marine antennas catalogue - freeinfoyachting.free.fr/pdf/catalogue/glomex/catalog.glomex.pdf ·...
Post on 25-Jan-2021
5 Views
Preview:
TRANSCRIPT
-
1
IND
EXSAT TV ANTENNAS 2
OMNIDIRECTIONAL TV ANTENNAS 4
VHF ANTENNAS 8Sailboat VHF Antennas ALOUD 8Powerboat VHF Antennas ALOUD 10Powerboat VHF Antennas CLASSIC 12Masthead and Emergency 15Professional VHF Antennas PRO 16
SSB ANTENNAS 17
CELL - PHONE ANTENNAS 18
AM - FM ANTENNAS 19
ORBCOMM ANTENNAS 20
C.B. ANTENNAS 21
NAVTEX 22
DIFFERENTIAL GPS AND LORAN ANTENNAS 23
EXTENSIONS 24GPS EXTENSIONS 25
ELECTRIC MOUNT 26
MOUNTS AND ACCESSORIES 27
CHART PLOTTER MOUNTS AND ACCESSORIES 32
GROUND & BONDING PLATES 33
CONNECTORS 34
COAXIAL CABLES 35
DISPLAYER 36
CROSS REFERENCE 37
GENERAL TECHNICAL INFORMATION 38
WARRANTY 41
MARINE ANTENNAS CATALOGUE
Inflatable Sail Boat Power Boat Commercial shipBig Yacht
-
2
V9532 SAT TV ANTENNA
V9532/500V9532/600
SAT TV
AN
TENN
AS SPECIFICATION• Voltage Antenna: 12 V.d.c.;
• Voltage Decoder: 220 V a.c.;• Tracking: automatic or manual;• Electric motors for horizontal and vertical axis;• Operating range: -30° +70°C;• Humidity: 95%;• Rotation angle of antenna: 360°;• Horizontal beam: 8° degrees;• UV resistant radome;• Dimension Mod 9532/500:
Diameter 500 mm Height.552 mm• Dimension Mod 9532/600:
Diameter 600 mm Height.685 mm• Weight Mod 9532/500: 6Kgs• Weight Mod 9532/600: 8Kgs• Gain Mod 9532/500: 24 db• Gain Mod 9532/600: 30 db• Wind max: 90 knots• Frequency: LNB10,7/12,75 Ghz• Futures upgrades: ready• Cable 10 mts. (50’)• Roll bar mount• Roll bar reinforcement
THE ADVANTAGE OF THE GLOMEXSAT TV ANTENNA
• Excellent television reception whilst moored,at anchor or on steady passage;
• Can be installed on all powerboats from 30’;• Decoder supplied and programmed;• Remote control and on screen display for easy
tuning of the antenna;• Light and small radome;• Simple installation;• Exceptional value – crystal clear television
viewing for everyone.
10 mts (50’) coax cable (supplied)Supplied free with antenna
Boaters watch television …
95% 3% 2%AT DOCK IN NAVIGATION AT ANCHOR
-
3
SAT TV
AN
TENN
AS
V9532 MARINE TV SAT
The perfect solution for boat owners that want alight, performing and not expensive TV SatelliteAntenna. It allows to watch satellite televisionwhen moored at the anchor or when navigatingwith automatic pilot, and covers almost all needswhen watching television on power boats.
No maintenance is for seen for this antenna, allthe parts are sealed and conceived for use onboats only, like all Glomex products. Afterselecting the program you want to watch on theremote control, the Glomex Sat TV Antenna willsearch for signal will come back in a few seconds.
The best position for the antennais to center it as low as possibleat the center of the boat.
INSTALLATION BASIC RULES
-
4
V9112 antenna
Wall plastic mount(supplied)
V91472 way splitter (option)
ANTENNA
➔
TV
➔
TV
➔
* The V9112 TV antennas are supplied with theamplifier, including flush and wall plastic covers,15 mts (50’) of low loss, twin screen 75 Ohmcoax cable (V9135), the 1,5 mt. (5’) TV cordand all the F gold plated connectors for theinstallation on board.
V9116110 V ac adaptor american plug(option)
V9117220 V ac adaptor european plug(option)
15 mts (50’) coax cable(supplied)
V9112 MARINE MASTERThis, the most popular Glomex TV Antenna, hasbeen chosen as standard equipment by all majorboat builders worldwide. New for the 2000, arevolutionary state of the art antenna element andamplifiers produces exceptional performanceon all channels, including the lower VHFfrequencies. Also, it allows to receiveradio programs using the dueaccessories.In order to ensure lifelong service andprotection fromthe harsh marineenvironment thereare no active componentsin the antenna and the radome is made of UVresistant, injection moulded white nylon. The new power supply/amplifiers are designedspecifically for boats and can accept an input fromdockside cable, a satellite receiver or VCR(V9112/00). It features an exclusive bypass(V9112/00) that allows the TV set to use theantenna only for receiving in strong signal areasthus avoiding the attenuation of the signalintroduced on the TV set when the amplifier is notfitted (min gain). Also the A/B switch (Version9112/AB) allows the other television systemsexisting on board like the cable, the dock and thesatellite antenna to integrate into one system onlyavoiding two different plants in order to savemoney.
LIFETIME WARRANTY
TV A
NTEN
NA
SO
MN
IDIREC
TION
AL
SPECIFICATIONS FOR OMNIDIRECTIONAL MARINE TV ANTENNASMODEL ANGLE OF FREQUENCY NOISE IMPEDANCE GAIN POWER POWER
RECEPTION RANGE FACTOR AVERAGE CONSUMPTION SUPPLY
V9112 360° 40/890 MHz 2,1 dB 75 ohms 27.5 dB 45 m. a. 12/24 V dc
V9146F 90° connector (option)
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty).
