kertas 2 pep pertengahan tahun ting 5 terengganu 2013
Post on 10-Sep-2015
241 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
SKEMA FIZIK TAFSIRAN SUMATIF 2 TAHUN 2013
Skema peperiksaan Sumatif 1 SPM 2013 Physics Paper 1
1 C 26 D 2 D 27 D 3 A 28 C 4 C 29 C 5 D 30 B 6 C 31 B 7 B 32 B 8 D 33 A 9 C 34 B 10 C 35 A 11 B 36 C 12 D 37 D 13 A 38 A 14 B 39 B 15 B 40 C 16 D 41 A 17 A 42 B 18 C 43 A 19 B 44 A 20 A 45 D 21 B 46 D 22 B 47 B 23 B 48 C 24 C 49 A 25 B 50 A
www.banksoalanspm.com
-
KERTAS 2 Question 1
Part Mark Answer Note (a) 1 Glass bulb // Mercury bulb (b) 1 Thermal equilibrium (c) 1 2o C (d) 1 Mercurydoes not stick to the glass
TOTAL 4 Question 2 Part Mark Answer Note
(a)(i) 1 Simple Mercury Barometer (a) (ii) 1 High density
(b) 1 1
P = hg = 0.76m x 1.36 x 10 4 kgm-3 x 10 Nkg = 103 360
-1 Without unit.
(c) 1 Same as the level of mercury in the beaker TOTAL 5
Question 3
Part Mark Answer Note (a) 1 Something that can change the state of motion or
change the size / shape of an object.
(b)(i) 1 W = 40 x 10 N // 400 N Ans. with correct unit
(b)(ii) 1 1 1
F = W + Fy // F = W + Fp sine 30 = 400 + 50 sine 30
o o
= 425 N // 400 + 25
Ans. with correct unit
(c) 1 Greater vertical resultant force acted downwards. TOTAL 6
Question 4
Part Mark Answer Note (a) 1 Reflection (b) 1
1 widen field view Upright
(c) (i) 1 1 1
(c) (ii) 1 The brightness is reduced TOTAL 7 Question 5
www.banksoalanspm.com
-
Part Mark Answer Note (a) 1 Longitudinal wave
(b)(i) (b)(ii) (b)(iii)
1 1 1
Thickness 5.1 5.2
(c) (i)
(c)(ii)
1
1
The thicker the string , the smaller the frequency // Inversely proportional The higher the frequency,the higher the pitch // directly proportional
(d) 1
1 2
101650 xv=
V = 330 ms
-1
TOTAL 8 Question 6
Part Mark Answer Note (a) 1 Resistance is the ratio of potential difference to the
current flow // a device that resists/impedes the current/electron flow in a circuit.
(b)(i) 1 Cross sectional area 6.2 > 6.1 (b)(ii) 1 Potential difference 6.1 > 6.2 (b)(iii) 1 Current for both circuits are the same. (c)(i)( 1 Resistance 6.1 > 6.2 (c)(ii) 1 As the cross sectional area increases, resistance
decreases
(d) 1 1
Decreases Because total/effective resistance decreases
TOTAL 8 Question 7
Part Mark Answer Note (a) 1 Archimedes principles 1 (b) 1 Q>P 1 (c) 1 Increase the length of the glass tube//increase the
volume of the glass bulb 1
(d)(i) 1 Safety guideline 1 (d)(ii) 1 1.7 x109x10 = 1.03x103
1.308x10xVx10
6 m1
3 1 (e) (i) 1
1 Size /Volume of the ship Increase buoyant force
1
(e) (ii) 1 1
Increase power //small density material Increase engine thrust//lighter
TOTAL 8 Question 8
www.banksoalanspm.com
-
Part Mark Answer Note (a) 1 Vector quantity
(b)(i) 1 1
a = 2.5
0 20
= - 8 ms-2 // 8 ms
-2 (b)(ii) 1
1 s = (0+20)(2.5) 25 m
(c) 1 1
Mass tanker > car The higher the mass the smaller the acceleration//mass inversely proportional to the acceleration
(d)(i) 1 1
Many //large number of tank// 5 small tanks reduce inertia // small mass inertia spill
(d)(ii) 1 1
Many //large number of tyre Stable //low pressure//increase surface area //better grip
(e) 1 P TOTAL 12
www.banksoalanspm.com
-
Question 9 Sect. Mark (a) 1 1 State the meaning of energy correctly
Ability to do work. (b)(i)
(b)(ii)
6 1 State the correct comparison of the positions Position of the girl at point K is higher than at point M. 2 State the correct comparison of the gravitational potential energy The gravitational potential energy of the girl at point K > at point M. 3 State the correct comparison of the velocity The velocity of the girl at point M > at point K. 4 State the correct comparison of the kinetic energy The kinetic energy at point M > at point K. 5 State the correct relation regarding to gravitational potential energy and kinetic energy As the gravitational potential energy decrease, the kinetic energy increases. 1 State the correct physics principle The principle of conservation of energy
(c) 3 1 State the correct happens of velocity Velocity increases. 2 Give the correct reason Because the kinetic energy increases // Gravitational energy decreases // Height position of the girl decreases. 3 Give the correct total energy at point L Total energy at point L is maximum / gravitational potential energy + kinetic energy.
