installation kit for frequency-control lifts wdgak58b with ... · pensation capabilities. features:...
Post on 23-Jul-2020
8 Views
Preview:
TRANSCRIPT
1 of 2
Wachendorff Automation GmbH & Co. KGIndustriestraße 7 • D-65366 GeisenheimTel.: +49 (0) 67 22/99 65-25 • Fax: +49 (0) 67 22/99 65-70E-Mail: wdg@wachendorff.de • www.wachendorff.de
2016-04-01 / Errors and modifications reserved.
Installation Kit for frequency-control lifts WDGAK58B with shaft encoder
The following installation kits are available for fitting the encoder to a frequency controlled lift. Every installation kit consists:1 x Encoder, 1 x Mountingangle, 1 x shielded cable 15 m length,1 x double loop coupling, 5 x Shaftadapter
Mechanical DataHousing- Clamping flange: Aluminium- Cap: die cast aluminum, powder coated - Durchmesser: 58 mmShaft- Material: stainless steel- Diameter: 10 mm, H7- Lenght: 20 mm- Permitted load max. 220 N radial Load: max. 120 N axial- Starting torque: approx. 1 Ncm at ambient temperatureBearings- Type: 2 precision ball bearings- Service life: 1x 109 U revs. at 100 % shaft load 1x 1010 U revs. at 40 % shaft load 1x 1011 revs. at 20 % shaft loadMax. operating speed: 8000 rpmWeight: approx. 250 gConnections: SH8: radial connector, 8 pin Operating temperature: -20 °C up to +80 °CStorage temperature: -30 °C up to +80 °CMachinery Directive: basic data safety integrity levelMTTFd: 200 a Mission time (TM): 25 aNominale service life 1x 1011 revs. at 8000 rpm and (L10h): 20 % rated shaft loadDiagnostic coverage: 0 %
(DC)
Encoder-Order No.: WDGI58B-10-YYYY-ABN-H24-SH8 - YYYY: with 1024, 2048, 4096 PPR - 3 channels, A, B and zero marker pulse N - H24: 10 - 30 VDC HTL power supply - SH8: radial connector, 8 pin
WDGI58B-10-YYYY-ABN-R05-SH8 - YYYY: with 1024, 2048, 4096 PPR - 6 channels, A, B, zero marker pulse N and inv. - 4,75 - 5 VDC TTL, power supply with inv. output circuit - SH8: radial connector, 8 pin
WDGI58B-10-YYYY-AB-SIN-SH8 - YYYY: with 1024, 2048 PPR - 4 channels, A, B (Sin/Cos) - 4,75 VDC bis 5 VDC, power supply, 1 Vpp Sin/Cos - SH8: radial connector, 8 pinYYYY: Please specify required PPR.
Installation kit WDGAK58B:
Mounting bracket:The mounting bracket makes for easy installation of the encoder in the lift system. However care should be taken that the admissible load of the coupling is adhered to.
Order No.: MW58B
• Complete retrofit set• Quickly and reliably fitted with the aid of the accessories• Cost-effective modernisation solution• TTL, HTL or sin/cos output• Threads: M8, M10, M12, M16 und M20
www.wachendorff-automation.com/wdgak58b
(in use with shaft adapter M8)
ca. 102
3
2.8
12.7
3
42
26
51.2
SH
Pin identification SH8:Function PIN (HTL) PIN (TTL) PIN (Sine)Positive 2 2 2Negative 1 1 1A 3 3 3A inv. - 6 6B 4 4 4B inv. - 7 7N 5 5 -N inv. - 8 -
The view of the soldered side of the connector connector corresponds to the view of the pin arrangement on the encoder.
Cable:The cable is 15 m in length and is shielded, however the shield is not connected to the connector housing at TTL/HTL. With a mated connector, the encoder meets protection class IP40.