-
5
V9113 Seagullprotection
3 different choice
V91492 way radiocable
TVMINGAIN
MAXGAIN
TV OFF ON
BY PASS
AMPLIFIER MIN - MAX GAIN
MINGAIN
MAXGAIN
TV
TVMIN MAX
DOCKSATELLITEANTENNA
TVMIN MAX
DOCKSATELLITEANTENNA
V9148AM/FMradio cable
V9112/00 with 50023/98 AMPLIFIER
V9112EC with 50023/98 EC AMPLIFIER
V9112A/B with 50023/98 SR12A/B SWITCH AMPLIFIER
ANTENNA
➔
RADIO
➔
TV➔
TV A
NTEN
NA
SO
MN
IDIREC
TION
AL
SPECIFICATIONS FOR OMNIDIRECTIONAL MARINE TV ANTENNASBASE ANTENNA CONSTRUCTION WEIGHT DISC ANTEN/AMPL ADJUSTABLE TV SET TERMINATION A/B
DIAMETER HEIGHT MATERIAL DIAMETER BY PASS GAIN MAX CONNECTORS SWITCH
25 mm 185 mm UV resistant 900 grs 370 mm YES YES 2 F YES(1”) (7”1/2) nylon 2 Lb (14”) (V9112 A/B)
In Glomex’s range there are no economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
-
6
V9150 antenna
TV A
NTEN
NA
SO
MN
IDIREC
TION
AL
V9150/00 COMMUNITY TV ANTENNADesigned to meet the needs of large yachts and shipswhich require multiple outlets, this antenna cansupply up to 6 TV sets. The 2000 modelhas a new antenna element whichdramatically improves itsreceiving capabilities.All of the plasticparts in the antennaare injection moulded,UV resistant nylon. The new amplifier(50023/98SR12) features the adjustable gaincontrol and the A/B Switch in order to integrate inone plant only all the existing television systems onboard like the cable, the dock, the satellite antenna,the line amplifier 50022/00 provide to compensatethe loss of the coax cable that become important inlarge yachts and ship where the TV set is far from theamplifier
LIFETIME WARRANTY
Wall plastic mount(supplied)
* The V9150 antennas are supplied with 2amplifier splitters, 65 mts. of low loss cablefor the plant and all the F gold platedconnectors.
50022/006 OUTLET LINE
AMPLIFIER
50023/98 SR12AMPLIFIER
SPECIFICATIONS FOR OMNIDIRECTIONAL MARINE TV ANTENNASMODEL ANGLE OF FREQUENCY NOISE IMPEDANCE GAIN POWER POWER
RECEPTION RANGE FACTOR AVERAGE CONSUMPTION SUPPLY
V9125 360° 40/890 MHz 2,2 dB 75 ohms 26 dB 20 m. a. 12/24 V dc
V9150 360° 40/890 MHz 2,1 dB 75 ohms 36 dB 120 m. a. 12/24 V dc
V9146F 90° connector (option)
65 mts coax cable (supplied)
15 mts
25 mts 25 mts
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty).
-
7
V9125 antenna
V9125/00This compact, lightweight TV antenna featuresexeptional performance on all TV frequencies.Made of UV resistant, injection moulded nylon itwill keep its white,mirror like finish for years. Likeour other TV antennas, the V9125 has no activecomponents in the antenna, which provides extraprotection from atmospheric elements. The12/24VDC power supply amplifier is totallyscreened. This allows the best reception of TVsignals with less interference from shipboardelectrical noise sources. Also, it allows to receiveradio programs using the due accessories.
LIFETIME WARRANTY
* The V9125 TV antennasare supplied with theamplifier, including flushand wall plastic covers, 15mts. (50’) of low loss, twinscreen 75 Ohm coaxcable (V9135), the 1,5 mt.(5’) TV cord and all the Fgold plated connectors forthe installation on board.
V9116110 V ac adaptor american plug(option)
V9117220 V ac adaptor european plug(option)
V9124Stainless steel universal mount.Diam 25 mm (1”); h 150 mm(6”) for V9125 - V9112 - V9150
V9123Stainless steel mastheadmount.Diam 25 mm (1”); for V9125
V9173TVStainless steel masthead mount.Diam 25 mm (1”); forV9112 - V9150. No Thread.
ELECTROPOLISHED STAINLESS STEEL MOUNT FOR TV ANTENNAS
SPECIFICATIONS FOR OMNIDIRECTIONAL MARINE TV ANTENNASBASE ANTENNA CONSTRUCTION WEIGHT DISC ANTEN/AMPL ADJUSTABLE TV SET TERMINATION A/B
DIAMETER HEIGHT MATERIAL DIAMETER BY PASS GAIN MAX CONNECTORS SWITCH
25 mm 120 mm UV resistant 350 grs 250 mm NO YES 2 F NO(1”) (5”) nylon 12 Oz (10”)
25 mm 185 mm UV resistant 900 grs 370 mm NO YES 6 F YES(1”) (7”1/2 nylon 2 Lb (14”)
TV A
NTEN
NA
SO
MN
IDIREC
TION
AL
Wall plastic mount(supplied)
15 mts (50’) coax cable(supplied)
1,5 mts (5’) TV set cord(supplied)
V9146F 90° connector (option)
V9148AM/FMradio cable
In Glomex’s range there are no economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
-
8
VH
F AN
TENN
AS
SAILB
OAT
ALOUD SERIESThere is no compromise in the manufacturing of theseantennas. The tapered stainless steel whips canabsorb physical shocks without bending.The fibreglass version has a glossy polyurethanecoating to provide extra corrosion protection for theinternal copper elements. The Glomex exclusiveweatherproof solderless connector (*) allowsinstallation without soldering so it simplifiesthe replacement of existing antennas. Theseindividually tuned antennas are supplied withall of the parts necessary for installation. We supplyonly high quality RG58 C/U (MIL C17) coax cablewith our ALOUD product line. These antennas are alsoapproved for marine use on grounded andungrounded installations (sail and power boats) by theNetherlands Postal Service.
