junior type orifice fitting - den holder
Post on 08-Jan-2022
4 Views
Preview:
TRANSCRIPT
QUALITY CAN BE MEASURED
JUNIOR TYPE ORIFICE FITTINGThe Den Holder Junior Type Orifice Fitting is a single chamber orifice fitting used
with an interchangeable orifice plate and removable sealing O-rings.
JUNIOR TYPE ORIFICE FITTINGThe Den Holder Junior Type Orifice Fitting is a single
chamber orifice fitting used with an interchangeable orifice
plate and removable sealing O-rings. It is designed for simple
and economical checking and replacement of an orifice plate
in orifice plate measurement installations. The few parts of the
fitting are: » the body » the sealing bar » the orifice plate
» the clamping bar with its sets of bolts » the drainplug
» the tapping plugs
The fitting may be installed in any position on either
horizontal or vertical pipelines. If the orifice plate is lifted
trough the top of the fitting, there is no spillage of liquid
service. Before changing plate, the pressure in the line or
meter tube must be relieved.
With the Den Holder Junior Type Orifice Fitting, checking and
replacement of the orifice plate has become a fast, one-man
job that only takes a few actions.
ORDERING DATADESIGN CODES » ISO 5167, ASME B31.3, Stoomwezen
Rules
LINE CONNECTIONS » BW » Flanged
CLASS »150 – 2500 #
FLANGE FACING » RF » RTJ
TYPE OF TAPPINGS » Flange tappings » Corner tappings
» Radius tappings » Pipe tappings
TAPPING SETS » Single » double
PROCESS CONNECTIONS » NPT threaded » Flanged
» Socket Weld » Butt Weld
MATERIAL » On request
OPTIONAL » Inspection by Lloyds, TüV or Stoomweze
» Strength and bore calculations » Gas calibration up to 50 bar
EUROPERivium Boulevard 1014817 ZJ BredaThe Netherlands
Phone +310)88 11 67 600Email: info@denholder.com
MIDDLE EASTP.O. Box 3949Abu Dhabi United Arab Emirates
Phone +971 24 493 841 Fax +971 24 493 824Email: info@denholder.ae
PRECISION ENGINEERING FOR THE OIL AND GAS INDUSTRY
WWW.DENHOLDER.COM
top related