installation process for oracle products

Before start the Installation process :

Against the order installation Dcr will be generated in technical team account with the following information.

Example

For Oracle Based Products:– Server Machine Configuration :

• For Windows– 32 bit Operating System

» Windows 2003 Server (32 bit) or Above.» Oracle9i (Release 9.2 or Above) Server  or Oracle10gR2.» intel® Xeon® (quad-core) up to 2.4 GHz/12 MB/1333 MHz or Intel Xeon (dual-core) up

to 3.0 GHz/6 MB/1333 MHz) , » LAN Card 100/1000 Mbps.» HDD 1 TB or Above 80-100 GB Free space on C drive .

– 64 Bit Operating System» Windows 2003 Server(64bit).*» Oracle10g R2 or Above(64bit). » intel® Xeon® (quad-core) up to 2.4 GHz/12 MB/1333 MHz or Intel Xeon (dual-core) up

to 3.0 GHz/6 MB/1333 MHz) , » LAN Card 100/1000 Mbps.» HDD 1 TB or Above 80-100 GB Free space on C drive .

Note:A Internet connection will be required on the system (in network) for regular product updating and activation Please make sure that Oracle/Windows Must be of Similar bit Size.

1.if you want to use windows 2008 server 64 bit then oracle required must be 64 bit 11g R2 and our software will not work on server machine only oracle database will reside on server machine and software will run on client machine.2.In case of windows 2003 Server(32 bit) Oracle9i Release 9.2 or Oracle10g server(32 bit) & for Windows 2003 Server(64 bit) Oracle10g Server (64 bit) will be required.

Installation process is divided into two parts: Part 1: Oracle Installation. Part2: Shilpi Product’s Installation (capex10, commex10. Fxfuture, Spotxl, Dgcommex, Arbitrage,

Real Time Risk Monitoring, Span, Live Trade, NBFC and MF-Office).

Note: * Install Oracle before installing any product.

* Do not install oracle on drive “C”.

Follow the following steps to install oracle9i:

There should be oracle database dump at which system you are installing software and be sure it will be higher than 9.2.

Path oracle_dump\Oracle-9.2 Stage1\install\win32\setup.exe.

Run Oracle Setup. Oracle Universal Installer :

Welcome window will open. Click on next.

1. Double click on it to run oracle setup

2.Click on next.

3.Click on next.

Enter or select the drive where you want to install oracle and make sure it will be except “C “ Drive.

*There must be at least 40-50 GB space in drive where oracle is being installed

4.Select Oracle9i Database 9.2.0.1.0 if you are installing oracle on database server.

5. Click on next.

6. Select Enterprise Edition.

7.. Click on next.

9. Click on next.

8. Select General Propose.

10. Click on next.

12. Click on next.

11. Enter database name you want to create (for example : SHILPI).

13. Click on next.

14. Click on next.

15. Click on Install.

There are three stage of oracle to be installed . First stage is installing here.

16. Write stage 2 (as shown ) and click on OK.

17. Write stage 3 (as shown ) and click on OK.

18. After completing third stage, Next option enabled. Click on Next.

19. It will create clone database, wait for completion.

20. Wait for completion of database creation.

21. Enter same password in each field (e.g. s). It is mandatory.

22. Click on Exit .

24. Click on yes

23. Installation is completed & Quit from this Oracle Universal Installer.

Step1 : Download Oracle Product Setup File named “oracle_products_setup_file.zip” in any drive (for example E:\) from www.shilpisoft.com under Download Option.

DownloadsDownloads

oracle_products_setup_file.zip

oracle_products_setup_file.zip

Step 2: Extract downloaded file(oracle_products_setup_file.zip). Step 3: Run setup (setup.exe) in F Drive. Following window will open.

1.Click on next.

2.Click on Change to change the path e.g. F This path

displays by default

4.Enter the path of product folder & click on OK.

3. Default path.

5.Click on Next.

6. Click on Install

7.Wait until the process complete & click on Next.

Note: A folder SHILPI is created that you have entered above drive (e.g. : F).

8.Click on finish.

Created folder SHILPI contains deploy10.exe, Dllsetup.exe, licclient.exe, sql.ini , utilcap10.exe ,xsal2ttp.dll and all new product versions files as shown in the given screen.

Run Deploy10 setup automatically after product setup finish . Following window will open:

1.Click on Next.

3.Click on Next.

2.Click on I Accept.

5. Click on Next.

4.Uncheck these Options.

6.Change Directory name.

8.Click on Next

7. Directory name must be same as in step:4 in product setup.

* Change the directory path to where your program folder is. e.g. F:\SHILPI as shown in slide

Showing the installation process of Deploy10

9. Click on Finish

After complete Deploy10 setup , run DLL setup Following window will open DLL setup

1. Click on Next

3.Click on Next

2. Select custom

4.Click on Change to change the path

This path displays by default.

5.Enter path of your product folder.

6.Click on OK.

7.Click on Next.

8. Click on Install.

Wait until the process complete & click on Next

9. Click on Finish

Note: Do not close this window. It will be closed after processing.

Note: Make sure that database must be created before tuning and importing database

Select Oracle VersionEnter password (Password must be same as of Oracle database creation while installing oracle )

Enter Database NameBlank data file and shilpi11.plb automatically download and import i.e. .

Click on this button.

Run licclient.exe and click on tuned database.

Do not close this window because data is importing here.

After importing database file there will be a text document pop up and check the status of database which have been imported,.

Run licclient.exe from product folder. (e.g. F:\SHILPI) Click on Test –I Net Connection , then message must be reflect connection was successful.

2. Click on OK

3.Click on Production Activation

1.Click here to Check internet connection .

Click on Product Activation .Following window will open:

Select New installation

Select Product Type

Enter database name (which is created at the time of oracle installation)

Enter Installation Id given by license department

Click on Get Activation . Following message will display

Go to software folder (for e.g.: F:\SHILPI)

Follow the following steps to make

program shortcut:•Go to software folder and find capex10.exe.•Right click on it. •Click on Send to>>Desktop (create shortcut).•A shortcut will be created on the desktop.

•Double click on icon of capex10.exe.

Now product is ready.

Following window will open

.

Click on default to Login into the software.

Select utility menu. Select Backup of database.

Following window will open:

1. Select drive & enter file name as database name with current date (e.g. SHILPI-15042015) where backup of database will stored.

2.Click on start to take backup

Do not close this window because backup is exporting here.

After exporting backup , there will be a text document pop up and check the status of database you have been exported.

When you close this window following message will display

Message

In Case of other Software’s Installation Database Name should be as following

Software Name Database NameCommex10 SHILPI

FxFuture SHILPI

MF10 SHILPI

NBFC SHILPI

Spot SHILPI

Dgcx SHILPI