RA106SLSSB18
Masthead stainless steel w
hip 18 mts. (60’) coax cable
SOLD
ERLESS18 m
ts. (60’) coax cable
RA106G
RPSB18M
asthead glossy fibreglass whip 18 m
ts. (60’) coax cableSO
LDERLESS
18 mts. (60’) coax cable
RA106SLSSB25
Masthead stainless steel w
hip 25 mts. (83’) coax cable
SOLD
ERLESS25 m
ts. (83’) coax cable
RA106G
RPSB25M
asthead glossy fibreglass whip 25 m
ts. (83’) coax cableSO
LDERLESS
25 mts. (83’) coax cable
RA138PVC protectionfor PL259
RA140Feed thru forcoax cable.Not for RA 109
RA132PL259 connectorTwist-on
Supplied with allALOUD antennas
3db 3db 3db 3dbRA106Solderlessconnector
-
9
VH
F AN
TENN
AS
SAILB
OAT
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty).In Glomex’s range there are no economic or special series. All the products with lifetime warranty logo are designed and assembled to standards
which respect Glomex’s lifetime warranty.
RA109SLS
Masthead stainless steel w
hip SO239 term
ination for PL259
RA109G
RPM
asthead glossy fibreglass whip SO
239 termination for PL259
3db 3db
-
10
VH
F AN
TENN
AS
POW
ERBO
AT
RA106SLSPB
Powerboat 1”x 14 tpi stainless steel w
hip (no coax supplied)
RA135supplied
1”x14 adaptor
1”x14 adaptor
1”x14 adaptor
1”x14 adaptor
RA135supplied
RA106G
RPPBPow
erboat 1”x 14 tpi, glossy fibreglass whip (no coax supplied)
RA106SLSPB6-135
Powerboat 1”x 14 tpi, stainless steel w
hip 4,5 mts. (15’) coax cable + 4 w
ay nylon ratchet mount
4,5 mts. (15’) coax cable
RA106G
RPPB6-135Pow
erboat 1”x 14 tpi glossy fibreglass whip 4,5 m
ts. (15’) coax cable + 4 way nylon ratchet m
ount4,5 m
ts. (15’) coax cable
SPECIFICATIONS FOR MARINE VHF ANTENNAS - (SERIES ALOUD RA 106)
FREQUENCY IMPEDANCE POLARISATION SWR LENGHT OF MAX. INPUT DCRANGE RA 106 - RA 109 (WATTS) GROUND GAIN WEIGHT
156/162 MHz 50 ohms Vertical
-
11
VH
F AN
TENN
AS
SAILB
OAT W
IND
IND
ICATO
R
RA179 MASTHEADWind indicator(380 mm) forAloud antennasRA106 / RA109series
-
12
VH
F AN
TENN
AS
POW
ERBO
AT
SPECIFICATIONS FOR MARINE VHF ANTENNAS - (SERIES CLASSIC)MODEL GAIN FREQUENCY IMPEDANCE POLARISATION SWR MAX. INPUT DC
RANGE (OMHS) (WATTS) GROUNDS
RA112 3 dB 156-162 MHz 50 Vertical
-
13
RA1225This high performance 8’ collinear antenna with itssuperb polyurethane finish will enhance theappearance of any boat. The collinear phased 5/8wave elements provide long range communicationswhile the other feature provide life long service.
* HAND ASSEMBLED AND HAND FINISHED
* EXTRA HIGH GLOSS POLYURETHANE FINISHUV RESISTANT
* BRASS AND COPPER ELEMENTS
* SOLDERLESS CONNECTOR
* 6 MTS RG58 LOW LOSS CABLE
* GOLD PLATED PL259 CONNECTORSUPPLIED. SOLDERLESS
* 2,40 MTS (8’) LENGTH
* ELECTROPOLISHED STAINLESS STEEL FERRULE
* NO JUNCTIONS ON THE BOTTOM OFANTENNA ELEMENT
* THE BEST PRICE ON THE MARKET
* FREE SOLDERLESS CONNECTOR
and
LIFETIME WARRANTYIt can be matched with the RA1278 CB, RA1288AM/FM and RA161 cellular antennas.
VH
F AN
TENN
AS
POW
ERBO
AT
RA132SOLDERLESSPL259 male gold platedconnector for RG58/U. Solderless
RA166/00StainlesssteelSuggestedmount(option)
RA107SSRatchet mountpolishedstainlesssteel(option)
RA116SSRatchet mountpolishedstainlesssteel(option)
6db
-
14
RA113You can be sure this antenna will lastfor years in the marine environmentwithout losing its great appearancedue to the extra glossy polyurethanefinish and its electropolished stainlesssteel ferrule.The collinear phased 5/8 waveelements made in solid brass willprovide long range communicationand life long service.
* 2,70 mts(9’) length.* Super glossy GLOMEX
fiberglass. * Solid brass antenna
elements.* Electropolished
stainless steel ferrule. * RG58 Low Loss Cable 6 mts (20’).* Same antenna element as RA1225
(see pag.13)
(NOT SOLD IN USA)
RA500Phased 2-wave elements in acollinear array with suppressor ofcable radiation at the element’s base.This 9 db, two-piece antenna is thebest choice when reliable long rangecommunications are desired.The heavy duty construction andpolyurethane finish ensure long lifein the marine environment.The use of an RA119 upper supportis required for a proper installation.For a matching SSB antenna use theRA700.
* 6,40 mts (21’4”) length,two-piece.
* GLOMEX glossy fiber-glass.
* Brass and copper antenna elements.
* Chrome - plated brass ferrules.
* RG58C/U (MIL-C-17)COAX 6 mts (20’).
VH
F AN
TENN
AS
POW
ERBO
AT
DC GROUND Pag. 39
RA132SOLDERLESSPL259 male gold platedconnector for RG58/U.Solderless
Supplied
RA132SOLDERLESSPL259 male gold platedconnector for RG58/U.Solderless
Supplied
6db 9db
6,40 mts (21’4”) length
-
15
RA114Emergency VHF Antennawith 9 mts (30’) coax cable0,35 mt (13”)
RA111Regatta VHF Antenna with18 mts (60’) RG 58 CU MILC17 coax cable, length0,30 mt (1’).
RA2022VHF Economy Antennafor masthead with 18 mts(60’) coax cable.1,5 mts (5’) length
RA132PL259 connector Twist-on
Supplied
SPECIFICATIONS FOR MARINE VHF ANTENNASMODEL FREQUENCY IMPEDANCE POLARISATION SWR MAX. INPUT DC
RANGE (WATTS) GROUND GAIN WEIGHT
RA114 156/162 MHz 50 ohms Vertical
-
16
V9174Universal mount
V9176L Mastheadbracket
V9171Pipe mount
V9173Masthead bracket
RA108This is the 5/8 wave marine VHF antenna mostpreferred by professional and commercialfishermen and land based stations. The injectionmoulded base and glossy polyurethane whip andradials produce a completely sealed antenna. Theground plane, comprised of four radials allows youto comunicate clearly despite heavy rolling andpitching of your boat.