The cable has a connection as follows:Function Colour (HTL/TTL) Color (Sine)Positive brown brownNegative white whiteA green greenA inv. red yellowB yellow grayB inv. black rosaN gray -N inv. violet -Shield: cable braiding cable braiding
Order No: KD84015 KD840SIN15
2 von 2
Double loop coupling:The double loop coupling serves to compensate for any mis-alignment between the drive and the encoder. The coupling has extremely high com-pensation capabilities.Features: excellent compensation capabilitiesMax. offset of shafts: axial: max. ±4 mm radial: max. ±3 mm angular: ± 12°Max. operating speed: 3000 rpmStarting torque: max. 200 NcmMaterial:- Hub: zinc-plated- Compensating element: polyurethanWeight: 85 gFixing: DIN 916 M4x6 (4x)Operating temperature: -30 °C up to +80 °C
Shaft adapters
Shaft adapter M8 Order No.: WDGWA10M08
Shaft adapter M10 Order No.: WDGWA10M10
Shaft adapters:The shaft adapters are screwed into an appropriate thread on the lift and allow a simple connection via the double loop coupling.
Shaft adapter M16 Order No.: WDGWA10M16
Shaft adapter M20 Order No.: WDGWA10M20
Ordering information installation kit WDGAK58B:
Description: Order No.:
Installation kit 10-30 VDC HTL WDGAK-58B-YYYY-H24comprising:- WDGI58B-10-YYYY-ABN-H24-SH8 - YYYY: with 1024, 2048, 4096 PPR - 3 channels, A, B, N - H24: 10 - 30 VDC power supply - SH8: radial connector, 8 pin- MW58B- KD84015: 15 m ready-made cable- DSK481010- Shaft adapter: 08, 10, 12, 16, 20
Installation kit 4,75 - 5 VDC, TTL, RS422 WDGAK-58B-YYYY-R05comprising:- WDGI58B-10-YYYY-ABN-R05-SH8 - YYYY: with 1024, 2048, 4096 PPR - 6 channels, A, B, N, A, B, N - R05: 4,75 - 5 VDC TTL power supply with inv. output circuit - SH8: radial connector, 8 pin- MW58B- KD84015: 15 m ready-made cable- DSK481010- Shaft adapter: 08, 10, 12, 16, 20
Installation kit 4,75 - 5 VDC,1Vpp Sin/Cos WDGAK-58B-YYYY-SINcomprising:- WDGI58B-10-YYYY-AB-SIN-SH8 - YYYY: with 1024, 2048 PPR - 4 channels, A, B, A, B - SIN: 4,75 - 5 VDC Sine power supply 1 Vpp Sin/Cos - SH8: radial connector, 8 pin- MW58B- KD840SIN15: 15 m ready-made cable- DSK481010- Shaft adapter: 08, 10, 12, 16, 20
Wellenadapter M12 Bestell-Nr.: WDGWA10M12
Order No.: DSK481010
FrühwarnausgangEarly-warning outputSortie d’alerteSalida de advertencia prematurauscita di preavvertimento
IRLED IRLED
SchaltungCircuitCouplageConmutacióncollegamento
G24, I24, G05, I05,524
high low
Wachendorff Automation GmbH & Co. KGIndustriestraße 7 • D-65366 GeisenheimTel.: +49 (0) 67 22/99 65-25Fax: +49 (0) 67 22/99 65-70eMail: wdg@wachendorff.dewww.wachendorff-automation.de
40S53S53V
40A58B58D58K58N58S58T58V
63Q67Q115T115M
40K58B58D58K58N58S58T58V63B70B
40A50B58A58B58C58D58K58N58T63B
24C30A40A40K50B58A58B58C58D58K58N
Standard (no IP67) Fr max. Fa max.24C, 30A, 40A/K/S, 58K 80 N 50 N50B 120 N 70 N 53S, 53V 20 N 10 N58A 125 N 70 N 58B, 58N, 58T, 63B/Q, 67Q 220 N 120 NWDG58D 400 N 400 NWDGI58D 500 N 500 N70B 200 N 150 N115T/M, 58C 200 N 120 N58S, 58V 100 N 100 N
58A + MG58A
06.04.2020
18
Montageanleitung Vollwellengeber,Assembly instructions shaft encoder, Notice de montage codeur rotatif à arbre plein,Instrucciones de montaje encoder ad albero pieno, istruzioni di montaggio encoders de eje saliente.