(d) 10
Give the correct techniques of using force and correct reason 1 Use the high force 2 Work done by athlete is high // Work obtained by iron ball is high (W=Fs) Give the correct techniques of distance of hand movement and correct reason 3 Hand movement is distant / maximum / longer before release the iron ball 4 Work done by athlete is high // Work obtained by iron ball is high (W=Fs) State the correct techniques of position of hand and the correct reason 5 The position of hand from ground is high 6 To gain the total work / energy when released the iron ball State the correct angle of projection and give the correct reason 7 The angle of projection is 458 The time to fly increases
o
State the correct chosen of iron ball and give the correct reason 9 Choose the smooth surface of iron ball 10 Reduceair friction / air resistance.
Total : 20
www.banksoalanspm.com
-
QUESTION 10 Mark Answer Note
(a) 1 The distance from the point where the parallel rays converge to the optical centre of the lens
(b)
1 1
1
1
1
Lens M has a bigger thickness than L The light rays that pass through M bend through a larger angle The focal length of lens M is shorter The shorter the focal length the higher the power of lens The higher the thickness, the higher the power of lens
(c)
1 1 1
1
Focus the distance object using lens Adjust until sharp image form on the cardboard Measure the distance between the lens and the cardboard ,f Calculate p=1/f
(d)
1,2
3,4
5,6
7,8
9,10
Design Reasons
Both eyepiece and objective lens is a
convex lens
Converge the light
High power lenses To magnify the image The distance between two lenses is greater than the sum of their focal length
To produce larger image
The specimen should be placed between F and 2F of the objective lens
To produce larger image of objective lens / first image
Source of light / concave mirror under
the specimen Bright image can be
form
Total 20 Question 11 Answer Note Part Mark
www.banksoalanspm.com
-
(a) 1 Temperature is the degree of the hotness of an object
(b) (i) 1 1 1
1
Initially, ice absorbed heat from surrounding To break the bonds between molecules After that heat is used to increase the kinetic energy of molecules, temperature increase Finally water achieve thermal equilibrium with surrounding air
(b) (ii) 1,1
temp Time
(c) 1,1
1,1
1,1
1,1
1,1
Characteristics Explanation Thin glass walled bulb
Heat can transfer easily
Small diameter of capillary tube
Liquid can expand at high rate
Thick glass-bore stem
Stronger, not break easily
High boiling point
Not evaporate easily at high temperature
Chosen : R because has thin glass walled bulb, small diameter of capillary tube, thick glass-bore stem and high boiling point
(d) 1
1 1
= 100 60 - 10
25 - 10
= 30 o = 303 K
C
Total 20
Q12
www.banksoalanspm.com
-
Sect. Mark (a)(i)
(b)(ii)
(b)(ii)
1
2
Max 4
1 State the meaning of diffraction correctly The bending spreading of waves after passing through aperture or the edge of an obstacle. 1 Shows the correct patterns of diffractions Draw two circular water waves after passed through two small apertures. 2Shows the correct pattern of interference. The drawing shows the correct pattern of interference of water wave. 1State the correct coconditionof phenomenon interference. Two coherent sources of waves coincide. 2State the correct coincide of crests or trough Crest coincide crest // Trough coincide trough. 3State the constructive interference correctly. Constructive interference occurred. 4State the correct coincide of crest and trough. Crestcoincide trough. 4State the destructive interference correctly. Destructive interference occurred.
(c) 2 1 State the correct situation happensto the boat. The boat move upwards and downwards repetitively. 2 State the correct explanation/reason. Antinodes region, constructive interference occurred
(c) 10
State the correct region and explanation/ correct reason 1 Bay 2 Still water // Energy of wave is spreading State the correct retaining wall and correct reason 3 High retaining wall 4 Withstand to the big waves. State the correct shape of retaining wall and the correct reason 5 Slope retaining wall with holes 6 To absorb the energy of waves // To prevent high energy of waves. State the correct structure of rock and give the correct reason 7 Many big rocks in water nearby the beach. 8 Diffraction occurs and spreading the energy of waves. State the correct choice of region and give the correctreasons. 9 Region P 10 Bay, high retaining wall, slope shape retaining wall with holes and has many big rocks in water nearby the beach.