RA110The RA110’s wide vertical radiation pattern andshort length produce uninterrupted communicationseven when your boat is heeled over or during severerolling and pitching.Its glossy polyurethan coating of the tube provideextra corrosion protection for the internal elements.
VH
F AN
TENN
AS
PROFES
SIO
NAL
RA158 N male connectorfor RG213/Usupplied with RA110
MOUNTS
SPECIFICATIONS FOR MARINE VHF ANTENNAS - (SERIES PRO)
MODEL GAIN FREQUENCY IMPEDANCE POLARISATION SWR MAX. INPUT DC TERMINATION LENGTHRANGE (OHMS) (WATTS) GROUND
RA110 3 dB 156-162 Mhz 50 Vertical
-
17
SS
B A
NTEN
NA
S
RA126Thru-deck R.F. Swivelmount and insulator
RA119Stand-off bracket
RA700The first and only completelyinsulated SSB marine antenna.Special coatings and a concealed RFconnection ensure the safety of thecrew. Proper installation requires theuse of the RA126 swivel mount, withits THRU-DECK RF connection, andan RA119 upper support. Its glossypolyurethane coating of the tubeprovides extra corrosion protectionfor the internal elements.
RA600Our economic SSB antenna with astandard side feed RF connection.It is supplied with amounting adapterto allow replacement of existingantennas, its glossy coating ensurelong lifetime.
SPECIFICATIONS FOR MARINE SSB ANTENNASMODEL GAIN FREQUENCY IMPEDANCE LENGHT MAX INPUT WEIGHT TERMINATION
RANGE (OHMS)
RA600 N.A. 2-30 Mhz N.A. 7 mts (23’) 400 W 2160 gr (4,7 lb) Side feedwith tuners termination bolt
RA700 N.A. 2-30 Mhz N.A. 7 mts (23’) 800 W 2514 gr (5,5 lb) Central feedwith tuners (see RA126)
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
7 mts (23’) length7 m
ts (23’) length
-
18
V9174
V9176
V9173
V9171
MOUNTS
RA161* 2,40 mts (8’) length* Glossy Glomex fibreglass * Solid antenna elements* Electropolished stainless
steel ferrule.
Matches the appearance of allGlomex 2,40 mts. (8’)antennas
RA160* 0,60 mts (2’) length * Glossy Glomex fibreglass.* Solid antenna elements * Chromed brass ferrules.
These antennas cover all theeuropean and americanfrequencies used for cellularphones on 800 and 900 and1800 and 1900 bands.
RA156
TNC connectorsupplied withthe antennaRA161
RA158
N Connector forRG213/U coaxcable suppliedwith the antennaRA160.
With the rapid worldwide expansion of the cellular network, many boaters are taking their phones with them tosea. In order to maximize performances an external high gain antenna is a must. Our RA160 and RA161antennas provide the best shipboard performance available. These antennas are built like all of our otherantennas, with no compromises, both models have solid brass elements and operate on all cellular frequenciesfrom 800 to 980 MHz. They also have glossy polyurethane finishes. Ferrules with 1”X14 threads allow the use ofall Glomex mounts. The sealed construction of these antennas guarantees high performance for years to come. TheRA161 matches the appearance of all other Glomex 2,40 mts (8’) antennas for aesthetically balancedinstallations.
SPECIFICATIONS FOR MARINE CELLULAR-PHONES ANTENNASMODEL GAIN FREQUENCY IMPEDANCE MAX. INPUT DC GROUND TERMINATION
RANGE (OHMS) (WATTS)
RA160 6 dB. 800 - 980 MHz 50 100 YES (*) 1”x14 tpi ferruleN connector
RA161 6 dB 800 - 980 MHz 50 50 YES(*) 1”x14 tpi - 6 mts (20’)lowloss coax RG58 with TNC
AN
TENN
AS
CELL - PH
ON
E
-
RA12810,3 mts(1’) length.Unbreakable UVresistant syntheticrubber injectionmoulded. Solidantenna element.Built-in mount andground plane builtin on the coax.
19
RA1288* 2,40 mts (8’) length.* Glossy GLOMEX
fibreglass.* Cromed brass ferrule.
Matches theappearance of allother Glomex 2,40mts (8’) antennas.
RA128* 1,50 mts (5’) length.* Glossy GLOMEX
fibreglass.* Solid antenna
elements.* Nylon ferrule.Matches the appearance of all other Glomex 1,50 mts (5’) antennas.
MODEL FREQUENCY IMPEDANCE TERMINATIONRANGE (OHMS)
RA1288 AM 550 - 1600 / FM 88 - 108 Mhz 93 6 mts (20’) Coax with Motorola plug
RA128 AM 550 - 1600 / FM 88 - 108 Mhz 93 6 mts (20’) Coax with Motorola plug
RA1281 AM 550 - 1600 / FM 88 - 108 Mhz 93 3 mts (20’) Coax with Motorola plug
RA128/18 AM 550 - 1600 / FM 88 - 108 Mhz 93 18 mts (60’) Coax with Motorola plug
RA201 AM 550 - 1600 / FM 88 - 108 Mhz 93 0,3 mts (1’) Coax with Motorola plug
RA201VHF/AM-FMradio splitter 12V d.c.allow to use the VHFantenna to receiveAM/FM radio
RA128/18* 1,50 mts (5’) length.* Glossy GLOMEX
fibreglass * Masthead bracket
with 18 mts (60’)coax cable.
SPECIFICATIONS FOR MARINE AM-FM ANTENNAS
V91492 way radiocable
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
0,3 mt
AM
-FM A
NTEN
NA
S
-
20
OR
BCO
MM
MARIN
E ANTEN
NAS
The Orbcomm communication system use the (LowEarth Orbit) satellites for mobile communication (e-mail, SMS, Data). This antenna has beendevelloped under the specification of OrbcommItalia and its approved for Orbcomm applications.