Montage nur qualifiziertes Personal, Assembly only qualified personnel, Montage pair qualifié personnel, Montaggio solo personale qualificato, Montaje solamente personal cualificadoSicherheitsmassnahmen/safety instructions: Die Produkte dürfen nur in industrieller Umgebung und im NICHT sicherheitsrelevanten Bereich eingesetzt werden. The products are only designed and produced for use in industrial environments and NOT for use in safety related applications.
Kabel øcable, Câble,Cable, cavo
TemperaturTemperature, Température,Temperatura, Temperatura
R1 R2
≤ 7 mm> 7 mm
31,5 mm41,5 mm
94,5 mm124,5 mm
T > -20 °C (-4 °F)T > -20 °C (-4 °F)
≤ 7 mm> 7 mm
46,5 mm62,3 mm
139,5 mm186,9 mm
T > -40 °C (-40 °F)T > -40 °C (-40 °F)
58S58T58V63B70B
-30 °C...+80 °C(-22 °F...+176 °F)
WDGI (Stecker, connector, connecteur, conector, spina): -40 °C ... +85 °C (-40 °F ... +185 °F)WDG* + WDGI (Kabel, cable, Câble, Cable, cavo)**: -20 °C ... +80 °C (-4 °F ... +176 °F)Option: * -40 °C ... +80 °C (-40 °F ... +176 °F) ** -40 °C ... +85 °C (-40 °F ... +185 °F)1Vss (1Vpp): -10 °C ... +70 °C (14 °F ... +158 °F)58T: -10 °C ... +70 °C (58T: +14 °F ... +158 °F)
L<Lmax: 100 m, 150 m
Schirm, Shield, Blindage, Malla, Schermo
L1/L2/L3: K1/K2/K3:
Erdschleifen vermeiden, Avoid ground loops, Eviter les boucles de masse, Evitar bucles de tierra, Evitare loop di massaSx:
Power supply: Class 2 only
Other countries, please contact your distributor.Autres pays, veuillez contacter votre distributeur.Otros países, rogamos contacten a su distribuidor.Per gli altri paesi si prega di contattare il vostro distributore.
Technical SupportGermany:Tel.: +49 (0) 67 22 / 99 65 131Fax: +49 (0) 67 22 / 99 65 70eMail: support-wdgi@wachendorff.de
Kabel, cable, Câble, Cable, cavo
ACA:24C30A40
ACA:58, 63, 67, 70,
115
58S/V
Stecker, connector, Fiche, Conector, spina M8- M12-Sensorstecker, sensor-connector, Fiche de palpeur, Conecto de sonda, spina sensore
SI5 axial,SH5 radial,
5-pin
SI6 axial,SH6 radial,
6-pin
S2 axial,S3 radial,
7-pin
SI8 axial,SH8 radial,
8-pin
SI12 axial,SH12 radial,
12-pin
S4 axial, S4R axialS5 radial, S5R radial
12-pin
S6 radial,6-pin
S7 axial,4-pin
SK6axial,6-pin
SB4 axial,SC4 radial,
4-pin
SB5 axial,SC5 radial,
5-pin
SB8 axial,SC8 radial,
8-pin
SB12 axial,SC12 radial,
12-pin
K2/L2 axial; K3/L3 radialT3 tangential
K1/K7/L7Schaltung
CircuitCouplage
Conmutacióncollegamento
F/H/05F/H24H30N35
G/F/H/05G/F/H24
H30N35
G/F/H/05G/F/H24
H30N35
F/H05F/H24H30N35
P/R05P/R24
245/645SINR30M35
G/F/H05G/F/H24
H30N35
I/P/R05I/P/R24245, 524
645SIN, SIF
R30M35
G/F/H05G/F/H24
H30N35
I/P/R05I/P/R24245, 524
645SIN, SIF
R30M35
G/F/H/05G/F/H24
H30N35
F/H/05F/H24H30N35
N05N24N30
F/H/05F/H24H30N35
