kia sportage navigation system installation - cable tie fan · kia sportage navigation system...
Post on 20-Jul-2018
233 Views
Preview:
TRANSCRIPT
Kia Sportage Navigation System Installation Powered by Smartauto24.com
1. Stock radio system
2. Remove the screw cover
3. Remove the two screws on left and right side
4. Remove the left air condition vent cover
5. Remove the right air condition vent cover
6. Remove the left air condition vent cover
7. Remove the both side
8. Remove the screws on the stock radio
9. Remove the frame on the stock radio
10. Remove the plugs
11. Remove the screws on the stock radio
12. Unplug the harnesses on stock radio
13. Disassembling completed!
14. Origital stock harnesses
15. Connect the harnesses to Smartauto24 navi system, it’s plug and play!
16. Connect other the cables and antennas for GPS and radio and camera etc..
17. Screw the navi system
18. install the frame
19. Install the left and right vent cover
20. Installation Complete!
Please send email to support@smartauto24.com if there is any question.
top related