a brighter, fuller flame and themost natural wood-burning look.
13 14Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
RETAIL PRICE LIST
Effective May 1, 2021
ALL Master FlameELITE BURNERSand Gas Valves Factory Assembledand Bench Tested prior to shipment.
ALL Master FlameELITE BURNERSand Gas Valves Factory Assembledand Bench Tested prior to shipment.
Master Flame™Indoor Fully Vented Gas Log Fireplace Systems
15
ELITE Gemini
Burner
with Log set
18” Burner
(#ELG18)
MSRP
21” Burner
(#ELG21)MSRP
24” Burner
(#ELG24)
MSRP
30” Burner
(#ELG30)
MSRPMATCH LIT 900 $930 $960 $1082
Log Style Choice RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO
Specify NG or LP, Log Style and burner size. Examples: #ELG18-NG-RO, #ELG24-LP-CSOOptional Gas Control Valve UPGRADE (see page 14for pricing and pictures of installed gas valves).
The “SEE THRU” GEMINI Series features Master Flame’ssandless, straight port injectionproviding the liveliest and most natural-looking flame and burn - noticeably superior tograte/burner/sand/pan log sets.
• Five Burners - Two Outside Burners, Center Burner and Twin Ember Burners (One on Each Side)
• High heat-resistant electrostatically applied, black finish
• Choice of Log Style (see page 4).
• Optional Gas Control Valve Upgrade (see page 2)
Center Burnerwith Diverters
Side Burnerswith Baffles
Center Grate TineHolds “Scent Sticks”(Both Sides)
Ember Burner through Lower Pan (Both Sides)
ELITE GEMINI “SEE-THRU”5 BURNER With LOGS
Match Lit Model – Natural Gas OnlySpecify log style (see page 4) and burner size.
Example: #SB24-RO or #SB20-CSO
• Welded steel pan and burner tube • Durable welded steel grate for gas logs• Natural Gas only - Match Lit ONLY• Electrostaticly finished with high heat-resistant
black paint • Choice of Logset Style: Red Oak, Charred Split
Oak or Aged Oak
Single
Burner
with Log set
20” Burner
(#SB20)
MSRP
24” Burner
(#SB24)
MSRP
30” Burner
(#SB30)
MSRPMATCH LIT $519 558 $667
Log Style Choice RO/CSO/AO RO/CSO/AO RO/CSO/AO
Burner ONLY $312 $333 $390
PREMIUM SINGLEBURNER with LOGS
Grate(5/8” Bar Stock)
Burner TubePan for Holding Mediums- Sand for Flame Pattern- Embers
Get the flame and esthetic appeal of a real wood fire with the hand built Master Flame SAND BURNER Series Gas Log System. Separate steel grate allows optimum gas log placement for most efficient and natural looking flame. Available in 20”,24” or 30” burner sizes.
RH Set-upShown
Weight of Burner: 37 lbs 42 lbs 47 lbs 52 lbsWeight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs
16Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
For Master Flame Indoor and OutdoorGas Log Burners
CHARRED
SPLIT
OAK
SIZELog Set
Logsin Set MSRP
#CSO18 18” 6* $201#CSO21 21” 6* $219#CSO24 24” 8* $291#CSO30 30” 8* $338
LOG KITS
ACCESSORY KIT
* Front log is 2-piece
RED
OAK
SIZELog Set
Logsin Set MSRP
#RO18 18” 5 $201#RO21 21” 6 $219#RO24 24” 7 $237#RO30 30” 8 $291
