interrupteur micromodule rf 0 882...
Post on 06-Oct-2020
1 Views
Preview:
TRANSCRIPT
�
�
• Interrupteur micromodule RF
0 882 06
LE
0598
8AB
04/14-01 PC
Bouton apprentissage
Bouton de commande
Idéal pour créer un va et vient sans fil nouveau. Doit être associé avec au moins un émetteur radio (commande d’éclairage ou interscénario).
• Description
Voyant vert: apprentissageVoyant rouge: charge activée
L
N
• Câblage
Consignes de sécuritéAvant toute intervention, couper le courant. Respecter strictement les conditions d’installation et d’utilisation.Installer le produit dans un endroit isolé et non directement accessible dans un usage normal.
• Exemple d’installation
Possibilité d’allumage avec interrupteur traditionnel existant: distance maximale 10 mètres
�
�
1
• Caractéristiques
+ 45 °C
Fluocompact Lampe à LED
Lampe incandescente
Lampe halogène
Tube fluorescent
Transformateur ferromagnétique
Transformateur électronique
Puissance maxi 500 W 500 W 150 VA 250 VA 250 VA 150 VA 150 VA (*) 868,3 MHzenviron 150 men champ libre
230 Vac50 Hz
+ 5 °C 1 x 1.5 mm2 Fréquence RF
Portée
(*) avec lampes de même type, de même fabricant.
Le voyant s’éteintLe voyant clignotelentement
Le voyant clignoterapidement
Le voyant flashe
2
Apprentissage de la commande (Scénario)
Etape 1: débuter l’apprentissage (sur l’ÉMETTEUR)
� �
�
� �
Appuyer sur LEARN de l’émetteur
� �
�
� �
Appuyer sur la touche de commande qui doit piloter la lumiére
Etape 2: ajouter un récepteur à la commande (sur le RÉCEPTEUR)
� �
�
� �
Appuyer sur LEARN du récepteur
� �
�
� �
Appuyer sur la touche de commande
Etape 3: enregistrer la commande (sur l’ÉMETTEUR)
� �
�
� �
� �
�
� �
Les voyants de tous les produits s’éteignentLa commande est enregistrée
Modification d’un scénario
Etape 1 : ouvrir le scénario (sur l’ÉMETTEUR)
� �
�
� �
Appuyer sur LEARN de l’émetteur
�
�
� �
� �
Appuyer sur la touche de commande qui doit piloter le scénario
Etape 2: Modifier ou retirer un récepteur à la commande (sur le RÉCEPTEUR)
�
�
� �
� �
Etape 3: enregistrer le scénario (sur l’ÉMETTEUR)
�
�
� �
� �
� �
�
� �
Les voyants de tous les produits s’éteignentLe scénario est enregistré
�
�
� �
� �
Appuyer sur LEARN
ou
Pour supprimer le produitdu scénario passer à l’étape 3
�
�
� �
� �
Appuyer sur la touche de commande que l’on souhaite associer
Les voyants de tous les scénarios clignotent
Appuyer sur LEARN du récepteur
Retour configuration usine
� �
�
� �
Appuyer sur LEARN
�
Le voyant vert clignote rapidement pendant 5 secondes
The directive 1999/5/CE of the european parliamentand of the council of March 9th, 1999
EN 300220-3EN 60669-2-1
CONFORMITY DECLARATION
We declare that the products satisfy the provisions of:
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards:
On condition that they are used in the manner intented and/or in accordance with the current installation standards and/or with the manufacturers recommandations
Channel availability depends on local country regulations. Wireless LAN system administrator must choose correct country of operation. Channels are then automatically configured to comply with specified country's regulations.
• Légende/Voyant Vert
Appuyer sur LEARN de l’émetteur
Appuyer sur LEARN de l’émetteur
Appuyer sur LEARN et maintenir 10 s
Pour ajouter plusieurs récepteurs à la commande, répéter pour chaque récepteur les opérations 3 et 4
�
Emetteur: produit qui commande à distance un ou plusieurs récepteurs. L’émetteur est un produit à pile.
Récepteur: produit connecté à une charge. Le récepteur est obligatoirement un produit connecté au secteur.
The directive 1999/5/CE of the european parliamentand of the council of March 9th, 1999
EN 300220-3EN 60669-2-1
CONFORMITY DECLARATION
We declare that the products satisfy the provisions of:
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards:
On condition that they are used in the manner intented and/or in accordance with the current installation standards and/or with the manufacturers recommandations
Channel availability depends on local country regulations. Wireless LAN system administrator must choose correct country of operation. Channels are then automatically configured to comply with specified country's regulations.
The directive 1999/5/CE of the european parliamentand of the council of March 9th, 1999
EN 300220-3EN 60669-2-1
CONFORMITY DECLARATION
We declare that the products satisfy the provisions of:
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards:
On condition that they are used in the manner intented and/or in accordance with the current installation standards and/or with the manufacturers recommandations
Channel availability depends on local country regulations. Wireless LAN system administrator must choose correct country of operation. Channels are then automatically configured to comply with specified country's regulations.
• Emetteur/Récepteur
top related