Total : 20 Ujian sumatif Mei 2013 Skema kertas 3
SECTION A
No. 1 MARKING CRITERIA MARK
www.banksoalanspm.com
-
SUB TOTAL 1(a) (i) State the manipulated variable correctly
Mass of salt/m 1 1
(ii) State the responding variable correctly Density/
1 1
(iii) State the constant variable correctly Volume of water/type of salt
1 1
(b)(i)&(ii) Tabulate the results for m, and 2
correctly
m/g /gcm -3 2/ (gcm-3 )2 20 1.05 1.10 40 1.45 2.10 60 1.77 3.13 80 2.05 4.20 100 2.29 5.24
Table with 3 columns with labeled and it unit of each quantities All 5 values of correct (if 3 values correct gives 1 mark) All 5 values of 2
All values of consistent of decimal place (two d.p)
is correct (if 3 values correct gives 1 mark)
All values of 2
are consistent to 2 decimal place
Maximum mark
1 2 2 1 1
7
7
(c)
Draw a complete graph of 2 Give a tick () based on the following:
against m ( 5 marks)
A 2 B Uniform scale at both axes
at the y-axis, m at the x-axis
C 5 points plotted correctly [Note : 4 points plotted correctly : ] D Straight line of best fit is drawn ( trough the origin) E Minimum size of graph 5 x 4 big squares (Big square : 2 cm x 2 cm) (From the origin to the last point) Marks awarded :
Number of Marks 6 5
4 5 4 3 3
5
www.banksoalanspm.com
-
2 2 1 1
5 (e) State the correct relationship between sin i and sin r
2
directly proportional to m
1 1
Total 16
No. 2 Markah Marking scheme
2 (a) 1 1
1
Extrapolate the line
Straight line from x-axis at D= 30 kg and straight line to y-axis at d= 19.0
19.0(with unit)
(b) 1 increase
(c)(i) 1
1
1
1
Draw a sufficient large triangle (7 cm vertical)
* Correct substitution(follow candidates triangle)
* State the value /answer with 0.63
No unit (c)(ii)
1
1
1
1=
= 10.63 =1.59
(e) 1
1
-eye position must be perpendicular to scale.
-eye position must be at the meniscus of water.
total 12
No.3 Mark Answer
3 (a) 1 Inference : Volume depends on temperature // temperature influences volume
(b) 1 Hypothesis : If the temperature increases, the volume increases
(c)(i) Aim: To investigate the relationship between volume and temperature (ii) 1
1 Variables : Manipulated : temperature Responding : volume
1 Constant Variable : mass of gas // pressure
(iii) 1 List of apparatus : capillary tube, sulphuric acid, thermometer
, ice/water and Bunsen burner
www.banksoalanspm.com
-
(iv)
1
Arrangement of apparatus:
(v)
1
Control of manipulated variable: Put some ice/water in the beaker and stir until the temperature is . Record the reaching of temperature.
1 Measurement of responding variable: Read and record the length of air trapped.
1 Repeat the experiment 4 times with the difference temperature.
(vi)
Tabulation of data
Temperature, (0 Length/ cm C)
1 2 3 4 5
Terimatanpa unit
(vii) 1
Analysis of data. Plot the graph of volume/length against temperature OR
Accept the symbols and v if the meaning was mentions before
12
www.banksoalanspm.com
-
No. 4 Mark Answer 4 (a) 1 State a suitable inference
The angle of reflection depends on the angle of incidence
4 (b) 1 State relevant hypothesis (with direction)
The angle of reflection increases as the angle of incidence increases.
4(c)Describe a complete and suitable experimental framework 4 c (i)
1
State the aim of the experiment
To investigate the relationship between the angle of incidence and the angle of reflection
4c (ii)
1 1 1
State the manipulated variable and the responding variable
Manipulated variable: Angle of incidence
Responding variable: Angle of reflection
State the constant variable
Fixed variable: position of the plane mirror
4 c(iii)
1 List out the important apparatus and materials
Power supply, white paper, complete set of ripple tank, rheostst, plane reflector, meter rule, hand stroboscope, protactor and water.
4 c(iv) 1
State a functionable arrangement of the apparatus
www.banksoalanspm.com
-
4 c(v)
1 State the method of controlling the manipulated variable
Using stroboscope, draw image of reflactor, the direction of incident wave and direction of reflected wave. Draw straight line for incident and reflected waves. Using protactor fine the i and r
4 c(vi) 1 By using a protractor , the angle of reflection, r is measured
State the method of measuring the responding variable
4c(vii) 1 Reapeat the experiment at least 4 times with different values
The experiment is repeated 4 times with different angles of incidence.
.
4c(viii) 1
Tabulate the data
i/ r/0 0 10.0 20.0 30.0 40.0 50.0
4c(ix)
1
State how data will be analysed (sketch graph/statement)
Plot graph distance between angle of incidence against angle of reflection.
TOTAL 12 ***Eksperimenmenggunakankotaksinarbolehditerima.
www.banksoalanspm.com
2 Give the correct reason2 State the correct explanation/reason.
top related