is 15588 (2005): alcoholic drinks - low alcoholic beverages · is 15588:2005 indian standard...
Post on 16-Oct-2020
4 Views
Preview:
TRANSCRIPT
Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS 15588 (2005): Alcoholic Drinks - Low Alcoholic Beverages[FAD 14: Drinks and Carbonated Beverages]
\ n
IS 15588:2005
la-q am?
Indian Standard
ALCOHOLIC DRINKS — LOW ALCOHOLICBEVERAGES
1(3 67.160.10
0 BIS 2005
BUREAU OF INDIAN STANDARDSMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI I1OOO2
Jufy 2005 Price Group 2
.,,
Drinks and Carbonated Beverages Sectional Committee, FAD 14
FOREWORD
This Indian Standard was adopted by the Bureau of Indian Standards, after the draft finalized by the Drinks andCarbonated Beverages Sectional Committee had been approved by the Food and Agriculture Division Council.
Low alcohol beverage is a low alcoholic flavoured beverage, made from any of the alcohol imparting media likeENA, whisky, gin, rum, beer, wine, etc.
In the preparation of this standard, due consideration has been given to the : (a) Prevention of Food AdulterationAct, 1954 and the Rules framed thereunder; (b) Standards of Weights and Measures (Packaged Commodities)Rules, 1977; and (c) State Excise Duty Rules which permit the withdrawal of duty free samples for testimg. It isrecommended that sample for testing by Bureau of Indian Standards, whenever called for, may also be exemptedfrom excise duty. This standard is subject to restrictions imposed under these Rules, wherever applicable.
For the purpose of deciding whether a particular requirement of this standard is complied with, the final value,observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance withIS 2: 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in therounded off value should be the same as that of the specified value in this standard.
AMENDMENT NO. 1 JUNE 2010 TO
IS 15588 : 2005 ALCOHOLIC DRINKS ― LOW ALCOHOLIC BEVERAGES
[Page 2, clause 9.1(d)] ― Substitute ‘Net quantity; and’ for ‘Net volume,
in ml or cl; and’. (FAD 14)
Reprography Unit, BIS, New Delhi, India
IS 15588:2005
Indian Standard
ALCOHOLIC DRINKS — LOW ALCOHOLICBEVERAGES
1 SCOPE
This standard prescribes the requirements, method ofsampling and test for low alcoholic beverage, ready-to-drink.
2 REFERENCES
The standards listed in Annex A contain provisions,which through reference in this text, constituteprovision of this standard. At the time of publication,the editions indicated were valid. All standards aresubject to revision and parties to agreements based onthis standard are encouraged to invutigate thepossibility of applying the most recent editions of thestandards indicated in Annex A.
3 TERMINOLOGY
For the purpose of this standard, definitions given in1S 6749 shall apply.
4 DESCRIPTION
Low alcoholic beverage, ready-to-drink, shall be a lowalcoholic, flavoured beverage made from the mixtureof spirit confirming to IS 6613 or rectified spiritconfirming to Grade 1 of IS 323 or any alcoholicbeverage as base, natural/nature identical/artificialflavours permitted under PFAIFEMA GRAS flavoursand/or CODEX/JECFA food additives andlor fruitjuice with or without added sugar/salt and with orwithout carbonation.
5 HYGIENIC CONDITIONS
Low alcohol beverages shall be manufactured underhygienic conditions as per IS 14348.
6 WATER QUALITY
Water conforming to IS 14543 or IS 13428 or IS 10500with or without demineralization -shall be used.
7 -REQUIREMENT
7.1 Ethyl Alcohol Content
The ethyl alcohol content in low alcohol beveragesshall be within 3 to 8 percent by volume (5.25° to 14°proof) at 20°/200C when determined according to themethod pr~scribed in 4 of IS 3752. l%e tolerance limitsfor ethyl alcohol content shall “be+10.0 percent of thedeclared strength. However, the ethyl alcohol content,its tolerance and method of measurement may varyaccording to the Rules and Regulations prescribed bythe State Excise Authority.
7.2 Freedom from Harmful Ingredients
Low alcohol beverages shall be free from anyingredients injurious to health and shall be free fromsediments or suspended matters except for thecomponents incorporated in colloidal suspension androughage fi-om ffuit pulp/juice.
