manual scaner microtek 6100
Post on 07-Apr-2018
258 Views
Preview:
TRANSCRIPT
-
8/6/2019 Manual Scaner Microtek 6100
1/53
Welcome!
The latest Microtek scanners are equipped with Smart-Touch buttons foeasier access to scanner functions. Scanners with the Smart-Touch butthave these configurations:
q 3 Smart-Touch buttons: Scan, Copy, and E-mail.
q 5 Smart-Touch buttons: Scan, Copy, E-mail, OCR, and Scan-to-Weor Scan, Copy, E-mail, Setup, and Cancel.
q 7 Smart-Touch buttons: Cancel/Setup, Scan, Copy, E-mail, OCR,Scan-to-Web, and Custom.
Microtek scanners assist users by simplifying scanning tasks and increasproductivity with just the touch of a button. These "Smart-Touch buttonprovide an intuitive and easy method to quickly and easily scan images
For example, to copy a stack of documents, simply place the first page the scanner bed, and press the Copy button. Once the first page has bescanned, place the next page and press the Copy button again. Thescanner will work like a copier with your printer, printing the documentsone after another with no interruption.
The parameters for each button can be defined through the Microtek
Scanner Configuration (MSC) utility. When you have completed specifyi
your scan setting requirements, you can then perform several taskscontinuously with just a simple touch.
Launching and exiting the Microtek Scanner Configuration (MSC) utility
How the scanner buttons work
le:///D|/msc/Welcome.htm (1 of 2) [8/15/03 3:13:37 PM]
-
8/6/2019 Manual Scaner Microtek 6100
2/53
Welcome
le:///D|/msc/Welcome.htm (2 of 2) [8/15/03 3:13:37 PM]
-
8/6/2019 Manual Scaner Microtek 6100
3/53
-
8/6/2019 Manual Scaner Microtek 6100
4/53
Using the MSC utility
Using the MSC utility
When you launch the MSC, the Microtek Scanner Configuration (MSpanel appears. Depending on the scanner model you are using, you willsee 3 tabs (Scan, Copy or E-mail), 5 tabs (Scan, Copy, E-mail, OCR, or
Web), or 6 tabs (Scan, Copy, E-mail, OCR, To Web, or Custom). Click a
of the tabs to view or customize the button settings according to yourspecific requirements.
le:///D|/msc/Using_the_MSC_utility.htm (1 of 2) [8/15/03 3:14:45 PM]
-
8/6/2019 Manual Scaner Microtek 6100
5/53
-
8/6/2019 Manual Scaner Microtek 6100
6/53
Customizing the Scan panel
Customizing the Scan panel
Select the topic you wish to view from the links below:
Original
Purpose
Scan Type
Send to Application
Scan Frame
Destination
OK button
le:///D|/msc/panel_Scan.htm (1 of 4) [8/15/03 3:15:09 PM]
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?- -
8/6/2019 Manual Scaner Microtek 6100
7/53
-
8/6/2019 Manual Scaner Microtek 6100
8/53
-
8/6/2019 Manual Scaner Microtek 6100
9/53
Customizing the Scan panel
Filename: Refers to the prefix or root name in a series of filenames. By default, the filename is "Image". If the TIFF file format is selected, the scanned images will beautomatically identified as "Image001.tif", "Image002.tif", etc. You can change thedefault root filename to uniquely label your scan jobs.
File Format: PDF is the default image file format.
Reset button
Clears all the parameters you have just made under the Scan tab panel; all theparameters are reset to their default settings.
Cancel button
Abandons the parameters you have just made under the Scan tab panels; all theparameters are restored to their previous settings.
OK button
Confirms and saves the parameters currently specified for the Scan Smart-Touch buton your scanner. The next time you press the Scan button, the defined and savedsettings are retrieved as your current settings.
Help (?) button
Provides answers to any queries regarding the MSC utility and scanner button functio
Simply click the Help (?) button located at the bottom left corner of the MSC panel. Tsearch for a topic, click the Index tab, then type a word associated with your questioYou will be prompted for a short definition that will link you to a related topic.
le:///D|/msc/panel_Scan.htm (4 of 4) [8/15/03 3:15:09 PM]
-
8/6/2019 Manual Scaner Microtek 6100
10/53
-
8/6/2019 Manual Scaner Microtek 6100
11/53
-
8/6/2019 Manual Scaner Microtek 6100
12/53
Customizing the Copy panel
Thumbnail of the Scan frame: Shows the selected scan frame. If AutoCrop is selected, the selected scan frame of the thumbnail is disabled.