F/H/05F/H24H30N35
F05H05F24H24H30N35
P05R05P24R24R30245645M35
Sinus
G/F05/ H05
G/F24/ H24H30N35
I/P/R05I/P/R24
245524645R30M35
G/F/H05G/F/H24
H30N05 N30N35
R30M05M30
M05M30H24R24M35
I/R/P05I/R/P24
245524645R30M35
I/R/P05I/R/P24
245524645M35
SINSIF
I/R/P05I/R/P24
245524645R30
Minus U- 1 6 1 1 1 K / L K / L 10 10 A 1 3 3 3 1 1 1 3 3 WH WH WH WH WH WH WHPlus U+ 2 1 2 2 2 M / B M / B 12 12 F 2 2 1 1 2 2 2 1 1 BN BN BN BN BN BN BN
A 3 2 3 3 3 E E 5 5 C 3 4 2 4 3 3 3 4 4 GN GN GN GN GN GN GNB 4 4 4 4 4 H H 8 8 B 4 5 4 2 4 4 5 6 6 YE YE YE YE YE GY YE
N 5 3 5 5 5 C C 3 3 D - 1 - 5 5 5 7 8 8 GY GY GY GY GY BK GYFrühwarn-ausgang*1 - 5 6 - - G G 11
11E - - - - - - - 5 5 PK - - PK PK RD PKSin 7
A inv. - - - - 6 - F - 6 - - - - - - 6 4 - 9 - RD RD RD RD YE RDB inv. - - - - 7 - A - 1 - - - - - - 7 6 - 7 - PK BK BK BU PK BUN inv. - - - - 8 - D - 4 - - - - - - 8 8 - 10 - BU VT VT VT VT VT
n. c. - - 7 6, 7, 8 - A, D, F, J
J1, 2, 4,6, 7, 9
2, 7, 9- - 6 - - 6,
7, 8- -
2, 7, 9, 10, 11,
12
2, 11, 12, - - - - - - -Sinus
2, 9, 11 Schirm*2 - - - - - - - - - - - - - - - - - - - Litze, Flex, Toron, Cordón, Cavetto
*1 Frühwarnausgang nur beiEarly-warning output only forSortie d’alerte précoceSalida de advertencia prematurauscita di preavvertimento
G24, I24, G05, I05, 524, SIF (80H/100H/G/I/K)
*2 SchirmShield
Blindage Malla Schermo
Steckergehäuse/Schirm mit Gebergehäuse leitend verbunden. (Nicht S7, K1, K2, K3)Connector housing/shield electrically connected to encoder housing (not S7, K1, K2, K3) Boîtier de connexion/Ecran avec boîtier d’ementteur liés de manière conductrice (No S7, K1, K2, K3) Caja de conector/Malla conectada en conductancia com caja de transmisor (No S7, K1, K2, K3) Scatola prese/Schermo con scatola trasmettitore collegata da condurre (No S7, K1, K2, K3)
Steckergehäuse aus Kunststoff (S7)
Plastic connector housing (S7)Boîtier de connexion en matière plastique (S7)Caja de conector de plástico (S7)scatola prese in plastica (S7)
WH: weiss, white, blanc, blanco, biancoBN: braun, brown, brun, marrón, marroneGN: grün, green, vert, verde, verdeYE: gelb, yellow, jaune, amarillo, gialloGY: grau, grey, gris, gris, grigioPK: rosa, pink, rose, rosa, rosaRD: rot, red, rouge, rojo, rossoBK: schwarz, black, noir, negro, neroBU: blau, blue, bleu, azul, bluVT: violett, violet, violet, violeta, violettoLitze: Litze, Flex, Toron, Cordón, Cavetto
www.wachendorff-automation.dewww.wachendorff-automation.com
40 mA
N05, N24, N30, M05, M24, M30 = 30 mA
R
R30, H30, N30, N35, M30, M35
G24, H24, F24, I24, R24, N24, M24, P24
G05, H05, F05, I05, R05, N05, M05, P05
SIN, SIF
245, 524, 645
≤70 mA
N05, N30, N35, M05, M30, M35 ≤ 40 mA
P05, P24, F05, F24, 645 ≤ 100 mA
top related