7.3 Colour and Additives
Low alcohol beverages may contain naturalhaturalidentical/synthetic permitted food colours andadditives as defined by PFA/CODEX/JECFA. The.Iimits shall be in accordance with EU guidelines, ifspecified.
7.4 Taste and Aroma
Low alcohol beverages shall possess the characteristictaste and aroma associated with respective spirits orwines or beer or fruit juices used in the product. Toenhance the characteristic flavour of the product,natural/nature identical/artificial flavours permittedunder PFAIFEMA GRAS may be used.
7.5 Low alcohol beverages shall also comply with therequirements given in Table 1.
8 PACKING
8.1 Low alcohol beverages shall be filled in neutralor non-reactive containers conforming to IS 1107 orIS 12252 or IS 10171 or in any other suitable foodgrade containers. However, container capacity shallbe as per market requirement.
8.1.1 All new containers shall be cleaned accordingto 5.6.1 of IS 14348.
8.1.2 Used bottles (only glass) shall be permitted, ifcleaned in a hygienic way by the manufacturer, asper 5.6.1.1 of IS 14348.
8.2 Carbonation
In case of carbonated RTD low alcoholic beverages,they shall be carbonated with carbon dioxideconforming to Grade 2 of IS 307 to a pressure inaccordance with their character. However, thecarbonated RTD low alcoholic beverages shall have aminimum of one volume of carbon dioxide. Arecommended method for the measurement of gasvolume is given in Annex B.
NOTE — The gas volume is the amount of carbon dioxide thewater will absorbat the normal atmosphericpressure at 15,56T,
8.2.1 For carbonated beverages, the container shall be
IS 15588:2005
able to withstand a minimum pressure of 150 N/cmz(-15 kg/cm2) when tested asper 9.2 (hydrostaticpressure test, Appendix B) of IS 1107.
8.3 ‘I’hecontaine rsshall befilledund erstrictsanitatyconditions as per 4.2 of IS 5837. After filling, thecontainers shall be hermetically sealed.
9 ‘MARKING
9.1 The following particulars shall be marked legiblyand indelibly on the label/crown/body of thecontainer:
a) Name and type of the product;
b) Ethyl alcohol content, in percent, by volume;
a) Batch or code number;
b) Month and year of packing;
c) Name and address of the manufacturer;
d) Net volume, in ml or cl; and
e) Any other markings required under theStandar& of Weights and-lieasures (Packaged
Commodities), Rulesstatitory requirements
.,,
1977, and any other
NOTE —Geographical deaign@iomkrmcsmay trasaed on thelabel solely for products originating tlom hat geographicalregion.
9.2 BM Certification Marking
The product may also be marked with the StandardMark.
9.2.1 The use of the Standard Mark is governed bythe provisions of Bureau ofIndian Stan&r& Act, 1986and the Rules and Regulations made thereunder. Thedetails of conditions under which the license for theuse of Standard Mark maybe granted to manufacturersor producers may be obtained from Bureau of IndianStandards.
10 SAMPLING
Representative samples shall be drawn and conformityof the material in the lot to the requirements of thisspecification shall be determined in accordance withthe method prescribed in IS 3753.
Table 1 Requirements for Low Alcohol Beverages
(Clause 7.5)
S1No. Characteristic Requirement Method of Test,
Ref to
‘Annex Clause N~
(1) (2) (3) (4) (5)
i) pH 2.0-5.0 C of IS 3865 —
ii) Residue on evaporation, percent (m/v), Mux 25 — 5 of IS 3752
iii) Total acids as tartaric acid, percent (m/v), Mux 1.0 — 7 oflS 3752
iv) Sugar, percent (m/v), Ma 20 D oflS 1162 —
v) Methyl alcohol (expressed in terms of fjl 00 Iitres 25 — 16 of IS 3752of absolute alcohol), Mox
vi) Copper (as Cu), parts per million, Max 1.5 — i 5 of 1S6854
vii) Lead (as Pb), parts per million, Mux 0.5 — 14 of IS 6854.
viii) Arsenic (as As), parts per million, Ma 0.25 — 12 of IS 6854
ix) Iron (as Fe), parts pcr million, Mux .0.5 — 13 of 1S6854
2
-.
