instructions - fastly

FS-300 SYSTEMINSTRUCTIONS

1

2

FS-300 SYSTEMTABLE OF CONTENTS

3

FS-300 SYSTEMGENERAL INSTALLATION NOTES

7. Aluminum surfaces in contact with lime-mortar, concrete or other masonry materials, shall be protected with

alkali resistant-coating.

Note: Perimeter sealing of the product to the substrate is not covered under this document. Please refer to the

product's notice of acceptance or Florida building code approval for specifics.

All perimeter caulking and waterproofing should comply with the above mentioned documents and sealant

compatibility and performance should be designed for specific job conditions.

Failure to have an adequate barrier will lead to water intrusion.

4

FS-300 SYSTEMPARTS IDENTIFICATION

5

FS-300 SYSTEMPARTS IDENTIFICATION (Continued)

6

FS-300 SYSTEMTYPICAL WINDOW DETAILS: 9/16" THK. LAM. GL.

7

FS-300 SYSTEMTYPICAL WINDOW DETAILS: 1 5/16" THK. LAM./INS. GL.

8

FS-300 SYSTEMTYPICAL WINDOW DETAILS: 1 5/16" THK. LAM./INS. GL. & T.B.

9

FS-300 SYSTEMTYPICAL WINDOW DETAILS: AT DOOR & TRANSOM.

10

FS-300 SYSTEMFABRICATION: ASSEMBLY SCREW

11

FS-300 SYSTEMFABRICATION: SPECIAL NOTCHES

12

FS-300 SYSTEMSYSTEM ASSEMBLY

13

FS-300 SYSTEMSYSTEM ASSEMBLY (Continued)

14

FS-300 SYSTEMSYSTEM INSTALLATION

15

FS-300 SYSTEMSYSTEM INSTALLATION (Continued)

16

FS-300 SYSTEMSYSTEM INSTALLATION (Continued)

17

FS-300 SYSTEMGLAZING: 9/16" THK. LAM. GLASS

18

FS-300 SYSTEMGLAZING: 1 5/16" THK. LAM./INSULATED GLASS

19

FS-300 SYSTEMGLAZING: 1 5/16" THK. LAM./INSUL. GL. THERMAL BARRIER

20

FS-300 SYSTEMSTEEL REINFORCEMENT