Italia
1”x14 Adaptor(supplied)
10 mts (33’) coax low losswith BNC connector (supplied)
GPS/TLSP Antenna case andnylon mount for Panasonic
Orbcomm/gps antenna
RA106Solderless connector
Orbcomm Trade Mark is property of the Orbcomm Consortium.
SPECIFICATIONS FOR MARINE ORBCOMM ANTENNAS
MODEL FREQUENCY IMPEDANCE ANTENNA DC GAIN TERMINATIONRANGE LENGTH GROUND
RA106ORBC TX 148 - RX 136 MHz 50 ohms 1 mts YES 3 dB solderless(39”)
3db
-
21
RA1278* 2,40 mts (8’) length.* Glossy GLOMEX fibreglass.* Solid brass antenna elements.* 1/2 wave folded* Electropolished stainless steel ferrule.* Matches the appearance of all other
Glomex 2,40 mts (8’) antennas.* 6 mts (20’) coax cable* PL259 connector.
RA127* 1,50 mts (5’) length.* Glossy GLOMEX fibreglass.* Solid copper antenna element.* 1/2 wave folded* UV resistant nylon ferrule.* 4,5 mts (15’) coax cable.* PL259 connector.
C.B. A
NTEN
NA
S
SPECIFICATIONS FOR MARINE C.B. ANTENNAS
MODEL FREQUENCY IMPEDANCE SWR GAIN MAX. INPUT DC TERMINATIONRANGE (OHMS) (WATTS) GROUND
RA127 27 Mhz citizen band 50
-
NAV
TEX
22
RA164* Antenna for navtex receivers.* No active components.* 3,60 mts (12’) length.* Glossy epoxy UV resistant coated extension.* Base fitting1”x14.* 6 mts (20’) coax cable RG58CU.
3,60 mts (12’) length
RA166/00StainlesssteelSuggestedmount(option)
RA107SSRatchet mountpolishedstainlesssteel(option)
RA116SSRatchet mountpolishedstainlesssteel(option)
RA119Stand-off bracket(option)
SUGGESTED MOUNTS
-
23
DIFFER
ENTIA
L GP
S
& LO
RAN AN
TENN
AS
LC011 - 1 mt. (3’ - 4”) glossy fibreglass
LC010 - 2,40 mts. (8’) - glossy fibreglass
LC012 - 1,5 mt. (5’) stainless steel
THREE DIFFERENT LENGTHS FOR ALL NEEDSManufactured to Glomex standards. These glossy polyurethane coated antennas orelectropolished stainless steel have 3/8" x 24 thread, suitable for all Loran couplerand differential GPS antennas.
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty).In Glomex’s range there are no economic or special series. All the products with lifetime warranty logo are designed and assembled to
standards which respect Glomex’s lifetime warranty.
-
24
EXTEN
SIO
NS
Extension in various lengths for antennas or accessories: standard 1"x14 thread. These glossy epoxy UVresistant coated or stainless extensions can be adapted to every antenna; VHF, CB, AM/FM, GPS, etc. They arethe ideal complement to get the best on-board electronics performance by raising the transceiver antennas.
STAINLESS STEEL FIBREGLASS
RA123
1,50 mt (5’)
RA103/15
150 mm
(6”)
RA103/60
600 mm
(2’)
RA120 2 m
ts (6’8”)
RA149
1,2 mt (4’)
RA150
2,40 mts (8’)
RA122/60
0,60 mt (2’)
RA103/30
300 mm
(1’)
-
25
GP
S EX
TENS
ION
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s rangethere are no economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s
lifetime warranty.
ALUMINIUM
Alluminium extensions in glossy epoxy UV resistant for GPS antennas in various lengths allow the centraland side passage of the GPS antenna cable.
RA129/15
0,15 mt. (6”)
RA129/30
0,30 mt. (1’)
RA129/60
0,60 mt. (2’)
RA129/120
1,20 mt. (4’)
Better supported by RA119
stand - off bracket
-
26
ELECTRIC M
OU
NT
Glomex has come up with the perfect solution to safety control your antenna position. At the touch of aswitch, the Glomex Electric Antenna Mount (EAM) will automatically raise or lower your 8 ft. VHF, GPS,Cellular and Loran antenna a full 90 degrees or any point in between. The EAM unit is a self contained unithoused in an attractive all aluminium epoxy coated module. It is retrofitable into an existing ratchet mountbolt pattern either in a horizontal or vertical position. The unit contains a built in friction lock mechanismwhich allows the antenna to be lowered also manually, helping prevent possible accidental damage to theantenna or EAM. The kit comes with wire harnes and switch, and as with all Glomex products it has a
LIFETIME WARRANTY
SPECIFICATIONS
TENSION SPEED EMERGENCY MATERIAL WEIGHT DIMENSIONS& CURRENT SYSTEM
12VDC 90° - 8 SEC YES EPOXY 2,5 kg H 130 mm (5” 3/16)(3,9 AMPS) UV resistant (6 pounds) W 260 mm (10” 3/8)
Alluminium D 175 mm (6”)
RA185EAMWall mount
CARLING SWITCH
RA187 (option)
RA185EAMDeck mount
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’srange there are no economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which
respect Glomex’s lifetime warranty.
-
27
MO
UN
TSAN
D AC
CES
ORIES
D
ECK
RA135Ratchet mount reinforced nylon UV resistant.Four way ratchet mount forinstallation on deck orbulkhead, locking by knob.Hole for loran or GPS cable.For antennas max 8' in selfsupporting installation builtin feed - thru for coaxcable.Standard thread1"x14.
RA115Ratchet mount reinforced nylon UV resistant. Fourway ratchet mount for installation on deck orbulkhead, locking byhandle. Hole for loranor GPS cable.The exclusive built-infeed-thru allows thepassage of coaxcable. For antennasmax 9' in selfsupportinginstallation.Standard thread1"x14.
RA166/00Ratchet mount stainless steel. Four way ratchet mountfor installation on deck or bulkhead, locking byhandle. Hole for loran or GPS cable. For antennasmax 8' in self supporting installation built in feed-thru
for coax cable. Standardthread 1"x14.