Copy Quality
Selects your printout quality. The higher the image quality, the longer th
scanning time and the greater disk space required. Microtek recommendthat you choose "Normal" quality for 150 dpi printing, "Best" for 600 or 3dpi printing, and "Draft" for 100 dpi printing.
Scaling
Enlarges or reduces an image. Specifying scaling parameters above 100%will enlarge the scanned image, while specifying scaling parameters belo100% will reduce the scanned image. Scaling range is between 25% and400%.
Copies
Defines the number of printout (1 to 99) copies required for a current scjob. This setting can be superseded by the setting in your Printer Setupdialog box if you have checked the check box on "Show printer settingdialog box before scan."
Show printer setting dialog box before scan
Check this option if you want to display the printer dialog box before youstart to print. The number of printout copies may be redefined in this diabox. Uncheck this option if you do not want to bring up the printer dialogbox and make printout quantity based on the "Copies" setting.
OK button
Confirms and saves the parameters currently specified for the Copy SmaTouch button on your scanner. The next time you press the Copy buttonthe defined and saved settings are retrieved as your current settings.
Cancel button
le:///D|/msc/panel_Copy.htm (3 of 4) [8/15/03 3:15:52 PM]
-
8/6/2019 Manual Scaner Microtek 6100
13/53
-
8/6/2019 Manual Scaner Microtek 6100
14/53
-
8/6/2019 Manual Scaner Microtek 6100
15/53
-
8/6/2019 Manual Scaner Microtek 6100
16/53
-
8/6/2019 Manual Scaner Microtek 6100
17/53
-
8/6/2019 Manual Scaner Microtek 6100
18/53
-
8/6/2019 Manual Scaner Microtek 6100
19/53
-
8/6/2019 Manual Scaner Microtek 6100
20/53
-
8/6/2019 Manual Scaner Microtek 6100
21/53
-
8/6/2019 Manual Scaner Microtek 6100
22/53
-
8/6/2019 Manual Scaner Microtek 6100
23/53
-
8/6/2019 Manual Scaner Microtek 6100
24/53
-
8/6/2019 Manual Scaner Microtek 6100
25/53
To Web panel
Account Manager
The Account Manager button is used for managing your exclusive photosharing account from a Microtek provided website.
To register for a free photo-sharing account, click the Account Managerbutton. When the Account Manager dialog box appears, select a photo-sharing website from the Web Site option, then click the Create a newaccount button. Follow the online registration, then close the Internetbrowser after you have completed the registration process and you willreturn to the Account Manager dialog box. You will need to activate youphoto-sharing account (under the Account Settings) pane after you havesuccessfully completed the online registration.
To activate a new account and/or add an existing account, click the Add
button, key in your username and password, and then click Close. Whenyou return to the MSC panel's "To Web" tab -- click OK to apply thesettings that you have just made.
Scan Frame
Select either Auto Crop or Fixed Size.
Auto Crop: If Auto Crop is selected, the scanner first executes a previetries to determine the size of the original image, then performs the scanand crops the full scan frame to fit the image automatically.
Fixed Size: If Fixed Sized is selected, the Auto Crop function is disabledaccordingly, in this situation, you select the image size from the list. Wha scan is performed, the selected scan frame size is framed on the top-center of the glass bed. Thus, it is the important that you position theoriginal on the top-center of the glass bed. A centering marker is provid
on the top ruler to guide you with alignment.
Thumbnail of the Scan Frame: Shows the selected scan frame. If Auto Cis selected, the selected scan frame of the thumbnail is disabled.
Saved files in Local Disk
Scanned image(s) will be saved under the default "My Images" folder or
le:///D|/msc/To_Web_panel.htm (3 of 5) [8/15/03 3:18:02 PM]
-
8/6/2019 Manual Scaner Microtek 6100
26/53
To Web panel
a specified local disk first before it is uploaded to the photo-sharingwebsite.
Save In: Saves the image to the current folder destination. To change tfolder location, click the folder icon at the right end of the existing path.
Filename: Refers to the prefix or root name in a series of file names. Bdefault, the root file name is "Image" and default format is JPEG. Thescanned images will be automatically identified as "Image001.jpg","Image002. jpg ", etc. You can change the default root file name touniquely label your scan jobs.
File Format: JPEG is the file format available -- as this is the standardimage format widely used on the web.
OK button
Confirms and saves the parameters currently specified for the Scan-to-WSmart-Touch button on your scanner. The next time you press the ScanWeb button, the defined and saved settings are retrieved as your currensettings.
Cancel button
Abandons the parameters you have just made under the To Web tabpanels; all the parameters are restored to their previous settings.
Reset button
Clears all the parameters you have just made under the To Web tab panall the parameters are reset to their default settings.