AGED
OAK
SIZELog Set
Logsin Set MSRP
#AO21 21” 6 $243#AO24 24” 6 $385#AO30 30” 8 $403
LOG
ACCESSORY KIT
Logsin Kit MSRP
#LAK 4 $50
Red Oak Log Sets
Charred Split OakLog Sets
Aged Oak Log Sets
OUTDOOR
DUAL
Burners
with Log set
LogStyle
MATCH LIT (NG ONLY)
MSRP
#ODSS-18” CSO/RO $703#ODSS-21” CSO/RO $757
#ODSS-24” CSO/RO $812#ODSS-30” CSO/RO $920
OUTDOOR
Triple Burner
with Log set
LogStyle
MATCH LIT (NG ONLY)
MSRP#ODSSST-18” CSO/RO $850#ODSSST-21” CSO/RO $900
#ODSSST-24” ALL STYLES $963#ODSSST-30” ALL STYLES $1133
100% StainlessSteel DualBurner Outdoor
100%StainlessSteel TripleBurner Outdoor
OUTDOOR2 BURNER
OUTDOOR SEE-THRU 3 BURNER
GAS LOG BURNERS OUTDOOR GAS LOGS and LOG SETS
RETAIL PRICE LIST
Effective May 1, 2021
FIRE PIT GRATE
RECTANGULARTOTAL PERIMETER
Up to 96”MSRP
TOTAL PERIMETER97” to 144”
MSRP
TOTAL PERIMETER145-180”
MSRP
TOTAL PERIMETER181” +
per inch ADDERAdd to 180” MSRP
5/8” CARBON STEEL $189 $233 $367 $155/8” STAINLESS STEEL $558 $756 $862 $30
CHAR-GUARD
Ember Catch Option
24” Grate Adder to MSRP
27” Grate Adder to MSRP
30” Grate Adder to MSRP
Over 38” Adder to MSRP
$36 $42 $65 $100
RECTANGULAR FIREPLACE GRATES Rectangular Fireplace Grate
with Char-Guard Ember Catch
Standard Fireplace Grate with Char-Guard Ember Catch
RectangularFireplaceGrate
StandardFireplaceGrate
Standard Welded Steel Grates
• Choice of 5/8" or 1/2” carbon steel bar stock or stainless
steel bar stock
• Standard Fireplace Sizes 20”, 24”, 28” and 32” Width
(Widest Part)
• 17” deep
• Char-Guard Ember Catch Option
• 4” legs for optimal air circulation (longer or shorter legs available
for $10 UPCHARGE)
5/8”Bar 1/2”
Bar
Standard FIREPLACE GRATES
FIREPLACE GRATE
STANDARD SHAPE
20” (6 Bar/Tines)
MSRP
24”(7 Bars/Tines)
28”(8 Bar/Tines)
32” (9 Bar/Tines)
5/8” CS $162 $172 $176 $1835/8” SS $309 $379 $403 $4511/2” CS $112 $124 $131 $1431/2” SS $187 $200 $210 $233
CHAR-GUARD
Ember Catch Option
20” Grate Adder to MSRP
24” Grate Adder to MSRP
28” Grate Adder to MSRP
32” Grate Adder to MSRP
$10 $20 $30 $40
Char-Guard Models Char-Guard Option improves complete burn consistency, simplifies ashclean-up and allows you the choice of using charcoal. Char-Guard is heavyduty expanded metal fitted and welded to the underside of the grate.
17 18Voice: 630-238-0611 800-642-7254
Fax: 630-238-9871 sales@masterflame1.com
Master Flame™Wood Burning Fireplace Accessories
RETAIL PRICE LIST
Effective May 1, 2021
FIREPLACE SCREENS
Fireplace SAFETY SCREENS
HEIGHT
WIDTH
BOW/CURVEDEPTH
n
OUTSIDE FEETon End
How to Order: Supply us with height and width of flatscreens and footing requirement (Outside and Inside). Forcurved screens, we require the height, width and bow (curve).Examples: 28” H x 40” W screen is 1,120 square inches or7.7 square feet with the MSRP of $188. A fireplace screen36” H x 48” W is 1,728 square inches or 12 square feet withthe MSRP of $248.00.