RA165Rail ratchet mount stainless steel. Ratchet design with holefor loran o GPS cable. Vertical or horizontal installation onrails of 7/8" (22 mm) and 1" (25 mm). Designed forantennas up to eight feet. Standard thread 1"x14.
Allow the passage of the GPS andother connectors through the base
RA107SSRatchet mount polishedstainless steel. Four wayratchet mount for installationon deck or bulkhead, lockingby clamp. Hole for loran orGPS cable. The exclusivebuilt in feed-thru allow thepassage of coax cable.Standard thread 1" x 14".
RA116SSRatchet mount polished stainless steel.Four way ratchet mount forinstallation on deck orbulkhead,locking byhandle. Hole for loran orGPS cable. The exclusivebuilt-in feed-thru allows thepassage of coax cable.Standard thread1"x14".
New
New
ELECTROPOLISHED
ELECTROPOLISHED
ELECTROPOLISHED ELECTROPOLISHED
HEAVY DUTY
-
28
MO
UN
TSAN
D AC
CES
ORIES
RAIL
RA134Rail ratchet mount reinforced nylon U.V. resistantwith knob.Ratchet design with holefor loran or GPS cable.Vertical or horizontalinstallation on rails of7/8" (22 mm) and 1"(25 mm). Designedfor antennas up to8 feet (2,40mts).Standardthread1"x14.
RA145Rail mount reinforced nylon U.V. resistant. Forinstallation of GPS antennas on horizontal rails of7/8" (22 mm) and 1"(25mm), (can be usedin addition to RA129extension).Standard thread1"x14.
RA147
Rail ratchet mount reinforcednylon U.V. resistant withknob and 4 inchesextension (100 mm.).Ratchet design with holefor loran or GPS cable.Vertical or horizontalinstallation on rails of7/8" (22 mm) and 1"(25 mm). Designedfor antennas up to 8feet (2,40 mts).Standard thread1"x14.
RA175Rail mount reinforced nylon U.V. resistant. For installation of GPS antennas only on horizontal rail of 22mm (7/8”), 25 mm (1”), and 30 mm, supplied with clamps for all three rail diameters.
Adaptor25 mm (1’)
Adaptor22 mm (7/8”)
Adaptor 30 mm
RA125Rail ratchet mount reinforced nylon U.V. resistant.Ratchet design with hole for loran or GPS cable.Vertical or horizontalinstallation on rails of7/8" (22 mm) and 1"(25 mm). Designedfor antennas up toeight feet. Standardthread 1"x14.
Glomex is the only marine antenna manufacturer offering you alifetime warranty (our competitors offer 1, 2 or 5 years warranty).In Glomex’s range there are no economic or special series. All theproducts with lifetime warranty logo are designed and assembledto standards which respect Glomex’s lifetime warranty.
-
29
MO
UN
TSAN
D AC
CES
ORIES
RA139Reinforced nylon 4 way chart plotter mount.
V9176L Masthead bracket in stainlesssteel. Height 200 mm. (8”).
ELECTROPOLISHED
ELECTROPOLISHED
V9174Universal mount stainless steel.For supporting antennas and extensions.Standard thread 1" x 14, weight 240 grs.Height 100 mm. (4”).
V9175Universal mount reinforced nylon. For GPSantennas only. Can be used in addition to RA129extension. Standard thread 1" x 14, weight 50grs. Height 100 mm. (4”)
V9175OTUniversal mount reinforced nylon. For GPSantennas only. Can be used in addition to RA129extension. Standard thread 1" x 14, weight 27grs. Height 40 mm. (13/8”)
-
30
MO
UN
TSAN
D AC
CES
ORIES
V9171Pipe mounting bracket in stainless steel, thread1”x14. For horizontal and vertical mount.Weight 600 gr. For tubes diam. 25-80 mm.
ELECTROPOLISHED
ELECTROPOLISHED
RA119Stand-off bracket reinforced nylon. Insulatedstand-off bracket for bulkead and rail of Ø 25 mm(1") and 30 mm. Accepts Ø 38,5 mm. (1,5”)antennas and its supplied with inserts forextensions diam. 25 mm (1"), 28,5 mm (1” 1/8)and 30 mm.
RA179Wind indicator 380 mm for mastheador VHF Antennas Aloud series.
V9173Masthead bracket stainless steel. Standard thread1" x 14, weight 330 grs.
-
31
MO
UN
TSAN
D AC
CES
ORIES
RA140Nylon Feed -ThruFor deck passageof one or two coaxial cablesand connectors (RG58 or similar).
RA105Coaxial Gold Plated feed thrusupplied with PVC threadedprotection for the externalconnector (RA138) andPL259 Twist GoldPlated connectorfor totalreliabylity.
RA138PVC threadedprotection forall size PL259connectors
V9101PVC gasket for alluminium surface insulation for V9174 - V9124
RA101Set of 3 rectangular wedges for Glomex ratchetmounts to keep the antenna vertical on inclinedsurfaces.
GO
LDPLATED
RA102Set of 2 round wedges for Glomex universal mountsV9175 - V9174 and V9124 to keep the antenna vertical on inclined surfaces.
1°3°
5° 0°
0°
5°
5°
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
-
32
MO
UN
TSC
HART PLO
TTER
RA136Kit for installation of electronic chart plotters allows installation of the plotters on a vertical tube diam. 25mm. (1”) and 22 mm. (7/8”). The plotter can be adjusted on the vertical and horizontal axis, when notused the mount can be folded by the swivel rail mount installed on the vertical tube.
RA137Kit for installation of electronic chart plotters, allows installation of plotters on a horizontal tube diam. 25mm. (1”) and 22 mm. (7/8”). The plotter can be adjusted on the horizontal axis by the ratchet lock UP.
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
-
33
GROUND PLATES
Glomex Synthesized spherical bronze Ground plates are the necessary interface between electric andelectronic board devices and the dissipator element: water. The Bronze micro-spheres realize a hugecontact surface with the dissipator element (water), given by the sum of the surfaces of all the bronzespheres; in fact, supported by the porosity of each ground plate, water penetrates into the plates touchingthe surface of all the spheres. This kind of construction provides more efficiency than the smooth groundplates. Glomex Ground Plates are provided with bolt and spacers done with the same material (bronze)used for the plates, in order to avoid electro-corrosion phenomena.
