kravetdraperyhardware · vintage chic sold individually. all finials listed are suitable for use...
Post on 15-Jul-2020
4 Views
Preview:
TRANSCRIPT
kravetdraperyhardware
VINTAGE CHIC
• 5 finial styles; 4 wood finishes• 5 wood finishes – 4 Standard; 1 addtional Vintage Ring finish• 2” wooden rod size; available in 3 lengths• Coordinating rings and brackets• In-Stock Collection
kravetdraperyhardware
At a Glance
FINISHESAll natural wood used in the Vintage Chic collection may be subject to variations from piece to piece due to the natural materials used.
All photography is, at best, a representation of color. Actual finishes may vary slightly.
RECOMMENDATIONSPlease consult a professional installer for the application of all drapery hardware products. We recommend a minimum of three support brackets for every 8 feet of rod length.
When a wood rod is re-cut to be made smaller, a new opening/hole will need to be made.That opening should be 33/1616 or 5mm to allow for the finial screw to fit properly into the drapery rod.
A double sided screw must be used to join two wood rods together. Whenever two wood rods are connected, a bracket is required for additional support.
VINTAGE CHIC
4 / D R A P E R Y H A R D WA R E / K R A V E T
VINTAGE CHIC
AMFORAFINIAL
FINIA
LS
Sold individually.All finials listed are suitable for use with Vintage Chic 2” diameter wooden rods.
FINIALSFINIALS
FINIA
LS
SCEPTERFINIAL
VINTAGEROSEFINIAL
6”L
533//44”L
633//44”L
4”W
377//88”W
311//22”W
JAVAHDW20133-66
JAVAHDW20130-66
JAVAHDW20128-66
CHESTNUTHDW20133-616
shown left
CHESTNUTHDW20130-616
shown left
CHESTNUTHDW20128-616
shown left
PICKLED OAKHDW20133-16
PICKLED OAKHDW20130-16
PICKLED OAKHDW20128-16
DRIFTWOODHDW20133-106
DRIFTWOODHDW20130-106
DRIFTWOODHDW20128-106
D R A P E R Y H A R D WA R E / K R A V E T / 5
VINTAGE CHICSold individually.All finials listed are suitable for use with Vintage Chic 2” diameter wooden rods.
FINIALSFINIALSFIN
IALS
RUSTICEND CAP
VINTAGEKNOTFINIAL
111//22”L
411//22”L
211//22”W
311//22”W
JAVAHDW20131-66
JAVAHDW20132-66
CHESTNUTHDW20131-616
shown left
CHESTNUTHDW20132-616
shown left
PICKLED OAKHDW20131-16
PICKLED OAKHDW20132-16
DRIFTWOODHDW20131-106
DRIFTWOODHDW20132-106
6 / D R A P E R Y H A R D WA R E / K R A V E T
VINTAGE CHIC
Double sided screw available for joining wood rods: HDW20343.All 2” diameter rods listed are suitable for use with Vintage Chic finials and drapery rod brackets.
VINTAGE WOOD RODSVINTAGE WOOD RODS
PICKLED OAK4 FT: HDW20125-166 FT: HDW20127 -168 FT: HDW20126-16
DRIFTWOOD4 FT: HDW20125-1066 FT: HDW20127 -1068 FT: HDW20126-106
CHESTNUT4 FT: HDW20125-6166 FT: HDW20127 -6168 FT: HDW20126-616
JAVA4 FT: HDW20125-666 FT: HDW20127 -668 FT: HDW20126-66
VINTA
GE
RO
DS
D R A P E R Y H A R D WA R E / K R A V E T / 7
VINTAGE CHIC
355//88”H
BRACKETSBRACKETS
RIN
GS
/BR
AC
KE
TS
All brackets listed are suitable for use with Vintage Chic 2” diameter wooden rods.In order to adjust the overall projection length of the Adjustable Loop Bracket, the wooden post componentof the bracket must be cut to the desired length. Please consult a professional installer where applicable.
RINGSRINGS
DRIFTWOODHDW20121-106
CHESTNUTHDW20121-616
JAVAHDW20121-66
AGED IRONHDW20121-81
PICKLED OAKHDW20121-16
Sold individually.All rings listed are suitable for use with Vintage Chic 2” diameter wooden rods.
Inside dia: 277/1616”; Outside dia: 3 11/44”
STANDARD BRACKET
111//22”W
JAVAHDW20123-66
JAVAHDW20124-66
CHESTNUTHDW20123-616
shown left
CHESTNUTHDW20124-616
shown left
PICKLED OAKHDW20123-16
PICKLED OAKHDW20124-16
DRIFTWOODHDW20123-106
DRIFTWOODHDW20124-106
4”
455//88”H
PROJECTION
933//44”L
411//22”- 811//44”
PROJECTION
ADJUSTABLELOOP BRACKET
kravet® US 800 648 5728 Ext. 2519 CAN 800 535 3258 MX 01 800 777 1569For the complete Drapery Hardware catalog, visit kravet.com/drapery-hardware
top related