SINGLE PANEL
FIREPLACE
SAFETY
SCREEN
STANDARD
SIZEUp to 9 Square
Feet MSRP
Over 9
Square Feetper square foot
ADDERAdd to
STANDARDMSRP
FLAT withFrame Footing
$197 $20.00
CURVED (Bow) $197 $20.00
Single Panel Fireplace Screen with
Steel Footing or Bow (Curve)
• Aspen Industries Fireplace Screens are welded high
grade steel mesh and bar stock and have a high
heat-resistant electrostatically applied, black finish
• Handle(s) welded to top frame
• Maximum Size 48” x 48”
HEIGHT
WIDTH
INSIDE FEET
7” in from End
FIREPLACE GRATES
PRODECT INDEX
Original Owner Warranty:Aspen Industries, Inc. warranties its Fire Pits, Fire Pit Safety Screens andFire Grates, to the original owner, against breakage (except breakage dueto mishandling and abuse) for 12 months from the date of consumer pur-chase. No warranty on paint – normal weathering and some discolorationmay occur depending upon materials burned. Scratched or exposed metalwill oxidize and discolor. Shipping not included.
Original Owner Warranty:Aspen Industries, Inc. warranties its Gas Burner Assemblies, to the
original registered owner, against breakage (except breakage due to mishandling and abuse) for life. Aspen Industries, Inc. warranties itsfactory installed pilot valves, controls, accessories and logset to itsowner, against any performance defects for a period of 1 year fromthe date of consumer purchase. Shipping not included. WARRANTY REGISTRATION IS REQUIRED.
Fire Pit, Screen & Grate WARRANTY
Gas Log and Burner WARRANTY
Master Flame Fire Pits and Accessories
• Lift Off Dome Fire Pit Screens 1• Round Hinged Fire Pit Screens 2• Square and Rectangular Hinged Fire Pit Screens 3• Square LOW PROFILE Hinged Fire Pit Screens 4• Pivot Model Fire Pit Screens 5• Fire Pit Grates 7• Fire Pit Poker 8• Fire Pit Covers and Snuffers 9• Square-Rectangular Welded Steel Fire Pits 10• Round Fire Bowl Welded Steel Fire Pits 11
Gas Coal-Effect Burner System
• Royal Coal Effect Burner System 12
Master Flame Gas Log Burner Systems and Logs
• Elite Triple Burner with Logs 13• Elite Gemini “See-Thru” 5 Burner with Logs 15• Single Burner with Logs 15• Outdoor Stainless Steel Two Burner with Logs 16• Outdoor Stainless Steel Three Burner with Logs 16• Log Kits 16
Fireplace Grates and Screens
• Standard Fireplace Grate 17• Rectangular Fireplace Grates 17• Fireplace Screens 18
CUSTOM Welded Products
• Custom Design Burners 19• Custom Design Screens 19
Aspen Industries, Inc.Master Flame ProductsBensenville, IL 60106Voice: 630-238-0611Toll Free: 800-642-7254Fax: 630-238-9871sales@masterflame1.com
CUSTOM Fire Pit Screens
CUSTOM Fireplace Screens
CUSTOM BurnersWELDED STEEL PRODUCTS MADE TO SPECIFICATION:
Custom is referred to as any product notlisted in the Aspen Industries, Inc. currentprice list.
To quote a Custom Unit Order we will need a drawing with specifications.
Aspen Industries Custom Order Department
has manufactured many types of welded
steel hearth, fireplace and fire pit product,
including burners, fire grates, burner and
grate systems, burner and pan system, “fire
and ice” type burner / shallow pan, fireplace
screens as well as unique fire pit screens
with special handle and access locations.
Authorized Dealers are listed onour website:
www.masterflamegaslogs.com
TERMS & CONDITIONS PAYMENT TERMS:
1% 10, NET 30 DAYS. Late charges 2% per monthon payments beyond terms.
FREIGHT: F.O.B. Bensenville, IL
PRICE POLICY: All prices are subject to changewithout notice. Orders are subject to credit approvalat time of placement.
CREDIT CARDS:Aspen Industries, Inc. accepts Visa and Mastercard for Invoice payments (2% added to invoice).
RETURNS:A Returned Goods Authorization (RGA) is requiredprior to return of material. There is a 20% restocking fee for all returned goods.
Master Flame™Customized Welded SteelProductsCUSTOM PRODUCTS
top related