RA206 ø 55 mm. (17/8") is conceivedfor tanks in order to neutralizestatic electricity on metal tanksor on metal parts on plastic tanks.
RA202ø 128 mm. (5"). Needsonly one hole instead ofthe two neededto install rectangularplates. Surface 1.5 sq/mt
RA203155 x 51 x 13 mm. (6" x 2" x 1⁄2"). Surface 1 sq/mt
RA204205 x 64 x 13 mm. (8" x 21/2" x 1⁄2"). Surface 1.8 sq/mt
RA205300 x 80 x 13 mm. (12" x 3" x 1⁄2"). Surface 3 sq/mt
Bolts, Screw and SpacersSUPPLIED
RA203
RA204
RA205
RA202
RA206
MODEL DIMENSION GROUND AREAEQUIVALENT
WEIGHTLbs Kg
155x51x13 1 sq/mt 1,2 0,526”x2”x1/2” 11,2 sq/ft
205x64x13 1,8 sq/mt 1,9 0,88”x21/2”x1/2” 20,2 sq/ft
300x80x13 3 sq/mt 3,9 1,65012”x3”x1/2” 39,9 sq/ft
Ø 128 1,5 sq/mt 1,4 0,65” 17 sq/ft
Ø 55 0,3 0,1217/8”
GR
OU
ND
& B
ON
DIN
G P
LATES
-
34
CON
NECTO
RS
RA156TNC male connectorfor RG58/U.
RA132SOLDERLESSPL259 male gold platedconnector for RG58/U.Solderless.
RA133PL258 Double femaleconnectorfor PL259.
RA157Mini UHF maleconnector for RG58/U.
RA163ConnectorF/F female
RA158N male connectorfor RG213/U.
RA159N female to TNC femaleconnector.
RA132PL259 maleconnector forRG58/U. Twist on.
RA132GOLDPL259 malegold platedconnectorfor RG58/U.Twist on.
RA131PL259 maleconnectorfor RG213/U.
RA131GOLDPL259 maleconnector forRG213/U .Gold plated.
RA155BNC femaleto TNCmale connector.
V9144F male gold platedconnector for RG59/Uand V9135Glomex coax.
V9146F 90° connector.
Glomex is the only marine antenna manufacturer offering you a lifetime warranty (our competitors offer 1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products with lifetime warranty logo are designed and assembled to standards which respect Glomex’s lifetime warranty.
-
35
COA
XIA
L CAB
LES
RA152 RA118 RA117 V9135
COAXIAL CABLESCoaxial cables transmit signals to and from theantenna.The coax cables depending from the length and thefrequency insert an attenuation.Poor quality cables will dramatically reduce theefficiency of both antenna transceivers.
DURABILITYAll coaxial cables can lose efficiency over time dueto humidity, as quickly as just a few months afterinstallation.Glomex cables are specifically designed andmanufactured for use in the marine environment to
withstand the negative effects of humidity as longas possible.
SCREENINGScreening of the coaxial cables is the primarydeterminant of signal quality.All Glomex coaxial cables have 100% screening ormeet the mil C17 spec.
LOW ATTENUATIONAll Glomex cables have been developed incooperation with coaxial cables especially toinsure minimal signal distorsion or loss and longterm reliability.
Attenuation dB x 100 mt at 20°C50 MHz 100 MHz 200 MHz 400 MHz 860 MHz 1000 MHz 1750 MHz 2000 MHz
RA152 8,3 11,3 15,9 23,8 38,2 42,9 - -
RA118 2,9 4,3 6,2 9,3 13,8 16,0 - -
RA117 10,4 15,1 22,3 33,8 52,0 57,8- - -
V9135 4,4 5,9 8,2 12,0 17,9 20,0 27,6 29,7
LEGENDCU = Bare copperCU ST = Tinned copperCU AG = Silvered copper 4%AL 3 = Aluminium tape + aluminium +
copperF.CU = Copper tapeAL 2 = Aluminium + polyester tapePE = Solid polyetilenePEE = Foam polyietileneCW = Copperweld
GLOMEX CODE RA152 RA118 RA117 V9135TYPE RG58ALL RG213/U RG58C/U 333R
Impedance Ohm 50 ± 2 50 ± 2 50 ± 2 75 ± 2Capacity pF / m 82 80 98 80Speed ratio % 78 80 66 80Shield dB 100 - 900 MHz > 50 > 80 > 50 >80Structural return-loss dB >20 >35 >35 >30MHz 30 - 300 / 300 - 900 >20 >28 >30 >28Inner conductor resistance 38 3,6 38 18,0Ohm / Km 18 6,0 17 21,5V Max 1000 2500 1900 -Jacket insulation - - - 0,7Conductor Diam. mm 19x0,18 2,50 19 x 0,18 1,55Material CUST CU CUST CUDielectric PEE PE PE PEEDielectric diam.mm 2,95 7,0 2,95 5,0Shield AL 3 - CUST F.CU - CU AL 3 - CUST CUSTShield % 100 98 98 100Jacket - Type / Diam. mm PVC - 5,0 PE - 10,3 PVC - 5,0 PVC - 6,7Minimum folding radius mm 50 130 110 50Weight Kg/100m 3,2 12,8 3,3 3,7Package mts. 100 100 100 100
-
36
DIS
PLAYER
You can easily show all the Glomexproducts on these Glomex displays andimprove your antenna and accessorysales. The dimensions of the display are:
GL600 GL800Base Ø 60 cm Alt. 2,10 mt.Alt. 2,00 mt. Larg. 0,72 mt.
Prof. 0,43 mt.
More information can be obtained bycontacting your local distributor or Glomex.
CODEGL800
CODEGL600
Glomex is the only marine antenna manufactureroffering you a lifetime warranty (our competitors offer1, 2 or 5 years warranty). In Glomex’s range there areno economic or special series. All the products withlifetime warranty logo are designed and assembled tostandards which respect Glomex’s lifetime warranty.