-IS 15588:2005
1S No.
307:1966
323:1959
1107:1986
1162:1958
2346:1992
3752:2005
3753:1984
3865:2001
5837:1970
6613:2002
ANNEX A
(Clause 2)
LISTOFREFERRED INDIAN STANDARDS
Title
Carbon dioxide (second revision)
Specification for rectified spirit(revised)
Aerated water glass bottles,crown finish type (secondrevision)
Specification for cane molasses
Carbonated beverages (secondrevision)
Alcoholic drinks — Methods oftest (second revision)
Methods of sampling foralcoholic drinks @st revision)
Beer (third revision)
Code for hygienic conditions forsoft drink manufacturing units
Neutral spirit for alcoholic drinks— Specification (first revision)
IS No.
6749:1972
10171:1999
10500:1991
12252:1987
13428:1998
14348:1996
14543:2004
Titie
Glossary of terms relating toalcohol (ethyl) industry andtrade
Guide on suitability of plasticsfor food packaging (secondrevision)
Drinking water (fl-st revision)
Specification for polyalkyleneterephthalates (PET and PBT) fortheir safe use in contact withfoodstuffs, pharmaceuticals anddrinking water
Packaged natural mineral water— Specification (first revision)
Code for hygienic conditions foralcoholic beverage industry
Packaged drinking water (otherthan packaged natural mineralwater) (fwst revision)
ANNEX B
(Clause 8.2)
METHOD OF MEASURING GAS VOLUME
B-1 APPARATUS B-2 PROCEDURE
The apparatus consists of-a pressure gauge having ahollow spike with holes inits side. The bottle is insertedfrom the side into the slot provided in the neck of thecarbon dioxide tester and is secured in place bytightening with a threaded system, The pressure gaugeis inserted until the needlepoint touches the crown cork.There is a sniff valve on the gauge stem, which is keptclosed until the needlepoint of the pressure gauge isforced through the crown cork. The reading is notedon the gauge.
Clamp the bottle in the frame of the gas volumetester. Pierce the crown cork but do not shake thebottle. Sniff off the top gas quickly until the gaugereading drops to zero. Make certain to close thevalve the instant the needle touches zero in the pressuregauge, Shake the bottle vigorously until the gaugegives a reading that additional shaking does notchange. Record the pressure. Note the temperatureand record it. Obtain -the volume of gas from Table 2of IS 2346.
.,
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of Indian Standards Act, 1986 to promoteharmonious development of the activities of standardization, marking and quality certification of goods andattending to connected matters in the country.
Copyright
B[S has the copyright of all its publications. No part of these publications may be reproduced h any formwithout the prior permission in writing of BIS. This does not preclude the tlee use, in the course of implementingthe standard, of necessary details, such as symbols and sizes, type or grade designations. Enquiries relating tocopyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are also reviewedperiodically; a standard along with amendments is reaffirmed when such review indicates that no changes areneeded; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standardsshou Id ascertain that they are in possession of the latest amendments or edition by referring lo the latest issue of‘BIS Catalogue’ and ‘Standards: Monthly Additions’.
This Indian Standard has been developed from “Dot: No. FAD 14 (1533).
Amendments Issued Since Publication
Amend No. Date of Issue Text AfTected
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002Telephones: 23230131,232333’75,2323 9402 website: www.bis.org.in
Regional Offices: Telephones
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg f2323 7617NEW DEL~I 110002 X2323 3841
Eastern :
Northern :
Southern :
Western :
Branches :
1/14 “C.I.T. Scheme VII M, V.I.P. Road, Kankurgachi{
23378499,23378561KOLKATA 700054 23378626,23379120
SCO 335-336, Sector 34-A, CHANDIGARH 160022{
26038432609285
C.1.T. Campus, IV Cross Road, CHENNAI 600113{
22541216,2254144222542519,22542315
Manakalaya, E9 MIDC, Marol, Andheri (East){
28329295,28327858
MUMBAI 400093 28327891,28327892
AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FARIDABAD.GHAZIABAD. GU WAHATI. HYDERABAD. JAIPUR. KANPUR. LUCKNOW. NAGPUR.NALAGARH. PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM. VISAKHAPA.TNAM.
Printed at Simco Printing Press, Delhi
top related