Help (?) button
Provides answers to any queries regarding the MSC utility and scannerbutton functions. Simply click the Help (?) button located at the bottom corner of the MSC panel. To search for a topic, click the Index tab, thentype a word associated with your question. You will be prompted for ashort definition that will link you to a related topic.
le:///D|/msc/To_Web_panel.htm (4 of 5) [8/15/03 3:18:02 PM]
-
8/6/2019 Manual Scaner Microtek 6100
27/53
-
8/6/2019 Manual Scaner Microtek 6100
28/53
-
8/6/2019 Manual Scaner Microtek 6100
29/53
-
8/6/2019 Manual Scaner Microtek 6100
30/53
-
8/6/2019 Manual Scaner Microtek 6100
31/53
ower saving page
then type a word associated with your question. You will be prompted foshort definition that will link you to a related topic.
le:///D|/msc/Power_saving_page.htm (3 of 3) [8/15/03 3:19:22 PM]
-
8/6/2019 Manual Scaner Microtek 6100
32/53
-
8/6/2019 Manual Scaner Microtek 6100
33/53
-
8/6/2019 Manual Scaner Microtek 6100
34/53
-
8/6/2019 Manual Scaner Microtek 6100
35/53
-
8/6/2019 Manual Scaner Microtek 6100
36/53
can page
as a single file.
OK button
Confirms and saves the parameters currently specified for the CustomSmart-Touch button on your scanner. The next time you press the Custobutton, the defined and saved settings are retrieved as your currentsettings.
Cancel button
Abandons the parameters you have just made under the Custom tabpanels; all the parameters are restored to their previous settings.
Reset button
Clears all the parameters you have just made under the Custom tab panall the parameters are reset to their default settings.
Help (?) button
Provides answers to any queries regarding the MSC utility and scannerbutton functions. Simply click the Help (?) button located at the bottom
corner of the MSC panel. To search for a topic, click the Index tab, thentype a word associated with your question. You will be prompted for a shdefinition that will link you to a related topic.
le:///D|/msc/Scan_page.htm (5 of 5) [8/15/03 3:19:45 PM]
-
8/6/2019 Manual Scaner Microtek 6100
37/53
Launch application page
Launch Application page
Select "Launch Application" from the Custom Function option menu. TheLaunch Application function allows you to launch the installed applicatioby pressing the scanner's Custom button.
Your application for launching can be an image editor, web browser,Acrobat program or any other application available on your disk. Thedefault application that is launched is ScanWizard 5.
Application
le:///D|/msc/Launch_application_page.htm (1 of 3) [8/15/03 3:20:23 PM]
-
8/6/2019 Manual Scaner Microtek 6100
38/53
Launch application page
Shows the selected application for launching.
Application Path
Shows the applications file location in your computer.
Custom button
Adds or deletes the application from the Application alias list. Please taknote that you should retain at least one application on the list; otherwisthe Custom button on the scanner will not work.
Click the Custom button to bring up the "Choose Application" window. TMSC utility starts to search for the available software programs on yourhard disk and displays them in the left panel of the window.
le:///D|/msc/Launch_application_page.htm (2 of 3) [8/15/03 3:20:23 PM]
-
8/6/2019 Manual Scaner Microtek 6100
39/53
-
8/6/2019 Manual Scaner Microtek 6100
40/53
-
8/6/2019 Manual Scaner Microtek 6100
41/53
-
8/6/2019 Manual Scaner Microtek 6100
42/53
-
8/6/2019 Manual Scaner Microtek 6100
43/53
-
8/6/2019 Manual Scaner Microtek 6100
44/53
Copy button
Copy button
1. Click the Copy button on your scanner. This will scan the image ansend it directly to your default printer for printing a "hard copy"similar to what a photocopier does.
2. To customize the parameters for the Copy button, specify yourpreferred settings (No. of copies, Printer destination, etc.) under thCopy tab of this MSC utility.
le:///D|/msc/b_Copy.htm [8/15/03 3:23:38 PM]
-
8/6/2019 Manual Scaner Microtek 6100
45/53
-
8/6/2019 Manual Scaner Microtek 6100
46/53
OCR button
OCR button
Press the OCR button on your scanner. This will automatically scan,recognize and convert the document, save it to a file, and delivers it to specified application for editing -- fully based on the MSC settings. Thesaved images are stored on your local disk, and also appear as a shortcunder the My Images folder on your desktop.
To OCR another document or multiple documents/pages using the samesetting, press the OCR button again. Repeat this until all OCR tasks arecompleted, or until you need to specify new settings for the next job.