-
37
CRO
SS
REFER
ENCE
V9112
EC
V9112/00
V9112
AB
V9125/00
V9150/00
RA106GRPPB
RA106GRPPB6135
RA106GRPSB18
RA106GRPSB25
RA106SLSPB
RA106SLSB6135
RA106SLSSB18
RA106SLSSB25
RA109GRP
RA109SLS
RA108
RA110
RA111
RA112
RA112CR
RA113
RA114
RA1206CR
RA1206NY
RA1225
RA2022
RA500
RA600
RA700
RA160
RA161
RA1288
RA128
RA1281
RA128/18
RA106ORBC
RA127
RA1278
LC010
LC011
LC012
TV VHF SSB CELL AM/FM ORB GPS+LORANACCESSORIES
50022/0050023/9850023/98EC50023/98SR12GL600GL800GPS/TLSPRA101RA102
RA103/60
RA103/15RA103/30
RA105RA107
RA116RA115
RA117RA118RA119RA120RA122/60RA123RA125RA126RA129/120RA129/15RA129/30RA129/60RA131RA131GOLD
RA132GOLD
RA133
RA132
RA132SOLDERLESS
RA135RA136
RA134
RA139RA138
RA147
RA140RA145
RA149RA150
RA147EXT
RA159RA163
RA155
RA157RA156
RA158
RA152
RA175
RA165RA166
RA179RA185EAMRA187RA201V9101
V9144
V9135V9138V9139
V9113V9116V9117V9123V9124
V9173
V9146V9147V9148V9149V9171
V9175V9174
V9176
V9173TV
RA137
CB
LEGEND
• = SUPPLIED• = SUGGESTED
-
38
GEN
ERA
L TECHN
ICAL
INFO
RMATIO
N
GENERAL
Transmitting and/or receivingequipments include three distinctparts, all equally important.These are: the transceiver, thecoaxial cable with its connectorscarrying the signal to or from theantenna, the antenna itself.To the present day cables,connectors and antennas oftendo not get the attention theydeserve. Yet, their functionalityhas a notable effect on theperformance of the whole system.A wrong antenna, poor qualitycoax cable or a low qualityconnector can waste the moneyspent for good equipment and acareful installation. At everyfrequency, besides being freefrom obstacles, the antenna hasto meet precise electrical andelectronic requirements.Glomex has always made everyeffort to develop design andmanufacturing qualities toimprove antenna performance;besides complying with existinginternational standards. Thismeans better performance of theentire transceiver system. Whenchoosing an antenna, it isadvisable to discuss with yourdealer, about all the problemsconnected with the installationand the type of transceiver. Thiswill let you tackle any problemsbefore they arise. In case this sortof advice is not available, theinformation provided belowshould be helpfull in selecting theright antenna.
decrease gradually their gain,increasing their inclination;furthermore the factor is influ-enced by the frequency, gainlosses are greater with highfrequences and progressivelydiminish reducing the frequency.Accordingly with the greatmajority of the stations, the TVantennas have a horizontalpolarization, it is thereforenecessary to install them in sucha position.The incidence of motion is lessevident with the omnidirectionalmodels; the directional modelshave a reception angle max 50°that gives excellent performanceif the antennas are correctlyoriented but can easily loose thesignal due to rolling, pitching orinclination.All this means television antennasmust be installed horizontally andother antennas vertical as muchas you can.
MOUNTS, ACCESSORIESAND INSTALLATION
Quite often the importance ofaccessories and installation isneglected. Glomex accessoriesare carefully conceived to offerthe correct solution to anyinstallation problem.They are the result of longexperience and testing, withspecial attention to the newtechnologies and to the needs ofthe utilizers. This catalogprovides all the information forthe correct choice, your dealerand technician can provideprecise specifications.
HEIGHT
For VHF and UHF transmissions,range, the higher the antenna ispositioned, better are theperformances.Following such instructions it willbe easy to make the right choice,original Glomex cables andaccesories as well as the correctinstallation will be then decisivefactors for obtaining the bestresult.
GAIN
It is the most important specs ofthe antenna. It is indicated in DB;at higher figure corresponds agreater range.On the other hand, a high gaindecreases the radiation pattern;this means that low gainantennas are less influenced byrolling and pitching of a boat;increasing the gain, themovement of the boat may causea temporary signal's reduction.These are the reasons why onplaning boats it is suggested toinstall high gain antennas, whileon sailboats, with the mastheadsubject to swaying, the bestwould be, when ever possible anantenna ground plane (RA108).
POLARIZATION
Each antenna has its own polar-ization, and also its preferentialworking plane, to be respectedas much as possible.For example VHF, SSB, Loran, CBand cell-phone antennas have avertical polarization and
RA1225
RA1206 and similar antennas
TYPICAL RANGE GAIN PATTERN
9 db6 db
3 db
-
39
GEN
ERA
L TECHN
ICAL
INFO
RMATIO
N
COAX CABLE CUTTING
Cutting the Glomex antennacoax cable is no problem, justremember that a shorter cableenhance the performance of theantenna.The cable can be cut following asimple rule, do not cut the cableless than 2 mts (7’) on VHFantenna. Avoid to cut the cableon C.B. antennas any problemto cut the coax on TV antennas.
DC GROUND
It’s referred to the design of theantenna, for avoiding staticelectricity buildup on the antennaelement, in order to reduce thenoises on the receiver. Whentested with an ohm-meter allGlomex VHF, CELL-PHONE andCB antennas will show continuity.ALL GLOMEX VHF AND CBANTENNAS HAVE A BUILT-INGROUND.
SWR (Stationary Wave Return)
All the SWR ratios indicated inthis catalog depend uponantenna location on the boat. Allantennas have to be clear in alldirections and at least 1 meteraway from metallic parts. TheSWR, when tested, should notexceed 1:1,3 with the antennainstalled on the boat.
The best position for the antennais to center it as low as possibleat the center of the boat.
SATELLITE TELEVISION ANTENNASINSTALLATION BASIC RULES
-
40
GEN
ERA
L TECHN
ICAL
INFO
RMATIO
N
top related