machine line drawings for reference - zamboni company · 520 525 526 these references should be...
Post on 16-Mar-2020
4 Views
Preview:
TRANSCRIPT
1 ft
MODEL
552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
Machine Line Drawings for Reference
1 ft
©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
Machine Line Drawings for Reference MODEL
552
1 ft
520525526
©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
= 1 foot
Scale is 1" = 1' on 11” x 17” paper and 1" = 1.54' on 8.5” x 11” paper MODEL
552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
Machine Line Drawings for Reference
1 ft
520525526
MODEL
552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
Machine Line Drawings for Reference
520525526
These references should be considered as approximate so for accurate measurements, you should examine and measure the machine you intend to wrap/decal.
Following are some of the notable differences between our 500 series machines:
• seat support assembly
• dash
• vertical auger housing motor mount
• fiberglass lid indents
• fiberglass side covers
Some machines may have a plow mounting apparatus on the front which may obscure part of the front panel. All safety labels should be left uncovered or replaced once the wrap/decal is in place.
Should you have any questions, please feel free to contact us.
©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.
MODEL
552
top related