To customize the parameters for the OCR button, specify your settings(OCR Language, Document Type Size, Scan Type, Application, Destinati
File Format etc.) under the OCR tab of MSC utility.
le:///D|/msc/OCR_button.htm [8/15/03 3:24:36 PM]
-
8/6/2019 Manual Scaner Microtek 6100
47/53
To Web button
Scan-to-Web button
Make sure that you are connected to the Internet and you have alreadyregistered/sign-in for a free photo-sharing account from a Microtekprovided website, before pressing the Scan-to-Web button on yourscanner.
Press the Scan-to-Web button on your scanner -- this will automaticallyscan, save the scanned image to file, connect, and instantly upload it toyour Photo-sharing website based on the MSC settings. The savedimages are stored on your local disk. You can also retrieve the savedimages by double-clicking the default folder icon labeled "My Images" oyour Windows desktop.
To upload another image or several images using the same setting, prethe Scan-to-Web button again. Repeat this until all the photos have beeuploaded to your web album, or until you need to specify new settings fthe next job. Note that all uploaded photos are automatically saved onyour hard disk before they are sent to the website.
To customize the parameters for the Scan-to-Web button, specify yoursettings (Web Site, Purpose, Scan Frame, Filename, File Format etc.)
under the tab " To Web" of this MSC utility.
le:///D|/msc/To_Web_button.htm [8/15/03 3:25:04 PM]
-
8/6/2019 Manual Scaner Microtek 6100
48/53
etup button
Setup button
Press the Setup* button on your scanner. This will automatically launchtheMicrotek Scanner Configuration (MSC) utility.
When you launch the MSC, the Microtek Scanner Configuration (MSC)panel appears. Click any of the tabs to view or customize the buttonsettings according to your respective requirements.
*The Setup (not Cancel/Setup) button is applicable only to earlier Microscanner models.
le:///D|/msc/Setup_button.htm [8/15/03 3:25:27 PM]
-
8/6/2019 Manual Scaner Microtek 6100
49/53
Cancel button
Cancel button
Press the Cancel* button on your scanner. This will quickly stop andabandon any scan job action and exit ScanWizard 5. While activating thMSC, pressing this button will exit the MSC utility.
*The Cancel (not Cancel/Setup) button is applicable only to earlierMicrotek scanner models.
le:///D|/msc/Cancel_button.htm [8/15/03 3:26:07 PM]
-
8/6/2019 Manual Scaner Microtek 6100
50/53
-
8/6/2019 Manual Scaner Microtek 6100
51/53
Custom button
Custom button
When you press the Custom button on your scanner, your scanner startto perform the function that was previously defined in the Custom Panethe MSC utility.
Power Saving function button
Press the Custom button on your scanner. This will change the lampcurrent status. The lamp current status can be checked by choosing the"Power Saving" function under "Custom" in the MSC utility.
Scan function button
Press the Custom button on your scanner. This will automatically scan asave your image, based on the "Scan" function settings under "Custom"
the MSC utility.
To customize the parameters for the Custom button - Scan function,specify your "Scan" function settings under "Custom" in the MSC utility.
Launch Application function button
Press the Custom button on your scanner. This will automatically launchinstalled application, based on the "Launch Application" function setting
under "Custom" in the MSC utility.
To customize the parameters for the Custom button - Launch Applicatiofunction, specify your "Launch Application" function settings under"Custom" in the MSC utility.
le:///D|/msc/Custom_button.htm [8/15/03 3:28:06 PM]
-
8/6/2019 Manual Scaner Microtek 6100
52/53
When I chose Auto Crop under the MSC utility, the scanner was unable to recognize or detect my scan material.
When I chose Auto Crop under the MSC utility, thescanner was unable to recognize or detect my scanmaterial.
Instead of using than using the Auto Crop function under the Scan Fracategory, you can select Fixed Frame instead, and choose the closest si
that matches your scan material from the Fixed frame options. If youcannot find anything from the list of options, Microtek recommends thatyou close the MSC utility and launch ScanWizard 5.
le:///D|/msc/qa_Auto_Crop_.htm [8/15/03 3:39:14 PM]
-
8/6/2019 Manual Scaner Microtek 6100
53/53
My printer keeps on producing the wrong unmber of copies. What should I do?
My printer keeps on producing the w rong number ofcopies. What should I do?
Your MSC Copy tab panel setting for number of copies is in conflict withthat of your printer's setup dialog box. If you want your printer to followthe MSC setting for number of copies, then do NOT check the "Show
printer setting dialog box before scan" check box in the Copy tab panel.Otherwise, check the check box and your printer will ignore your MSCsettings and follow the number of copies set in the printer setup dialogbox.
top related